uppc.c revision 3472:089cf1ebaa85
1/*
2 * CDDL HEADER START
3 *
4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
7 *
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
12 *
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
18 *
19 * CDDL HEADER END
20 */
21/*
22 * Copyright 2007 Sun Microsystems, Inc.  All rights reserved.
23 * Use is subject to license terms.
24 */
25
26#pragma ident	"%Z%%M%	%I%	%E% SMI"
27
28#define	PSMI_1_5
29
30#include <sys/mutex.h>
31#include <sys/types.h>
32#include <sys/time.h>
33#include <sys/machlock.h>
34#include <sys/smp_impldefs.h>
35#include <sys/uadmin.h>
36#include <sys/promif.h>
37#include <sys/psm.h>
38#include <sys/pit.h>
39#include <sys/psm_common.h>
40#include <sys/atomic.h>
41#include <sys/archsystm.h>
42
43#define	NSEC_IN_SEC		1000000000
44
45/*
46 * Local Function Prototypes
47 */
48static void uppc_softinit(void);
49static void uppc_picinit();
50static int uppc_clkinit(int);
51static int uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl);
52static int uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl);
53static processorid_t uppc_get_next_processorid(processorid_t cpu_id);
54static int uppc_get_clockirq(int ipl);
55static int uppc_probe(void);
56static int uppc_translate_irq(dev_info_t *dip, int irqno);
57static void uppc_shutdown(int cmd, int fcn);
58static void uppc_preshutdown(int cmd, int fcn);
59static int uppc_init_acpi(void);
60static void uppc_setspl(int);
61static int uppc_intr_enter(int, int *);
62static void uppc_intr_exit(int, int);
63static hrtime_t uppc_gethrtime();
64
65static int uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
66    int *pci_irqp, iflag_t *intr_flagp);
67
68/*
69 * Global Data
70 */
71static struct standard_pic pics0;
72int uppc_use_acpi = 1;	/* Use ACPI by default */
73int uppc_enable_acpi = 0;
74
75
76/*
77 * For interrupt link devices, if uppc_unconditional_srs is set, an irq resource
78 * will be assigned (via _SRS). If it is not set, use the current
79 * irq setting (via _CRS), but only if that irq is in the set of possible
80 * irqs (returned by _PRS) for the device.
81 */
82int uppc_unconditional_srs = 1;
83
84/*
85 * For interrupt link devices, if uppc_prefer_crs is set when we are
86 * assigning an IRQ resource to a device, prefer the current IRQ setting
87 * over other possible irq settings under same conditions.
88 */
89int uppc_prefer_crs = 1;
90
91int uppc_verbose = 0;
92
93/* flag definitions for uppc_verbose */
94#define	UPPC_VERBOSE_IRQ_FLAG			0x00000001
95#define	UPPC_VERBOSE_POWEROFF_FLAG		0x00000002
96#define	UPPC_VERBOSE_POWEROFF_PAUSE_FLAG	0x00000004
97
98
99#define	UPPC_VERBOSE_IRQ(fmt) \
100	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG) \
