1/*
2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra74x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13
14/ {
15 model = "TI AM5728 BeagleBoard-X15";
16 compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
17
18 aliases {
19 rtc0 = &mcp_rtc;
20 rtc1 = &tps659038_rtc;
21 rtc2 = &rtc;
22 display0 = &hdmi0;
23 };
24
25 memory {
26 device_type = "memory";
27 reg = <0x80000000 0x80000000>;
28 };
29
30 vdd_3v3: fixedregulator-vdd_3v3 {
31 compatible = "regulator-fixed";
32 regulator-name = "vdd_3v3";
33 vin-supply = <®en1>;
34 regulator-min-microvolt = <3300000>;
35 regulator-max-microvolt = <3300000>;
36 };
37
38 aic_dvdd: fixedregulator-aic_dvdd {
39 compatible = "regulator-fixed";
40 regulator-name = "aic_dvdd_fixed";
41 vin-supply = <&vdd_3v3>;
42 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <1800000>;
44 };
45
46 vtt_fixed: fixedregulator-vtt {
47 /* TPS51200 */
48 compatible = "regulator-fixed";
49 regulator-name = "vtt_fixed";
50 vin-supply = <&smps3_reg>;
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
53 regulator-always-on;
--- 34 unchanged lines hidden (view full) ---
88 linux,default-trigger = "ide-disk";
89 default-state = "off";
90 };
91 };
92
93 gpio_fan: gpio_fan {
94 /* Based on 5v 500mA AFB02505HHB */
95 compatible = "gpio-fan";
96 gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
97 gpio-fan,speed-map = <0 0>,
98 <13000 1>;
99 #cooling-cells = <2>;
100 };
101
102 extcon_usb1: extcon_usb1 {
103 compatible = "linux,extcon-usb-gpio";
104 id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
105 pinctrl-names = "default";
106 pinctrl-0 = <&extcon_usb1_pins>;
107 };
108
109 hdmi0: connector {
110 compatible = "hdmi-connector";
111 label = "hdmi";
112
113 type = "a";
114
115 port {
116 hdmi_connector_in: endpoint {
117 remote-endpoint = <&tpd12s015_out>;
118 };
119 };
120 };
121
122 tpd12s015: encoder {
123 compatible = "ti,tpd12s015";
124
125 pinctrl-names = "default";
126 pinctrl-0 = <&tpd12s015_pins>;
127
128 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
129 <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
130 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
131
132 ports {
133 #address-cells = <1>;
134 #size-cells = <0>;
135
136 port@0 {
137 reg = <0>;
138
139 tpd12s015_in: endpoint {
140 remote-endpoint = <&hdmi_out>;
141 };
142 };
143
144 port@1 {
145 reg = <1>;
146
147 tpd12s015_out: endpoint {
148 remote-endpoint = <&hdmi_connector_in>;
149 };
150 };
151 };
152 };
153
154 sound0: sound@0 {
155 compatible = "simple-audio-card";
156 simple-audio-card,name = "BeagleBoard-X15";
157 simple-audio-card,widgets =
158 "Line", "Line Out",
159 "Line", "Line In";
160 simple-audio-card,routing =
161 "Line Out", "LLOUT",
162 "Line Out", "RLOUT",
163 "MIC2L", "Line In",
164 "MIC2R", "Line In";
165 simple-audio-card,format = "dsp_b";
166 simple-audio-card,bitclock-master = <&sound0_master>;
167 simple-audio-card,frame-master = <&sound0_master>;
168 simple-audio-card,bitclock-inversion;
169
170 simple-audio-card,cpu {
171 sound-dai = <&mcasp3>;
172 };
173
174 sound0_master: simple-audio-card,codec {
175 sound-dai = <&tlv320aic3104>;
176 clocks = <&clkout2_clk>;
177 };
178 };
179};
180
181&dra7_pmx_core {
182 leds_pins_default: leds_pins_default {
183 pinctrl-single,pins = <
184 DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
185 DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
186 DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
187 DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
188 >;
189 };
190
191 i2c1_pins_default: i2c1_pins_default {
192 pinctrl-single,pins = <
193 DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
194 DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
195 >;
196 };
197
198 hdmi_pins: pinmux_hdmi_pins {
199 pinctrl-single,pins = <
200 DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
201 DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
202 >;
203 };
204
205 i2c3_pins_default: i2c3_pins_default {
206 pinctrl-single,pins = <
207 DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
208 DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
209 >;
210 };
211
212 uart3_pins_default: uart3_pins_default {
213 pinctrl-single,pins = <
214 DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
215 DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
216 >;
217 };
218
219 mmc1_pins_default: mmc1_pins_default {
220 pinctrl-single,pins = <
