Makefile revision 3138:7bbdcbfa4cd5 
1#
2# CDDL HEADER START
3#
4# The contents of this file are subject to the terms of the
5# Common Development and Distribution License (the "License").
6# You may not use this file except in compliance with the License.
7#
8# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9# or http://www.opensolaris.org/os/licensing.
10# See the License for the specific language governing permissions
11# and limitations under the License.
12#
13# When distributing Covered Code, include this CDDL HEADER in each
14# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15# If applicable, add the following below this CDDL HEADER, with the
16# fields enclosed by brackets "[]" replaced with your own identifying
17# information: Portions Copyright [yyyy] [name of copyright owner]
18#
19# CDDL HEADER END
20#
21#
22# Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
23# Use is subject to license terms.
24#
25# uts/sparc/scsa2usb/Makefile
26#
27#	This makefile drives the production of the scsa2usb driver
28#	kernel module. sparc architecture dependent
29#
30
31#ident	"%Z%%M%	%I%	%E% SMI"
32
33#
34#	Path to the base of the uts directory tree (usually /usr/src/uts).
35#
36UTSBASE = ../..
37
38#
39#	Define the module and object file sets.
40#
41MODULE		= scsa2usb
42OBJECTS		= $(SCSA2USB_OBJS:%=$(OBJS_DIR)/%)
43LINTS		= $(SCSA2USB_OBJS:%.o=$(LINTS_DIR)/%.ln)
44ROOTMODULE	= $(ROOT_DRV_DIR)/$(MODULE)
45CONF_SRCDIR	= $(UTSBASE)/common/io/usb/scsa2usb
46WARLOCK_OUT	= $(SCSA2USB_OBJS:%.o=%.ll)
47WARLOCK_OK	= $(MODULE).ok
48WLCMD_DIR       = $(UTSBASE)/common/io/warlock
49
50#
51#	Include common rules.
52#
53include $(UTSBASE)/sparc/Makefile.sparc
54
55# 
56# lint pass one enforcement 
57# 
58CFLAGS += $(CCVERBOSE)
59
60# depends on misc/usba misc/scsi
61#
62LDFLAGS		+= -dy -Nmisc/usba -Nmisc/scsi
63
64#
65#	Define targets
66#
67ALL_TARGET	= $(BINARY) $(SRC_CONFILE)
68LINT_TARGET	= $(MODULE).lint
69INSTALL_TARGET	= $(BINARY) $(ROOTMODULE) $(ROOT_CONFFILE)
70
71#
72# For now, disable these lint checks; maintainers should endeavor
73# to investigate and remove these for maximum lint coverage.
74# Please do not carry these forward to new Makefiles.
75#
76LINTTAGS	+= -erroff=E_BAD_PTR_CAST_ALIGN
77LINTTAGS	+= -erroff=E_PTRDIFF_OVERFLOW
78LINTTAGS	+= -erroff=E_ASSIGN_NARROW_CONV
79LINTTAGS	+= -erroff=E_STATIC_UNUSED
80LINTTAGS	+= -erroff=E_SUSPICIOUS_COMPARISON
81
82.KEEP_STATE:
83
84all:		$(ALL_DEPS)
85
86def:		$(DEF_DEPS)
87
88clean:		$(CLEAN_DEPS)
89		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
90
91clobber:	$(CLOBBER_DEPS)
92		$(RM) $(WARLOCK_OUT) $(WARLOCK_OK)
93
94lint:		$(LINT_DEPS)
95
96modlintlib:	$(MODLINTLIB_DEPS)
97
98clean.lint:	$(CLEAN_LINT_DEPS)
99
100install:	$(INSTALL_DEPS)
101
102#
103#	Include common targets.
104#
105include $(UTSBASE)/sparc/Makefile.targ
106
107#
108#	Defines for local commands.
109#
110WARLOCK		= warlock
111WLCC		= wlcc
112TOUCH		= touch
113SCCS		= sccs
114TEST		= test
115
116#
117#	lock_lint rules
118#
119USBA_FILES = $(USBA_OBJS:%.o=../usba/%.ll)
120UHCI_FILES = $(UHCI_OBJS:%.o=../uhci/%.ll)
121OHCI_FILES = $(OHCI_OBJS:%.o=../ohci/%.ll)
122EHCI_FILES = $(EHCI_OBJS:%.o=../ehci/%.ll)
123SD_FILES   = $(SD_OBJS:%.o=../sd/%.ll)
124ST_FILES   = $(ST_OBJS:%.o=../st/%.ll)
125SCSI_FILES = $(SCSI_OBJS:%.o= -l ../scsi/%.ll)
126
127warlock: $(WARLOCK_OK) warlock_with_usba
128
129%.wlcmd:
130	cd $(WLCMD_DIR); $(TEST) -f $@  || $(SCCS) get $@
131
132$(WARLOCK_OK): $(WARLOCK_OUT) scsa2usb.wlcmd warlock_ddi.files \
133	scsi.files
134	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb.wlcmd $(WARLOCK_OUT)  \
135		../warlock/scsi.ll \
136		-l ../warlock/ddi_dki_impl.ll \
137		$(SCSI_FILES)
138	$(TOUCH) $@
139
140%.ll: $(UTSBASE)/common/io/usb/scsa2usb/%.c \
141		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_bulkonly.h \
142		$(UTSBASE)/common/sys/usb/clients/mass_storage/usb_cbi.h \
143		$(UTSBASE)/common/sys/usb/scsa2usb/scsa2usb.h
144	$(WLCC)  $(CPPFLAGS) -DDEBUG -o $@ $<
145
146warlock_with_usba: scsa2usb_with_usba.wlcmd  $(WARLOCK_OUT) usba_files \
147	ohci_files ehci_files uhci_files warlock_ddi.files sd.files st.files \
148	scsi.files
149	$(WARLOCK) -c $(WLCMD_DIR)/scsa2usb_with_usba.wlcmd \
150		$(USBA_FILES) $(OHCI_FILES) $(EHCI_FILES) $(UHCI_FILES) \
151		$(SD_FILES) \
152		$(ST_FILES) \
153		$(SCSI_FILES) \
154		$(WARLOCK_OUT) \
155		-l ../warlock/ddi_dki_impl.ll
156
157usba_files:
158	@cd ../usba;pwd; $(MAKE) warlock
159
160uhci_files:
161	@cd ../uhci;pwd; $(MAKE) warlock
162
163ohci_files:
164	@cd ../ohci;pwd; $(MAKE) warlock
165
166ehci_files:
167	@cd ../ehci;pwd; $(MAKE) warlock
168
169warlock_ddi.files:
170	@cd ../warlock; pwd; $(MAKE) warlock
171
172scsi.files:
173	@cd ../scsi; pwd; $(MAKE) warlock
174
175sd.files:
176	@cd ../sd; pwd; $(MAKE) warlock_alone
177
178st.files:
179	@cd ../st; pwd; $(MAKE) warlock_alone
180