Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

userret() already checks for td_locks when INVARIANTS is enabled, so
there is no need to check if Giant is acquired after it.

Reviewed by: kib
MFC after: 1 week

Copy i386 psl.h to x86 and replace amd64/i386/pc98 psl.h with stubs.

Inline the syscallenter() and syscallret(). This reduces the time measured
by the syscall entry speed microbenchmarks by ~10% on amd64.

Submitted by: jhb
Approved by: re (bz)
MFC after: 2 weeks

Change ia64' struct syscall_args definition so that args is a pointer to
the arguments array instead of array itself. ia64 syscall arguments are
readily available in the frame, point args to it, do not do unnecessary
bcopy. Still reserve the array in syscall_args for ia32 emulation.

Suggested and reviewed by: marcel
MFC after: 1 month

Reorganize syscall entry and leave handling.

Extend struct sysvec with three new elements:
sv_fetch_syscall_args - the method to fetch syscall arguments from
usermode into struct syscall_args. The structure is machine-depended
(this might be reconsidered after all architectures are converted).
sv_set_syscall_retval - the method to set a return value for usermode
from the syscall. It is a generalization of
cpu_set_syscall_retval(9) to allow ABIs to override the way to set a
return value.
sv_syscallnames - the table of syscall names.

Use sv_set_syscall_retval in kern_sigsuspend() instead of hardcoding
the call to cpu_set_syscall_retval().

The new functions syscallenter(9) and syscallret(9) are provided that
use sv_*syscall* pointers and contain the common repeated code from
the syscall() implementations for the architecture-specific syscall
trap handlers.

Syscallenter() fetches arguments, calls syscall implementation from
ABI sysent table, and set up return frame. The end of syscall
bookkeeping is done by syscallret().

Take advantage of single place for MI syscall handling code and
implement ptrace_lwpinfo pl_flags PL_FLAG_SCE, PL_FLAG_SCX and
PL_FLAG_EXEC. The SCE and SCX flags notify the debugger that the
thread is stopped at syscall entry or return point respectively. The
EXEC flag augments SCX and notifies debugger that the process address
space was changed by one of exec(2)-family syscalls.

The i386, amd64, sparc64, sun4v, powerpc and ia64 syscall()s are
changed to use syscallenter()/syscallret(). MIPS and arm are not
converted and use the mostly unchanged syscall() implementation.

Reviewed by: jhb, marcel, marius, nwhitehorn, stas
Tested by: marcel (ia64), marius (sparc64), nwhitehorn (powerpc),
stas (mips)
MFC after: 1 month

Rework the PCPU_* (MD) interface:
- Rename PCPU_LAZY_INC into PCPU_INC
- Add the PCPU_ADD interface which just does an add on the pcpu member
given a specific value.

Note that for most architectures PCPU_INC and PCPU_ADD are not safe.
This is a point that needs some discussions/work in the next days.

Reviewed by: alc, bde
Approved by: jeff (mentor)

Add audit hooks for ppc, ia64 system call paths.

Reviewed by: marcel (ia64)
Obtained from: TrustedBSD Project
MFC after: 3 days

Retire SYF_ARGMASK and remove both SYF_MPSAFE and SYF_ARGMASK. sy_narg is
now back to just being an argument count.

Now that all system calls are MPSAFE, retire the SYF_MPSAFE flag used to
mark system calls as being MPSAFE:
- Stop conditionally acquiring Giant around system call invocations.
- Remove all of the 'M' prefixes from the master system call files.
- Remove support for the 'M' prefix from the script that generates the
syscall-related files from the master system call files.
- Don't explicitly set SYF_MPSAFE when registering nfssvc.

Unify the checking for lock misbehavior in the various syscall()
implementations and adjust some of the checks while I'm here:
- Add a new check to make sure we don't return from a syscall in a critical
section.
- Add a new explicit check before userret() to make sure we don't return
with any locks held. The advantage here is that we can include the
syscall number and name in syscall() whereas that info is not available
in userret().
- Drop the mtx_assert()'s of sched_lock and Giant. They are replaced by
the more general checks just added.

MFC after: 2 weeks

Add KTR_SYSC tracing to the syscall() implementations that didn't have it
yet.

MFC after: 1 week

Add missing ptrace(2) system-call stops to various syscall()
implementations.

MFC after: 1 week

Simplify system time accounting for profiling.

Rename struct thread's td_sticks to td_pticks, we will need the
other name for more appropriately named use shortly. Reduce it
from uint64_t to u_int.

Clear td_pticks whenever we enter the kernel instead of recording
its value as reference for userret(). Use the absolute value of
td->pticks in userret() and eliminate third argument.

1. Change prototype of trapsignal and sendsig to use ksiginfo_t *, most
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.

2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.

3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.

4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.

5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.

6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.

Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64

Use PCPU_LAZY_INC() for cnt.v_{intr,trap,syscalls} rather than atomic
operations in some places and simple non-per CPU math in others.

/* -> /*- for copyright notices, minor format tweaks as necessary

...And fix WITNESS builds: declare syscallnames.

Fix INVARIANTS build: Include <machine/cpu.h>.

Move the IA-32 trap handling from trap() to ia32_trap(). Move the
ia32_syscall() function along with it to ia32_trap.c. When COMPAT_IA32
is not defined, we'll raise SIGEMT instead.