MFC r280278, r280402:

Allow to override default kernel virtual address assignment on ARM.

Do not save/restore the TLS pointer on context switch for armv6.

MFC r276187, r276190, r271422:

Rename pmap_kenter_temp to pmap_kenter_temporary to be consistent with the
other architectures with this function.

Eliminate unnecessary references to pte.h internals by using the standard
pmap_kenter_temporary() to map pages while dumping.

Cleanup up ARM *frame structures.

MFC r271394, r271398:

Add more register values to armreg.h and remove CPU_CONTROL_32BP_ENABLE
from asm.h as they were already defined in armreg.h.

Unify interrupts bit definition and usage. While here remove PSR_C_bit.

MFC 263910, 263913, 263914, 263933, 263934, 263935, 263936, 263981, 263982,

Add more flags for the fpexc register from the ARM1176JZF-S Manual

Initialise fpscr to a sane value when we create the pcb. This sets NaNs to
be the default NaN and for denormalised numbers to be flushed to zero.

VFP fixes/cleanups for ARM11:
* Save the required VFP registers on context switch. If the exception bit
is set we need to save and restore the FPINST register, and if the fp2v
bit is also set we need to save and restore FPINST2.
* Move saving and restoring the floating point control registers to C.
* Clear the fpexc exception and fp2v flags on a floating-point exception.
* Signal a SIGFPE if the fpexc exception flag is set on an undefined
instruction. This is how the ARM core signals to software there is a
floating-point exception.

Add Cortex-A15 cpu id revisions.

Exynos/Arndale...
- Merge SoC-common parts
- Enable iicbus device
- Directly call kmem_alloc_contig to allocate framebuffer memory
and pass VM_MEMATTR_UNCACHEABLE (no-cache, no-buffer).
This fixes screen refreshing problem when data is updated too slowly.
- Add support for keyboard used in Samsung Chromebook (ARM machine)
Support covers device drivers for:
- Interrupt Combiner
- gpio/pad, External Interrupts Controller (pad)
- I2C Interface
- Chrome Embedded Controller
- Chrome Keyboard
- Use new gpio dev class in EHCI driver
- Expand device tree information
- Release i2c bus on detach.

MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950

Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.

Move all the files named foo/common.c to foo/foo_common.c

Initial cut for DTS on the hl201 board.

Add commented out dts for sam9260ek as well as early printf support.

Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")

Set the baud rate if it isn't 0

Make at91_soc_id() public.

Properly round at91 resource on unmapping.

Move AT91 AIC related stuff to own file.

Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.

Follow r262916 with one more config file that references a renamed common.c

Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...

Remove all dregs of a per-thread undefined-exception-mode stack.

Rework the VFP code that handles demand-based save and restore of state.

Always call vfp_discard() on thread death.

When a thread begins life it doesn't own the VFP hardware state on any cpu.

Make undefined exception entry MP-safe.

MFC r257549, r261642

Don't create a distinct free page pool for segregating allocations that are
accessed through the direct map unless the kernel configuration actually
includes a direct map. Only a few configurations do, and for the rest the
unnecessary free page pool is a small pessimization.

Remove the ARM_USE_SMALL_ALLOC option and code related to it.

MFC r261423, r261424, r261516, r261513, r261562, r261563, r261564, r261565,
r261596, r261606

Add the imx sdhci controller.

Move Open Firmware device root on PowerPC, ARM, and MIPS systems to
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.

Add the missing ')' at end of sentence. Reword it to use a more common idiom.

Pass the kernel physical address to initarm through the boot param struct.

Make functions only used in vfp.c static, and remove vfp_enable.

Fix __syscall on armeb EABI. As it returns a 64-bit value it needs to
place 32-bit data in r1, not r0. 64-bit data is already packed correctly.

Use abp_physaddr for the physical address over KERNPHYSADDR. This helps us
remove the need to load the kernel at a fixed address.

Remove references to PHYSADDR where it's used only in debugging output.

Dynamically generate the page table. This will allow us to detect the
physical address we are loaded at to change the mapping.

MFC r257201, r257202

Retire arm_remap_nocache() and the data and constants associated with it.

MFC r257199, r257200, r257217:

Remove all #include <machine/pmap.h> from arm code. It's already
included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h
so there's no reason to ever include it directly.

Remove #include <machine/frame.h> from all the arm code that doesn't
really need it. That would be almost everywhere it was included. Add
it in a couple files that really do need it and were previously getting
it by accident via another header.

Remove the last dregs of trapframe_t. It turns out only arm was using
this type, so remove it to make arm code more consistant with other
platforms.

