Deleted Added
sdiff udiff text old ( 22975 ) new ( 23964 )
full compact
if_fxp.c (22975) if_fxp.c (23964)
1/*
2 * Copyright (c) 1995, David Greenman
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright

--- 10 unchanged lines hidden (view full) ---

19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
1/*
2 * Copyright (c) 1995, David Greenman
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright

--- 10 unchanged lines hidden (view full) ---

19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 * $Id$
27 * $Id: if_fxp.c,v 1.29 1997/02/22 09:44:05 peter Exp $
28 */
29
30/*
31 * Intel EtherExpress Pro/100B PCI Fast Ethernet driver
32 */
33
34#include "bpfilter.h"
35

--- 47 unchanged lines hidden (view full) ---

83 struct fxp_cb_tx *cbl_base; /* base of TxCB list */
84 struct fxp_cb_tx *cbl_first; /* first active TxCB in list */
85 struct fxp_cb_tx *cbl_last; /* last active TxCB in list */
86 struct mbuf *rfa_headm; /* first mbuf in receive frame area */
87 struct mbuf *rfa_tailm; /* last mbuf in receive frame area */
88 struct fxp_stats *fxp_stats; /* Pointer to interface stats */
89 int tx_queued; /* # of active TxCB's */
90 int promisc_mode; /* promiscuous mode enabled */
28 */
29
30/*
31 * Intel EtherExpress Pro/100B PCI Fast Ethernet driver
32 */
33
34#include "bpfilter.h"
35

--- 47 unchanged lines hidden (view full) ---

83 struct fxp_cb_tx *cbl_base; /* base of TxCB list */
84 struct fxp_cb_tx *cbl_first; /* first active TxCB in list */
85 struct fxp_cb_tx *cbl_last; /* last active TxCB in list */
86 struct mbuf *rfa_headm; /* first mbuf in receive frame area */
87 struct mbuf *rfa_tailm; /* last mbuf in receive frame area */
88 struct fxp_stats *fxp_stats; /* Pointer to interface stats */
89 int tx_queued; /* # of active TxCB's */
90 int promisc_mode; /* promiscuous mode enabled */
91 int phy_primary_addr; /* address of primary PHY */
92 int phy_primary_device; /* device type of primary PHY */
93 int phy_10Mbps_only; /* PHY is 10Mbps-only device */
91};
92
93static u_long fxp_count;
94
95/*
96 * Template for default configuration parameters.
97 * See struct fxp_cb_config for the bit definitions.
98 */

--- 30 unchanged lines hidden (view full) ---

129static char *fxp_probe __P((pcici_t, pcidi_t));
130static void fxp_attach __P((pcici_t, int));
131static void fxp_intr __P((void *));
132static void fxp_start __P((struct ifnet *));
133static int fxp_ioctl __P((struct ifnet *, int, caddr_t));
134static void fxp_init __P((void *));
135static void fxp_stop __P((struct fxp_softc *));
136static void fxp_watchdog __P((struct ifnet *));
94};
95
96static u_long fxp_count;
97
98/*
99 * Template for default configuration parameters.
100 * See struct fxp_cb_config for the bit definitions.
101 */

--- 30 unchanged lines hidden (view full) ---

132static char *fxp_probe __P((pcici_t, pcidi_t));
133static void fxp_attach __P((pcici_t, int));
134static void fxp_intr __P((void *));
135static void fxp_start __P((struct ifnet *));
136static int fxp_ioctl __P((struct ifnet *, int, caddr_t));
137static void fxp_init __P((void *));
138static void fxp_stop __P((struct fxp_softc *));
139static void fxp_watchdog __P((struct ifnet *));
137static void fxp_get_macaddr __P((struct fxp_softc *));
138static int fxp_add_rfabuf __P((struct fxp_softc *, struct mbuf *));
139static void fxp_shutdown __P((int, void *));
140static int fxp_add_rfabuf __P((struct fxp_softc *, struct mbuf *));
141static void fxp_shutdown __P((int, void *));
142static int fxp_mdi_read __P((struct fxp_csr *, int, int));
143static void fxp_mdi_write __P((struct fxp_csr *, int, int, int));
144static void fxp_read_eeprom __P((struct fxp_csr *, u_short *, int, int));
140
145
146
141timeout_t fxp_stats_update;
142
143static struct pci_device fxp_device = {
144 "fxp",
145 fxp_probe,
146 fxp_attach,
147 &fxp_count,
148 NULL