221 DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
222 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
223 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
224 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
225 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
226 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
227 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
228 >;
229 };
230
231 mmc2_pins_default: mmc2_pins_default {
232 pinctrl-single,pins = <
233 DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
234 DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
235 DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
236 DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
237 DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
238 DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
239 DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
240 DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
241 DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
242 DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
243 >;
244 };
245
246 cpsw_pins_default: cpsw_pins_default {
247 pinctrl-single,pins = <
248 /* Slave 1 */
249 DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
250 DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
251 DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
252 DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
253 DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
254 DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
255 DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
256 DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
257 DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
258 DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
259 DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
260 DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
261
262 /* Slave 2 */
263 DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
264 DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
265 DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
266 DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
267 DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
268 DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
269 DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
270 DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
271 DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
272 DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
273 DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
274 DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
275 >;
276
277 };
278
279 cpsw_pins_sleep: cpsw_pins_sleep {
280 pinctrl-single,pins = <
281 /* Slave 1 */
282 DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
283 DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
284 DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
285 DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
286 DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
287 DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
288 DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
289 DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
290 DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
291 DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
292 DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
293 DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
294
295 /* Slave 2 */
296 DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
297 DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
298 DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
299 DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
300 DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
301 DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
302 DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
303 DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
304 DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
305 DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
306 DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
307 DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
308 >;
309 };
310
311 davinci_mdio_pins_default: davinci_mdio_pins_default {
312 pinctrl-single,pins = <
313 /* MDIO */
314 DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
315 DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
316 >;
317 };
318
319 davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