101		cmn_err fmt;
102
103#define	UPPC_VERBOSE_POWEROFF(fmt) \
104	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG) \
105		prom_printf fmt;
106
107uchar_t uppc_reserved_irqlist[MAX_ISA_IRQ + 1];
108
109static uint16_t uppc_irq_shared_table[MAX_ISA_IRQ + 1];
110
111/*
112 * Contains SCI irqno from FADT after initialization
113 */
114static int uppc_sci = -1;
115
116/*
117 * Local Static Data
118 */
119
120static lock_t uppc_gethrtime_lock;
121static hrtime_t uppc_lasthrtime;
122
123
124#ifdef UPPC_DEBUG
125#define	DENT	0x0001
126
127static int	uppc_debug = 0;
128
129
130#endif
131
132
133static struct	psm_ops uppc_ops = {
134	uppc_probe,				/* psm_probe		*/
135
136	uppc_softinit,				/* psm_init		*/
137	uppc_picinit,				/* psm_picinit		*/
138	uppc_intr_enter,			/* psm_intr_enter	*/
139	uppc_intr_exit,				/* psm_intr_exit	*/
140	uppc_setspl,				/* psm_setspl		*/
141	uppc_addspl,				/* psm_addspl		*/
142	uppc_delspl,				/* psm_delspl		*/
143	(int (*)(processorid_t))NULL,		/* psm_disable_intr	*/
144	(void (*)(processorid_t))NULL,		/* psm_enable_intr	*/
145	(int (*)(int))NULL,			/* psm_softlvl_to_irq	*/
146	(void (*)(int))NULL,			/* psm_set_softintr	*/
147	(void (*)(processorid_t))NULL,		/* psm_set_idlecpu	*/
148	(void (*)(processorid_t))NULL,		/* psm_unset_idlecpu	*/
149
150	uppc_clkinit,				/* psm_clkinit		*/
151	uppc_get_clockirq,			/* psm_get_clockirq	*/
152	(void (*)(void))NULL,			/* psm_hrtimeinit	*/
153	uppc_gethrtime,				/* psm_gethrtime	*/
154
155	uppc_get_next_processorid,		/* psm_get_next_processorid */
156	(int (*)(processorid_t, caddr_t))NULL,	/* psm_cpu_start	*/
157	(int (*)(void))NULL,			/* psm_post_cpu_start	*/
158	uppc_shutdown,				/* psm_shutdown		*/
159	(int (*)(int, int))NULL,		/* psm_get_ipivect	*/
160	(void (*)(processorid_t, int))NULL,	/* psm_send_ipi		*/
161
162	uppc_translate_irq,			/* psm_translate_irq	*/
163
164	(void (*)(int, char *))NULL,		/* psm_notify_error	*/
165	(void (*)(int msg))NULL,		/* psm_notify_func	*/
166	(void (*)(hrtime_t time))NULL,		/* psm_timer_reprogram	*/
167	(void (*)(void))NULL,			/* psm_timer_enable	*/
168	(void (*)(void))NULL,			/* psm_timer_disable	*/
169	(void (*)(void *arg))NULL,		/* psm_post_cyclic_setup */
170	uppc_preshutdown,			/* psm_preshutdown	*/
171
172	(int (*)(dev_info_t *, ddi_intr_handle_impl_t *,
173	    psm_intr_op_t, int *))NULL		/* psm_intr_ops		*/
174};
175
176
177static struct	psm_info uppc_info = {
178	PSM_INFO_VER01_5,	/* version				*/
179	PSM_OWN_SYS_DEFAULT,	/* ownership				*/
180	(struct psm_ops *)&uppc_ops, /* operation			*/
181	"uppc",			/* machine name				*/
182	"UniProcessor PC",	/* machine descriptions			*/
183};
184
185/*
186 * Configuration Data
187 */
188
189/*
190 * This is the loadable module wrapper.
