11d10
< #include <dt-bindings/clk/ti-dra7-atl.h>
21a21,22
> rtc2 = &rtc;
> display0 = &hdmi0;
36a38,45
> aic_dvdd: fixedregulator-aic_dvdd {
> compatible = "regulator-fixed";
> regulator-name = "aic_dvdd_fixed";
> vin-supply = <&vdd_3v3>;
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
>
87c96
< gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
---
> gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
89a99
> #cooling-cells = <2>;
99,101c109,124
< extcon_usb2: extcon_usb2 {
< compatible = "linux,extcon-usb-gpio";
< id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
---
> hdmi0: connector {
> compatible = "hdmi-connector";
> label = "hdmi";
>
> type = "a";
>
> port {
> hdmi_connector_in: endpoint {
> remote-endpoint = <&tpd12s015_out>;
> };
> };
> };
>
> tpd12s015: encoder {
> compatible = "ti,tpd12s015";
>
103c126,151
< pinctrl-0 = <&extcon_usb2_pins>;
---
> pinctrl-0 = <&tpd12s015_pins>;
>
> gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
> <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
> <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
>
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> port@0 {
> reg = <0>;
>
> tpd12s015_in: endpoint {
> remote-endpoint = <&hdmi_out>;
> };
> };
>
> port@1 {
> reg = <1>;
>
> tpd12s015_out: endpoint {
> remote-endpoint = <&hdmi_connector_in>;
> };
> };
> };
104a153,178
>
> sound0: sound@0 {
> compatible = "simple-audio-card";
> simple-audio-card,name = "BeagleBoard-X15";
> simple-audio-card,widgets =
> "Line", "Line Out",
> "Line", "Line In";
> simple-audio-card,routing =
> "Line Out", "LLOUT",
> "Line Out", "RLOUT",
> "MIC2L", "Line In",
> "MIC2R", "Line In";
> simple-audio-card,format = "dsp_b";
> simple-audio-card,bitclock-master = <&sound0_master>;
> simple-audio-card,frame-master = <&sound0_master>;
> simple-audio-card,bitclock-inversion;
>
> simple-audio-card,cpu {
> sound-dai = <&mcasp3>;
> };
>
> sound0_master: simple-audio-card,codec {
> sound-dai = <&tlv320aic3104>;
> clocks = <&clkout2_clk>;
> };
> };
110,113c184,187
< 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
< 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
< 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
< 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
---
> DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
> DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
> DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
> DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
119,120c193,194
< 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
< 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
---
> DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
> DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
123a198,204
> hdmi_pins: pinmux_hdmi_pins {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
> DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
> >;
> };
>
126,127c207,208
< 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
< 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
---
> DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
> DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
133,134c214,215
< 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
< 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
---
> DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
> DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
140,146c221,227
< 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
< 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
< 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
< 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
< 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
< 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
< 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
---
> DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
> DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
> DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
> DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
> DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
> DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
> DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
152,161c233,242
< 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
< 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
< 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
< 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
< 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
< 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
< 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
< 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
< 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
< 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
---
> DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
> DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
> DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
> DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
> DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
> DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
> DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
> DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
> DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
> DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
168,179c249,260
< 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
< 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
< 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
< 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
< 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
< 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
< 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
< 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
< 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
< 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
< 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
< 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
---
> DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
> DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
> DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
> DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
> DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
> DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
> DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
> DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
> DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
> DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
> DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
> DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
182,193c263,274
< 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
< 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
< 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
< 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
< 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
< 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
< 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
< 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
< 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
< 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
< 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
< 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
---
> DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
> DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
> DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
> DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
> DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
> DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
> DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
> DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
> DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
> DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
> DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
> DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
201,212c282,293
< 0x250 (PIN_INPUT | MUX_MODE15)
< 0x254 (PIN_INPUT | MUX_MODE15)
< 0x258 (PIN_INPUT | MUX_MODE15)
< 0x25c (PIN_INPUT | MUX_MODE15)
< 0x260 (PIN_INPUT | MUX_MODE15)
< 0x264 (PIN_INPUT | MUX_MODE15)
< 0x268 (PIN_INPUT | MUX_MODE15)
< 0x26c (PIN_INPUT | MUX_MODE15)
< 0x270 (PIN_INPUT | MUX_MODE15)
< 0x274 (PIN_INPUT | MUX_MODE15)
< 0x278 (PIN_INPUT | MUX_MODE15)
< 0x27c (PIN_INPUT | MUX_MODE15)
---
> DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
215,226c296,307
< 0x198 (PIN_INPUT | MUX_MODE15)
< 0x19c (PIN_INPUT | MUX_MODE15)
< 0x1a0 (PIN_INPUT | MUX_MODE15)
< 0x1a4 (PIN_INPUT | MUX_MODE15)
< 0x1a8 (PIN_INPUT | MUX_MODE15)
< 0x1ac (PIN_INPUT | MUX_MODE15)
< 0x1b0 (PIN_INPUT | MUX_MODE15)
< 0x1b4 (PIN_INPUT | MUX_MODE15)
< 0x1b8 (PIN_INPUT | MUX_MODE15)
< 0x1bc (PIN_INPUT | MUX_MODE15)
< 0x1c0 (PIN_INPUT | MUX_MODE15)
< 0x1c4 (PIN_INPUT | MUX_MODE15)
---
> DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
233,234c314,315
< 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
< 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
---
> DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
> DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
240,241c321,322
< 0x23c (PIN_INPUT | MUX_MODE15)
< 0x240 (PIN_INPUT | MUX_MODE15)
---
> DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
247c328
< 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
---
> DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
253c334
< 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
---
> DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
259c340
< 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
---
> DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
265c346
< 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
---
> DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
271c352
< 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
---
> DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
275c356
< extcon_usb2_pins: extcon_usb2_pins {
---
> tpd12s015_pins: pinmux_tpd12s015_pins {
277c358,360
< 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
---
> DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
> DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
> DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
279a363,392
>
> clkout2_pins_default: clkout2_pins_default {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
> >;
> };
>
> clkout2_pins_sleep: clkout2_pins_sleep {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
> >;
> };
>
> mcasp3_pins_default: mcasp3_pins_default {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
> DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
> DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
> DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
> >;
> };
>
> mcasp3_pins_sleep: mcasp3_pins_sleep {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
> >;
> };
356c469
< /* VDD_SD */
---
> /* VDD_SD / VDDSHV8 */
360a474
> regulator-always-on;
373c487
< /* VDDA_1V8_PHY */
---
> /* VDDA_1V8_PHYA */
380a495,503
> ldo4_reg: ldo4 {
> /* VDDA_1V8_PHYB */
> regulator-name = "ldo4";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> regulator-always-on;
> regulator-boot-on;
> };
>
435a559,566
>
> extcon_usb2: tps659038_usb {
> compatible = "ti,palmas-usb-vid";
> ti,enable-vbus-detection;
> ti,enable-id-detection;
> id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
> };
>
444a576
> #thermal-sensor-cells = <1>;
445a578,593
>
> tlv320aic3104: tlv320aic3104@18 {
> #sound-dai-cells = <0>;
> compatible = "ti,tlv320aic3104";
> reg = <0x18>;
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&clkout2_pins_default>;
> pinctrl-1 = <&clkout2_pins_sleep>;
> status = "okay";
> adc-settle-ms = <40>;
>
> AVDD-supply = <&vdd_3v3>;
> IOVDD-supply = <&vdd_3v3>;
> DRVDD-supply = <&vdd_3v3>;
> DVDD-supply = <&aic_dvdd>;
> };
457,458c605,607
< interrupt-parent = <&gic>;
< interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
---
> interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
> <&dra7_pmx_core 0x424>;
> interrupt-names = "irq", "wakeup";
480,481c629,630
< interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
< <&dra7_pmx_core 0x248>;
---
> interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> <&dra7_pmx_core 0x3f8>;
520,521d668
< vmmc_aux-supply = <&vdd_3v3>;
< pbias-supply = <&pbias_mmc_reg>;
523c670
< cd-gpios = <&gpio6 27 0>; /* gpio 219 */
---
> cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
545a693,696
> &usb2_phy2 {
> phy-supply = <&ldousb_reg>;
> };
>
560a712,719
> /*
> * Stand alone usage is peripheral only.
> * However, with some resistor modifications
> * this port can be used via expansion connectors
> * as "host" or "dual-role". If so, provide
> * the necessary dr_mode override in the expansion
> * board's DT.