320 pinctrl-single,pins = <
321 DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
322 DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
323 >;
324 };
325
326 tps659038_pins_default: tps659038_pins_default {
327 pinctrl-single,pins = <
328 DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
329 >;
330 };
331
332 tmp102_pins_default: tmp102_pins_default {
333 pinctrl-single,pins = <
334 DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
335 >;
336 };
337
338 mcp79410_pins_default: mcp79410_pins_default {
339 pinctrl-single,pins = <
340 DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
341 >;
342 };
343
344 usb1_pins: pinmux_usb1_pins {
345 pinctrl-single,pins = <
346 DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
347 >;
348 };
349
350 extcon_usb1_pins: extcon_usb1_pins {
351 pinctrl-single,pins = <
352 DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
353 >;
354 };
355
356 tpd12s015_pins: pinmux_tpd12s015_pins {
357 pinctrl-single,pins = <
358 DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
359 DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
360 DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
361 >;
362 };
363
364 clkout2_pins_default: clkout2_pins_default {
365 pinctrl-single,pins = <
366 DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
367 >;
368 };
369
370 clkout2_pins_sleep: clkout2_pins_sleep {
371 pinctrl-single,pins = <
372 DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
373 >;
374 };
375
376 mcasp3_pins_default: mcasp3_pins_default {
377 pinctrl-single,pins = <
378 DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
379 DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
380 DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
381 DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
382 >;
383 };
384
385 mcasp3_pins_sleep: mcasp3_pins_sleep {
386 pinctrl-single,pins = <
387 DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
388 DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
389 DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
390 DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
391 >;
392 };
393};
394
395&i2c1 {
396 status = "okay";
397 pinctrl-names = "default";
398 pinctrl-0 = <&i2c1_pins_default>;
399 clock-frequency = <400000>;
400
--- 60 unchanged lines hidden (view full) ---
461 regulator-max-microvolt = <1800000>;
462 regulator-always-on;
463 regulator-boot-on;
464 };
465
466 /* SMPS9 unused */
467
468 ldo1_reg: ldo1 {
469 /* VDD_SD / VDDSHV8 */
470 regulator-name = "ldo1";
471 regulator-min-microvolt = <1800000>;
472 regulator-max-microvolt = <3300000>;
473 regulator-boot-on;
474 regulator-always-on;
475 };
476
477 ldo2_reg: ldo2 {
478 /* VDD_SHV5 */
479 regulator-name = "ldo2";
480 regulator-min-microvolt = <3300000>;
481 regulator-max-microvolt = <3300000>;
482 regulator-always-on;
483 regulator-boot-on;
484 };
485
486 ldo3_reg: ldo3 {
487 /* VDDA_1V8_PHYA */
488 regulator-name = "ldo3";
489 regulator-min-microvolt = <1800000>;
490 regulator-max-microvolt = <1800000>;
491 regulator-always-on;
492 regulator-boot-on;
493 };
494
495 ldo4_reg: ldo4 {
496 /* VDDA_1V8_PHYB */
497 regulator-name = "ldo4";
498 regulator-min-microvolt = <1800000>;
499 regulator-max-microvolt = <1800000>;
500 regulator-always-on;
501 regulator-boot-on;
502 };
503
504 ldo9_reg: ldo9 {
505 /* VDD_RTC */
506 regulator-name = "ldo9";
507 regulator-min-microvolt = <1050000>;
508 regulator-max-microvolt = <1050000>;
509 regulator-always-on;
510 regulator-boot-on;
511 };
--- 39 unchanged lines hidden (view full) ---
551 ti,palmas-long-press-seconds = <12>;
552 };
553
554 tps659038_gpio: tps659038_gpio {
555 compatible = "ti,palmas-gpio";
556 gpio-controller;
557 #gpio-cells = <2>;
558 };
559
560 extcon_usb2: tps659038_usb {
561 compatible = "ti,palmas-usb-vid";
562 ti,enable-vbus-detection;
563 ti,enable-id-detection;
564 id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
565 };
566
567 };
568
569 tmp102: tmp102@48 {
570 compatible = "ti,tmp102";
571 reg = <0x48>;
572 pinctrl-names = "default";
573 pinctrl-0 = <&tmp102_pins_default>;
574 interrupt-parent = <&gpio7>;
575 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
576 #thermal-sensor-cells = <1>;
577 };
578
579 tlv320aic3104: tlv320aic3104@18 {
580 #sound-dai-cells = <0>;
581 compatible = "ti,tlv320aic3104";
582 reg = <0x18>;
583 pinctrl-names = "default", "sleep";
584 pinctrl-0 = <&clkout2_pins_default>;
585 pinctrl-1 = <&clkout2_pins_sleep>;