--- 54 unchanged lines hidden (view full) ---

203 */
204static char *
205fxp_probe(config_id, device_id)
206 pcici_t config_id;
207 pcidi_t device_id;
208{
209 if (((device_id & 0xffff) == FXP_VENDORID_INTEL) &&
210 ((device_id >> 16) & 0xffff) == FXP_DEVICEID_i82557)
147timeout_t fxp_stats_update;
148
149static struct pci_device fxp_device = {
150 "fxp",
151 fxp_probe,
152 fxp_attach,
153 &fxp_count,
154 NULL

--- 54 unchanged lines hidden (view full) ---

209 */
210static char *
211fxp_probe(config_id, device_id)
212 pcici_t config_id;
213 pcidi_t device_id;
214{
215 if (((device_id & 0xffff) == FXP_VENDORID_INTEL) &&
216 ((device_id >> 16) & 0xffff) == FXP_DEVICEID_i82557)
211 return ("Intel EtherExpress Pro/100B Fast Ethernet");
217 return ("Intel EtherExpress Pro 10/100B Ethernet");
212
213 return NULL;
214}
215
216/*
217 * Allocate data structures and attach the device.
218 */
219static void
220fxp_attach(config_id, unit)
221 pcici_t config_id;
222 int unit;
223{
224 struct fxp_softc *sc;
225 struct ifnet *ifp;
226 vm_offset_t pbase;
227 int s, i;
218
219 return NULL;
220}
221
222/*
223 * Allocate data structures and attach the device.
224 */
225static void
226fxp_attach(config_id, unit)
227 pcici_t config_id;
228 int unit;
229{
230 struct fxp_softc *sc;
231 struct ifnet *ifp;
232 vm_offset_t pbase;
233 int s, i;
234 u_short data;
228
229 sc = malloc(sizeof(struct fxp_softc), M_DEVBUF, M_NOWAIT);
230 if (sc == NULL)
231 return;
232 bzero(sc, sizeof(struct fxp_softc));
233
234 s = splimp();
235

--- 34 unchanged lines hidden (view full) ---

270 * Pre-allocate our receive buffers.
271 */
272 for (i = 0; i < FXP_NRFABUFS; i++) {
273 if (fxp_add_rfabuf(sc, NULL) != 0) {
274 goto malloc_fail;
275 }
276 }
277
235
236 sc = malloc(sizeof(struct fxp_softc), M_DEVBUF, M_NOWAIT);
237 if (sc == NULL)
238 return;
239 bzero(sc, sizeof(struct fxp_softc));
240
241 s = splimp();
242