191 */
192#include <sys/modctl.h>
193
194static void *uppc_hdlp;
195
196int
197_init(void)
198{
199	return (psm_mod_init(&uppc_hdlp, &uppc_info));
200}
201
202int
203_fini(void)
204{
205	return (psm_mod_fini(&uppc_hdlp, &uppc_info));
206}
207
208int
209_info(struct modinfo *modinfop)
210{
211	return (psm_mod_info(&uppc_hdlp, &uppc_info, modinfop));
212}
213
214/*
215 * Autoconfiguration Routines
216 */
217
218static int
219uppc_probe(void)
220{
221
222
223	return (PSM_SUCCESS);
224}
225
226static void
227uppc_softinit(void)
228{
229	struct standard_pic *pp;
230	int i;
231
232	pp = &pics0;
233
234
235	if (uppc_use_acpi && uppc_init_acpi()) {
236		build_reserved_irqlist((uchar_t *)uppc_reserved_irqlist);
237		for (i = 0; i <= MAX_ISA_IRQ; i++)
238			uppc_irq_shared_table[i] = 0;
239		uppc_enable_acpi = 1;
240	}
241
242	/*
243	 * initialize the ipl mask
244	 */
245	for (i = 0; i < (MAXIPL << 1); i += 2) {
246		/* enable slave lines on master */
247		pp->c_iplmask[i] = 0xff;
248		pp->c_iplmask[i+1] = (0xff & ~(1 << MASTERLINE));
249	}
250}
251
252/*ARGSUSED*/
253static int
254uppc_clkinit(int hertz)
255{
256	ulong_t clkticks = PIT_HZ / hz;
257
258	if (hertz == 0)
259		return (0);	/* One shot mode not supported */
260
261	/*
262	 * program timer 0
263	 */
264	outb(PITCTL_PORT, (PIT_C0|PIT_NDIVMODE|PIT_READMODE));
265	outb(PITCTR0_PORT, (uchar_t)clkticks);
266	outb(PITCTR0_PORT, (uchar_t)(clkticks>>8));
267
268	return (NSEC_IN_SEC / hertz);
269}
270
271static void
272uppc_picinit()
273{
274	picsetup();
275
276	/*
277	 * If a valid SCI is present, manually addspl()
278	 * since we're not set-up early enough in boot
279	 * to do it "conventionally" (via add_avintr)
280	 */
281	if (uppc_sci >= 0)
282		(void) uppc_addspl(uppc_sci, SCI_IPL, SCI_IPL, SCI_IPL);
283}
284
285/*ARGSUSED3*/
286static int
287uppc_addspl(int irqno, int ipl, int min_ipl, int max_ipl)
288{
289	struct standard_pic *pp;
290	int i;
291	int startidx;
292	uchar_t	vectmask;
293
294	if (irqno <= MAX_ISA_IRQ)
295		atomic_add_16(&uppc_irq_shared_table[irqno], 1);
296
297	if (ipl != min_ipl)
298		return (0);
299
300	if (irqno > 7) {
301		vectmask = 1 << (irqno - 8);
302		startidx = (ipl << 1);
303	} else {
304		vectmask = 1 << irqno;
305		startidx = (ipl << 1) + 1;
306	}
307
308	/*
309	 * mask intr same or above ipl
310	 * level MAXIPL has all intr off as init. default
311	 */
312	pp = &pics0;
313	for (i = startidx; i < (MAXIPL << 1); i += 2) {
314		if (pp->c_iplmask[i] & vectmask)
315			break;
316		pp->c_iplmask[i] |= vectmask;
317	}
318
319	/*
320	 * unmask intr below ipl
321	 */
322	for (i = startidx-2; i >= 0; i -= 2) {
323		if (!(pp->c_iplmask[i] & vectmask))
324			break;
325		pp->c_iplmask[i] &= ~vectmask;
326	}
327	return (0);
328}
329
330static int
331uppc_delspl(int irqno, int ipl, int min_ipl, int max_ipl)
332{
333	struct standard_pic *pp;
334	int i;
335	uchar_t	vectmask;
336
337	if (irqno <= MAX_ISA_IRQ)
338		atomic_add_16(&uppc_irq_shared_table[irqno], -1);
339
340	/*
341	 * skip if we are not deleting the last handler
342	 * and the ipl is higher than minimum
343	 */
344	if ((max_ipl != PSM_INVALID_IPL) && (ipl >= min_ipl))
345		return (0);
346
347	if (irqno > 7) {
348		vectmask = 1 << (irqno - 8);
349		i = 0;
350	} else {
351		vectmask = 1 << irqno;
352		i = 1;
353	}
354
355	pp = &pics0;
356
357	/*
358	 * check any handlers left for this irqno
359	 */
360	if (max_ipl != PSM_INVALID_IPL) {
361		/*
362		 * unmasks all levels below the lowest priority
363		 */
364		i += ((min_ipl - 1) << 1);
365		for (; i >= 0; i -= 2) {
366			if (!(pp->c_iplmask[i] & vectmask))
367				break;
368			pp->c_iplmask[i] &= ~vectmask;
369		}
370	} else {
371		/*
372		 * set mask to all levels
373		 */
374		for (; i < (MAXIPL << 1); i += 2) {
375			if (pp->c_iplmask[i] & vectmask)
376				break;
377			pp->c_iplmask[i] |= vectmask;
378		}
379	}
380	return (0);
381}
382
383static processorid_t
384uppc_get_next_processorid(processorid_t cpu_id)
385{
386	if (cpu_id == -1)
387		return (0);
388	return (-1);
389}
390
391/*ARGSUSED*/
392static int
393uppc_get_clockirq(int ipl)
394{
395	return (CLOCK_VECTOR);
396}
397
398
399static int
400uppc_init_acpi(void)
401{
402	int verboseflags = 0;
403	int	sci;
404	iflag_t sci_flags;
405
406	/*
407	 * Process SCI configuration here; this may return
408	 * an error if acpi-user-options has specified
409	 * legacy mode (use ACPI without ACPI mode or SCI)
410	 */
411	if (acpica_get_sci(&sci, &sci_flags) != AE_OK)
412		sci = -1;
413
414	/*
415	 * Initialize sub-system - if error is returns, ACPI is not
416	 * used.