586 status = "okay";
587 adc-settle-ms = <40>;
588
589 AVDD-supply = <&vdd_3v3>;
590 IOVDD-supply = <&vdd_3v3>;
591 DRVDD-supply = <&vdd_3v3>;
592 DVDD-supply = <&aic_dvdd>;
593 };
594};
595
596&i2c3 {
597 status = "okay";
598 pinctrl-names = "default";
599 pinctrl-0 = <&i2c3_pins_default>;
600 clock-frequency = <400000>;
601
602 mcp_rtc: rtc@6f {
603 compatible = "microchip,mcp7941x";
604 reg = <0x6f>;
605 interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
606 <&dra7_pmx_core 0x424>;
607 interrupt-names = "irq", "wakeup";
608
609 pinctrl-names = "default";
610 pinctrl-0 = <&mcp79410_pins_default>;
611
612 vcc-supply = <&vdd_3v3>;
613 wakeup-source;
614 };
615};
--- 5 unchanged lines hidden (view full) ---
621
622&cpu0 {
623 cpu0-supply = <&smps12_reg>;
624 voltage-tolerance = <1>;
625};
626
627&uart3 {
628 status = "okay";
629 interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
630 <&dra7_pmx_core 0x3f8>;
631
632 pinctrl-names = "default";
633 pinctrl-0 = <&uart3_pins_default>;
634};
635
636&mac {
637 status = "okay";
638 pinctrl-names = "default", "sleep";
--- 22 unchanged lines hidden (view full) ---
661
662&mmc1 {
663 status = "okay";
664
665 pinctrl-names = "default";
666 pinctrl-0 = <&mmc1_pins_default>;
667
668 vmmc-supply = <&ldo1_reg>;
669 bus-width = <4>;
670 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
671};
672
673&mmc2 {
674 status = "okay";
675
676 pinctrl-names = "default";
677 pinctrl-0 = <&mmc2_pins_default>;
678
--- 6 unchanged lines hidden (view full) ---
685&sata {
686 status = "okay";
687};
688
689&usb2_phy1 {
690 phy-supply = <&ldousb_reg>;
691};
692
693&usb2_phy2 {
694 phy-supply = <&ldousb_reg>;
695};
696
697&usb1 {
698 dr_mode = "host";
699 pinctrl-names = "default";
700 pinctrl-0 = <&usb1_pins>;
701};
702
703&omap_dwc3_1 {
704 extcon = <&extcon_usb1>;
705};
706
707&omap_dwc3_2 {
708 extcon = <&extcon_usb2>;
709};
710
711&usb2 {
712 /*
713 * Stand alone usage is peripheral only.
714 * However, with some resistor modifications
715 * this port can be used via expansion connectors
716 * as "host" or "dual-role". If so, provide
717 * the necessary dr_mode override in the expansion
718 * board's DT.
719 */
720 dr_mode = "peripheral";
721};
722
723&cpu_trips {
724 cpu_alert1: cpu_alert1 {
725 temperature = <50000>; /* millicelsius */
726 hysteresis = <2000>; /* millicelsius */
727 type = "active";
728 };
729};
730
731&cpu_cooling_maps {
732 map1 {
733 trip = <&cpu_alert1>;
734 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
735 };
736};
737
738&thermal_zones {
739 board_thermal: board_thermal {
740 polling-delay-passive = <1250>; /* milliseconds */
741 polling-delay = <1500>; /* milliseconds */
742
743 /* sensor ID */
744 thermal-sensors = <&tmp102 0>;
745
746 board_trips: trips {
747 board_alert0: board_alert {
748 temperature = <40000>; /* millicelsius */
749 hysteresis = <2000>; /* millicelsius */
750 type = "active";
751 };
752
753 board_crit: board_crit {
754 temperature = <105000>; /* millicelsius */
755 hysteresis = <0>; /* millicelsius */
756 type = "critical";
757 };
758 };
759
760 board_cooling_maps: cooling-maps {
761 map0 {
762 trip = <&board_alert0>;
763 cooling-device =
764 <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
765 };
766 };
767 };
768};
769
770&dss {
771 status = "ok";
772
773 vdda_video-supply = <&ldoln_reg>;
774};
775
776&hdmi {
777 status = "ok";
778 vdda-supply = <&ldo4_reg>;
779
780 pinctrl-names = "default";
781 pinctrl-0 = <&hdmi_pins>;
782
783 port {
784 hdmi_out: endpoint {
785 remote-endpoint = <&tpd12s015_in>;
786 };
787 };
788};
789
790&pcie1 {
791 gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
792};
793
794&mcasp3 {
795 #sound-dai-cells = <0>;
796 pinctrl-names = "default", "sleep";
797 pinctrl-0 = <&mcasp3_pins_default>;
798 pinctrl-1 = <&mcasp3_pins_sleep>;
799 status = "okay";
800
801 op-mode = <0>; /* MCASP_IIS_MODE */
802 tdm-slots = <2>;
803 /* 4 serializers */
804 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
805 1 2 0 0
806 >;
807};
808
809&mailbox5 {
810 status = "okay";
811 mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
812 status = "okay";
813 };
814 mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
815 status = "okay";
816 };
817};
818
819&mailbox6 {
820 status = "okay";
821 mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
822 status = "okay";
823 };
824 mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
825 status = "okay";
826 };
827};