--- 34 unchanged lines hidden (view full) ---

277 * Pre-allocate our receive buffers.
278 */
279 for (i = 0; i < FXP_NRFABUFS; i++) {
280 if (fxp_add_rfabuf(sc, NULL) != 0) {
281 goto malloc_fail;
282 }
283 }
284
285 /*
286 * Get info about the primary PHY
287 */
288 fxp_read_eeprom(sc->csr, (u_short *)&data, 6, 1);
289 sc->phy_primary_addr = data & 0xff;
290 sc->phy_primary_device = (data >> 8) & 0x3f;
291 sc->phy_10Mbps_only = data >> 15;
292
278 ifp = &sc->arpcom.ac_if;
279 ifp->if_softc = sc;
280 ifp->if_unit = unit;
281 ifp->if_name = "fxp";
282 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
283 ifp->if_ioctl = fxp_ioctl;
284 ifp->if_output = ether_output;
285 ifp->if_start = fxp_start;
286 ifp->if_watchdog = fxp_watchdog;
287 ifp->if_baudrate = 100000000;
288 ifp->if_init = fxp_init;
289
293 ifp = &sc->arpcom.ac_if;
294 ifp->if_softc = sc;
295 ifp->if_unit = unit;
296 ifp->if_name = "fxp";
297 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
298 ifp->if_ioctl = fxp_ioctl;
299 ifp->if_output = ether_output;
300 ifp->if_start = fxp_start;
301 ifp->if_watchdog = fxp_watchdog;
302 ifp->if_baudrate = 100000000;
303 ifp->if_init = fxp_init;
304
290 fxp_get_macaddr(sc);
291 printf("fxp%d: Ethernet address %6D\n", unit,
292 sc->arpcom.ac_enaddr, ":");
305 /*
306 * Read MAC address
307 */
308 fxp_read_eeprom(sc->csr, (u_short *)sc->arpcom.ac_enaddr, 0, 3);
309 printf("fxp%d: Ethernet address %6D", unit, sc->arpcom.ac_enaddr, ":");
310 if (sc->phy_10Mbps_only)
311 printf(", 10Mbps");
312 printf("\n");
293
294 /*
295 * Attach the interface.
296 */
297 if_attach(ifp);
298 ether_ifattach(ifp);
299
300#if NBPFILTER > 0

--- 22 unchanged lines hidden (view full) ---

323 m_freem(sc->rfa_headm);
324fail:
325 if (sc)
326 free(sc, M_DEVBUF);
327 splx(s);
328}
329
330/*
313
314 /*
315 * Attach the interface.
316 */
317 if_attach(ifp);
318 ether_ifattach(ifp);
319
320#if NBPFILTER > 0

--- 22 unchanged lines hidden (view full) ---

343 m_freem(sc->rfa_headm);
344fail:
345 if (sc)
346 free(sc, M_DEVBUF);
347 splx(s);
348}
349
350/*
331 * Read station (MAC) address from serial EEPROM. Basically, you
332 * manually shift in the read opcode (one bit at a time) and then
333 * shift in the address, and then you shift out the data (all of
334 * this one bit at a time). The word size is 16 bits, so you have
335 * to provide the address for every 16 bits of data. The MAC address
336 * is in the first 3 words (6 bytes total).
351 * Read from the serial EEPROM. Basically, you manually shift in
352 * the read opcode (one bit at a time) and then shift in the address,
353 * and then you shift out the data (all of this one bit at a time).
354 * The word size is 16 bits, so you have to provide the address for
355 * every 16 bits of data.
337 */
338static void
356 */
357static void
339fxp_get_macaddr(sc)
340 struct fxp_softc *sc;
341{
358fxp_read_eeprom(csr, data, offset, words)
342 struct fxp_csr *csr;
359 struct fxp_csr *csr;
343 u_short reg, *data;
360 u_short *data;
361 int offset;
362 int words;
363{
364 u_short reg;
344 int i, x;
345
365 int i, x;
366
346 csr = sc->csr;
347 data = (u_short *)sc->arpcom.ac_enaddr;
348
349 for (i = 0; i < 3; i++) {
367 for (i = 0; i < words; i++) {
350 csr->eeprom_control = FXP_EEPROM_EECS;
351 /*
352 * Shift in read opcode.
353 */
354 for (x = 3; x > 0; x--) {
355 if (FXP_EEPROM_OPC_READ & (1 << (x - 1))) {
356 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
357 } else {

--- 4 unchanged lines hidden (view full) ---

362 DELAY(1);
363 csr->eeprom_control = reg;
364 DELAY(1);
365 }
366 /*
367 * Shift in address.
368 */
369 for (x = 6; x > 0; x--) {
368 csr->eeprom_control = FXP_EEPROM_EECS;
369 /*
370 * Shift in read opcode.
371 */
372 for (x = 3; x > 0; x--) {
373 if (FXP_EEPROM_OPC_READ & (1 << (x - 1))) {
374 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
375 } else {