417	 */
418	if (acpica_init() != AE_OK)
419		return (0);
420
421	/*
422	 * uppc implies system is in PIC mode; set edge/level
423	 * via ELCR based on return value from get_sci; this
424	 * will default to level/low if no override present,
425	 * as recommended by Intel ACPI CA team.
426	 */
427	if (sci >= 0) {
428		ASSERT((sci_flags.intr_el == INTR_EL_LEVEL) ||
429		    (sci_flags.intr_el == INTR_EL_EDGE));
430
431		psm_set_elcr(sci, sci_flags.intr_el == INTR_EL_LEVEL);
432	}
433
434	/*
435	 * Remember SCI for later use
436	 */
437	uppc_sci = sci;
438
439	if (uppc_verbose & UPPC_VERBOSE_IRQ_FLAG)
440		verboseflags |= PSM_VERBOSE_IRQ_FLAG;
441
442	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_FLAG)
443		verboseflags |= PSM_VERBOSE_POWEROFF_FLAG;
444
445	if (uppc_verbose & UPPC_VERBOSE_POWEROFF_PAUSE_FLAG)
446		verboseflags |= PSM_VERBOSE_POWEROFF_PAUSE_FLAG;
447
448	if (acpi_psm_init(uppc_info.p_mach_idstring, verboseflags) ==
449	    ACPI_PSM_FAILURE) {
450		return (0);
451	}
452
453	return (1);
454}
455
456
457static void
458uppc_preshutdown(int cmd, int fcn)
459{
460	UPPC_VERBOSE_POWEROFF(("uppc_preshutdown(%d,%d);\n", cmd, fcn));
461
462}
463
464static void
465uppc_shutdown(int cmd, int fcn)
466{
467	UPPC_VERBOSE_POWEROFF(("uppc_shutdown(%d,%d);\n", cmd, fcn));
468
469	/*
470	 * Return if passed a command other than A_SHUTDOWN or
471	 * if we're not using ACPI.
