ac97_alc.c revision 9484:fbd5ddc28e96
1/* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21/* 22 * Copyright 2009 Sun Microsystems, Inc. All rights reserved. 23 * Use is subject to license terms. 24 */ 25 26/* 27 * ALC (Realtek/Advance Logic) codec extensions. 28 */ 29 30#include <sys/types.h> 31#include <sys/ddi.h> 32#include <sys/sunddi.h> 33#include <sys/audio/audio_driver.h> 34#include <sys/audio/ac97.h> 35#include <sys/note.h> 36#include "ac97_impl.h" 37 38#define ALC_DATA_FLOW_CTRL_REGISTER 0x6a 39#define ADFC_SPDIFIN_EN 0x8000 40#define ADFC_SPDIFIN_MON_EN 0x4000 41#define ADFC_SPDIF_OUT_MASK 0x3000 42#define ADFC_SPDIF_OUT_ACLINK 0x0000 43#define ADFC_SPDIF_OUT_ADC 0x1000 44#define ADFC_SPDIF_OUT_BYPASS 0x2000 45#define ADFC_PCM_SPDIFIN 0x0800 46#define ADFC_BACK_SURROUND 0x0400 /* ALC850 only */ 47#define ADFC_CENTER_LFE 0x0400 /* ALC650 series */ 48#define ADFC_MIC 0x0000 49#define ADFC_SURROUND 0x0200 50#define ADFC_LINEIN 0x0000 51#define ADFC_FRONT_MIC_MONO_OUT 0x0100 /* ALC850 */ 52#define ADFC_ANALOG_INPUT_PASS_CLFE 0x0020 53#define ADFC_ANALOG_INPUT_PASS_SURROUND 0x0010 54#define ADFC_SURROUND_MIRROR 0x0001 55 56#define ALC_SURROUND_DAC_REGISTER 0x64 57#define ASD_SURROUND_MUTE 0x8000 58#define ASD_SURR_LEFT_VOL 0x1f00 59#define ASD_SURR_RIGHT_VOL 0x001f 60 61#define ALC_CEN_LFE_DAC_REGISTER 0x66 62#define ACLD_CEN_LFE_MUTE 0x8000 63#define ACLD_LFE_VOL 0x1f00 64#define ACLD_CEN_VOL 0x001f 65 66#define ALC_MISC_CTRL_REGISTER 0x7a 67#define AMC_XTLSEL 0x8000 68#define AMC_VREFOUT_DIS 0x1000 69#define AMC_INDEP_MUTE_CTRL 0x0800 70#define AMC_JD2_SURR_CEN_LFE 0x0008 71#define AMC_JD1_SURR_CEN_LFE 0x0004 72#define AMC_PIN47_SPDIF 0x0002 73#define AMC_PIN47_EAPD 0x0000 74#define AMC_JD0_SURR_CEN_LFE 0x0001 75 76static void 77alc650_set_linein_func(ac97_ctrl_t *actrl, uint64_t value) 78{ 79 ac97_t *ac = actrl->actrl_ac97; 80 81 ac97_wr(ac, AC97_INTERRUPT_PAGING_REGISTER, 0); /* select page 0 */ 82 if (value & 2) { 83 ac97_set(ac, ALC_DATA_FLOW_CTRL_REGISTER, ADFC_SURROUND); 84 } else { 85 ac97_clr(ac, ALC_DATA_FLOW_CTRL_REGISTER, ADFC_SURROUND); 86 } 87} 88 89static void 90alc650_set_mic_func(ac97_ctrl_t *actrl, uint64_t value) 91{ 92 ac97_t *ac = actrl->actrl_ac97; 93 94 ac97_wr(ac, AC97_INTERRUPT_PAGING_REGISTER, 0); /* select page 0 */ 95 if (value & 2) { 96 ac97_set(ac, ALC_MISC_CTRL_REGISTER, AMC_VREFOUT_DIS); 97 ac97_set(ac, ALC_DATA_FLOW_CTRL_REGISTER, ADFC_CENTER_LFE); 98 } else { 99 ac97_clr(ac, ALC_MISC_CTRL_REGISTER, AMC_VREFOUT_DIS); 100 ac97_clr(ac, ALC_DATA_FLOW_CTRL_REGISTER, ADFC_CENTER_LFE); 101 } 102} 103 104#if 0 105static void 106alc850_set_auxin_func(ac97_ctrl_t *actrl, uint64_t value) 107{ 108 ac97_t *ac = actrl->actrl_ac97; 109 110 ac97_wr(ac, AC97_INTERRUPT_PAGING_REGISTER, 0); /* select page 0 */ 111 if (value & 2) { 112 ac97_set(ac, ALC_DATA_FLOW_CTRL_REGISTER, ADFC_BACK_SURROUND); 113 } else { 114 ac97_clr(ac, ALC_DATA_FLOW_CTRL_REGISTER, ADFC_BACK_SURROUND); 115 } 116} 117#endif 118 119static void 120alc650_set_pcm(ac97_ctrl_t *actrl, uint64_t value) 121{ 122 ac97_t *ac = actrl->actrl_ac97; 123 uint16_t adj_value; 124 uint16_t mute; 125 uint8_t vol; 126 127 /* limit input values to 16 bits and split to right and left */ 128 vol = value & 0xff; 129 130 /* If this control is mute-able than set as muted if needed */ 131 mute = vol ? 