--- 4 unchanged lines hidden (view full) ---

380 DELAY(1);
381 csr->eeprom_control = reg;
382 DELAY(1);
383 }
384 /*
385 * Shift in address.
386 */
387 for (x = 6; x > 0; x--) {
370 if (i & (1 << (x - 1))) {
388 if ((i + offset) & (1 << (x - 1))) {
371 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
372 } else {
373 reg = FXP_EEPROM_EECS;
374 }
375 csr->eeprom_control = reg;
376 csr->eeprom_control = reg | FXP_EEPROM_EESK;
377 DELAY(1);
378 csr->eeprom_control = reg;

--- 480 unchanged lines hidden (view full) ---

859 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */
860 cbp->dma_bce = 0; /* (disable) dma max counters */
861 cbp->late_scb = 0; /* (don't) defer SCB update */
862 cbp->tno_int = 0; /* (disable) tx not okay interrupt */
863 cbp->ci_int = 0; /* interrupt on CU not active */
864 cbp->save_bf = prm; /* save bad frames */
865 cbp->disc_short_rx = !prm; /* discard short packets */
866 cbp->underrun_retry = 1; /* retry mode (1) on DMA underrun */
389 reg = FXP_EEPROM_EECS | FXP_EEPROM_EEDI;
390 } else {
391 reg = FXP_EEPROM_EECS;
392 }
393 csr->eeprom_control = reg;
394 csr->eeprom_control = reg | FXP_EEPROM_EESK;
395 DELAY(1);
396 csr->eeprom_control = reg;

--- 480 unchanged lines hidden (view full) ---

877 cbp->tx_dma_bytecount = 0; /* (no) tx DMA max */
878 cbp->dma_bce = 0; /* (disable) dma max counters */
879 cbp->late_scb = 0; /* (don't) defer SCB update */
880 cbp->tno_int = 0; /* (disable) tx not okay interrupt */
881 cbp->ci_int = 0; /* interrupt on CU not active */
882 cbp->save_bf = prm; /* save bad frames */
883 cbp->disc_short_rx = !prm; /* discard short packets */
884 cbp->underrun_retry = 1; /* retry mode (1) on DMA underrun */
867 cbp->mediatype = 1; /* (MII) interface mode */
885 cbp->mediatype = !sc->phy_10Mbps_only; /* interface mode */
868 cbp->nsai = 1; /* (don't) disable source addr insert */
869 cbp->preamble_length = 2; /* (7 byte) preamble */
870 cbp->loopback = 0; /* (don't) loopback */
871 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */
872 cbp->linear_pri_mode = 0; /* (wait after xmit only) */
873 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */
874 cbp->promiscuous = prm; /* promiscuous mode */
875 cbp->bcast_disable = 0; /* (don't) disable broadcasts */

--- 60 unchanged lines hidden (view full) ---

936
937 /*
938 * Initialize receiver buffer area - RFA.
939 */
940 fxp_scb_wait(csr);
941 csr->scb_general = vtophys(sc->rfa_headm->m_ext.ext_buf);
942 csr->scb_command = FXP_SCB_COMMAND_RU_START;
943
886 cbp->nsai = 1; /* (don't) disable source addr insert */
887 cbp->preamble_length = 2; /* (7 byte) preamble */
888 cbp->loopback = 0; /* (don't) loopback */
889 cbp->linear_priority = 0; /* (normal CSMA/CD operation) */
890 cbp->linear_pri_mode = 0; /* (wait after xmit only) */
891 cbp->interfrm_spacing = 6; /* (96 bits of) interframe spacing */
892 cbp->promiscuous = prm; /* promiscuous mode */
893 cbp->bcast_disable = 0; /* (don't) disable broadcasts */

