hermon_mr.h revision 9517:b4839b0aa7a4
1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22/* 23 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 24 * Use is subject to license terms. 25 */ 26 27#ifndef _SYS_IB_ADAPTERS_HERMON_MR_H 28#define _SYS_IB_ADAPTERS_HERMON_MR_H 29 30/* 31 * hermon_mr.h 32 * Contains all of the prototypes, #defines, and structures necessary 33 * for the Hermon Memory Region/Window routines. 34 * Specifically it contains #defines, macros, and prototypes for each of 35 * the required memory region/window verbs that can be accessed through 36 * the IBTF's CI interfaces. In particular each of the prototypes defined 37 * below is called from a corresponding CI interface routine (as specified 38 * in the hermon_ci.c file). 39 */ 40 41#include <sys/types.h> 42#include <sys/conf.h> 43#include <sys/ddi.h> 44#include <sys/sunddi.h> 45 46#ifdef __cplusplus 47extern "C" { 48#endif 49 50/* 51 * The following defines specify the default number of MPT entries to 52 * configure. This value is controllable through the "hermon_log_num_mpt" 53 * configuration variable. 54 */ 55#define HERMON_NUM_DMPT_SHIFT 0x16 56 57/* 58 * The following defines specify the default number of MPT entries to 59 * configure. This value is controllable through the "hermon_log_num_mtt" 60 * configuration variable. This default value expects an averages of 8 61 * MTTs per MPT. We also define a log MTT size, since it's not likely 62 * to change. 63 */ 64#define HERMON_NUM_MTT_SHIFT 0x1a 65#define HERMON_MTT_SIZE_SHIFT 0x3 66 67/* 68 * This define is the maximum size of a memory region or window (log 2), which 69 * is used to initialize the "hermon_log_max_mrw_sz" configuration variable. 70 */ 71#define HERMON_MAX_MEM_MPT_SHIFT 0x24 72 73/* 74 * Defines used by hermon_mr_deregister() to specify how much/to what extent 75 * a given memory regions resources should be freed up. HERMON_MR_DEREG_ALL 76 * says what it means, free up all the resources associated with the region. 77 * HERMON_MR_DEREG_NO_HW2SW_MPT indicates that it is unnecessary to attempt 78 * the ownership transfer (from hardware to software) for the given MPT entry. 79 * And HERMON_MR_DEREG_NO_HW2SW_MPT_OR_UNBIND indicates that it is not only 80 * unnecessary to attempt the ownership transfer for MPT, but it is also 81 * unnecessary to attempt to unbind the memory. 82 * In general, these last two are specified when hermon_mr_deregister() is 83 * called from hermon_mr_reregister(), where the MPT ownership transfer or 84 * memory unbinding may have already been successfully performed. 85 */ 86#define HERMON_MR_DEREG_ALL 3 87#define HERMON_MR_DEREG_NO_HW2SW_MPT 2 88#define HERMON_MR_DEREG_NO_HW2SW_MPT_OR_UNBIND 1 89 90/* 91 * The following define is used by hermon_mr_rereg_xlat_helper() to determine 92 * whether or not a given DMA handle can be reused. If the DMA handle was 93 * previously initialized for IOMMU bypass mapping, then it can not be reused 94 * to reregister a region for DDI_DMA_STREAMING access. 95 */ 96#define HERMON_MR_REUSE_DMAHDL(mr, flags) \ 97 (((mr)->mr_bindinfo.bi_bypass != HERMON_BINDMEM_BYPASS) || \ 98 !