> */
562a722,827
>
> &cpu_trips {
> cpu_alert1: cpu_alert1 {
> temperature = <50000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "active";
> };
> };
>
> &cpu_cooling_maps {
> map1 {
> trip = <&cpu_alert1>;
> cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
>
> &thermal_zones {
> board_thermal: board_thermal {
> polling-delay-passive = <1250>; /* milliseconds */
> polling-delay = <1500>; /* milliseconds */
>
> /* sensor ID */
> thermal-sensors = <&tmp102 0>;
>
> board_trips: trips {
> board_alert0: board_alert {
> temperature = <40000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "active";
> };
>
> board_crit: board_crit {
> temperature = <105000>; /* millicelsius */
> hysteresis = <0>; /* millicelsius */
> type = "critical";
> };
> };
>
> board_cooling_maps: cooling-maps {
> map0 {
> trip = <&board_alert0>;
> cooling-device =
> <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
> };
> };
>
> &dss {
> status = "ok";
>
> vdda_video-supply = <&ldoln_reg>;
> };
>
> &hdmi {
> status = "ok";
> vdda-supply = <&ldo4_reg>;
>
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
>
> port {
> hdmi_out: endpoint {
> remote-endpoint = <&tpd12s015_in>;
> };
> };
> };
>
> &pcie1 {
> gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
> };
>
> &mcasp3 {
> #sound-dai-cells = <0>;
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&mcasp3_pins_default>;
> pinctrl-1 = <&mcasp3_pins_sleep>;
> status = "okay";
>
> op-mode = <0>; /* MCASP_IIS_MODE */
> tdm-slots = <2>;
> /* 4 serializers */
> serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> 1 2 0 0
> >;
> };
>
> &mailbox5 {
> status = "okay";
> mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
> status = "okay";
> };
> mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
> status = "okay";
> };
> };
>
> &mailbox6 {
> status = "okay";
> mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
> status = "okay";
> };
> mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
> status = "okay";
> };
> };
< #include <dt-bindings/clk/ti-dra7-atl.h>
21a21,22
> rtc2 = &rtc;
> display0 = &hdmi0;
36a38,45
> aic_dvdd: fixedregulator-aic_dvdd {
> compatible = "regulator-fixed";
> regulator-name = "aic_dvdd_fixed";
> vin-supply = <&vdd_3v3>;
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
>
87c96
< gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
---
> gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
89a99
> #cooling-cells = <2>;
99,101c109,124
< extcon_usb2: extcon_usb2 {
< compatible = "linux,extcon-usb-gpio";
< id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
---
> hdmi0: connector {
> compatible = "hdmi-connector";
> label = "hdmi";
>
> type = "a";
>
> port {
> hdmi_connector_in: endpoint {
> remote-endpoint = <&tpd12s015_out>;
> };
> };
> };
>
> tpd12s015: encoder {
> compatible = "ti,tpd12s015";
>
103c126,151
< pinctrl-0 = <&extcon_usb2_pins>;
---
> pinctrl-0 = <&tpd12s015_pins>;
>
> gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
> <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
> <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
>
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
>
> port@0 {
> reg = <0>;
>
> tpd12s015_in: endpoint {
> remote-endpoint = <&hdmi_out>;
> };
> };
>
> port@1 {
> reg = <1>;
>
> tpd12s015_out: endpoint {
> remote-endpoint = <&hdmi_connector_in>;
> };
> };
> };
104a153,178
>
> sound0: sound@0 {
> compatible = "simple-audio-card";
> simple-audio-card,name = "BeagleBoard-X15";
> simple-audio-card,widgets =
> "Line", "Line Out",
> "Line", "Line In";
> simple-audio-card,routing =
> "Line Out", "LLOUT",
> "Line Out", "RLOUT",
> "MIC2L", "Line In",
> "MIC2R", "Line In";
> simple-audio-card,format = "dsp_b";
> simple-audio-card,bitclock-master = <&sound0_master>;
> simple-audio-card,frame-master = <&sound0_master>;
> simple-audio-card,bitclock-inversion;
>
> simple-audio-card,cpu {
> sound-dai = <&mcasp3>;
> };
>
> sound0_master: simple-audio-card,codec {
> sound-dai = <&tlv320aic3104>;
> clocks = <&clkout2_clk>;
> };
> };
110,113c184,187
< 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
< 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
< 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
< 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
---
> DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
> DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
> DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
> DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
119,120c193,194
< 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
< 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
---
> DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
> DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
123a198,204
> hdmi_pins: pinmux_hdmi_pins {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
> DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
> >;
> };
>
126,127c207,208
< 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
< 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
---
> DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
> DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
133,134c214,215
< 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
< 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
---
> DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
> DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
140,146c221,227
< 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
< 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
< 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
< 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
< 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