0 : ASD_SURROUND_MUTE; 132 adj_value = ac97_val_scale(vol, vol, 5) | mute; 133 134 /* select page 0 */ 135 ac97_wr(ac, AC97_INTERRUPT_PAGING_REGISTER, 0); 136 /* adjust all three PCM volumes */ 137 ac97_wr(ac, AC97_PCM_OUT_VOLUME_REGISTER, adj_value); 138 ac97_wr(ac, ALC_SURROUND_DAC_REGISTER, adj_value); 139 ac97_wr(ac, ALC_CEN_LFE_DAC_REGISTER, adj_value); 140} 141 142static const char *alc_linein_funcs[] = { 143 AUDIO_PORT_LINEIN, 144 AUDIO_PORT_SURROUND, 145 NULL 146}; 147 148static const char *alc_mic_funcs[] = { 149 AUDIO_PORT_MIC, 150 AUDIO_PORT_CENLFE, 151 NULL 152}; 153 154static ac97_ctrl_probe_t alc650_linein_func_cpt = { 155 AUDIO_CTRL_ID_JACK1, 1, 3, 3, AUDIO_CTRL_TYPE_ENUM, AC97_FLAGS, 156 0, alc650_set_linein_func, NULL, 0, alc_linein_funcs 157}; 158static ac97_ctrl_probe_t alc650_mic_func_cpt = { 159 AUDIO_CTRL_ID_JACK2, 1, 3, 3, AUDIO_CTRL_TYPE_ENUM, AC97_FLAGS, 160 0, alc650_set_mic_func, NULL, 0, alc_mic_funcs 161}; 162 163static void 164alc_pcm_override(ac97_t *ac) 165{ 166 ac97_ctrl_t *ctrl; 167 168 /* override master PCM volume function */ 169 ctrl = ac97_control_find(ac, AUDIO_CTRL_ID_VOLUME); 170 if (ctrl != NULL) { 171 ctrl->actrl_write_fn = alc650_set_pcm; 172 } 173} 174 175void 176alc650_init(ac97_t *ac) 177{ 178 ac97_ctrl_probe_t cp; 179 int ival; 180 181 bcopy(&alc650_linein_func_cpt, &cp, sizeof (cp)); 182 ival = ac97_get_prop(ac, AC97_PROP_LINEIN_FUNC, 0); 183 if ((ival >= 1) && (ival <= 2)) { 184 cp.cp_initval = ival; 185 } 186 ac97_alloc_control(ac, &cp); 187 188 bcopy(&alc650_mic_func_cpt, &cp, sizeof (cp)); 189 ival = ac97_get_prop(ac, AC97_PROP_MIC_FUNC, 0); 190 if ((ival >= 1) && (ival <= 2)) { 191 cp.cp_initval = ival; 192 } 193 ac97_alloc_control(ac, &cp); 194 195 alc_pcm_override(ac); 196} 197 198void 199alc850_init(ac97_t *ac) 200{ 201 /* 202 * NB: We could probably enable 7.1 here using the AUXIN source, 203 * but there are a few details still missing from the data sheet. 204 * (Such as, how is volume from the back-surround DAC managed?, 205 * and what SDATA slots are the back surround delivered on?) 206 * 207 * Also, the AC'97 controllers themselves don't necessarily support 208 * 7.1, so we'd have to figure out how to coordinate detection 209 * with the controller. 5.1 should be good enough for now. 210 * 211 * Unlike other products, ALC850 has separate pins for 5.1 data, 212 * so jack retasking isn't needed. However, it can retask 213 * some jacks, but we don't have full details for that right 214 * now. We've not seen it on any systems (yet) where this was 215 * necessary, though. 216 */ 217 218 alc_pcm_override(ac); 219} 220