1CONFIG_ARM=y 2CONFIG_SKIP_LOWLEVEL_INIT=y 3CONFIG_ARCH_CPU_INIT=y 4CONFIG_ARCH_AT91=y 5CONFIG_TEXT_BASE=0x21f00000 6CONFIG_SYS_MALLOC_LEN=0x80000 7CONFIG_TARGET_AT91SAM9260EK=y 8CONFIG_ATMEL_LEGACY=y 9CONFIG_AT91SAM9260EK=y 10CONFIG_NR_DRAM_BANKS=1 11CONFIG_DM_GPIO=y 12CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20ek" 13CONFIG_DEBUG_UART_BASE=0xfffff200 14CONFIG_DEBUG_UART_CLOCK=132000000 15CONFIG_DEBUG_UART_BOARD_INIT=y 16CONFIG_ENV_OFFSET_REDUND=0x100000 17CONFIG_SYS_LOAD_ADDR=0x22000000 18CONFIG_DEBUG_UART=y 19CONFIG_NAND_BOOT=y 20CONFIG_BOOTDELAY=3 21CONFIG_USE_BOOTARGS=y 22CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" 23CONFIG_USE_BOOTCOMMAND=y 24CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm" 25CONFIG_SYS_CBSIZE=256 26CONFIG_SYS_PBSIZE=281 27# CONFIG_DISPLAY_BOARDINFO is not set 28CONFIG_SYS_PROMPT="U-Boot> " 29# CONFIG_CMD_BDI is not set 30CONFIG_CMD_BOOTZ=y 31# CONFIG_CMD_IMI is not set 32# CONFIG_CMD_LOADS is not set 33CONFIG_CMD_NAND=y 34# CONFIG_CMD_SOURCE is not set 35# CONFIG_CMD_SETEXPR is not set 36CONFIG_CMD_DHCP=y 37CONFIG_BOOTP_BOOTFILESIZE=y 38CONFIG_CMD_PING=y 39CONFIG_CMD_FAT=y 40CONFIG_OF_CONTROL=y 41CONFIG_ENV_IS_IN_NAND=y 42CONFIG_SYS_REDUNDAND_ENVIRONMENT=y 43CONFIG_SYS_RELOC_GD_ENV_ADDR=y 44CONFIG_CLK=y 45CONFIG_CLK_AT91=y 46CONFIG_AT91_GPIO=y 47# CONFIG_MMC is not set 48CONFIG_MTD=y 49CONFIG_NAND_ATMEL=y 50CONFIG_DM_SPI_FLASH=y 51CONFIG_SPI_FLASH_ATMEL=y 52CONFIG_SPI_FLASH_DATAFLASH=y 53CONFIG_MACB=y 54CONFIG_PINCTRL=y 55CONFIG_PINCTRL_AT91=y 56CONFIG_DM_SERIAL=y 57CONFIG_DEBUG_UART_ANNOUNCE=y 58CONFIG_ATMEL_USART=y 59CONFIG_SPI=y 60CONFIG_DM_SPI=y 61CONFIG_TIMER=y 62CONFIG_ATMEL_PIT_TIMER=y 63CONFIG_USB=y 64CONFIG_SYS_USB_OHCI_SLOT_NAME="at91sam9260" 65CONFIG_USB_ATMEL=y 66