2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra74x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13
14/ {
15 model = "TI AM5728 BeagleBoard-X15";
16 compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
17
18 aliases {
19 rtc0 = &mcp_rtc;
20 rtc1 = &tps659038_rtc;
21 rtc2 = &rtc;
22 display0 = &hdmi0;
23 };
24
25 memory {
26 device_type = "memory";
27 reg = <0x80000000 0x80000000>;
28 };
29
30 vdd_3v3: fixedregulator-vdd_3v3 {
31 compatible = "regulator-fixed";
32 regulator-name = "vdd_3v3";
33 vin-supply = <®en1>;
34 regulator-min-microvolt = <3300000>;
35 regulator-max-microvolt = <3300000>;
36 };
37
38 aic_dvdd: fixedregulator-aic_dvdd {
39 compatible = "regulator-fixed";
40 regulator-name = "aic_dvdd_fixed";
41 vin-supply = <&vdd_3v3>;
42 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <1800000>;
44 };
45
46 vtt_fixed: fixedregulator-vtt {
47 /* TPS51200 */
48 compatible = "regulator-fixed";
49 regulator-name = "vtt_fixed";
50 vin-supply = <&smps3_reg>;
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
53 regulator-always-on;
--- 34 unchanged lines hidden (view full) ---
88 linux,default-trigger = "ide-disk";
89 default-state = "off";
90 };
91 };
92
93 gpio_fan: gpio_fan {
94 /* Based on 5v 500mA AFB02505HHB */
95 compatible = "gpio-fan";
96 gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
97 gpio-fan,speed-map = <0 0>,
98 <13000 1>;
99 #cooling-cells = <2>;
100 };
101
102 extcon_usb1: extcon_usb1 {
103 compatible = "linux,extcon-usb-gpio";
104 id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
105 pinctrl-names = "default";
106 pinctrl-0 = <&extcon_usb1_pins>;
107 };
108
109 hdmi0: connector {
110 compatible = "hdmi-connector";
111 label = "hdmi";
112
113 type = "a";
114
115 port {
116 hdmi_connector_in: endpoint {
117 remote-endpoint = <&tpd12s015_out>;
118 };
119 };
120 };
121
122 tpd12s015: encoder {
123 compatible = "ti,tpd12s015";
124
125 pinctrl-names = "default";
126 pinctrl-0 = <&tpd12s015_pins>;
127
128 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
129 <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
130 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
131
132 ports {
133 #address-cells = <1>;
134 #size-cells = <0>;
135
136 port@0 {
137 reg = <0>;
138
139 tpd12s015_in: endpoint {
140 remote-endpoint = <&hdmi_out>;
141 };
142 };
143
144 port@1 {
145 reg = <1>;
146
147 tpd12s015_out: endpoint {
148 remote-endpoint = <&hdmi_connector_in>;
149 };
150 };
151 };
152 };
153
154 sound0: sound@0 {
155 compatible = "simple-audio-card";
156 simple-audio-card,name = "BeagleBoard-X15";
157 simple-audio-card,widgets =
158 "Line", "Line Out",
159 "Line", "Line In";
160 simple-audio-card,routing =
161 "Line Out", "LLOUT",
162 "Line Out", "RLOUT",
163 "MIC2L", "Line In",
164 "MIC2R", "Line In";
165 simple-audio-card,format = "dsp_b";
166 simple-audio-card,bitclock-master = <&sound0_master>;
167 simple-audio-card,frame-master = <&sound0_master>;
168 simple-audio-card,bitclock-inversion;
169
170 simple-audio-card,cpu {
171 sound-dai = <&mcasp3>;
172 };
173
174 sound0_master: simple-audio-card,codec {
175 sound-dai = <&tlv320aic3104>;
176 clocks = <&clkout2_clk>;
177 };
178 };
179};
180
181&dra7_pmx_core {
182 leds_pins_default: leds_pins_default {
183 pinctrl-single,pins = <
184 DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
185 DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
186 DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
187 DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
188 >;
189 };
190
191 i2c1_pins_default: i2c1_pins_default {
192 pinctrl-single,pins = <
193 DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
194 DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
195 >;
196 };
197
198 hdmi_pins: pinmux_hdmi_pins {
199 pinctrl-single,pins = <
200 DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
201 DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
202 >;
203 };
204
205 i2c3_pins_default: i2c3_pins_default {
206 pinctrl-single,pins = <
207 DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
208 DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
209 >;
210 };
211
212 uart3_pins_default: uart3_pins_default {
213 pinctrl-single,pins = <
214 DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
215 DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
216 >;
217 };
218
219 mmc1_pins_default: mmc1_pins_default {
220 pinctrl-single,pins = <
221 DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
