1/*- 2 * Copyright (c) 2005, M. Warner Losh 3 * All rights reserved. 4 * Copyright (c) 1995, David Greenman 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice unmodified, this list of conditions, and the following 12 * disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 31#include <sys/cdefs.h>
|
32__FBSDID("$FreeBSD: head/sys/dev/ed/if_ed_novell.c 149840 2005-09-07 03:20:33Z imp $");
|
32__FBSDID("$FreeBSD: head/sys/dev/ed/if_ed_novell.c 154924 2006-01-27 19:10:13Z imp $"); |
33 34#include "opt_ed.h" 35 36#include <sys/param.h> 37#include <sys/systm.h> 38#include <sys/sockio.h> 39#include <sys/mbuf.h> 40#include <sys/kernel.h> 41#include <sys/socket.h> 42#include <sys/syslog.h> 43 44#include <sys/bus.h> 45 46#include <machine/bus.h> 47#include <sys/rman.h> 48#include <machine/resource.h> 49 50#include <net/ethernet.h> 51#include <net/if.h> 52#include <net/if_arp.h> 53#include <net/if_dl.h> 54#include <net/if_mib.h> 55#include <net/if_media.h> 56 57#include <net/bpf.h> 58 59#include <dev/ed/if_edreg.h> 60#include <dev/ed/if_edvar.h> 61 62static int ed_probe_gwether(device_t); 63 64/* 65 * Probe and vendor-specific initialization routine for NE1000/2000 boards 66 */ 67int 68ed_probe_Novell_generic(device_t dev, int flags) 69{ 70 struct ed_softc *sc = device_get_softc(dev); 71 u_int memsize; 72 int error; 73 u_char tmp; 74 static char test_pattern[32] = "THIS is A memory TEST pattern"; 75 char test_buffer[32]; 76 77 /* Reset the board */ 78 if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_GWETHER) { 79 ed_asic_outb(sc, ED_NOVELL_RESET, 0); 80 DELAY(200); 81 } 82 tmp = ed_asic_inb(sc, ED_NOVELL_RESET); 83 84 /* 85 * I don't know if this is necessary; probably cruft leftover from 86 * Clarkson packet driver code. Doesn't do a thing on the boards I've 87 * tested. -DG 88 */ 89 ed_asic_outb(sc, ED_NOVELL_RESET, tmp); 90 DELAY(5000); 91 92 /* 93 * This is needed because some NE clones apparently don't reset the 94 * NIC properly (or the NIC chip doesn't reset fully on power-up) XXX 95 * - this makes the probe invasive! ...Done against my better 96 * judgement. -DLG 97 */ 98 ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP); 99 DELAY(5000); 100 101 /* Make sure that we really have an 8390 based board */ 102 if (!ed_probe_generic8390(sc)) 103 return (ENXIO); 104 105 sc->vendor = ED_VENDOR_NOVELL; 106 sc->mem_shared = 0; 107 sc->cr_proto = ED_CR_RD2; 108 109 /* 110 * Test the ability to read and write to the NIC memory. This has the 111 * side affect of determining if this is an NE1000 or an NE2000. 112 */ 113 114 /* 115 * This prevents packets from being stored in the NIC memory when the 116 * readmem routine turns on the start bit in the CR. 117 */ 118 ed_nic_outb(sc, ED_P0_RCR, ED_RCR_MON); 119 120 /* Temporarily initialize DCR for byte operations */ 121 ed_nic_outb(sc, ED_P0_DCR, ED_DCR_FT1 | ED_DCR_LS); 122 123 ed_nic_outb(sc, ED_P0_PSTART, 8192 / ED_PAGE_SIZE); 124 ed_nic_outb(sc, ED_P0_PSTOP, 16384 / ED_PAGE_SIZE); 125 126 sc->isa16bit = 0; 127 128 /* 129 * Write a test pattern in byte mode. If this fails, then there 130 * probably isn't any memory at 8k - which likely means that the board 131 * is an NE2000. 132 */ 133 ed_pio_writemem(sc, test_pattern, 8192, sizeof(test_pattern)); 134 ed_pio_readmem(sc, 8192, test_buffer, sizeof(test_pattern)); 135 136 if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) == 0) { 137 sc->type = ED_TYPE_NE1000; 138 sc->type_str = "NE1000"; 139 } else { 140 141 /* Not an NE1000 - try NE2000 */ 142 ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS); 143 ed_nic_outb(sc, ED_P0_PSTART, 16384 / ED_PAGE_SIZE); 144 ed_nic_outb(sc, ED_P0_PSTOP, 32768 / ED_PAGE_SIZE); 145 146 sc->isa16bit = 1; 147 148 /* 149 * Write a test pattern in word mode. If this also fails, then 150 * we don't know what this board is. 151 */ 152 ed_pio_writemem(sc, test_pattern, 16384, sizeof(test_pattern)); 153 ed_pio_readmem(sc, 16384, test_buffer, sizeof(test_pattern)); 154 if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) == 0) { 155 sc->type = ED_TYPE_NE2000; 156 sc->type_str = "NE2000"; 157 } else { 158 return (ENXIO); 159 } 160 } 161 sc->chip_type = ED_CHIP_TYPE_DP8390; 162 163 /* 8k of memory plus an additional 8k if 16bit */ 164 memsize = 8192 + sc->isa16bit * 8192; 165 sc->mem_size = memsize; 166 167 /* NIC memory doesn't start at zero on an NE board */ 168 /* The start address is tied to the bus width */ 169 sc->mem_start = 8192 + sc->isa16bit * 8192; 170 sc->mem_end = sc->mem_start + memsize; 171 sc->tx_page_start = memsize / ED_PAGE_SIZE; 172 173 if (ED_FLAGS_GETTYPE(flags) == ED_FLAGS_GWETHER) { 174 error = ed_probe_gwether(dev); 175 if (error) 176 return (error); 177 } 178 179 /* 180 * Use one xmit buffer if < 16k, two buffers otherwise (if not told 181 * otherwise). 182 */ 183 if ((memsize < 16384) || (flags & ED_FLAGS_NO_MULTI_BUFFERING)) 184 sc->txb_cnt = 1; 185 else 186 sc->txb_cnt = 2; 187 188 sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE; 189 sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE; 190 191 sc->mem_ring = sc->mem_start + sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE; 192 /* clear any pending interrupts that might have occurred above */ 193 ed_nic_outb(sc, ED_P0_ISR, 0xff); 194
|
195 sc->sc_write_mbufs = ed_pio_write_mbufs; |
196 return (0); 197} 198 199int 200ed_probe_Novell(device_t dev, int port_rid, int flags) 201{ 202 struct ed_softc *sc = device_get_softc(dev); 203 int error; 204 205 error = ed_alloc_port(dev, port_rid, ED_NOVELL_IO_PORTS); 206 if (error) 207 return (error); 208 209 sc->asic_offset = ED_NOVELL_ASIC_OFFSET; 210 sc->nic_offset = ED_NOVELL_NIC_OFFSET; 211 212 return ed_probe_Novell_generic(dev, flags); 213} 214 215static int 216ed_probe_gwether(device_t dev) 217{ 218 int x, i, msize = 0; 219 bus_size_t mstart = 0; 220 char pbuf0[ED_PAGE_SIZE], pbuf[ED_PAGE_SIZE], tbuf[ED_PAGE_SIZE]; 221 struct ed_softc *sc = device_get_softc(dev); 222 223 for (i = 0; i < ED_PAGE_SIZE; i++) 224 pbuf0[i] = 0; 225 226 /* Clear all the memory. */ 227 for (x = 1; x < 256; x++) 228 ed_pio_writemem(sc, pbuf0, x * 256, ED_PAGE_SIZE); 229 230 /* Search for the start of RAM. */ 231 for (x = 1; x < 256; x++) { 232 ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE); 233 if (bcmp(pbuf0, tbuf, ED_PAGE_SIZE) == 0) { 234 for (i = 0; i < ED_PAGE_SIZE; i++) 235 pbuf[i] = 255 - x; 236 ed_pio_writemem(sc, pbuf, x * 256, ED_PAGE_SIZE); 237 ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE); 238 if (bcmp(pbuf, tbuf, ED_PAGE_SIZE) == 0) { 239 mstart = x * ED_PAGE_SIZE; 240 msize = ED_PAGE_SIZE; 241 break; 242 } 243 } 244 } 245 if (mstart == 0) { 246 device_printf(dev, "Cannot find start of RAM.\n"); 247 return (ENXIO); 248 } 249 250 /* Probe the size of RAM. */ 251 for (x = (mstart / ED_PAGE_SIZE) + 1; x < 256; x++) { 252 ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE); 253 if (bcmp(pbuf0, tbuf, ED_PAGE_SIZE) == 0) { 254 for (i = 0; i < ED_PAGE_SIZE; i++) 255 pbuf[i] = 255 - x; 256 ed_pio_writemem(sc, pbuf, x * 256, ED_PAGE_SIZE); 257 ed_pio_readmem(sc, x * 256, tbuf, ED_PAGE_SIZE); 258 if (bcmp(pbuf, tbuf, ED_PAGE_SIZE) == 0) 259 msize += ED_PAGE_SIZE; 260 else { 261 break; 262 } 263 } else { 264 break; 265 } 266 } 267 268 if (msize == 0) { 269 device_printf(dev, 270 "Cannot find any RAM, start : %d, x = %d.\n", 271 (int)mstart, x); 272 return (ENXIO); 273 } 274 if (bootverbose) 275 device_printf(dev, 276 "RAM start at %d, size : %d.\n", (int)mstart, msize); 277 278 sc->mem_size = msize; 279 sc->mem_start = mstart; 280 sc->mem_end = msize + mstart; 281 sc->tx_page_start = mstart / ED_PAGE_SIZE; 282 return 0; 283} 284 285void 286ed_Novell_read_mac(struct ed_softc *sc) 287{ 288 int n; 289 uint8_t romdata[16]; 290 291 /* 292 * Pull the MAC address out of the roms that are on the isa 293 * version of these cards. 294 */ 295 ed_pio_readmem(sc, 0, romdata, 16); 296 for (n = 0; n < ETHER_ADDR_LEN; n++) 297 sc->enaddr[n] = romdata[n * (sc->isa16bit + 1)]; 298}
|