#
284034 |
|
05-Jun-2015 |
jhb |
MFC 274633,274639,274663,277233-277235,281870,281871,281873,281874: Various fixes for suspend and resume of PCI to PCI and PCI to Cardbus bridges.
274633:
Remove stray empty comment. The code is adequately explained in the block comment above, so there's nothing to add here.
274639:
Modernize comments about BIOSes being lame since in this detail they aren't lame, the rules changed along the way. Catch up to 1999 or so with the new rules.
274663:
Fix typo pointed out by avg@ and Joerg Sonnenberger. Add a clarifying sentence too.
277233:
Suspend and resume were the only two functions not to follow the brdev convention here, so fix that.
277234:
Move the suspsned and resume functions to the bus attachment. They were accessing PCI config registers, which won't work for the ISA version.
277235:
Always enable I/O, memory and dma cycles. Some BIOSes don't enable them, sometimes they are reset for power state transitions or during whatever happens while suspended. Also, it is good practice to always do this.
281870:
Cosmetic change: use PCIR_SECLAT_2 rather than PCIR_SECLAT_1.
281871:
The minimim grant and maximum latency PCI config registers are only valid for type 0 devices, not type 1 or 2 bridges. Don't read them for bridge devices during bus scans and return an error when attempting to read them as ivars for bridge devices.
281873:
Don't explicitly manage power states for PCI-PCI bridge devices in the driver's suspend and resume routines. These have been redundant no-ops since r214065 changed the PCI bus driver to manage power states for all devices (including type 1/2 bridge devices) during suspend and resume.
281874:
Update the pci_cfg_save/restore routines to operate on bridge devices (type 1 and type 2) as well as leaf devices (type 0). In particular, this allows the existing PCI bus logic to save and restore capability registers such as MSI and PCI-express work for bridge devices rather than requiring that code to be duplicated in bridge drivers. It also means that bridge drivers no longer need to save and restore basic registers such as the PCI command register or BARs nor manage powerstates for the bridge device.
While here, pci_setup_secbus() has been changed to initialize the 'sec' and 'sub' fields in the 'secbus' structure instead of requiring the pcib and pccbb drivers to do this in the NEW_PCIB + PCI_RES_BUS case.
|
#
280970 |
|
01-Apr-2015 |
jhb |
MFC 261790: Add support for managing PCI bus numbers. As with BARs and PCI-PCI bridge I/O windows, the default is to preserve the firmware-assigned resources. PCI bus numbers are only managed if NEW_PCIB is enabled and the architecture defines a PCI_RES_BUS resource type. - Add a helper API to create top-level PCI bus resource managers for each PCI domain/segment. Host-PCI bridge drivers use this API to allocate bus numbers from their associated domain. - Change the PCI bus and CardBus drivers to allocate a bus resource for their bus number from the parent PCI bridge device. - Change the PCI-PCI and PCI-CardBus bridge drivers to allocate the full range of bus numbers from secbus to subbus from their parent bridge. The drivers also always program their primary bus register. The bridge drivers also support growing their bus range by extending the bus resource and updating subbus to match the larger range. - Add support for managing PCI bus resources to the Host-PCI bridge drivers used for amd64 and i386 (acpi_pcib, mptable_pcib, legacy_pcib, and qpi_pcib). - Define a PCI_RES_BUS resource type for amd64 and i386.
PR: 197076
|
#
284034 |
|
05-Jun-2015 |
jhb |
MFC 274633,274639,274663,277233-277235,281870,281871,281873,281874: Various fixes for suspend and resume of PCI to PCI and PCI to Cardbus bridges.
274633:
Remove stray empty comment. The code is adequately explained in the block comment above, so there's nothing to add here.
274639:
Modernize comments about BIOSes being lame since in this detail they aren't lame, the rules changed along the way. Catch up to 1999 or so with the new rules.
274663:
Fix typo pointed out by avg@ and Joerg Sonnenberger. Add a clarifying sentence too.
277233:
Suspend and resume were the only two functions not to follow the brdev convention here, so fix that.
277234:
Move the suspsned and resume functions to the bus attachment. They were accessing PCI config registers, which won't work for the ISA version.
277235:
Always enable I/O, memory and dma cycles. Some BIOSes don't enable them, sometimes they are reset for power state transitions or during whatever happens while suspended. Also, it is good practice to always do this.
281870:
Cosmetic change: use PCIR_SECLAT_2 rather than PCIR_SECLAT_1.
281871:
The minimim grant and maximum latency PCI config registers are only valid for type 0 devices, not type 1 or 2 bridges. Don't read them for bridge devices during bus scans and return an error when attempting to read them as ivars for bridge devices.
281873:
Don't explicitly manage power states for PCI-PCI bridge devices in the driver's suspend and resume routines. These have been redundant no-ops since r214065 changed the PCI bus driver to manage power states for all devices (including type 1/2 bridge devices) during suspend and resume.
281874:
Update the pci_cfg_save/restore routines to operate on bridge devices (type 1 and type 2) as well as leaf devices (type 0). In particular, this allows the existing PCI bus logic to save and restore capability registers such as MSI and PCI-express work for bridge devices rather than requiring that code to be duplicated in bridge drivers. It also means that bridge drivers no longer need to save and restore basic registers such as the PCI command register or BARs nor manage powerstates for the bridge device.
While here, pci_setup_secbus() has been changed to initialize the 'sec' and 'sub' fields in the 'secbus' structure instead of requiring the pcib and pccbb drivers to do this in the NEW_PCIB + PCI_RES_BUS case.
|
#
280970 |
|
01-Apr-2015 |
jhb |
MFC 261790: Add support for managing PCI bus numbers. As with BARs and PCI-PCI bridge I/O windows, the default is to preserve the firmware-assigned resources. PCI bus numbers are only managed if NEW_PCIB is enabled and the architecture defines a PCI_RES_BUS resource type. - Add a helper API to create top-level PCI bus resource managers for each PCI domain/segment. Host-PCI bridge drivers use this API to allocate bus numbers from their associated domain. - Change the PCI bus and CardBus drivers to allocate a bus resource for their bus number from the parent PCI bridge device. - Change the PCI-PCI and PCI-CardBus bridge drivers to allocate the full range of bus numbers from secbus to subbus from their parent bridge. The drivers also always program their primary bus register. The bridge drivers also support growing their bus range by extending the bus resource and updating subbus to match the larger range. - Add support for managing PCI bus resources to the Host-PCI bridge drivers used for amd64 and i386 (acpi_pcib, mptable_pcib, legacy_pcib, and qpi_pcib). - Define a PCI_RES_BUS resource type for amd64 and i386.
PR: 197076
|