stubGenerator_sparc.cpp revision 1472:c18cbe5936b8
1/* 2 * Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25#include "incls/_precompiled.incl" 26#include "incls/_stubGenerator_sparc.cpp.incl" 27 28// Declaration and definition of StubGenerator (no .hpp file). 29// For a more detailed description of the stub routine structure 30// see the comment in stubRoutines.hpp. 31 32#define __ _masm-> 33 34#ifdef PRODUCT 35#define BLOCK_COMMENT(str) /* nothing */ 36#else 37#define BLOCK_COMMENT(str) __ block_comment(str) 38#endif 39 40#define BIND(label) bind(label); BLOCK_COMMENT(#label ":") 41 42// Note: The register L7 is used as L7_thread_cache, and may not be used 43// any other way within this module. 44 45 46static const Register& Lstub_temp = L2; 47 48// ------------------------------------------------------------------------------------------------------------------------- 49// Stub Code definitions 50 51static address handle_unsafe_access() { 52 JavaThread* thread = JavaThread::current(); 53 address pc = thread->saved_exception_pc(); 54 address npc = thread->saved_exception_npc(); 55 // pc is the instruction which we must emulate 56 // doing a no-op is fine: return garbage from the load 57 58 // request an async exception 59 thread->set_pending_unsafe_access_error(); 60 61 // return address of next instruction to execute 62 return npc; 63} 64 65class StubGenerator: public StubCodeGenerator { 66 private: 67 68#ifdef PRODUCT 69#define inc_counter_np(a,b,c) (0) 70#else 71#define inc_counter_np(counter, t1, t2) \ 72 BLOCK_COMMENT("inc_counter " #counter); \ 73 __ inc_counter(&counter, t1, t2); 74#endif 75 76 //---------------------------------------------------------------------------------------------------- 77 // Call stubs are used to call Java from C 78 79 address generate_call_stub(address& return_pc) { 80 StubCodeMark mark(this, "StubRoutines", "call_stub"); 81 address start = __ pc(); 82 83 // Incoming arguments: 84 // 85 // o0 : call wrapper address 86 // o1 : result (address) 87 // o2 : result type 88 // o3 : method 89 // o4 : (interpreter) entry point 90 // o5 : parameters (address) 91 // [sp + 0x5c]: parameter size (in words) 92 // [sp + 0x60]: thread 93 // 94 // +---------------+ <--- sp + 0 95 // | | 96 // . reg save area . 97 // | | 98 // +---------------+ <--- sp + 0x40 99 // | | 100 // . extra 7 slots . 101 // | | 102 // +---------------+ <--- sp + 0x5c 103 // | param. size | 104 // +---------------+ <--- sp + 0x60 105 // | thread | 106 // +---------------+ 107 // | | 108 109 // note: if the link argument position changes, adjust 110 // the code in frame::entry_frame_call_wrapper() 111 112 const Argument link = Argument(0, false); // used only for GC 113 const Argument result = Argument(1, false); 114 const Argument result_type = Argument(2, false); 115 const Argument method = Argument(3, false); 116 const Argument entry_point = Argument(4, false); 117 const Argument parameters = Argument(5, false); 118 const Argument parameter_size = Argument(6, false); 119 const Argument thread = Argument(7, false); 120 121 // setup thread register 122 __ ld_ptr(thread.as_address(), G2_thread); 123 __ reinit_heapbase(); 124 125#ifdef ASSERT 126 // make sure we have no pending exceptions 127 { const Register t = G3_scratch; 128 Label L; 129 __ ld_ptr(G2_thread, in_bytes(Thread::pending_exception_offset()), t); 130 __ br_null(t, false, Assembler::pt, L); 131 __ delayed()->nop(); 132 __ stop("StubRoutines::call_stub: entered with pending exception"); 133 __ bind(L); 134 } 135#endif 136 137 // create activation frame & allocate space for parameters 138 { const Register t = G3_scratch; 139 __ ld_ptr(parameter_size.as_address(), t); // get parameter size (in words) 140 __ add(t, frame::memory_parameter_word_sp_offset, t); // add space for save area (in words) 141 __ round_to(t, WordsPerLong); // make sure it is multiple of 2 (in words) 142 __ sll(t, Interpreter::logStackElementSize, t); // compute number of bytes 143 __ neg(t); // negate so it can be used with save 144 __ save(SP, t, SP); // setup new frame 145 } 146 147 // +---------------+ <--- sp + 0 148 // | | 149 // . reg save area . 150 // | | 151 // +---------------+ <--- sp + 0x40 152 // | | 153 // . extra 7 slots . 154 // | | 155 // +---------------+ <--- sp + 0x5c 156 // | empty slot | (only if parameter size is even) 157 // +---------------+ 158 // | | 159 // . parameters . 160 // | | 161 // +---------------+ <--- fp + 0 162 // | | 163 // . reg save area . 164 // | | 165 // +---------------+ <--- fp + 0x40 166 // | | 167 // . extra 7 slots . 168 // | | 169 // +---------------+ <--- fp + 0x5c 170 // | param. size | 171 // +---------------+ <--- fp + 0x60 172 // | thread | 173 // +---------------+ 174 // | | 175 176 // pass parameters if any 177 BLOCK_COMMENT("pass parameters if any"); 178 { const Register src = parameters.as_in().as_register(); 179 const Register dst = Lentry_args; 180 const Register tmp = G3_scratch; 181 const Register cnt = G4_scratch; 182 183 // test if any parameters & setup of Lentry_args 184 Label exit; 185 __ ld_ptr(parameter_size.as_in().as_address(), cnt); // parameter counter 186 __ add( FP, STACK_BIAS, dst ); 187 __ tst(cnt); 188 __ br(Assembler::zero, false, Assembler::pn, exit); 189 __ delayed()->sub(dst, BytesPerWord, dst); // setup Lentry_args 190 191 // copy parameters if any 192 Label loop; 193 __ BIND(loop); 194 // Store parameter value 195 __ ld_ptr(src, 0, tmp); 196 __ add(src, BytesPerWord, src); 197 __ st_ptr(tmp, dst, 0); 198 __ deccc(cnt); 199 __ br(Assembler::greater, false, Assembler::pt, loop); 200 __ delayed()->sub(dst, Interpreter::stackElementSize, dst); 201 202 // done 203 __ BIND(exit); 204 } 205 206 // setup parameters, method & call Java function 207#ifdef ASSERT 208 // layout_activation_impl checks it's notion of saved SP against 209 // this register, so if this changes update it as well. 210 const Register saved_SP = