1========================================================
2Secondary CPU enable-method "al,alpine-smp" binding
3========================================================
4
5This document describes the "al,alpine-smp" method for
6enabling secondary CPUs. To apply to all CPUs, a single
7"al,alpine-smp" enable method should be defined in the
8"cpus" node.
9
10Enable method name:	"al,alpine-smp"
11Compatible machines:	"al,alpine"
12Compatible CPUs:	"arm,cortex-a15"
13Related properties:	(none)
14
15Note:
16This enable method requires valid nodes compatible with
17"al,alpine-cpu-resume" and "al,alpine-nb-service".
18
19
20* Alpine CPU resume registers
21
22The CPU resume register are used to define required resume address after
23reset.
24
25Properties:
26- compatible : Should contain "al,alpine-cpu-resume".
27- reg : Offset and length of the register set for the device
28
29
30* Alpine System-Fabric Service Registers
31
32The System-Fabric Service Registers allow various operation on CPU and
33system fabric, like powering CPUs off.
34
35Properties:
36- compatible : Should contain "al,alpine-sysfabric-service" and "syscon".
37- reg : Offset and length of the register set for the device
38
39
40Example:
41
42cpus {
43	#address-cells = <1>;
44	#size-cells = <0>;
45	enable-method = "al,alpine-smp";
46
47	cpu@0 {
48		compatible = "arm,cortex-a15";
49		device_type = "cpu";
50		reg = <0>;
51	};
52
53	cpu@1 {
54		compatible = "arm,cortex-a15";
55		device_type = "cpu";
56		reg = <1>;
57	};
58
59	cpu@2 {
60		compatible = "arm,cortex-a15";
61		device_type = "cpu";
62		reg = <2>;
63	};
64
65	cpu@3 {
66		compatible = "arm,cortex-a15";
67		device_type = "cpu";
68		reg = <3>;
69	};
70};
71
72cpu_resume {
73	compatible = "al,alpine-cpu-resume";
74	reg = <0xfbff5ed0 0x30>;
75};
76
77nb_service {
78        compatible = "al,alpine-sysfabric-service", "syscon";
79        reg = <0xfb070000 0x10000>;
80};
81