- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Introduce a non-portable function pthread_getthreadid_np(3) to retrieve
calling thread's unique integral ID, which is similar to AIX function of
the same name. Bump __FreeBSD_version to note its introduction.

Reviewed by: kib

Add cpu affinity APIs to get and set thread's cpu affinity mask, the
functions are intented to be are compatible with glibc.

Per discussion on -threads, rename _islocked_np() to _isowned_np().

Add pthread_mutex_islocked_np(), a cheap way to verify that a mutex is
locked. This is intended primarily to support the userland equivalent
of the various *_ASSERT_LOCKED() macros we have in the kernel.

MFC after: 2 weeks

1. Add function pthread_mutex_setspinloops_np to turn a mutex's spin
loop count.
2. Add function pthread_mutex_setyieldloops_np to turn a mutex's yield
loop count.
3. Make environment variables PTHREAD_SPINLOOPS and PTHREAD_YIELDLOOPS
to be only used for turnning PTHREAD_MUTEX_ADAPTIVE_NP mutex.

Remove 3rd clause and renumber after getting permission from the
author (quite some time ago).

Add pthread_timedjoin_np prototype.

pthread_attr_get_np() now takes 'pthread_t' (not 'pthread_t *')
to be consistent with other pthread_XXX functions

Prototype for pthread_attr_get_np().

fix pthread_suspend/resume_all_np() declarations

Approved by: deischen

Reorder prototypes to be in alphabetical order.

Add the prototypes for pthread_suspend_all_np and pthread_resume_all_np.

Breath deep and take __P out of the system include files.

# This appears to not break X11, but I'm having problems compiling the
# glide part of the server with or without this patch, so I can't tell
# for sure.

Make the name parameter const char *.

Bring in a hybrid of SunSoft's transport-independent RPC (TI-RPC) and
associated changes that had to happen to make this possible as well as
bugs fixed along the way.

Bring in required TLI library routines to support this.

Since we don't support TLI we've essentially copied what NetBSD
has done, adding a thin layer to emulate direct the TLI calls
into BSD socket calls.

This is mostly from Sun's tirpc release that was made in 1994,
however some fixes were backported from the 1999 release (supposedly
only made available after this porting effort was underway).

The submitter has agreed to continue on and bring us up to the
1999 release.

Several key features are introduced with this update:
Client calls are thread safe. (1999 code has server side thread
safe)
Updated, a more modern interface.

Many userland updates were done to bring the code up to par with
the recent RPC API.

There is an update to the pthreads library, a function
pthread_main_np() was added to emulate a function of Sun's threads
library.

While we're at it, bring in NetBSD's lockd, it's been far too
long of a wait.

New rpcbind(8) replaces portmap(8) (supporting communication over
an authenticated Unix-domain socket, and by default only allowing
set and unset requests over that channel). It's much more secure
than the old portmapper.

Umount(8), mountd(8), mount_nfs(8), nfsd(8) have also been upgraded
to support TI-RPC and to support IPV6.

Umount(8) is also fixed to unmount pathnames longer than 80 chars,
which are currently truncated by the Kernel statfs structure.

Submitted by: Martin Blapp <mb@imp.ch>
Manpage review: ru
Secure RPC implemented by: wpaul

Cleanups to the pthread header files.

Submitted by: Ralf S. Engelschall <rse@engelschall.com>
Reviewed by: John Birrell <jb@cimlogic.com.au>

o Runnable threads are now maintained in priority queues. The
implementation requires two things:

1.) The priority queues must be protected during insertion
and removal of threads. Since the kernel scheduler
must modify the priority queues, a spinlock for
protection cannot be used. The functions
_thread_kern_sched_defer() and _thread_kern_sched_undefer()
were added to {un}defer kernel scheduler activation.

2.) A thread (active) priority change can be performed only
when the thread is removed from the priority queue. The
implementation uses a threads active priority when
inserting it into the queue.

A by-product is that thread switches are much faster. A
separate queue is used for waiting and/or blocked threads,
and it is searched at most 2 times in the kernel scheduler
when there are active threads. It should be possible to
reduce this to once by combining polling of threads waiting
on I/O with the loop that looks for timed out threads and
the minimum timeout value.

o Functions to defer kernel scheduler activation were added. These
are _thread_kern_sched_defer() and _thread_kern_sched_undefer()
and may be called recursively. These routines do not block the
scheduling signal, but latch its occurrence. The signal handler
will not call the kernel scheduler when the running thread has
deferred scheduling, but it will be called when running thread
undefers scheduling.

o Added support for _POSIX_THREAD_PRIORITY_SCHEDULING. All the
POSIX routines required by this should now be implemented.
One note, SCHED_OTHER, SCHED_FIFO, and SCHED_RR are required
to be defined by including pthread.h. These defines are currently
in sched.h. I modified pthread.h to include sched.h but don't
know if this is the proper thing to do.

o Added support for priority protection and inheritence mutexes.
This allows definition of _POSIX_THREAD_PRIO_PROTECT and
_POSIX_THREAD_PRIO_INHERIT.

o Added additional error checks required by POSIX for mutexes and
condition variables.

o Provided a wrapper for sigpending which is marked as a hidden
syscall.

o Added a non-portable function as a debugging aid to allow an
application to monitor thread context switches. An application
can install a routine that gets called everytime a thread
(explicitly created by the application) gets context switched.
The routine gets passed the pthread IDs of the threads that are
being switched in and out. I found this useful, but we can
get rid of it if you want.

Submitted by: Dan Eischen <eischen@vigrid.com>

Add a function prototype to set the name of a thread for debugging
purposes.

Back out all of yesterdays include file changes.

Make a lot of include-files self-contained. I excluded the patches changing
int's to gid_t and uid_t - should I commit these, too?

Closes PR misc/2625.

Submitted by: Julian Assange <proff@iq.org>

Prototype pthread_mutexattr_getkind_np() and pthread_mutexattr_setkind_np().

Submitted by: John Birrell <cimaxp1!jb@werple.net.au>

Here are the diffs for libc_r to get it one step closer to P1003.1c
These make most of the thread/mutex/condvar structures opaque to the
user. There are three functions which have been renamed with _np
suffixes because they are extensions to P1003.1c (I did them for JAVA,
which needs to suspend/resume threads and also start threads suspended).

I've created a new header (pthread_np.h) for the non-POSIX stuff.

The egrep tags stuff in /usr/src/lib/libc_r/Makefile that I uncommented
doesn't work. I think its best to delete it. I don't think libc_r needs
tags anyway, 'cause most of the source is in libc which does have tags.

also:

Here's the first batch of man pages for the thread functions.
The diff to /usr/src/lib/libc_r/Makefile removes some stuff that was
inherited from /usr/src/lib/libc/Makefile that should only be done with
libc.

also:

I should have sent this diff with the pthread(3) man page.
It allows people to type

make -DWANT_LIBC_R world

to get libc_r built with the rest of the world. I put this in the
pthread(3) man page. The default is still not to build libc_r.


also:
The diff attached adds a pthread(3) man page to /usr/src/share/man/man3.
The idea is that without libc_r installed, this man page will give people
enough info to know that they have to build libc_r.