MFC r280278, r280402:

Allow to override default kernel virtual address assignment on ARM.

Do not save/restore the TLS pointer on context switch for armv6.

MFC r276187, r276190, r271422:

Rename pmap_kenter_temp to pmap_kenter_temporary to be consistent with the
other architectures with this function.

Eliminate unnecessary references to pte.h internals by using the standard
pmap_kenter_temporary() to map pages while dumping.

Cleanup up ARM *frame structures.

MFC r271394, r271398:

Add more register values to armreg.h and remove CPU_CONTROL_32BP_ENABLE
from asm.h as they were already defined in armreg.h.

Unify interrupts bit definition and usage. While here remove PSR_C_bit.

MFC 263910, 263913, 263914, 263933, 263934, 263935, 263936, 263981, 263982,

Add more flags for the fpexc register from the ARM1176JZF-S Manual

Initialise fpscr to a sane value when we create the pcb. This sets NaNs to
be the default NaN and for denormalised numbers to be flushed to zero.

VFP fixes/cleanups for ARM11:
* Save the required VFP registers on context switch. If the exception bit
is set we need to save and restore the FPINST register, and if the fp2v
bit is also set we need to save and restore FPINST2.
* Move saving and restoring the floating point control registers to C.
* Clear the fpexc exception and fp2v flags on a floating-point exception.
* Signal a SIGFPE if the fpexc exception flag is set on an undefined
instruction. This is how the ARM core signals to software there is a
floating-point exception.

Add Cortex-A15 cpu id revisions.

Exynos/Arndale...
- Merge SoC-common parts
- Enable iicbus device
- Directly call kmem_alloc_contig to allocate framebuffer memory
and pass VM_MEMATTR_UNCACHEABLE (no-cache, no-buffer).
This fixes screen refreshing problem when data is updated too slowly.
- Add support for keyboard used in Samsung Chromebook (ARM machine)
Support covers device drivers for:
- Interrupt Combiner
- gpio/pad, External Interrupts Controller (pad)
- I2C Interface
- Chrome Embedded Controller
- Chrome Keyboard
- Use new gpio dev class in EHCI driver
- Expand device tree information
- Release i2c bus on detach.

MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950

Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.

Move all the files named foo/common.c to foo/foo_common.c

Initial cut for DTS on the hl201 board.

Add commented out dts for sam9260ek as well as early printf support.

Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")

Set the baud rate if it isn't 0

Make at91_soc_id() public.

Properly round at91 resource on unmapping.

Move AT91 AIC related stuff to own file.

Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.

Follow r262916 with one more config file that references a renamed common.c

Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...

Remove all dregs of a per-thread undefined-exception-mode stack.

Rework the VFP code that handles demand-based save and restore of state.

Always call vfp_discard() on thread death.

When a thread begins life it doesn't own the VFP hardware state on any cpu.

Make undefined exception entry MP-safe.

MFC r257549, r261642

Don't create a distinct free page pool for segregating allocations that are
accessed through the direct map unless the kernel configuration actually
includes a direct map. Only a few configurations do, and for the rest the
unnecessary free page pool is a small pessimization.

Remove the ARM_USE_SMALL_ALLOC option and code related to it.

MFC r261423, r261424, r261516, r261513, r261562, r261563, r261564, r261565,
r261596, r261606

Add the imx sdhci controller.

Move Open Firmware device root on PowerPC, ARM, and MIPS systems to
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.

Add the missing ')' at end of sentence. Reword it to use a more common idiom.

Pass the kernel physical address to initarm through the boot param struct.

Make functions only used in vfp.c static, and remove vfp_enable.

Fix __syscall on armeb EABI. As it returns a 64-bit value it needs to
place 32-bit data in r1, not r0. 64-bit data is already packed correctly.

Use abp_physaddr for the physical address over KERNPHYSADDR. This helps us
remove the need to load the kernel at a fixed address.

Remove references to PHYSADDR where it's used only in debugging output.

Dynamically generate the page table. This will allow us to detect the
physical address we are loaded at to change the mapping.

MFC r257201, r257202

Retire arm_remap_nocache() and the data and constants associated with it.

MFC r257199, r257200, r257217:

Remove all #include <machine/pmap.h> from arm code. It's already
included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h
so there's no reason to ever include it directly.

Remove #include <machine/frame.h> from all the arm code that doesn't
really need it. That would be almost everywhere it was included. Add
it in a couple files that really do need it and were previously getting
it by accident via another header.

Remove the last dregs of trapframe_t. It turns out only arm was using
this type, so remove it to make arm code more consistant with other
platforms.