((flags) & IBT_MR_NONCOHERENT)) 99 100/* 101 * The hermon_sw_refcnt_t structure is used internally by the Hermon driver to 102 * track all the information necessary to manage shared memory regions. Since 103 * a shared memory region _will_ have its own distinct MPT entry, but will 104 * _share_ its MTT entries with another region, it is necessary to track the 105 * number of times a given MTT structure is shared. This ensures that it will 106 * not be prematurely freed up and that can be destroyed only when it is 107 * appropriate to do so. 108 * 109 * Each hermon_sw_refcnt_t structure contains a lock and a reference count 110 * variable which are used to track the necessary information. 111 * 112 * The following macros (below) are used to manipulate and query the MTT 113 * reference count parameters. HERMON_MTT_REFCNT_INIT() is used to initialize 114 * a newly allocated hermon_sw_refcnt_t struct (setting the "swrc_refcnt" to 1). 115 * And the HERMON_MTT_IS_NOT_SHARED() and HERMON_MTT_IS_SHARED() macros are 116 * used to query the current status of hermon_sw_refcnt_t struct to determine 117 * if its "swrc_refcnt" is one or not. 118 */ 119typedef struct hermon_sw_refcnt_s { 120 kmutex_t swrc_lock; 121 uint_t swrc_refcnt; 122} hermon_sw_refcnt_t; 123_NOTE(DATA_READABLE_WITHOUT_LOCK(hermon_sw_refcnt_t::swrc_refcnt)) 124_NOTE(MUTEX_PROTECTS_DATA(hermon_sw_refcnt_t::swrc_lock, 125 hermon_sw_refcnt_t::swrc_refcnt)) 126#define HERMON_MTT_REFCNT_INIT(swrc_tmp) ((swrc_tmp)->swrc_refcnt = 1) 127#define HERMON_MTT_IS_NOT_SHARED(swrc_tmp) ((swrc_tmp)->swrc_refcnt == 1) 128#define HERMON_MTT_IS_SHARED(swrc_tmp) ((swrc_tmp)->swrc_refcnt != 1) 129 130 131/* 132 * The hermon_bind_info_t structure is used internally by the Hermon driver to 133 * track all the information necessary to perform the DMA mappings necessary 134 * for memory registration. It is specifically passed into both the 135 * hermon_mr_mem_bind() and hermon_mr_mtt_write() functions which perform most 136 * of the necessary operations for Hermon memory registration. 137 * 138 * This structure is used to pass all the information necessary for a call 139 * to either ddi_dma_addr_bind_handle() or ddi_dma_buf_bind_handle(). Note: 140 * the fields which need to be valid for each type of binding are slightly 141 * different and that it indicated by the value in the "bi_type" field. The 142 * "bi_type" field may be set to either of the following defined values: 143 * HERMON_BINDHDL_VADDR (to indicate an "addr" bind) or HERMON_BINDHDL_BUF (to 144 * indicate a "buf" bind). 145 * 146 * Upon return from hermon_mr_mem_bind(), the hermon_bind_info_t struct will 147 * have its "bi_dmahdl", "bi_dmacookie", and "bi_cookiecnt" fields filled in. 148 * It is these values which are of particular interest to the 149 * hermon_mr_mtt_write() routine (they hold the PCI mapped addresses). 150 * 151 * Once initialized and used in this way, the hermon_bind_info_t will not to be 152 * modified in anyway until it is subsequently passed to hermon_mr_mem_unbind() 153 * where the memory and resources will be unbound and reclaimed. Note: the 154 * "bi_free_dmahdl" flag indicated whether the ddi_dma_handle_t should be 155 * freed as part of the hermon_mr_mem_unbind() operation or whether it will 156 * be freed later elsewhere. 157 */ 158typedef struct hermon_bind_info_s { 159 uint64_t bi_addr; 160 uint64_t bi_len; 161 struct as *bi_as; 162 struct buf *bi_buf; 163 ddi_dma_handle_t bi_dmahdl; 164 ddi_dma_cookie_t bi_dmacookie; 165 uint_t bi_cookiecnt; 166 uint_t bi_type; 167 uint_t bi_flags; 168 uint_t bi_bypass; 169 uint_t bi_free_dmahdl; 170} hermon_bind_info_t; 171#define HERMON_BINDHDL_NONE 0 172#define HERMON_BINDHDL_VADDR 1 173#define HERMON_BINDHDL_BUF 2 174#define HERMON_BINDHDL_UBUF 3 175 176/* 177 * The hermon_sw_mr_s structure is also referred to using the "hermon_mrhdl_t" 178 * typedef (see hermon_typedef.h). It encodes all the information necessary 179 * to track the various resources needed to register, reregister, deregister, 180 * and perform all the myriad other operations on both memory regions _and_ 181 * memory windows. 