MFC r327497, r327498: fix memory disclosure in hpt* ioctls

r327497: hpt27xx: plug info leak in hpt_ioctl

The hpt27xx ioctl handler allocates a buffer without M_ZERO and calls
hpt_do_ioctl(), which might not overwrite the entire buffer.

Also zero bytesReturned in case it is not written by hpt_do_ioctl().

The hpt27xx device has permissions only for root so this is not urgent,
and the fix can be MFCd and considered for a future EN.

Reported by: Ilja van Sprundel <ivansprundel@ioactive.com>
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com> (M_ZERO)

r327498: hpt{nr,rr}: plug info leak in hpt_ioctl

The hpt{nr,rr} ioctl handler allocates a buffer without M_ZERO and calls
hpt_do_ioctl(), which might not overwrite the entire buffer.

Also zero bytesReturned in case it is not written by hpt_do_ioctl().

The hpt27{nr,rr} device has permissions only for root so this is not urgent,
and the fix can be MFCd and considered for a future EN.

The same issue was reported in the hpt27xx driver by Ilja Van Sprundel.

Security: memory disclosure in root-only ioctls
Sponsored by: The FreeBSD Foundation

MFC r325383:

Avoid calling get_controller_count() until attaching, this would avoid
costly PCI config space operations that slows down systems without the
hardware.

Many thanks to HighPoint for continued support of FreeBSD!

Submitted by: Steve Chang
Reported by: cperciva

MFC r311305 (by asomers):
Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)

The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".

This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.

PR: 215474
Reported by: Coverity
CID: 1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID: 1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID: 1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID: 1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID: 1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID: 1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID: 1010035 1010036 1010042 1010041 1010040 1010039

MFC r313554:
Clean redundant MIN/MAX declarations in some HighPoint drivers.

The hpt27xx(4), hptnr(4), and hptrr(4) drivers declare MIN() and MAX()
internally which match the macros from sys/param.h.

MIN() is not used, MAX is only used once and can be replaced with the
max() version in libkern.h which operates on u_ints.

MFC after: 2 weeks

MFC r284792:

Merge changes from vendor driver 1.1.4:

v1.1.4 2015-06-09
* Fix a bug that FailLED was not initialized properly.
v1.1.3 2015-05-19
* Support Report Luns command.
v1.1.2 2015-05-05
* Fix a bug that report wrong physical sector size for 512e HDD.

Many thanks to HighPoint for continued support of FreeBSD!

This driver update is intended for 10.2-RELEASE.

Submitted by: Steve Chang

MFC r281387:

Merge changes from vendor driver version 1.1.1:

v1.1.1 2015-03-26
* Support 4Kn drive.
* Change the SCSI target ID of the disk to be the index of physical
connetion to the HBA.
* Support staggered drive spin up.
* Fix a bug that command would be timeout because of improper
interrupt service routine.
* Error handling to avoid scsi command lost which caused system
hang up.
* Fix a bug that fail to get the devcie's serial number via
FreeNAS WebGUI.

Many thanks to HighPoint for continued support of FreeBSD!

Relnotes: yes

MFC r269613:
Various fixes to hptnr(4)

Sponsored by: Multiplay

MFC r270384:

Update hptnr(4) driver to version 1.0.1 supplied by the vendor.

v1.0.1 2014-8-19
* Do not retry the command and reset the disk when failed to enable or
disable spin up feature.
* Fix up a bug that disk failed to probe if driver failed to access the
10th LBA.
* Fix a bug that request timeout but it has been completed in certain
cases.
* Support smartmontool for R750.

Many thanks to HighPoint for continued support of FreeBSD!

MFC r284792:

Merge changes from vendor driver 1.1.4:

v1.1.4 2015-06-09
* Fix a bug that FailLED was not initialized properly.
v1.1.3 2015-05-19
* Support Report Luns command.
v1.1.2 2015-05-05
* Fix a bug that report wrong physical sector size for 512e HDD.

Many thanks to HighPoint for continued support of FreeBSD!

This driver update is intended for 10.2-RELEASE.

Submitted by: Steve Chang

MFC r281387:

Merge changes from vendor driver version 1.1.1:

v1.1.1 2015-03-26
* Support 4Kn drive.
* Change the SCSI target ID of the disk to be the index of physical
connetion to the HBA.
* Support staggered drive spin up.
* Fix a bug that command would be timeout because of improper
interrupt service routine.
* Error handling to avoid scsi command lost which caused system
hang up.
* Fix a bug that fail to get the devcie's serial number via
FreeNAS WebGUI.

Many thanks to HighPoint for continued support of FreeBSD!

Relnotes: yes

MFC r269613:
Various fixes to hptnr(4)

Sponsored by: Multiplay

MFC r270384:

Update hptnr(4) driver to version 1.0.1 supplied by the vendor.

v1.0.1 2014-8-19
* Do not retry the command and reset the disk when failed to enable or
disable spin up feature.
* Fix up a bug that disk failed to probe if driver failed to access the
10th LBA.
* Fix a bug that request timeout but it has been completed in certain
cases.
* Support smartmontool for R750.

Many thanks to HighPoint for continued support of FreeBSD!