222 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
223 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
224 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
225 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
226 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
227 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
228 >;
229 };
230
231 mmc2_pins_default: mmc2_pins_default {
232 pinctrl-single,pins = <
233 DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
234 DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
235 DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
236 DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
237 DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
238 DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
239 DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
240 DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
241 DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
242 DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
243 >;
244 };
245
246 cpsw_pins_default: cpsw_pins_default {
247 pinctrl-single,pins = <
248 /* Slave 1 */
249 DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
250 DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
251 DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
252 DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
253 DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
254 DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
255 DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
256 DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
257 DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
258 DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
259 DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
260 DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
261
262 /* Slave 2 */
263 DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
264 DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
265 DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
266 DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
267 DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
268 DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
269 DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
270 DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
271 DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
272 DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
273 DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
274 DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
275 >;
276
277 };
278
279 cpsw_pins_sleep: cpsw_pins_sleep {
280 pinctrl-single,pins = <
281 /* Slave 1 */
282 DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
283 DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
284 DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
285 DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
286 DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
287 DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
288 DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
289 DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
290 DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
291 DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
292 DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
293 DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
294
295 /* Slave 2 */
296 DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
297 DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
298 DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
299 DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
300 DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
301 DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
302 DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
303 DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
304 DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
305 DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
306 DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
307 DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
308 >;
309 };
310
311 davinci_mdio_pins_default: davinci_mdio_pins_default {
312 pinctrl-single,pins = <
313 /* MDIO */
314 DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
315 DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
316 >;
317 };
318
319 davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
