1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (C) 2012 Samsung Electronics 4 * 5 * Author: InKi Dae <inki.dae@samsung.com> 6 * Author: Donghwa Lee <dh09.lee@samsung.com> 7 */ 8 9#include <common.h> 10#include <log.h> 11#include <linux/delay.h> 12#include <linux/err.h> 13#include <asm/arch/dsim.h> 14#include <asm/arch/mipi_dsim.h> 15 16#include "exynos_mipi_dsi_lowlevel.h" 17 18#define MHZ (1000 * 1000) 19#define FIN_HZ (24 * MHZ) 20 21#define DFIN_PLL_MIN_HZ (6 * MHZ) 22#define DFIN_PLL_MAX_HZ (12 * MHZ) 23 24#define DFVCO_MIN_HZ (500 * MHZ) 25#define DFVCO_MAX_HZ (1000 * MHZ) 26 27#define TRY_GET_FIFO_TIMEOUT (5000 * 2) 28 29/* MIPI-DSIM status types. */ 30enum { 31 DSIM_STATE_INIT, /* should be initialized. */ 32 DSIM_STATE_STOP, /* CPU and LCDC are LP mode. */ 33 DSIM_STATE_HSCLKEN, /* HS clock was enabled. */ 34 DSIM_STATE_ULPS 35}; 36 37/* define DSI lane types. */ 38enum { 39 DSIM_LANE_CLOCK = (1 << 0), 40 DSIM_LANE_DATA0 = (1 << 1), 41 DSIM_LANE_DATA1 = (1 << 2), 42 DSIM_LANE_DATA2 = (1 << 3), 43 DSIM_LANE_DATA3 = (1 << 4) 44}; 45 46static unsigned int dpll_table[15] = { 47 100, 120, 170, 220, 270, 48 320, 390, 450, 510, 560, 49 640, 690, 770, 870, 950 50}; 51 52static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, 53 const unsigned char *data0, unsigned int data1) 54{ 55 unsigned int data_cnt = 0, payload = 0; 56 57 /* in case that data count is more then 4 */ 58 for (data_cnt = 0; data_cnt < data1; data_cnt += 4) { 59 /* 60 * after sending 4bytes per one time, 61 * send remainder data less then 4. 62 */ 63 if ((data1 - data_cnt) < 4) { 64 if ((data1 - data_cnt) == 3) { 65 payload = data0[data_cnt] | 66 data0[data_cnt + 1] << 8 | 67 data0[data_cnt + 2] << 16; 68 debug("count = 3 payload = %x, %x %x %x\n", 69 payload, data0[data_cnt], 70 data0[data_cnt + 1], 71 data0[data_cnt + 2]); 72 } else if ((data1 - data_cnt) == 2) { 73 payload = data0[data_cnt] | 74 data0[data_cnt + 1] << 8; 75 debug("count = 2 payload = %x, %x %x\n", payload, 76 data0[data_cnt], data0[data_cnt + 1]); 77 } else if ((data1 - data_cnt) == 1) { 78 payload = data0[data_cnt]; 79 } 80 } else { 81 /* send 4bytes per one time. */ 82 payload = data0[data_cnt] | 83 data0[data_cnt + 1] << 8 | 84 data0[data_cnt + 2] << 16 | 85 data0[data_cnt + 3] << 24; 86 87 debug("count = 4 payload = %x, %x %x %x %x\n", 88 payload, *(u8 *)(data0 + data_cnt), 89 data0[data_cnt + 1], 90 data0[data_cnt + 2], 91 data0[data_cnt + 3]); 92 } 93 exynos_mipi_dsi_wr_tx_data(dsim, payload); 94 } 95} 96 97int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, 98 const unsigned char *data0, unsigned int data1) 99{ 100 unsigned int timeout = TRY_GET_FIFO_TIMEOUT; 101 unsigned long delay_val, delay; 102 unsigned int check_rx_ack = 0; 103 104 if (dsim->state == DSIM_STATE_ULPS) { 105 debug("state is ULPS.\n"); 106 107 return -EINVAL; 108 } 109 110 delay_val = MHZ / dsim->dsim_config->esc_clk; 111 delay = 10 * delay_val; 112 113 mdelay(delay); 114 115 /* only if transfer mode is LPDT, wait SFR becomes empty. */ 116 if (dsim->state == DSIM_STATE_STOP) { 117 while (!(exynos_mipi_dsi_get_fifo_state(dsim) & 118 SFR_HEADER_EMPTY)) { 119 if ((timeout--) > 0) 120 mdelay(1); 121 else { 122 debug("SRF header fifo is not empty.\n"); 123 return -EINVAL; 124 } 125 } 126 } 127 128 switch (data_id) { 129 /* short packet types of packet types for command. */ 130 case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: 131 case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: 132 case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: 133 case MIPI_DSI_DCS_SHORT_WRITE: 134 case MIPI_DSI_DCS_SHORT_WRITE_PARAM: 135 case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: 136 debug("data0 = %x data1 = %x\n", 137 data0[0], data0[1]); 138 exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); 139 if (check_rx_ack) { 140 /* process response func should be implemented */ 141 return 0; 142 } else { 143 return -EINVAL; 144 } 145 146 /* general command */ 147 case MIPI_DSI_COLOR_MODE_OFF: 148 case MIPI_DSI_COLOR_MODE_ON: 149 case MIPI_DSI_SHUTDOWN_PERIPHERAL: 150 case MIPI_DSI_TURN_ON_PERIPHERAL: 151 exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); 152 if (check_rx_ack) { 153 /* process response func should be implemented. */ 154 return 0; 155 } else { 156 return -EINVAL; 157 } 158 159 /* packet types for video data */ 160 case MIPI_DSI_V_SYNC_START: 161 case MIPI_DSI_V_SYNC_END: 162 case MIPI_DSI_H_SYNC_START: 163 case MIPI_DSI_H_SYNC_END: 164 case MIPI_DSI_END_OF_TRANSMISSION: 165 return 0; 166 167 /* short and response packet types for command */ 168 case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: 169 case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: 170 case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: 171 case MIPI_DSI_DCS_READ: 172 exynos_mipi_dsi_clear_all_interrupt(dsim); 173 exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); 174 /* process response func should be implemented. */ 175 return 0; 176 177 /* long packet type and null packet */ 178 case MIPI_DSI_NULL_PACKET: 179 case MIPI_DSI_BLANKING_PACKET: 180 return 0; 181 case MIPI_DSI_GENERIC_LONG_WRITE: 182 case MIPI_DSI_DCS_LONG_WRITE: 183 { 184 unsigned int payload = 0; 185 186 /* if data count is less then 4, then send 3bytes data. */ 187 if (data1 < 4) { 188 payload = data0[0] | 189 data0[1] << 8 | 190 data0[2] << 16; 191 192 exynos_mipi_dsi_wr_tx_data(dsim, payload); 193 194 debug("count = %d payload = %x,%x %x %x\n", 195 data1, payload, data0[0], 196 data0[1], data0[2]); 197 } else { 198 /* in case that data count is more then 4 */ 199 exynos_mipi_dsi_long_data_wr(dsim, data0, data1); 200 } 201 202 /* put data into header fifo */ 203 exynos_mipi_dsi_wr_tx_header(dsim, data_id, data1 & 0xff, 204 (data1 & 0xff00) >> 8); 205 206 } 207 if (check_rx_ack) 208 /* process response func should be implemented. */ 209 return 0; 210 else 211 return -EINVAL; 212 213 /* packet typo for video data */ 214 case MIPI_DSI_PACKED_PIXEL_STREAM_16: 215 case MIPI_DSI_PACKED_PIXEL_STREAM_18: 216 case MIPI_DSI_PIXEL_STREAM_3BYTE_18: 217 case MIPI_DSI_PACKED_PIXEL_STREAM_24: 218 if (check_rx_ack) { 219 /* process response func should be implemented. */ 220 return 0; 221 } else { 222 return -EINVAL; 223 } 224 default: 225 debug("data id %x is not supported current DSI spec.\n", 226 data_id); 227 228 return -EINVAL; 229 } 230 231 return 0; 232} 233 234int exynos_mipi_dsi_pll_on(struct mipi_dsim_device *dsim, unsigned int enable) 235{ 236 int sw_timeout; 237 238 if (enable) { 239 sw_timeout = 1000; 240 241 exynos_mipi_dsi_clear_interrupt(dsim); 242 exynos_mipi_dsi_enable_pll(dsim, 1); 243 while (1) { 244 sw_timeout--; 245 if (exynos_mipi_dsi_is_pll_stable(dsim)) 246 return 0; 247 if (sw_timeout == 0) 248 return -EINVAL; 249 } 250 } else 251 exynos_mipi_dsi_enable_pll(dsim, 0); 252 253 return 0; 254} 255 256unsigned long exynos_mipi_dsi_change_pll(struct mipi_dsim_device *dsim, 257 unsigned int pre_divider, unsigned int main_divider, 258 unsigned int scaler) 259{ 260 unsigned long dfin_pll, dfvco, dpll_out; 261 unsigned int i, freq_band = 0xf; 262 263 dfin_pll = (FIN_HZ / pre_divider); 264 265 /****************************************************** 266 * Serial Clock(=ByteClk X 8) FreqBand[3:0] * 267 ****************************************************** 268 * ~ 99.99 MHz 0000 269 * 100 ~ 119.99 MHz 0001 270 * 120 ~ 159.99 MHz 0010 271 * 160 ~ 199.99 MHz 0011 272 * 200 ~ 239.99 MHz 0100 273 * 140 ~ 319.99 MHz 0101 274 * 320 ~ 389.99 MHz 0110 275 * 390 ~ 449.99 MHz 0111 276 * 450 ~ 509.99 MHz 1000 277 * 510 ~ 559.99 MHz 1001 278 * 560 ~ 639.99 MHz 1010 279 * 640 ~ 689.99 MHz 1011 280 * 690 ~ 769.99 MHz 1100 281 * 770 ~ 869.99 MHz 1101 282 * 870 ~ 949.99 MHz 1110 283 * 950 ~ 1000 MHz 1111 284 ******************************************************/ 285 if (dfin_pll < DFIN_PLL_MIN_HZ || dfin_pll > DFIN_PLL_MAX_HZ) { 286 debug("fin_pll range should be 6MHz ~ 12MHz\n"); 287 exynos_mipi_dsi_enable_afc(dsim, 0, 0); 288 } else { 289 if (dfin_pll < 7 * MHZ) 290 exynos_mipi_dsi_enable_afc(dsim, 1, 0x1); 291 else if (dfin_pll < 8 * MHZ) 292 exynos_mipi_dsi_enable_afc(dsim, 1, 0x0); 293 else if (dfin_pll < 9 * MHZ) 294 exynos_mipi_dsi_enable_afc(dsim, 1, 0x3); 295 else if (dfin_pll < 10 * MHZ) 296 exynos_mipi_dsi_enable_afc(dsim, 1, 0x2); 297 else if (dfin_pll < 11 * MHZ) 298 exynos_mipi_dsi_enable_afc(dsim, 1, 0x5); 299 else 300 exynos_mipi_dsi_enable_afc(dsim, 1, 0x4); 301 } 302 303 dfvco = dfin_pll * main_divider; 304 debug("dfvco = %lu, dfin_pll = %lu, main_divider = %d\n", 305 dfvco, dfin_pll, main_divider); 306 if (dfvco < DFVCO_MIN_HZ || dfvco > DFVCO_MAX_HZ) 307 debug("fvco range should be 500MHz ~ 1000MHz\n"); 308 309 dpll_out = dfvco / (1 << scaler); 310 debug("dpll_out = %lu, dfvco = %lu, scaler = %d\n", 311 dpll_out, dfvco, scaler); 312 313 for (i = 0; i < ARRAY_SIZE(dpll_table); i++) { 314 if (dpll_out < dpll_table[i] * MHZ) { 315 freq_band = i; 316 break; 317 } 318 } 319 320 debug("freq_band = %d\n", freq_band); 321 322 exynos_mipi_dsi_pll_freq(dsim, pre_divider, main_divider, scaler); 323 324 exynos_mipi_dsi_hs_zero_ctrl(dsim, 0); 325 exynos_mipi_dsi_prep_ctrl(dsim, 0); 326 327 /* Freq Band */ 328 exynos_mipi_dsi_pll_freq_band(dsim, freq_band); 329 330 /* Stable time */ 331 exynos_mipi_dsi_pll_stable_time(dsim, 332 dsim->dsim_config->pll_stable_time); 333 334 /* Enable PLL */ 335 debug("FOUT of mipi dphy pll is %luMHz\n", 336 (dpll_out / MHZ)); 337 338 return dpll_out; 339} 340 341int exynos_mipi_dsi_set_clock(struct mipi_dsim_device *dsim, 342 unsigned int byte_clk_sel, unsigned int enable) 343{ 344 unsigned int esc_div; 345 unsigned long esc_clk_error_rate; 346 unsigned long hs_clk = 0, byte_clk = 0, escape_clk = 0; 347 348 if (enable) { 349 dsim->e_clk_src = byte_clk_sel; 350 351 /* Escape mode clock and byte clock source */ 352 exynos_mipi_dsi_set_byte_clock_src(dsim, byte_clk_sel); 353 354 /* DPHY, DSIM Link : D-PHY clock out */ 355 if (byte_clk_sel == DSIM_PLL_OUT_DIV8) { 356 hs_clk = exynos_mipi_dsi_change_pll(dsim, 357 dsim->dsim_config->p, dsim->dsim_config->m, 358 dsim->dsim_config->s); 359 if (hs_clk == 0) { 360 debug("failed to get hs clock.\n"); 361 return -EINVAL; 362 } 363 364 byte_clk = hs_clk / 8; 365 exynos_mipi_dsi_enable_pll_bypass(dsim, 0); 366 exynos_mipi_dsi_pll_on(dsim, 1); 367 /* DPHY : D-PHY clock out, DSIM link : external clock out */ 368 } else if (byte_clk_sel == DSIM_EXT_CLK_DIV8) 369 debug("not support EXT CLK source for MIPI DSIM\n"); 370 else if (byte_clk_sel == DSIM_EXT_CLK_BYPASS) 371 debug("not support EXT CLK source for MIPI DSIM\n"); 372 373 /* escape clock divider */ 374 esc_div = byte_clk / (dsim->dsim_config->esc_clk); 375 debug("esc_div = %d, byte_clk = %lu, esc_clk = %lu\n", 376 esc_div, byte_clk, dsim->dsim_config->esc_clk); 377 if ((byte_clk / esc_div) >= (20 * MHZ) || 378 (byte_clk / esc_div) > dsim->dsim_config->esc_clk) 379 esc_div += 1; 380 381 escape_clk = byte_clk / esc_div; 382 debug("escape_clk = %lu, byte_clk = %lu, esc_div = %d\n", 383 escape_clk, byte_clk, esc_div); 384 385 /* enable escape clock. */ 386 exynos_mipi_dsi_enable_byte_clock(dsim, 1); 387 388 /* enable byte clk and escape clock */ 389 exynos_mipi_dsi_set_esc_clk_prs(dsim, 1, esc_div); 390 /* escape clock on lane */ 391 exynos_mipi_dsi_enable_esc_clk_on_lane(dsim, 392 (DSIM_LANE_CLOCK | dsim->data_lane), 1); 393 394 debug("byte clock is %luMHz\n", 395 (byte_clk / MHZ)); 396 debug("escape clock that user's need is %lu\n", 397 (dsim->dsim_config->esc_clk / MHZ)); 398 debug("escape clock divider is %x\n", esc_div); 399 debug("escape clock is %luMHz\n", 400 ((byte_clk / esc_div) / MHZ)); 401 402 if ((byte_clk / esc_div) > escape_clk) { 403 esc_clk_error_rate = escape_clk / 404 (byte_clk / esc_div); 405 debug("error rate is %lu over.\n", 406 (esc_clk_error_rate / 100)); 407 } else if ((byte_clk / esc_div) < (escape_clk)) { 408 esc_clk_error_rate = (byte_clk / esc_div) / 409 escape_clk; 410 debug("error rate is %lu under.\n", 411 (esc_clk_error_rate / 100)); 412 } 413 } else { 414 exynos_mipi_dsi_enable_esc_clk_on_lane(dsim, 415 (DSIM_LANE_CLOCK | dsim->data_lane), 0); 416 exynos_mipi_dsi_set_esc_clk_prs(dsim, 0, 0); 417 418 /* disable escape clock. */ 419 exynos_mipi_dsi_enable_byte_clock(dsim, 0); 420 421 if (byte_clk_sel == DSIM_PLL_OUT_DIV8) 422 exynos_mipi_dsi_pll_on(dsim, 0); 423 } 424 425 return 0; 426} 427 428int exynos_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim) 429{ 430 dsim->state = DSIM_STATE_INIT; 431 432 switch (dsim->dsim_config->e_no_data_lane) { 433 case DSIM_DATA_LANE_1: 434 dsim->data_lane = DSIM_LANE_DATA0; 435 break; 436 case DSIM_DATA_LANE_2: 437 dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1; 438 break; 439 case DSIM_DATA_LANE_3: 440 dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 | 441 DSIM_LANE_DATA2; 442 break; 443 case DSIM_DATA_LANE_4: 444 dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 | 445 DSIM_LANE_DATA2 | DSIM_LANE_DATA3; 446 break; 447 default: 448 debug("data lane is invalid.\n"); 449 return -EINVAL; 450 }; 451 452 exynos_mipi_dsi_sw_reset(dsim); 453 exynos_mipi_dsi_dp_dn_swap(dsim, 0); 454 455 return 0; 456} 457 458int exynos_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim, 459 unsigned int enable) 460{ 461 /* enable only frame done interrupt */ 462 exynos_mipi_dsi_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable); 463 464 return 0; 465} 466 467static void convert_to_fb_videomode(struct fb_videomode *mode1, 468 struct vidinfo *mode2) 469{ 470 mode1->xres = mode2->vl_width; 471 mode1->yres = mode2->vl_height; 472 mode1->upper_margin = mode2->vl_vfpd; 473 mode1->lower_margin = mode2->vl_vbpd; 474 mode1->left_margin = mode2->vl_hfpd; 475 mode1->right_margin = mode2->vl_hbpd; 476 mode1->vsync_len = mode2->vl_vspw; 477 mode1->hsync_len = mode2->vl_hspw; 478} 479 480int exynos_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim, 481 struct mipi_dsim_config *dsim_config) 482{ 483 struct exynos_platform_mipi_dsim *dsim_pd; 484 struct fb_videomode lcd_video; 485 struct vidinfo *vid; 486 487 dsim_pd = (struct exynos_platform_mipi_dsim *)dsim->pd; 488 vid = (struct vidinfo *)dsim_pd->lcd_panel_info; 489 490 convert_to_fb_videomode(&lcd_video, vid); 491 492 /* in case of VIDEO MODE (RGB INTERFACE), it sets polarities. */ 493 if (dsim->dsim_config->e_interface == (u32) DSIM_VIDEO) { 494 if (dsim->dsim_config->auto_vertical_cnt == 0) { 495 exynos_mipi_dsi_set_main_disp_vporch(dsim, 496 vid->vl_cmd_allow_len, 497 lcd_video.upper_margin, 498 lcd_video.lower_margin); 499 exynos_mipi_dsi_set_main_disp_hporch(dsim, 500 lcd_video.left_margin, 501 lcd_video.right_margin); 502 exynos_mipi_dsi_set_main_disp_sync_area(dsim, 503 lcd_video.vsync_len, 504 lcd_video.hsync_len); 505 } 506 } 507 508 exynos_mipi_dsi_set_main_disp_resol(dsim, lcd_video.xres, 509 lcd_video.yres); 510 511 exynos_mipi_dsi_display_config(dsim, dsim->dsim_config); 512 513 debug("lcd panel ==> width = %d, height = %d\n", 514 lcd_video.xres, lcd_video.yres); 515 516 return 0; 517} 518 519int exynos_mipi_dsi_init_link(struct mipi_dsim_device *dsim) 520{ 521 unsigned int time_out = 100; 522 523 switch (dsim->state) { 524 case DSIM_STATE_INIT: 525 exynos_mipi_dsi_init_fifo_pointer(dsim, 0x1f); 526 527 /* dsi configuration */ 528 exynos_mipi_dsi_init_config(dsim); 529 exynos_mipi_dsi_enable_lane(dsim, DSIM_LANE_CLOCK, 1); 530 exynos_mipi_dsi_enable_lane(dsim, dsim->data_lane, 1); 531 532 /* set clock configuration */ 533 exynos_mipi_dsi_set_clock(dsim, 534 dsim->dsim_config->e_byte_clk, 1); 535 536 /* check clock and data lane state are stop state */ 537 while (!(exynos_mipi_dsi_is_lane_state(dsim))) { 538 time_out--; 539 if (time_out == 0) { 540 debug("DSI Master is not stop state.\n"); 541 debug("Check initialization process\n"); 542 543 return -EINVAL; 544 } 545 } 546 547 dsim->state = DSIM_STATE_STOP; 548 549 /* BTA sequence counters */ 550 exynos_mipi_dsi_set_stop_state_counter(dsim, 551 dsim->dsim_config->stop_holding_cnt); 552 exynos_mipi_dsi_set_bta_timeout(dsim, 553 dsim->dsim_config->bta_timeout); 554 exynos_mipi_dsi_set_lpdr_timeout(dsim, 555 dsim->dsim_config->rx_timeout); 556 557 return 0; 558 default: 559 debug("DSI Master is already init.\n"); 560 return 0; 561 } 562 563 return 0; 564} 565 566int exynos_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim) 567{ 568 if (dsim->state == DSIM_STATE_STOP) { 569 if (dsim->e_clk_src != DSIM_EXT_CLK_BYPASS) { 570 dsim->state = DSIM_STATE_HSCLKEN; 571 572 /* set LCDC and CPU transfer mode to HS. */ 573 exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0); 574 exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0); 575 576 exynos_mipi_dsi_enable_hs_clock(dsim, 1); 577 578 return 0; 579 } else 580 debug("clock source is external bypass.\n"); 581 } else 582 debug("DSIM is not stop state.\n"); 583 584 return 0; 585} 586 587int exynos_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim, 588 unsigned int mode) 589{ 590 if (mode) { 591 if (dsim->state != DSIM_STATE_HSCLKEN) { 592 debug("HS Clock lane is not enabled.\n"); 593 return -EINVAL; 594 } 595 596 exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0); 597 } else { 598 if (dsim->state == DSIM_STATE_INIT || dsim->state == 599 DSIM_STATE_ULPS) { 600 debug("DSI Master is not STOP or HSDT state.\n"); 601 return -EINVAL; 602 } 603 604 exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0); 605 } 606 607 return 0; 608} 609 610int exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim) 611{ 612 return _exynos_mipi_dsi_get_frame_done_status(dsim); 613} 614 615int exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim) 616{ 617 _exynos_mipi_dsi_clear_frame_done(dsim); 618 619 return 0; 620} 621