- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add hooks in base cxgbe(4) for the iWARP upper-layer driver. Update a
couple of assertions in the TOE driver as well.

cxgbe(4): Some updates to shared code.

Obtained from: Chelsio
MFC after: 1 week

cxgbe(4): Add support for Chelsio's Terminator 5 (aka T5) ASIC. This
includes support for the NIC and TOE features of the 40G, 10G, and
1G/100M cards based on the T5.

The ASIC is mostly backward compatible with the Terminator 4 so cxgbe(4)
has been updated instead of writing a brand new driver. T5 cards will
show up as cxl (short for cxlgb) ports attached to the t5nex bus driver.

Sponsored by: Chelsio

Switch some PCI register reads from using magic numbers to using the names
defined in pcireg.h

MFC after: 1 week

Align the PCI Express #defines with the style used for the PCI-X
#defines. This also has the advantage that it makes the names more
compact, iand also allows us to correct the non-uniform naming of
the PCIM_LINK_* defines, making them all consistent amongst themselves.

This is a mostly mechanical rename:
s/PCIR_EXPRESS_/PCIER_/g
s/PCIM_EXP_/PCIEM_/g
s/PCIM_LINK_/PCIEM_LINK_/g

When this is MFC'd, #defines will be added for the old names to assist
out-of-tree drivers.

Discussed with: jhb
MFC after: 1 week

Use native FreeBSD facilities everywhere except the shared code in common/

MFC after: 1 week

cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.

Many updates to cxgbe(4)

- Device configuration via plain text config file. Also able to operate
when not attached to the chip as the master driver.

- Generic "work request" queue that serves as the base for both ctrl and
ofld tx queues.

- Generic interrupt handler routine that can process any event on any
kind of ingress queue (via a dispatch table).

- A couple of new driver ioctls. cxgbetool can now install a firmware
to the card ("loadfw" command) and can read the card's memory
("memdump" and "tcb" commands).

- Lots of assorted information within dev.t4nex.X.misc.* This is
primarily for debugging and won't show up in sysctl -a.

- Code to manage the L2 tables on the chip.

- Updates to cxgbe(4) man page to go with the tunables that have changed.

- Updates to the shared code in common/

- Updates to the driver-firmware interface (now at fw 1.4.16.0)

MFC after: 1 month

Do not define bool/true/false if the symbols already exist.

MFC after: 2 weeks
Sponsored by: Isilon Systems, LLC

L2 table code. This is enough to get the T4's switch + L2 rewrite
filters working. (All other filters - switch without L2 info rewrite,
steer, and drop - were already fully-functional).

Some contrived examples of "switch" filters with L2 rewriting:

# cxgbetool t4nex0 iport 0 dport 80 action switch vlan +9 eport 3
Intercept all packets received on physical port 0 with TCP port 80 as
destination, insert a vlan tag with VID 9, and send them out of port 3.

# cxgbetool t4nex0 sip 192.168.1.1/32 ivlan 5 action switch \
vlan =9 smac aa:bb:cc:dd:ee:ff eport 0
Intercept all packets (received on any port) with source IP address
192.168.1.1 and VLAN id 5, rewrite the VLAN id to 9, rewrite source mac
to aa:bb:cc:dd:ee:ff, and send it out of port 0.

MFC after: 1 week

Fix a couple of bad races that can occur when a cxgbe interface is taken
down. The ingress queue lock was unused and has been removed as part of
these changes.

- An in-flight egress update from the SGE must be handled before the
queue that requested it is destroyed. Wait for the update to arrive.

- Interrupt handlers must stop processing rx events for a queue before
the queue is destroyed. Events that have not yet been processed
should be ignored once the queue disappears.

MFC after: 1 week

cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters.

MFC after: 3 weeks