320 pinctrl-single,pins = <
321 DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
322 DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
323 >;
324 };
325
326 tps659038_pins_default: tps659038_pins_default {
327 pinctrl-single,pins = <
328 DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
329 >;
330 };
331
332 tmp102_pins_default: tmp102_pins_default {
333 pinctrl-single,pins = <
334 DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
335 >;
336 };
337
338 mcp79410_pins_default: mcp79410_pins_default {
339 pinctrl-single,pins = <
340 DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
341 >;
342 };
343
344 usb1_pins: pinmux_usb1_pins {
345 pinctrl-single,pins = <
346 DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
347 >;
348 };
349
350 extcon_usb1_pins: extcon_usb1_pins {
351 pinctrl-single,pins = <
352 DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
353 >;
354 };
355
356 tpd12s015_pins: pinmux_tpd12s015_pins {
357 pinctrl-single,pins = <
358 DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
359 DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
360 DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
361 >;
362 };
363
364 clkout2_pins_default: clkout2_pins_default {
365 pinctrl-single,pins = <
366 DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
367 >;
368 };
369
370 clkout2_pins_sleep: clkout2_pins_sleep {
371 pinctrl-single,pins = <
372 DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
373 >;
374 };
375
376 mcasp3_pins_default: mcasp3_pins_default {
377 pinctrl-single,pins = <
378 DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
379 DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
380 DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
381 DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
382 >;
383 };
384
385 mcasp3_pins_sleep: mcasp3_pins_sleep {
386 pinctrl-single,pins = <
387 DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
388 DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
389 DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
390 DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
391 >;
392 };
393};
394
395&i2c1 {
396 status = "okay";
397 pinctrl-names = "default";
398 pinctrl-0 = <&i2c1_pins_default>;
399 clock-frequency = <400000>;
400
--- 60 unchanged lines hidden (view full) ---
461 regulator-max-microvolt = <1800000>;
462 regulator-always-on;
463 regulator-boot-on;
464 };
465
466 /* SMPS9 unused */
467
468 ldo1_reg: ldo1 {
469 /* VDD_SD / VDDSHV8 */
470 regulator-name = "ldo1";
471 regulator-min-microvolt = <1800000>;
472 regulator-max-microvolt = <3300000>;
473 regulator-boot-on;
474 regulator-always-on;
475 };
476
477 ldo2_reg: ldo2 {
478 /* VDD_SHV5 */
479 regulator-name = "ldo2";
480 regulator-min-microvolt = <3300000>;
481 regulator-max-microvolt = <3300000>;
482 regulator-always-on;
483 regulator-boot-on;
484 };
485
486 ldo3_reg: ldo3 {
487 /* VDDA_1V8_PHYA */
488 regulator-name = "ldo3";
489 regulator-min-microvolt = <1800000>;
490 regulator-max-microvolt = <1800000>;
491 regulator-always-on;
492 regulator-boot-on;
493 };
494
495 ldo4_reg: ldo4 {
496 /* VDDA_1V8_PHYB */
497 regulator-name = "ldo4";
498 regulator-min-microvolt = <1800000>;
499 regulator-max-microvolt = <1800000>;
500 regulator-always-on;
501 regulator-boot-on;
502 };
503
504 ldo9_reg: ldo9 {
505 /* VDD_RTC */
506 regulator-name = "ldo9";
507 regulator-min-microvolt = <1050000>;
508 regulator-max-microvolt = <1050000>;
509 regulator-always-on;
510 regulator-boot-on;
511 };
--- 39 unchanged lines hidden (view full) ---
551 ti,palmas-long-press-seconds = <12>;
552 };
553
554 tps659038_gpio: tps659038_gpio {
555 compatible = "ti,palmas-gpio";
556 gpio-controller;
557 #gpio-cells = <2>;
558 };
559
560 extcon_usb2: tps659038_usb {
561 compatible = "ti,palmas-usb-vid";
562 ti,enable-vbus-detection;
563 ti,enable-id-detection;
564 id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
565 };
566
567 };
568
569 tmp102: tmp102@48 {
570 compatible = "ti,tmp102";
571 reg = <0x48>;
572 pinctrl-names = "default";
573 pinctrl-0 = <&tmp102_pins_default>;
574 interrupt-parent = <&gpio7>;
575 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
576 #thermal-sensor-cells = <1>;
577 };
578
579 tlv320aic3104: tlv320aic3104@18 {
580 #sound-dai-cells = <0>;
581 compatible = "ti,tlv320aic3104";
582 reg = <0x18>;
583 pinctrl-names = "default", "sleep";
584 pinctrl-0 = <&clkout2_pins_default>;
585 pinctrl-1 = <&clkout2_pins_sleep>;