472	 */
473	if ((cmd != A_SHUTDOWN) || (!uppc_enable_acpi))
474		return;
475
476	/* switch system back into Legacy Mode */
477	(void) AcpiDisable();
478
479	if (fcn != AD_POWEROFF)
480		return;
481
482	(void) acpi_poweroff();
483}
484
485static int
486uppc_acpi_translate_pci_irq(dev_info_t *dip, int busid, int devid,
487    int ipin, int *pci_irqp, iflag_t *intr_flagp)
488{
489	int status;
490	acpi_psm_lnk_t acpipsmlnk;
491
492	if ((status = acpi_get_irq_cache_ent(busid, devid, ipin, pci_irqp,
493	    intr_flagp)) == ACPI_PSM_SUCCESS) {
494		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Found irqno %d "
495		    "from cache for device %s, instance #%d\n", *pci_irqp,
496		    ddi_get_name(dip), ddi_get_instance(dip)));
497		return (status);
498	}
499
500	bzero(&acpipsmlnk, sizeof (acpi_psm_lnk_t));
501
502	if ((status = acpi_translate_pci_irq(dip, ipin, pci_irqp,
503	    intr_flagp, &acpipsmlnk)) == ACPI_PSM_FAILURE) {
504		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: "
505		    " acpi_translate_pci_irq failed for device %s, instance"
506		    " #%d\n", ddi_get_name(dip), ddi_get_instance(dip)));
507
508		return (status);
509	}
510
511	if (status == ACPI_PSM_PARTIAL && acpipsmlnk.lnkobj != NULL) {
512		status = uppc_acpi_irq_configure(&acpipsmlnk, dip, pci_irqp,
513		    intr_flagp);
514		if (status != ACPI_PSM_SUCCESS) {
515			status = acpi_get_current_irq_resource(&acpipsmlnk,
516			    pci_irqp, intr_flagp);
517		}
518	}
519
520	if (status == ACPI_PSM_SUCCESS) {
521		acpi_new_irq_cache_ent(busid, devid, ipin, *pci_irqp,
522		    intr_flagp, &acpipsmlnk);
523		psm_set_elcr(*pci_irqp, 1); 	/* set IRQ to PCI mode */
524
525		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] "
526		    "new irq %d for device %s, instance #%d\n",
527		    *pci_irqp, ddi_get_name(dip), ddi_get_instance(dip)));
528	}
529
530	return (status);
531}
532
533/*
534 * Configures the irq for the interrupt link device identified by
535 * acpipsmlnkp.
536 *
537 * Gets the current and the list of possible irq settings for the
538 * device. If uppc_unconditional_srs is not set, and the current
539 * resource setting is in the list of possible irq settings,
540 * current irq resource setting is passed to the caller.
541 *
542 * Otherwise, picks an irq number from the list of possible irq
543 * settings, and sets the irq of the device to this value.
544 * If prefer_crs is set, among a set of irq numbers in the list that have
545 * the least number of devices sharing the interrupt, we pick current irq
546 * resource setting if it is a member of this set.
547 *
548 * Passes the irq number in the value pointed to by pci_irqp, and
549 * polarity and sensitivity in the structure pointed to by dipintrflagp
550 * to the caller.
551 *
552 * Note that if setting the irq resource failed, but successfuly obtained
553 * the current irq resource settings, passes the current irq resources
554 * and considers it a success.
555 *
556 * Returns:
557 * ACPI_PSM_SUCCESS on success.
558 *
559 * ACPI_PSM_FAILURE if an error occured during the configuration or
560 * if a suitable irq was not found for this device, or if setting the
561 * irq resource and obtaining the current resource fails.
562 *
563 */
564static int
565uppc_acpi_irq_configure(acpi_psm_lnk_t *acpipsmlnkp, dev_info_t *dip,
566    int *pci_irqp, iflag_t *dipintr_flagp)
567{
568	int i, min_share, foundnow, done = 0;
569	int32_t irq;
570	int32_t share_irq = -1;
571	int32_t chosen_irq = -1;
572	int cur_irq = -1;
573	acpi_irqlist_t *irqlistp;
574	acpi_irqlist_t *irqlistent;
575
576	if ((acpi_get_possible_irq_resources(acpipsmlnkp, &irqlistp))
577	    == ACPI_PSM_FAILURE) {
578		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Unable to determine "
579		    "or assign IRQ for device %s, instance #%d: The system was "
580		    "unable to get the list of potential IRQs from ACPI.",
581		    ddi_get_name(dip), ddi_get_instance(dip)));
582
583		return (ACPI_PSM_FAILURE);
584	}
585
586	if ((acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
587	    dipintr_flagp) == ACPI_PSM_SUCCESS) && (!uppc_unconditional_srs) &&
588	    (cur_irq > 0)) {
589
590		if (acpi_irqlist_find_irq(irqlistp, cur_irq, NULL)
591		    == ACPI_PSM_SUCCESS) {
592
593			acpi_free_irqlist(irqlistp);
594			ASSERT(pci_irqp != NULL);
595			*pci_irqp = cur_irq;
596			return (ACPI_PSM_SUCCESS);
597		}
598		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: Could not find the "
599		    "current irq %d for device %s, instance #%d in ACPI's "
600		    "list of possible irqs for this device. Picking one from "
601		    " the latter list.", cur_irq, ddi_get_name(dip),
602		    ddi_get_instance(dip)));
603
604	}
605
606	irqlistent = irqlistp;
607	min_share = 255;
608
609	while (irqlistent != NULL) {
610
611		for (foundnow = 0, i = 0; i < irqlistent->num_irqs; i++) {
612
613			irq = irqlistp->irqs[i];
614
615			if ((irq > MAX_ISA_IRQ) ||
616			    (irqlistent->intr_flags.intr_el == INTR_EL_EDGE) ||
617			    (irq == 0))
618				continue;
619
620			if (uppc_reserved_irqlist[irq])
621				continue;
622
623			if (uppc_irq_shared_table[irq] == 0) {
624				chosen_irq = irq;
625				foundnow = 1;
626				if (!(uppc_prefer_crs) || (irq == cur_irq)) {
627					done = 1;
628					break;
629				}
630			}
631
632			if ((uppc_irq_shared_table[irq] < min_share) ||
633			    ((uppc_irq_shared_table[irq] == min_share) &&
634			    (cur_irq == irq) && (uppc_prefer_crs))) {
635				min_share = uppc_irq_shared_table[irq];
636				share_irq = irq;
637				foundnow = 1;
638			}
639		}
640
641		/* If we found an IRQ in the inner loop, save the details */
642		if (foundnow && ((chosen_irq != -1) || (share_irq != -1))) {
643			/*
644			 * Copy the acpi_prs_private_t and flags from this
645			 * irq list entry, since we found an irq from this
646			 * entry.
647			 */
648			acpipsmlnkp->acpi_prs_prv = irqlistent->acpi_prs_prv;
649			*dipintr_flagp = irqlistent->intr_flags;
650		}
651
652		if (done)
653			break;
654
655		/* Load the next entry in the irqlist */
656		irqlistent = irqlistent->next;
657	}
658
659	acpi_free_irqlist(irqlistp);
660
661	if (chosen_irq != -1)
662		irq = chosen_irq;
663	else if (share_irq != -1)
664		irq = share_irq;
665	else {
666		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Could not find a "
667		    "suitable irq from the list of possible irqs for device "
668		    "%s, instance #%d in ACPI's list of possible\n",
669		    ddi_get_name(dip), ddi_get_instance(dip)));
670
671		return (ACPI_PSM_FAILURE);
672	}
673
674
675	UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: Setting irq %d for device %s "
676	    "instance #%d\n", irq, ddi_get_name(dip), ddi_get_instance(dip)));
677
678	if ((acpi_set_irq_resource(acpipsmlnkp, irq)) == ACPI_PSM_SUCCESS) {
679		/*
680		 * setting irq was successful, check to make sure CRS
681		 * reflects that. If CRS does not agree with what we
682		 * set, return the irq that was set.
683		 */
684
685		if (acpi_get_current_irq_resource(acpipsmlnkp, &cur_irq,
686		    dipintr_flagp) == ACPI_PSM_SUCCESS) {
687
688			if (cur_irq != irq)
689				UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: "
690				    "IRQ resource set (irqno %d) for device %s "
691				    "instance #%d, differs from current "
692				    "setting irqno %d",
693				    irq, ddi_get_name(dip),
694				    ddi_get_instance(dip), cur_irq));
695		}
696		/*
697		 * return the irq that was set, and not what CRS reports,
698		 * since CRS has been seen to be bogus on some systems
699		 */
700		cur_irq = irq;
701	} else {
702		UPPC_VERBOSE_IRQ((CE_WARN, "!uppc: set resource irq %d "
703		    "failed for device %s instance #%d",
704		    irq, ddi_get_name(dip), ddi_get_instance(dip)));
705		if (cur_irq == -1)
706			return (ACPI_PSM_FAILURE);
707	}
708
709	ASSERT(pci_irqp != NULL);
710	*pci_irqp = cur_irq;
711	return (ACPI_PSM_SUCCESS);
712}
713
714
715/*ARGSUSED*/
716static int
717uppc_translate_irq(dev_info_t *dip, int irqno)
718{
719	char dev_type[16];
720	int dev_len, pci_irq, devid, busid;
721	ddi_acc_handle_t cfg_handle;
722	uchar_t ipin, iline;
723	iflag_t intr_flag;
724
725	if (dip == NULL) {
726		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno = %d"
727		    " dip = NULL\n", irqno));
728		return (irqno);
729	}
730
731	if (!uppc_enable_acpi) {
732		return (irqno);
733	}
734
735	dev_len = sizeof (dev_type);
736	if (ddi_getlongprop_buf(DDI_DEV_T_ANY, ddi_get_parent(dip),
737	    DDI_PROP_DONTPASS, "device_type", (caddr_t)dev_type,
738	    &dev_len) != DDI_PROP_SUCCESS) {
739		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: irqno %d"
740		    "device %s instance %d no device_type\n", irqno,
741		    ddi_get_name(dip), ddi_get_instance(dip)));
742		return (irqno);
743	}
744
745	if ((strcmp(dev_type, "pci") == 0) ||
746	    (strcmp(dev_type, "pciex") == 0)) {
747
748		/* pci device */
749		if (acpica_get_bdf(dip, &busid, &devid, NULL) != 0)
750			return (irqno);
751
752		if (pci_config_setup(dip, &cfg_handle) != DDI_SUCCESS)
753			return (irqno);
754
755		ipin = pci_config_get8(cfg_handle, PCI_CONF_IPIN) - PCI_INTA;
756		iline = pci_config_get8(cfg_handle, PCI_CONF_ILINE);
757		if (uppc_acpi_translate_pci_irq(dip, busid, devid,
758		    ipin, &pci_irq, &intr_flag) == ACPI_PSM_SUCCESS) {
759
760			UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: [ACPI] new irq "
761			    "%d old irq %d device %s, instance %d\n", pci_irq,
762			    irqno, ddi_get_name(dip), ddi_get_instance(dip)));
763
764			/*
765			 * Make sure pci_irq is within range.
766			 * Otherwise, fall through and return irqno.
767			 */
768			if (pci_irq <= MAX_ISA_IRQ) {
769				if (iline != pci_irq) {
770					/*
771					 * Update the device's ILINE byte,
772					 * in case uppc_acpi_translate_pci_irq
773					 * has choosen a different pci_irq
774					 * than the BIOS has configured.
775					 * Some chipsets use the value in
776					 * ILINE to control interrupt routing,
777					 * in conflict with the PCI spec.
778					 */
779					pci_config_put8(cfg_handle,
780					    PCI_CONF_ILINE, pci_irq);
781				}
782				pci_config_teardown(&cfg_handle);
783				return (pci_irq);
784			}
785		}
786		pci_config_teardown(&cfg_handle);
787
788		/* FALLTHRU to common case - returning irqno */
789	} else {
790		/* non-PCI; assumes ISA-style edge-triggered */
791		psm_set_elcr(irqno, 0); 	/* set IRQ to ISA mode */
792
793		UPPC_VERBOSE_IRQ((CE_CONT, "!uppc: non-pci,"
794		    "irqno %d device %s instance %d\n", irqno,
795		    ddi_get_name(dip), ddi_get_instance(dip)));
796	}
797
798	return (irqno);
799}
800
801/*
802 * uppc_intr_enter() raises the ipl to the level of the current interrupt,
803 * and sends EOI to the pics.
