#
259065 |
|
07-Dec-2013 |
gjb |
- Copy stable/10 (r259064) to releng/10.0 as part of the 10.0-RELEASE cycle. - Update __FreeBSD_version [1] - Set branch name to -RC1
[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so start releng/10.0 at '100' so the branch is started with a value ending in zero.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
211347 |
|
15-Aug-2010 |
np |
Fix tx pause quanta and timer calculations.
MFC after: 3 days
|
#
211346 |
|
15-Aug-2010 |
np |
Always reset the XGMAC's XAUI PCS on a link up.
MFC after: 3 days
|
#
199239 |
|
12-Nov-2009 |
np |
The 10GBASE-T card should use an IPG of 1. Also enable the check for low power startup on this card.
|
#
197791 |
|
05-Oct-2009 |
np |
cxgb(4) updates, including: - support for the new Gen-2, BT, and LP-CR cards. - T3 firmware 7.7.0 - shared "common code" updates.
Approved by: gnn (mentor) Obtained from: Chelsio MFC after: 1 month
|
#
189643 |
|
10-Mar-2009 |
gnn |
Update the Chelsio driver to the latest bits from Chelsio
Firmware upgraded to 7.1.0 (from 5.0.0). T3C EEPROM and SRAM added; Code to update eeprom/sram fixed. fl_empty and rx_fifo_ovfl counters can be observed via sysctl. Two new cxgbtool commands to get uP logic analyzer info and uP IOQs Synced up with Chelsio's "common code" (as of 03/03/09)
Submitted by: Navdeep Parhar at Chelsio Reviewed by: gnn MFC after: 2 weeks
|
#
185564 |
|
02-Dec-2008 |
gnn |
Bug fix from Chelsio which addresses the issue of the device resetting when it sees only received packets. In some cases where a device only recieves data it mistakenly thinks that its transmitting side is broken and resets the device.
Obtained from: Chelsio Inc. MFC after: 3 days
|
#
183292 |
|
23-Sep-2008 |
kmacy |
Update cxgb include paths to not require prefixing with dev/cxgb
Submitted by: Chelsio Inc.
|
#
181614 |
|
11-Aug-2008 |
kmacy |
Vendor fix for PHY problem.
Obtained from: Chelsio Inc. MFC after: 3 days
|
#
180583 |
|
18-Jul-2008 |
kmacy |
import vendor fixes to cxgb
|
#
176472 |
|
22-Feb-2008 |
kmacy |
- update firmware to 5.0 - add support for T3C - add DDP support (zero-copy receive) - fix TOE transmit of large requests - fix shutdown so that sockets don't remain in CLOSING state indefinitely - register listeners when an interface is brought up after tom is loaded - fix setting of multicast filter - enable link at device attach - exit tick handler if shutdown is in progress - add helper for logging TCB - add sysctls for dumping transmit queues
- note that TOE wxill not be MFC'd until after 7.0 has been finalized
MFC after: 3 days
|
#
172096 |
|
08-Sep-2007 |
kmacy |
- fix qset to port binding as a proper fix for the problems encountered on the 4-port - fix the use after free seen when sending packets small enough to fit as an immediate and bpf peers are present - update to firmware rev 4.7 along with various small vendor fixes
Supported by: Chelsio Approved by: re (blanket) MFC after: 3 days
|
#
171471 |
|
17-Jul-2007 |
kmacy |
- integrate most recent changes from vendor branch and upgrade to firmware revision 4.5.5 - add filter support - further improvements for T304 - recover gracefully from spurious immediate packets
Approved by: re(blanket) Supported by: Chelsio MFC after: 3 days
|
#
170654 |
|
13-Jun-2007 |
kmacy |
- import new common code for the T304 - update to firmware version 4.1.0
- switch over to standard method for initializing cdevs (contributed by scottl@) - break out timer_reclaim_task to be per-port - move msix teardown into separate function - fix bus_setup_intr for msi-x for the multi-port case so that msi-x resources are not corrupted on unload - handle 10/100/1000 base-T media and auto negotiation - bind qset to cpu even for singleq case - white space cleanups - remove recursive PORT_LOCK - move mtu setting to separate function - stop and re-init port when changing mtu - replace all direct references to m_data with calls to mtod - handle attach failure better by not trying to de-initialize taskqueues when they have not been allocated - no longer default to jumbo frames
Sponsored by: Chelsio MFC after: 3 days
|
#
170076 |
|
28-May-2007 |
kmacy |
When building cxgb as a module make include paths relative to the driver's root. This will make it possible to build the module out of tree against an older src tree.
MFC after: 3 days
|
#
169978 |
|
25-May-2007 |
kmacy |
(MFp4) - upgrade to reflect state of 1.0.0.86 - move from firmware rev 3.2 to 4.0.0 - import driver bits for offload functionality - remove binary distribution clause from top level files as it runs counter to the intent of purely supporting the hardware
MFC after: 3 days
|
#
167746 |
|
20-Mar-2007 |
kmacy |
Synchronize with version 1.0.071 of Chelsio's common code (with the notable exception of improvements for using multiple TX queues)
This adds support for the T3B2 ASIC rev
Obtained from: Chelsio MFC after: 3 days
|
#
167514 |
|
14-Mar-2007 |
kmacy |
First of several commits for driver support for the Chelsio T3B 10 Gigabit Ethernet adapter.
Reviewed by: scottl, sam
For those interested in the preliminary performance work see below.
Plots of mxge vs. cxgb running netpipe:
blocksize vs. bandwidth: http://www.fsmware.com/chelsio.random/bsvsbw.gif
blocksize vs. RTT: First of several commits for driver support for the Chelsio T3B 10 Gigabit Ethernet adapter.
Reviewed by: scottl, sam
For those interested in the preliminary performance work see below.
Plots of mxge vs. cxgb running netpipe:
blocksize vs. bandwidth: http://www.fsmware.com/chelsio.random/bsvsbw.gif
blocksize vs. RTT: http://www.fsmware.com/chelsio.random/bsvstime.gif
blocksize vs. RTT for block sizes <= 10kb: http://www.fsmware.com/chelsio.random/bsvstime_10kb.gif http://www.fsmware.com/chelsio.random/bsvstime_10kb3.gif
|