182 * 183 * A pointer to this structure is returned from many of the IBTF's CI verbs 184 * interfaces for memory registration. 185 * 186 * It contains pointers to the various resources allocated for a memory 187 * region, i.e. MPT resource, MTT resource, and MTT reference count resource. 188 * In addition it contains the hermon_bind_info_t struct used for the memory 189 * bind operation on a given memory region. 190 * 191 * It also has a pointers to the associated PD handle, placeholders for access 192 * flags, memory keys, and suggested page size for the region. It also has 193 * the necessary backpointer to the resource that corresponds to the structure 194 * itself. And lastly, it contains a placeholder for a callback which should 195 * be called on memory region unpinning. 196 */ 197struct hermon_sw_mr_s { 198 kmutex_t mr_lock; 199 hermon_rsrc_t *mr_mptrsrcp; 200 hermon_rsrc_t *mr_mttrsrcp; 201 hermon_rsrc_t *mr_mttrefcntp; 202 hermon_pdhdl_t mr_pdhdl; 203 hermon_bind_info_t mr_bindinfo; 204 ibt_mr_attr_flags_t mr_accflag; 205 uint32_t mr_lkey; 206 uint32_t mr_rkey; 207 uint32_t mr_logmttpgsz; 208 hermon_mpt_rsrc_type_t mr_mpt_type; 209 uint64_t mr_mttaddr; /* for cMPTs */ 210 uint64_t mr_log2_pgsz; 211 /* entity_size (in bytes), for cMPTS */ 212 hermon_rsrc_t *mr_rsrcp; 213 uint_t mr_is_fmr; 214 hermon_fmr_list_t *mr_fmr; 215 uint_t mr_is_umem; 216 ddi_umem_cookie_t mr_umemcookie; 217 void (*mr_umem_cbfunc)(void *, void *); 218 void *mr_umem_cbarg1; 219 void *mr_umem_cbarg2; 220}; 221_NOTE(DATA_READABLE_WITHOUT_LOCK(hermon_sw_mr_s::mr_bindinfo 222 hermon_sw_mr_s::mr_lkey 223 hermon_sw_mr_s::mr_is_umem 224 hermon_sw_mr_s::mr_is_fmr 225 hermon_sw_mr_s::mr_fmr)) 226_NOTE(MUTEX_PROTECTS_DATA(hermon_sw_mr_s::mr_lock, 227 hermon_sw_mr_s::mr_mptrsrcp 228 hermon_sw_mr_s::mr_mttrsrcp 229 hermon_sw_mr_s::mr_mttrefcntp 230 hermon_sw_mr_s::mr_bindinfo 231 hermon_sw_mr_s::mr_lkey 232 hermon_sw_mr_s::mr_rkey 233 hermon_sw_mr_s::mr_logmttpgsz 234 hermon_sw_mr_s::mr_rsrcp 235 hermon_sw_mr_s::mr_is_umem 236 hermon_sw_mr_s::mr_umemcookie 237 hermon_sw_mr_s::mr_umem_cbfunc 238 hermon_sw_mr_s::mr_umem_cbarg1 239 hermon_sw_mr_s::mr_umem_cbarg2)) 240 241/* 242 * The hermon_mr_options_t structure is used in several of the Hermon memory 243 * registration routines to provide additional option functionality. When 244 * a NULL pointer is passed in place of a pointer to this struct, it is a 245 * way of specifying the "default" behavior. Using this structure, however, 246 * is a way of controlling any extended behavior. 247 * 248 * Currently, the only defined "extended" behaviors are for specifying whether 249 * a given memory region should bypass the PCI IOMMU (HERMON_BINDMEM_BYPASS) 250 * or be mapped into the IOMMU (HERMON_BINDMEM_NORMAL), for specifying whether 251 * a given ddi_dma_handle_t should be used in the bind operation, and for 252 * specifying whether a memory registration should attempt to return an IB 253 * vaddr which is "zero-based" (aids in alignment contraints for QPs). 254 * 255 * This defaults today to always bypassing the IOMMU (can be changed by using 256 * the "hermon_iommu_bypass" configuration variable), to always allocating 257 * a new dma handle, and to using the virtual address passed in (i.e. not 258 * "zero-based"). 259 */ 260typedef struct hermon_mr_options_s { 261 ddi_dma_handle_t mro_bind_dmahdl; 262 uint_t mro_bind_type; 263 uint_t mro_bind_override_addr; 264} hermon_mr_options_t; 265#define HERMON_BINDMEM_NORMAL 1 266#define HERMON_BINDMEM_BYPASS 0 267 268#define HERMON_NO_MPT_OWNERSHIP 0 /* for cMPTs */ 269#define HERMON_PASS_MPT_OWNERSHIP 1 270 271/* 272 * Memory Allocation/Deallocation 273 * 274 * Although this is not strictly related to "memory regions", this is 275 * the most logical place to define the struct used for the memory 276 * allocation/deallocation CI entry points. 277 * 278 * ibc_mem_alloc_s structure is used to store DMA handles for 279 * for these allocations. 280 */ 281struct ibc_mem_alloc_s { 282 ddi_dma_handle_t ibc_dma_hdl; 283 ddi_acc_handle_t ibc_acc_hdl; 284}; 285_NOTE(SCHEME_PROTECTS_DATA("safe sharing", 286 ibc_mem_alloc_s::ibc_dma_hdl 287 ibc_mem_alloc_s::ibc_acc_hdl)) 288 289int hermon_mr_register(hermon_state_t *state, hermon_pdhdl_t pdhdl, 290 ibt_mr_attr_t *attr_p, hermon_mrhdl_t *mrhdl, hermon_mr_options_t *op, 291 hermon_mpt_rsrc_type_t mpt_type); 292int hermon_mr_register_buf(hermon_state_t *state, hermon_pdhdl_t pdhdl, 293 ibt_smr_attr_t *attrp, struct buf *buf, hermon_mrhdl_t *mrhdl, 294 hermon_mr_options_t *op, hermon_mpt_rsrc_type_t mpt_type); 295int hermon_mr_mtt_bind(hermon_state_t *state, hermon_bind_info_t *bind, 296 ddi_dma_handle_t bind_dmahdl, hermon_rsrc_t **mtt, uint_t *mtt_pgsz_bits, 297 uint_t is_buffer); 298int hermon_mr_mtt_unbind(hermon_state_t *state, hermon_bind_info_t *bind, 299 hermon_rsrc_t *mtt); 300int hermon_mr_register_shared(hermon_state_t *state, hermon_mrhdl_t mrhdl, 301 hermon_pdhdl_t pdhdl, ibt_smr_attr_t *attr_p, hermon_mrhdl_t *mrhdl_new); 302int hermon_mr_deregister(hermon_state_t *state, hermon_mrhdl_t *mrhdl, 303 uint_t level, uint_t sleep); 304int hermon_mr_query(hermon_state_t *state, hermon_mrhdl_t mrhdl, 305 ibt_mr_query_attr_t *attr); 306int hermon_mr_reregister(hermon_state_t *state, hermon_mrhdl_t mrhdl, 307 hermon_pdhdl_t pdhdl, ibt_mr_attr_t *attr_p, hermon_mrhdl_t *mrhdl_new, 308 hermon_mr_options_t *op); 309int hermon_mr_reregister_buf(hermon_state_t *state, hermon_mrhdl_t mr, 310 hermon_pdhdl_t pd, ibt_smr_attr_t *mr_attr, struct buf *buf, 311 hermon_mrhdl_t *mrhdl_new, hermon_mr_options_t *op); 312int hermon_mr_sync(hermon_state_t *state, ibt_mr_sync_t *mr_segs, 313 size_t num_segs); 314int hermon_mw_alloc(hermon_state_t *state, hermon_pdhdl_t pdhdl, 315 ibt_mw_flags_t flags, hermon_mwhdl_t *mwhdl); 316int hermon_mw_free(hermon_state_t *state, hermon_mwhdl_t *mwhdl, uint_t sleep); 317uint32_t hermon_mr_keycalc(uint32_t indx); 318uint32_t hermon_mr_key_swap(uint32_t indx); 319uint32_t hermon_index_to_mkey(uint32_t indx); 320int hermon_mr_alloc_fmr(hermon_state_t *state, hermon_pdhdl_t pd, 321 hermon_fmrhdl_t fmr_pool, hermon_mrhdl_t *mrhdl); 322int hermon_mr_dealloc_fmr(hermon_state_t *state, hermon_mrhdl_t *mrhdl); 323int hermon_mr_register_physical_fmr(hermon_state_t *state, 324 ibt_pmr_attr_t *mem_pattr_p, hermon_mrhdl_t mr, ibt_pmr_desc_t *mem_desc_p); 325int hermon_mr_invalidate_fmr(hermon_state_t *state, hermon_mrhdl_t mr); 326int hermon_mr_deregister_fmr(hermon_state_t *state, hermon_mrhdl_t mr); 327 328 329#ifdef __cplusplus 330} 331#endif 332 333#endif /* _SYS_IB_ADAPTERS_HERMON_MR_H */ 334