Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Resolve a LOR after r246616. Protect control requests using the USB device
enumeration lock. Make sure all callers of usbd_enum_lock() check the return
value. Remove the control transfer specific lock. Bump the FreeBSD version
number, hence external USB modules may need to be recompiled due to a USB
device structure change.

MFC after: 1 week

Modify the FreeBSD USB kernel code so that it can be compiled directly
into the FreeBSD boot loader, typically for non-USB aware BIOSes, EFI systems
or embedded platforms. This is also useful for out of the system compilation
of the FreeBSD USB stack for various purposes. The USB kernel files can
now optionally include a global header file which should include all needed
definitions required to compile the FreeBSD USB stack. When the global USB
header file is included, no other USB header files will be included by
default.

Add new file containing the USB stack configuration for the
FreeBSD loader build.

Replace some __FBSDID()'s by /* $FreeBSD$ */ comments. Now all
USB files follow the same style.

Use cases:
- console in loader via USB
- loading kernel via USB

Discussed with: Hiroki Sato, hrs @ EuroBSDCon

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

USB core:
- add support for defragging of written device data.
- improve handling of alternate settings in device side mode.
- correct return value from usbd_get_no_alts() function.
- reported by: HPS
- P4 ID: 166156, 166168

- report USB device release information to devd and pnpinfo.
- reported by: MIHIRA Sanpei Yoshiro
- P4 ID: 166221

Submitted by: hps
Approved by: re

- Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h

Fix _USB2_* refernces in the header protection defines.

s/usb2_/usb_|usbd_/ on all function names for the USB stack.

Place the fifo and ref counting variables on the stack to prevent races.

Submitted by: Hans Petter Selasky

Revert the size_t part of the last commit for the moment, this blows up the
USB_ADD_BYTES macro.

s/usb2_/usb_/ on all typedefs for the USB stack.

s/usb2_/usb_/ on all C structs for the USB stack.

Remove pointeless mergeinfo that crept in from r190633.

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

MFp4 //depot/projects/usb @159431,159437,159438

- start using the new USB typedefs in the USB core
- Remove usage of USB_ADD_BYTES()

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb 159225,159241,159292

Fix regression issue in the USB file system interface.
- Use cdev_privdata pointer as indicator of correct file handle.
- Remove redundant FIFO opened flags.

Don't send ZLP at close for ulpt and uscanner devices as this causes some
models to stop working. This reverts back to the USB1 behaviour.

Submitted by: Hans Petter Selasky

- Remove the usb interface number from the device nodes as it is not needed.
- Do not recreate the device nodes in set_alt_interface as the endpoints do not
change.

Submitted by: Hans Petter Selasky

Change USB over to make_dev() for all device nodes, previously it hooked into
the devfs clone handler to open the (invisible) devices on the fly.

The /dev entries are layed out as follows,

/dev/usbctl = master device
/dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>)
/dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint

This also removes the custom permissions model from USB. Bump
__FreeBSD_version to 800066.

Submitted by: rink (earlier version)

Move the new USB stack into its new home.

Format and wrap function declarations.

src/sys/dev/usb2/controller/uss820dci_pccard.c
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h

These files are not used any more.

src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist

Make "usbconfig" and "libusb20" a part of the default build.

src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c

Use common include file.

src/sys/dev/usb2/bluetooth/ng_ubt2.c

Make USB bluetooth depend on "ng_hci" module.

src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h

Patches for Marvell EHCI.

src/sys/dev/usb2/core/usb2_busdma.c

Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.

src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h

Bugfix for libusb filesystem interface.

New feature: Add support for filtering device data at the expense of the
userland process.

Add some more comments.

Some minor code styling.

Remove unused function, usb2_fifo_get_data_next().

Fix an issue about "fifo_index" being used instead of "ep_index".

src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c

Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.

Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.

src/sys/dev/usb2/core/usb2_hub.c

Improvement: Check all USB HUB ports by default at least one time.

src/sys/dev/usb2/core/usb2_request.c

Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.

Improvement: Skip invalid characters instead of replacing with a dot.

src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c

Spelling.

src/sys/dev/usb2/include/Makefile

Share "usbdevs" with the old USB stack.

src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h

Regenerate files.

Alfred: Please fix the RCS tag at the top.

src/sys/dev/usb2/include/usb2_ioctl.h

Fix compilation of "kdump".

src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c

Remove device ID's which will end up in a new 3G driver.

src/sys/dev/usb2/sound/uaudio2.c

Correct a debug printout.

src/sys/dev/usb2/storage/umass2.c

Sync with old USB stack.

src/lib/libusb20/libusb20.3

Add more documentation.

src/lib/libusb20/libusb20.c

Various bugfixes and improvements.

src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c

New commands for dumping strings and doing custom USB requests from
the command line.

Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred