memnode.c revision 10106:b235491976d3
1/*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21/*
22 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
23 * Use is subject to license terms.
24 */
25
26#include <sys/systm.h>
27#include <sys/platform_module.h>
28#include <sys/sysmacros.h>
29#include <sys/atomic.h>
30#include <sys/memlist.h>
31#include <sys/memnode.h>
32#include <vm/vm_dep.h>
33
34int max_mem_nodes = 1;		/* max memory nodes on this system */
35
36struct mem_node_conf mem_node_config[MAX_MEM_NODES];
37int mem_node_pfn_shift;
38/*
39 * num_memnodes should be updated atomically and always >=
40 * the number of bits in memnodes_mask or the algorithm may fail.
41 */
42uint16_t num_memnodes;
43mnodeset_t memnodes_mask; /* assumes 8*(sizeof(mnodeset_t)) >= MAX_MEM_NODES */
44
45/*
46 * If set, mem_node_physalign should be a power of two, and
47 * should reflect the minimum address alignment of each node.
48 */
49uint64_t mem_node_physalign;
50
51/*
52 * Platform hooks we will need.
53 */
54
55#pragma weak plat_build_mem_nodes
56#pragma weak plat_slice_add
57#pragma weak plat_slice_del
58
59/*
60 * Adjust the memnode config after a DR operation.
61 *
62 * It is rather tricky to do these updates since we can't
63 * protect the memnode structures with locks, so we must
64 * be mindful of the order in which updates and reads to
65 * these values can occur.
66 */
67void
68mem_node_add_slice(pfn_t start, pfn_t end)
69{
70	int mnode;
71	mnodeset_t newmask, oldmask;
72
73	/*
74	 * DR will pass us the first pfn that is allocatable.
75	 * We need to round down to get the real start of
76	 * the slice.
77	 */
78	if (mem_node_physalign) {
79		start &= ~(btop(mem_node_physalign) - 1);
80		end = roundup(end, btop(mem_node_physalign)) - 1;
81	}
82
83	mnode = PFN_2_MEM_NODE(start);
84	ASSERT(mnode < max_mem_nodes);
85
86	if (cas32((uint32_t *)&mem_node_config[mnode].exists, 0, 1)) {
87		/*
88		 * Add slice to existing node.
89		 */
90		if (start < mem_node_config[mnode].physbase)
91			mem_node_config[mnode].physbase = start;
92		if (end > mem_node_config[mnode].physmax)
93			mem_node_config[mnode].physmax = end;
94	} else {
95		mem_node_config[mnode].physbase = start;
96		mem_node_config[mnode].physmax = end;
97		atomic_add_16(&num_memnodes, 1);
98		do {
99			oldmask = memnodes_mask;
100			newmask = memnodes_mask | (1ull << mnode);
101		} while (cas64(&memnodes_mask, oldmask, newmask) != oldmask);
102	}
103	/*
104	 * Let the common lgrp framework know about the new memory
105	 */
106	lgrp_config(LGRP_CONFIG_MEM_ADD, mnode, MEM_NODE_2_LGRPHAND(mnode));
107}
108
109/*
110 * Remove a PFN range from a memnode.  On some platforms,
111 * the memnode will be created with physbase at the first
112 * allocatable PFN, but later deleted with the MC slice
113 * base address converted to a PFN, in which case we need
114 * to assume physbase and up.
115 */
116void
117mem_node_del_slice(pfn_t start, pfn_t end)
118{
119	int mnode;
120	pgcnt_t delta_pgcnt, node_size;
121	mnodeset_t omask, nmask;
122
123	if (mem_node_physalign) {
124		start &= ~(btop(mem_node_physalign) - 1);
125		end = roundup(end, btop(mem_node_physalign)) - 1;
126	}
127	mnode = PFN_2_MEM_NODE(start);
128
129	ASSERT(mnode < max_mem_nodes);
130	ASSERT(mem_node_config[mnode].exists == 1);
131
132	delta_pgcnt = end - start;
133	node_size = mem_node_config[mnode].physmax -
134	    mem_node_config[mnode].physbase;
135
136	if (node_size > delta_pgcnt) {
137		/*
138		 * Subtract the slice from the memnode.
139		 */
140		if (start <= mem_node_config[mnode].physbase)
141			mem_node_config[mnode].physbase = end + 1;
142		ASSERT(end <= mem_node_config[mnode].physmax);
143		if (end == mem_node_config[mnode].physmax)
144			mem_node_config[mnode].physmax = start - 1;
145	} else {
146
147		/*
148		 * Let the common lgrp framework know the mnode is
149		 * leaving
150		 */
151		lgrp_config(LGRP_CONFIG_MEM_DEL, mnode,
152		    MEM_NODE_2_LGRPHAND(mnode));
153
154		/*
155		 * Delete the whole node.