586 status = "okay";
587 adc-settle-ms = <40>;
588
589 AVDD-supply = <&vdd_3v3>;
590 IOVDD-supply = <&vdd_3v3>;
591 DRVDD-supply = <&vdd_3v3>;
592 DVDD-supply = <&aic_dvdd>;
593 };
594};
595
596&i2c3 {
597 status = "okay";
598 pinctrl-names = "default";
599 pinctrl-0 = <&i2c3_pins_default>;
600 clock-frequency = <400000>;
601
602 mcp_rtc: rtc@6f {
603 compatible = "microchip,mcp7941x";
604 reg = <0x6f>;
605 interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
606 <&dra7_pmx_core 0x424>;
607 interrupt-names = "irq", "wakeup";
608
609 pinctrl-names = "default";
610 pinctrl-0 = <&mcp79410_pins_default>;
611
612 vcc-supply = <&vdd_3v3>;
613 wakeup-source;
614 };
615};
--- 5 unchanged lines hidden (view full) ---
621
622&cpu0 {
623 cpu0-supply = <&smps12_reg>;
624 voltage-tolerance = <1>;
625};
626
627&uart3 {
628 status = "okay";
629 interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
630 <&dra7_pmx_core 0x3f8>;
631
632 pinctrl-names = "default";
633 pinctrl-0 = <&uart3_pins_default>;
634};
635
636&mac {
637 status = "okay";
638 pinctrl-names = "default", "sleep";
--- 22 unchanged lines hidden (view full) ---
661
662&mmc1 {
663 status = "okay";
664
665 pinctrl-names = "default";
666 pinctrl-0 = <&mmc1_pins_default>;
667
668 vmmc-supply = <&ldo1_reg>;
669 bus-width = <4>;
670 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
671};
672
673&mmc2 {
674 status = "okay";
675
676 pinctrl-names = "default";
677 pinctrl-0 = <&mmc2_pins_default>;
678
--- 6 unchanged lines hidden (view full) ---
685&sata {
686 status = "okay";
687};
688
689&usb2_phy1 {
690 phy-supply = <&ldousb_reg>;
691};
692
693&usb2_phy2 {
694 phy-supply = <&ldousb_reg>;
695};
696
697&usb1 {
698 dr_mode = "host";
699 pinctrl-names = "default";
700 pinctrl-0 = <&usb1_pins>;
701};
702
703&omap_dwc3_1 {
704 extcon = <&extcon_usb1>;
705};
706
707&omap_dwc3_2 {
708 extcon = <&extcon_usb2>;
709};
710
711&usb2 {
712 /*
713 * Stand alone usage is peripheral only.
714 * However, with some resistor modifications
715 * this port can be used via expansion connectors
716 * as "host" or "dual-role". If so, provide
717 * the necessary dr_mode override in the expansion
718 * board's DT.
719 */
720 dr_mode = "peripheral";
721};
722
723&cpu_trips {
724 cpu_alert1: cpu_alert1 {
725 temperature = <50000>; /* millicelsius */
726 hysteresis = <2000>; /* millicelsius */
727 type = "active";
728 };
729};
730
731&cpu_cooling_maps {
732 map1 {
733 trip = <&cpu_alert1>;
734 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
735 };
736};
737
738&thermal_zones {
739 board_thermal: board_thermal {
740 polling-delay-passive = <1250>; /* milliseconds */
741 polling-delay = <1500>; /* milliseconds */
742
743 /* sensor ID */
744 thermal-sensors = <&tmp102 0>;
745
746 board_trips: trips {
747 board_alert0: board_alert {
748 temperature = <40000>; /* millicelsius */
749 hysteresis = <2000>; /* millicelsius */
750 type = "active";
751 };
752
753 board_crit: board_crit {
754 temperature = <105000>; /* millicelsius */
755 hysteresis = <0>; /* millicelsius */
756 type = "critical";
757 };
758 };
759
760 board_cooling_maps: cooling-maps {
761 map0 {
762 trip = <&board_alert0>;
763 cooling-device =
764 <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
765 };
766 };
767 };
768};
769
770&dss {
771 status = "ok";
772
773 vdda_video-supply = <&ldoln_reg>;
774};
775
776&hdmi {
777 status = "ok";
778 vdda-supply = <&ldo4_reg>;
779
780 pinctrl-names = "default";
781 pinctrl-0 = <&hdmi_pins>;
782
783 port {
784 hdmi_out: endpoint {
785 remote-endpoint = <&tpd12s015_in>;
786 };
787 };
788};
789
790&pcie1 {
791 gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
792};
793
794&mcasp3 {
795 #sound-dai-cells = <0>;
796 pinctrl-names = "default", "sleep";
797 pinctrl-0 = <&mcasp3_pins_default>;
798 pinctrl-1 = <&mcasp3_pins_sleep>;
799 status = "okay";
800
801 op-mode = <0>; /* MCASP_IIS_MODE */
802 tdm-slots = <2>;
803 /* 4 serializers */
804 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
805 1 2 0 0
806 >;
807};
808
809&mailbox5 {
810 status = "okay";
811 mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
812 status = "okay";
813 };
814 mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
815 status = "okay";
816 };
817};
818
819&mailbox6 {
820 status = "okay";
821 mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
822 status = "okay";
823 };
824 mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
825 status = "okay";
826 };
827};