804 * If interrupt is 7 or 15 and not spurious interrupt, send specific EOI
805 * else send non-specific EOI
806 * uppc_intr_enter() returns the new priority level,
807 * or -1 for spurious interrupt
808 */
809static int
810uppc_intr_enter(int ipl, int *vector)
811{
812	int newipl;
813	int intno;
814
815	intno = (*vector);
816
817	ASSERT(intno < 256);
818
819	newipl = autovect[intno].avh_hi_pri;
820
821	/*
822	 * During wait_till_seen() periods when interrupt vector is being
823	 * removed in remove_av(), the removed hardware interrupt could
824	 * trigger and got here with newipl 0.  It has to send EOI
825	 * as usual but no need to call setspl and returns -1 like spurious.
826	 */
827	if ((intno & 7) != 7) {
828		if (newipl)
829			uppc_setspl(newipl);
830		outb(MCMD_PORT, PIC_NSEOI);
831		if (intno >= 8) {
832			outb(SCMD_PORT, PIC_NSEOI);
833		}
834	} else { /* int was 7 or 15 */
835		if (newipl && newipl <= ipl) { /* Check for spurious int */
836			if (intno != 7)
837				outb(MCMD_PORT, PIC_NSEOI);
838			return (-1); /* Spurious int */
839		} else {
840			if (newipl)
841				uppc_setspl(newipl);
842			if (intno != 7) {
843				outb(MCMD_PORT, PIC_NSEOI);
844				outb(SCMD_PORT, PIC_SEOI_LVL7);
845			} else  {
846				outb(MCMD_PORT, PIC_SEOI_LVL7);
847			}
848		}
849	}
850
851	if (newipl)
852		return (newipl);
853	else
854		return (-1); /* not real spurious int */
855}
856
857/*
858 * uppc_intr_exit() restores the old interrupt
859 * priority level after processing an interrupt.
860 * It is called with interrupts disabled, and does not enable interrupts.
861 */
862/* ARGSUSED */
863static void
864uppc_intr_exit(int ipl, int vector)
865{
866	uppc_setspl(ipl);
867}
868
869/*
870 * uppc_setspl() loads new interrupt masks into the pics
871 * based on input ipl.
872 */
873/* ARGSUSED */
874static void
875uppc_setspl(int ipl)
876{
877	struct standard_pic *pp;
878	uint8_t smask, mmask;
879	uint8_t cursmask, curmmask;
880
881	pp = &pics0;
882	smask = pp->c_iplmask[ipl * 2];
883	mmask = pp->c_iplmask[ipl * 2 + 1];
884	cursmask = pp->c_curmask[0];
885	curmmask = pp->c_curmask[1];
886	if (cursmask == smask && curmmask == mmask)
887		return;
888	pp->c_curmask[0] = smask;
889	pp->c_curmask[1] = mmask;
890
891	if (cursmask != smask) {
892		/*
893		 * program new slave pic mask
894		 */
895		outb(SIMR_PORT, smask);
896	}
897	if (curmmask != mmask) {
898		/*
899		 * program new master pic mask
900		 */
901		outb(MIMR_PORT, mmask);
902	}
903	/*
904	 * read master to allow pics to settle
905	 */
906	(void) inb(MIMR_PORT);
907}
908
909/*
910 * uppc_gethrtime() returns high resolution timer value
911 */
912static hrtime_t
913uppc_gethrtime()
914{
915	hrtime_t timeval, temp;
916	unsigned int ctr0;
917	ulong_t oflags;
918
919	oflags = intr_clear(); /* disable ints */
920	lock_set(&uppc_gethrtime_lock);
921retry:
922	temp = hrtime_base;
923	outb(PITCTL_PORT, 0);	/* latch counter 0 */
924	/*
925	 * read counter 0
926	 */
927	ctr0 = inb(PITCTR0_PORT);
928	ctr0 |= inb(PITCTR0_PORT) << 8;
929	timeval = (hrtime_t)ctr0 * (NANOSEC / PIT_HZ);
930	if (temp != hrtime_base)
931		goto retry;
932	timeval -= temp;
933	if (timeval < uppc_lasthrtime)
934		timeval = uppc_lasthrtime;
935	uppc_lasthrtime = timeval;
936	lock_clear(&uppc_gethrtime_lock);
937	intr_restore(oflags);
938	return (timeval);
939}
940