156		 */
157		ASSERT(MNODE_PGCNT(mnode) == 0);
158		do {
159			omask = memnodes_mask;
160			nmask = omask & ~(1ull << mnode);
161		} while (cas64(&memnodes_mask, omask, nmask) != omask);
162		atomic_add_16(&num_memnodes, -1);
163		mem_node_config[mnode].exists = 0;
164	}
165}
166
167void
168mem_node_add_range(pfn_t start, pfn_t end)
169{
170	if (&plat_slice_add != NULL)
171		plat_slice_add(start, end);
172	else
173		mem_node_add_slice(start, end);
174}
175
176void
177mem_node_del_range(pfn_t start, pfn_t end)
178{
179	if (&plat_slice_del != NULL)
180		plat_slice_del(start, end);
181	else
182		mem_node_del_slice(start, end);
183}
184
185void
186startup_build_mem_nodes(prom_memlist_t *list, size_t nelems)
187{
188	size_t	elem;
189	pfn_t	basepfn;
190	pgcnt_t	npgs;
191
192	/* LINTED: ASSERT will always true or false */
193	ASSERT(NBBY * sizeof (mnodeset_t) >= max_mem_nodes);
194
195	if (&plat_build_mem_nodes != NULL) {
196		plat_build_mem_nodes(list, nelems);
197	} else {
198		/*
199		 * Boot install lists are arranged <addr, len>, ...
200		 */
201		for (elem = 0; elem < nelems; list++, elem++) {
202			basepfn = btop(list->addr);
203			npgs = btop(list->size);
204			mem_node_add_range(basepfn, basepfn + npgs - 1);
205		}
206	}
207}
208
209/*
210 * Allocate an unassigned memnode.
211 */
212int
213mem_node_alloc()
214{
215	int mnode;
216	mnodeset_t newmask, oldmask;
217
218	/*
219	 * Find an unused memnode.  Update it atomically to prevent
220	 * a first time memnode creation race.
221	 */
222	for (mnode = 0; mnode < max_mem_nodes; mnode++)
223		if (cas32((uint32_t *)&mem_node_config[mnode].exists,
224		    0, 1) == 0)
225			break;
226
227	if (mnode >= max_mem_nodes)
228			panic("Out of free memnodes\n");
229
230	mem_node_config[mnode].physbase = (uint64_t)-1;
231	mem_node_config[mnode].physmax = 0;
232	atomic_add_16(&num_memnodes, 1);
233	do {
234		oldmask = memnodes_mask;
235		newmask = memnodes_mask | (1ull << mnode);
236	} while (cas64(&memnodes_mask, oldmask, newmask) != oldmask);
237
238	return (mnode);
239}
240
241/*
242 * Find the intersection between a memnode and a memlist
243 * and returns the number of pages that overlap.
244 *
245 * Grab the memlist lock to protect the list from DR operations.
246 */
247pgcnt_t
248mem_node_memlist_pages(int mnode, struct memlist *mlist)
249{
250	pfn_t		base, end;
251	pfn_t		cur_base, cur_end;
252	pgcnt_t		npgs = 0;
253	pgcnt_t		pages;
254	struct memlist	*pmem;
255
256	if (&plat_mem_node_intersect_range != NULL) {
257		memlist_read_lock();
258
259		for (pmem = mlist; pmem; pmem = pmem->next) {
260			plat_mem_node_intersect_range(btop(pmem->address),
261			    btop(pmem->size), mnode, &pages);
262			npgs += pages;
263		}
264
265		memlist_read_unlock();
266		return (npgs);
267	}
268
269	base = mem_node_config[mnode].physbase;
270	end = mem_node_config[mnode].physmax;
271
272	memlist_read_lock();
273
274	for (pmem = mlist; pmem; pmem = pmem->next) {
275		cur_base = btop(pmem->address);
276		cur_end = cur_base + btop(pmem->size) - 1;
277		if (end < cur_base || base > cur_end)
278			continue;
279		npgs = npgs + (MIN(cur_end, end) -
280		    MAX(cur_base, base)) + 1;
281	}
282
283	memlist_read_unlock();
284
285	return (npgs);
286}
287
288/*
289 * Find MIN(physbase) and MAX(physmax) over all mnodes
290 *
291 * Called during startup and DR to find hpm_counters limits when
292 * interleaved_mnodes is set.
293 * NOTE: there is a race condition with DR if it tries to change more than
294 * one mnode in parallel. Sizing shared hpm_counters depends on finding the
295 * min(physbase) and max(physmax) across all mnodes. Therefore, the caller of
296 * page_ctrs_adjust must ensure that mem_node_config does not change while it
297 * is running.
298 */
299void
300mem_node_max_range(pfn_t *basep, pfn_t *maxp)
301{
302	int mnode;
303	pfn_t max = 0;
304	pfn_t base = (pfn_t)-1;
305
306	for (mnode = 0; mnode < max_mem_nodes; mnode++) {
307		if (mem_node_config[mnode].exists == 0)
308			continue;
309		if (max < mem_node_config[mnode].physmax)
310			max = mem_node_config[mnode].physmax;
311		if (base > mem_node_config[mnode].physbase)
312			base = mem_node_config[mnode].physbase;
313	}
314	ASSERT(base != (pfn_t)-1 && max != 0);
315	*basep = base;
316	*maxp = max;
317}
318