#
283387 |
|
24-May-2015 |
ian |
MFC r279837:
Remove MODULES_OVERRIDE="" and WITHOUT_MODULES="ahc" from armv6 configs.
|
#
278699 |
|
13-Feb-2015 |
ian |
MFC r276003:
Start to clean up the armv6 kernel configs by reducing the diff between them in the first sections and the later FDT support.
|
#
278677 |
|
13-Feb-2015 |
ian |
MFC r276642, r276644:
Remove commented-out options SMP and APIC_IO from old arm boards that will never be able to support smp.
Switch all arm kernels with option SMP to use SCHED_ULE instead of 4BSD.
|
#
266331 |
|
17-May-2014 |
ian |
MFC 263301
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
|
#
266328 |
|
17-May-2014 |
ian |
MFC 263245: Make all the comments '# ' and align to same column.
|
#
266277 |
|
16-May-2014 |
ian |
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924, 262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949, 262950
Strip arm/conf/DEFAULTS down to just items that are mandatory for running the architecture.
Move all the files named foo/common.c to foo/foo_common.c
Initial cut for DTS on the hl201 board.
Add commented out dts for sam9260ek as well as early printf support.
Make clock optional on uart nodes, then back it out ("I don't know what I was thinking, but it is lame.")
Set the baud rate if it isn't 0
Make at91_soc_id() public.
Properly round at91 resource on unmapping.
Move AT91 AIC related stuff to own file.
Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.
Follow r262916 with one more config file that references a renamed common.c
Remove bogus AT91 define that causes compile errors. Most of the defines for SAM9X are going away soonish anyway (once FDT works), but until then...
Remove all dregs of a per-thread undefined-exception-mode stack.
Rework the VFP code that handles demand-based save and restore of state.
Always call vfp_discard() on thread death.
When a thread begins life it doesn't own the VFP hardware state on any cpu.
Make undefined exception entry MP-safe.
|
#
266162 |
|
15-May-2014 |
ian |
MFC r261570, r261572
Revert r260440 (add USB_HOST_ALIGN to all configs, it's only needed for platforms with a 64-byte cacheline size).
Add option USB_HOST_ALIGN=64 for all SoCs that have 64 byte cache lines.
|
#
266086 |
|
14-May-2014 |
ian |
MFC r260440, r260441, r260447, r260490, r260493
Add option USB_HOST_ALIGN to configs that contain 'device usb'.
Update dts files of Cubieboard1,2 to use 1GB memory.
Add a function to print the contents of the static device mapping table,
|
#
266046 |
|
14-May-2014 |
ian |
MFC r257170, r257171, r257172, r257240, r257278, r257279, r257280, r257281, r257282, r257332
Wait for DesignWare UART transfers completion before accessing line control
Enable UART busy detection handling for Armada XP - based board
Enable SATA interface on Armada XP Run mvs SATA driver on Armada XP instead of old mv_sata
Retire arm_remap_nocache() and the data and constants associated with it.
Remove hard-coded mappings related to Armada XP support
Fix-up DTB for Armada XP registers' base according to the actual settings
Change Armada XP kernel load address to the u-boot's end address
Remove not working and deprecated PJ4Bv6 support
Switch off explicit broadcasting of the TLB flush operations for PJ4B CPU
Add missing ARMv6 CPU functions to ARM Makefile
|
#
283387 |
|
24-May-2015 |
ian |
MFC r279837:
Remove MODULES_OVERRIDE="" and WITHOUT_MODULES="ahc" from armv6 configs.
|
#
278699 |
|
13-Feb-2015 |
ian |
MFC r276003:
Start to clean up the armv6 kernel configs by reducing the diff between them in the first sections and the later FDT support.
|
#
278677 |
|
13-Feb-2015 |
ian |
MFC r276642, r276644:
Remove commented-out options SMP and APIC_IO from old arm boards that will never be able to support smp.
Switch all arm kernels with option SMP to use SCHED_ULE instead of 4BSD.
|
#
266331 |
|
17-May-2014 |
ian |
MFC 263301
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
|
#
266328 |
|
17-May-2014 |
ian |
MFC 263245: Make all the comments '# ' and align to same column.
|
#
266277 |
|
16-May-2014 |
ian |
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924, 262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949, 262950
Strip arm/conf/DEFAULTS down to just items that are mandatory for running the architecture.
Move all the files named foo/common.c to foo/foo_common.c
Initial cut for DTS on the hl201 board.
Add commented out dts for sam9260ek as well as early printf support.
Make clock optional on uart nodes, then back it out ("I don't know what I was thinking, but it is lame.")
Set the baud rate if it isn't 0
Make at91_soc_id() public.
Properly round at91 resource on unmapping.
Move AT91 AIC related stuff to own file.
Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.
Follow r262916 with one more config file that references a renamed common.c
Remove bogus AT91 define that causes compile errors. Most of the defines for SAM9X are going away soonish anyway (once FDT works), but until then...
Remove all dregs of a per-thread undefined-exception-mode stack.
Rework the VFP code that handles demand-based save and restore of state.
Always call vfp_discard() on thread death.
When a thread begins life it doesn't own the VFP hardware state on any cpu.
Make undefined exception entry MP-safe.
|
#
266162 |
|
15-May-2014 |
ian |
MFC r261570, r261572
Revert r260440 (add USB_HOST_ALIGN to all configs, it's only needed for platforms with a 64-byte cacheline size).
Add option USB_HOST_ALIGN=64 for all SoCs that have 64 byte cache lines.
|
#
266086 |
|
14-May-2014 |
ian |
MFC r260440, r260441, r260447, r260490, r260493
Add option USB_HOST_ALIGN to configs that contain 'device usb'.
Update dts files of Cubieboard1,2 to use 1GB memory.
Add a function to print the contents of the static device mapping table,
|
#
266046 |
|
14-May-2014 |
ian |
MFC r257170, r257171, r257172, r257240, r257278, r257279, r257280, r257281, r257282, r257332
Wait for DesignWare UART transfers completion before accessing line control
Enable UART busy detection handling for Armada XP - based board
Enable SATA interface on Armada XP Run mvs SATA driver on Armada XP instead of old mv_sata
Retire arm_remap_nocache() and the data and constants associated with it.
Remove hard-coded mappings related to Armada XP support
Fix-up DTB for Armada XP registers' base according to the actual settings
Change Armada XP kernel load address to the u-boot's end address
Remove not working and deprecated PJ4Bv6 support
Switch off explicit broadcasting of the TLB flush operations for PJ4B CPU
Add missing ARMv6 CPU functions to ARM Makefile
|