< 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
< 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
---
> DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
> DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
> DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
> DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
> DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
> DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
> DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
152,161c233,242
< 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
< 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
< 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
< 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
< 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
< 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
< 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
< 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
< 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
< 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
---
> DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
> DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
> DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
> DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
> DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
> DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
> DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
> DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
> DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
> DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
168,179c249,260
< 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
< 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
< 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
< 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
< 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
< 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
< 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
< 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
< 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
< 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
< 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
< 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
---
> DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
> DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
> DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
> DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
> DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
> DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
> DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
> DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
> DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
> DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
> DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
> DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
182,193c263,274
< 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
< 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
< 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
< 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
< 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
< 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
< 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
< 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
< 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
< 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
< 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
< 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
---
> DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
> DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
> DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
> DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
> DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
> DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
> DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
> DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
> DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
> DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
> DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
> DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
201,212c282,293
< 0x250 (PIN_INPUT | MUX_MODE15)
< 0x254 (PIN_INPUT | MUX_MODE15)
< 0x258 (PIN_INPUT | MUX_MODE15)
< 0x25c (PIN_INPUT | MUX_MODE15)
< 0x260 (PIN_INPUT | MUX_MODE15)
< 0x264 (PIN_INPUT | MUX_MODE15)
< 0x268 (PIN_INPUT | MUX_MODE15)
< 0x26c (PIN_INPUT | MUX_MODE15)
< 0x270 (PIN_INPUT | MUX_MODE15)
< 0x274 (PIN_INPUT | MUX_MODE15)
< 0x278 (PIN_INPUT | MUX_MODE15)
< 0x27c (PIN_INPUT | MUX_MODE15)
---
> DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
215,226c296,307
< 0x198 (PIN_INPUT | MUX_MODE15)
< 0x19c (PIN_INPUT | MUX_MODE15)
< 0x1a0 (PIN_INPUT | MUX_MODE15)
< 0x1a4 (PIN_INPUT | MUX_MODE15)
< 0x1a8 (PIN_INPUT | MUX_MODE15)
< 0x1ac (PIN_INPUT | MUX_MODE15)
< 0x1b0 (PIN_INPUT | MUX_MODE15)
< 0x1b4 (PIN_INPUT | MUX_MODE15)
< 0x1b8 (PIN_INPUT | MUX_MODE15)
< 0x1bc (PIN_INPUT | MUX_MODE15)
< 0x1c0 (PIN_INPUT | MUX_MODE15)
< 0x1c4 (PIN_INPUT | MUX_MODE15)
---
> DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
233,234c314,315
< 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
< 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
---
> DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
> DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
240,241c321,322
< 0x23c (PIN_INPUT | MUX_MODE15)
< 0x240 (PIN_INPUT | MUX_MODE15)