--- 60 unchanged lines hidden (view full) ---

954
955 /*
956 * Initialize receiver buffer area - RFA.
957 */
958 fxp_scb_wait(csr);
959 csr->scb_general = vtophys(sc->rfa_headm->m_ext.ext_buf);
960 csr->scb_command = FXP_SCB_COMMAND_RU_START;
961
962 /*
963 * Toggle a few bits in the DP83840 PHY.
964 */
965 if (sc->phy_primary_device == FXP_PHY_DP83840) {
966 fxp_mdi_write(sc->csr, sc->phy_primary_addr, FXP_DP83840_PCR,
967 fxp_mdi_read(sc->csr, sc->phy_primary_addr, FXP_DP83840_PCR) |
968 FXP_DP83840_PCR_LED4_MODE | /* LED4 always indicates duplex */
969 FXP_DP83840_PCR_F_CONNECT | /* force link disconnect bypass */
970 FXP_DP83840_PCR_BIT10); /* XXX I have no idea */
971 }
972
944 ifp->if_flags |= IFF_RUNNING;
945 ifp->if_flags &= ~IFF_OACTIVE;
946 splx(s);
947
948 /*
949 * Start stats updater.
950 */
951 timeout(fxp_stats_update, sc, hz);

--- 57 unchanged lines hidden (view full) ---

1009 sc->rfa_headm = m;
1010 }
1011 sc->rfa_tailm = m;
1012
1013 return (m == oldm);
1014}
1015
1016static int
973 ifp->if_flags |= IFF_RUNNING;
974 ifp->if_flags &= ~IFF_OACTIVE;
975 splx(s);
976
977 /*
978 * Start stats updater.
979 */
980 timeout(fxp_stats_update, sc, hz);

--- 57 unchanged lines hidden (view full) ---

1038 sc->rfa_headm = m;
1039 }
1040 sc->rfa_tailm = m;
1041
1042 return (m == oldm);
1043}
1044
1045static int
1046fxp_mdi_read(csr, phy, reg)
1047 struct fxp_csr *csr;
1048 int phy;
1049 int reg;
1050{
1051 int count = 10000;
1052
1053 csr->mdi_control = (FXP_MDI_READ << 26) | (reg << 16) | (phy << 21);
1054
1055 while ((csr->mdi_control & 0x10000000) == 0 && count--)
1056 DELAY(1);
1057
1058 if (count <= 0)
1059 printf("fxp_mdi_read: timed out\n");
1060
1061 return (csr->mdi_control & 0xffff);
1062}
1063
1064static void
1065fxp_mdi_write(csr, phy, reg, value)
1066 struct fxp_csr *csr;
1067 int phy;
1068 int reg;
1069 int value;
1070{
1071 int count = 10000;
1072
1073 csr->mdi_control = (FXP_MDI_WRITE << 26) | (reg << 16) | (phy << 21)
1074 | (value & 0xffff);
1075
1076 while ((csr->mdi_control & 10000000) == 0 && count--)
1077 DELAY(1);
1078
1079 if (count <= 0)
1080 printf("fxp_mdi_write: timed out\n");
1081}
1082
1083static int
1017fxp_ioctl(ifp, command, data)
1018 struct ifnet *ifp;
1019 int command;
1020 caddr_t data;
1021{
1022 struct ifaddr *ifa = (struct ifaddr *) data;
1023 struct fxp_softc *sc = ifp->if_softc;
1024 struct ifreq *ifr = (struct ifreq *) data;

--- 44 unchanged lines hidden --- 		1084fxp_ioctl(ifp, command, data)
1085 struct ifnet *ifp;
1086 int command;
1087 caddr_t data;
1088{
1089 struct ifaddr *ifa = (struct ifaddr *) data;
1090 struct fxp_softc *sc = ifp->if_softc;
1091 struct ifreq *ifr = (struct ifreq *) data;

--- 44 unchanged lines hidden ---