#
259065 |
|
07-Dec-2013 |
gjb |
- Copy stable/10 (r259064) to releng/10.0 as part of the 10.0-RELEASE cycle. - Update __FreeBSD_version [1] - Set branch name to -RC1
[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so start releng/10.0 at '100' so the branch is started with a value ending in zero.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
207643 |
|
04-May-2010 |
np |
Add support for hardware filters to cxgb(4). The T3 chip can inspect L2/3/4 headers and can drop or steer packets as instructed. Filtering based on src ip, dst ip, src port, dst port, 802.1q, udp/tcp, and mac addr is possible. Add support in cxgbtool to program these filters. Some simple examples:
Drop all tcp/80 traffic coming from the subnet specified. # cxgbtool cxgb2 filter 0 sip 192.168.1.0/24 dport 80 type tcp action drop
Steer all incoming UDP traffic to qset 0. # cxgbtool cxgb2 filter 1 type udp queue 0 action pass
Steer all tcp traffic from 192.168.1.1 to qset 1. # cxgbtool cxgb2 filter 2 sip 192.168.1.1 type tcp queue 1 action pass
Drop fragments. # cxgbtool cxgb2 filter 3 type frag action drop
List all filters. # cxgbtool cxgb2 filter list index SIP DIP sport dport VLAN PRI P/MAC type Q 0 192.168.1.0/24 0.0.0.0 * 80 0 0/1 */* tcp - 1 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* udp 0 2 192.168.1.1/32 0.0.0.0 * * 0 0/1 */* tcp 1 3 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* frag - 16367 0.0.0.0/0 0.0.0.0 * * 0 0/1 */* * *
MFC after: 2 weeks
|
#
189643 |
|
10-Mar-2009 |
gnn |
Update the Chelsio driver to the latest bits from Chelsio
Firmware upgraded to 7.1.0 (from 5.0.0). T3C EEPROM and SRAM added; Code to update eeprom/sram fixed. fl_empty and rx_fifo_ovfl counters can be observed via sysctl. Two new cxgbtool commands to get uP logic analyzer info and uP IOQs Synced up with Chelsio's "common code" (as of 03/03/09)
Submitted by: Navdeep Parhar at Chelsio Reviewed by: gnn MFC after: 2 weeks
|
#
182679 |
|
02-Sep-2008 |
kmacy |
Import ioctl updates for latest rev of cxgbtool
Obtained from: Chelsio Inc. MFC after: 3 days
|
#
177340 |
|
18-Mar-2008 |
kmacy |
- Integrate 1.133 vendor driver changes - update some copyrights - add improved support for delayed ack - fix issue with fec
|
#
176472 |
|
22-Feb-2008 |
kmacy |
- update firmware to 5.0 - add support for T3C - add DDP support (zero-copy receive) - fix TOE transmit of large requests - fix shutdown so that sockets don't remain in CLOSING state indefinitely - register listeners when an interface is brought up after tom is loaded - fix setting of multicast filter - enable link at device attach - exit tick handler if shutdown is in progress - add helper for logging TCB - add sysctls for dumping transmit queues
- note that TOE wxill not be MFC'd until after 7.0 has been finalized
MFC after: 3 days
|
#
171868 |
|
17-Aug-2007 |
kmacy |
forward port signedness fixes from RELENG_6 fix compile error for case where MSI_SUPPORTED not defined
Approved by: re (blanket)
|
#
171471 |
|
17-Jul-2007 |
kmacy |
- integrate most recent changes from vendor branch and upgrade to firmware revision 4.5.5 - add filter support - further improvements for T304 - recover gracefully from spurious immediate packets
Approved by: re(blanket) Supported by: Chelsio MFC after: 3 days
|
#
169978 |
|
25-May-2007 |
kmacy |
(MFp4) - upgrade to reflect state of 1.0.0.86 - move from firmware rev 3.2 to 4.0.0 - import driver bits for offload functionality - remove binary distribution clause from top level files as it runs counter to the intent of purely supporting the hardware
MFC after: 3 days
|
#
167746 |
|
20-Mar-2007 |
kmacy |
Synchronize with version 1.0.071 of Chelsio's common code (with the notable exception of improvements for using multiple TX queues)
This adds support for the T3B2 ASIC rev
Obtained from: Chelsio MFC after: 3 days
|
#
167514 |
|
14-Mar-2007 |
kmacy |
First of several commits for driver support for the Chelsio T3B 10 Gigabit Ethernet adapter.
Reviewed by: scottl, sam
For those interested in the preliminary performance work see below.
Plots of mxge vs. cxgb running netpipe:
blocksize vs. bandwidth: http://www.fsmware.com/chelsio.random/bsvsbw.gif
blocksize vs. RTT: First of several commits for driver support for the Chelsio T3B 10 Gigabit Ethernet adapter.
Reviewed by: scottl, sam
For those interested in the preliminary performance work see below.
Plots of mxge vs. cxgb running netpipe:
blocksize vs. bandwidth: http://www.fsmware.com/chelsio.random/bsvsbw.gif
blocksize vs. RTT: http://www.fsmware.com/chelsio.random/bsvstime.gif
blocksize vs. RTT for block sizes <= 10kb: http://www.fsmware.com/chelsio.random/bsvstime_10kb.gif http://www.fsmware.com/chelsio.random/bsvstime_10kb3.gif
|