---
> DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
247c328
< 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
---
> DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
253c334
< 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
---
> DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
259c340
< 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
---
> DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
265c346
< 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
---
> DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
271c352
< 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
---
> DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
275c356
< extcon_usb2_pins: extcon_usb2_pins {
---
> tpd12s015_pins: pinmux_tpd12s015_pins {
277c358,360
< 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
---
> DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
> DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
> DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
279a363,392
>
> clkout2_pins_default: clkout2_pins_default {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
> >;
> };
>
> clkout2_pins_sleep: clkout2_pins_sleep {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
> >;
> };
>
> mcasp3_pins_default: mcasp3_pins_default {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
> DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
> DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
> DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
> >;
> };
>
> mcasp3_pins_sleep: mcasp3_pins_sleep {
> pinctrl-single,pins = <
> DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
> DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
> >;
> };
356c469
< /* VDD_SD */
---
> /* VDD_SD / VDDSHV8 */
360a474
> regulator-always-on;
373c487
< /* VDDA_1V8_PHY */
---
> /* VDDA_1V8_PHYA */
380a495,503
> ldo4_reg: ldo4 {
> /* VDDA_1V8_PHYB */
> regulator-name = "ldo4";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> regulator-always-on;
> regulator-boot-on;
> };
>
435a559,566
>
> extcon_usb2: tps659038_usb {
> compatible = "ti,palmas-usb-vid";
> ti,enable-vbus-detection;
> ti,enable-id-detection;
> id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
> };
>
444a576
> #thermal-sensor-cells = <1>;
445a578,593
>
> tlv320aic3104: tlv320aic3104@18 {
> #sound-dai-cells = <0>;
> compatible = "ti,tlv320aic3104";
> reg = <0x18>;
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&clkout2_pins_default>;
> pinctrl-1 = <&clkout2_pins_sleep>;
> status = "okay";
> adc-settle-ms = <40>;
>
> AVDD-supply = <&vdd_3v3>;
> IOVDD-supply = <&vdd_3v3>;
> DRVDD-supply = <&vdd_3v3>;
> DVDD-supply = <&aic_dvdd>;
> };
457,458c605,607
< interrupt-parent = <&gic>;
< interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
---
> interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
> <&dra7_pmx_core 0x424>;
> interrupt-names = "irq", "wakeup";
480,481c629,630
< interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
< <&dra7_pmx_core 0x248>;
---
> interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
> <&dra7_pmx_core 0x3f8>;
520,521d668
< vmmc_aux-supply = <&vdd_3v3>;
< pbias-supply = <&pbias_mmc_reg>;
523c670
< cd-gpios = <&gpio6 27 0>; /* gpio 219 */
---
> cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
545a693,696
> &usb2_phy2 {
> phy-supply = <&ldousb_reg>;
> };
>
560a712,719
> /*
> * Stand alone usage is peripheral only.
> * However, with some resistor modifications
> * this port can be used via expansion connectors
> * as "host" or "dual-role". If so, provide
> * the necessary dr_mode override in the expansion
> * board's DT.
> */
562a722,827
>
> &cpu_trips {
> cpu_alert1: cpu_alert1 {
> temperature = <50000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "active";
> };
> };
>
> &cpu_cooling_maps {
> map1 {
> trip = <&cpu_alert1>;
> cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
>
> &thermal_zones {
> board_thermal: board_thermal {
> polling-delay-passive = <1250>; /* milliseconds */
> polling-delay = <1500>; /* milliseconds */
>
> /* sensor ID */
> thermal-sensors = <&tmp102 0>;
>
> board_trips: trips {
> board_alert0: board_alert {
> temperature = <40000>; /* millicelsius */
> hysteresis = <2000>; /* millicelsius */
> type = "active";
> };
>
> board_crit: board_crit {
> temperature = <105000>; /* millicelsius */
> hysteresis = <0>; /* millicelsius */
> type = "critical";
> };
> };
>
> board_cooling_maps: cooling-maps {
> map0 {
> trip = <&board_alert0>;
> cooling-device =
> <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
> };
> };
> };
>
> &dss {
> status = "ok";
>
> vdda_video-supply = <&ldoln_reg>;
> };
>
> &hdmi {
> status = "ok";
> vdda-supply = <&ldo4_reg>;
>
> pinctrl-names = "default";
> pinctrl-0 = <&hdmi_pins>;
>
> port {
> hdmi_out: endpoint {
> remote-endpoint = <&tpd12s015_in>;
> };
> };
> };
>
> &pcie1 {
> gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
> };
>
> &mcasp3 {
> #sound-dai-cells = <0>;
> pinctrl-names = "default", "sleep";
> pinctrl-0 = <&mcasp3_pins_default>;
> pinctrl-1 = <&mcasp3_pins_sleep>;
> status = "okay";
>
> op-mode = <0>; /* MCASP_IIS_MODE */
> tdm-slots = <2>;
> /* 4 serializers */
> serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> 1 2 0 0
> >;
> };
>
> &mailbox5 {
> status = "okay";
> mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
> status = "okay";
> };
> mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
> status = "okay";
> };
> };
>
> &mailbox6 {
> status = "okay";
> mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
> status = "okay";
> };
> mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
> status = "okay";
> };
> };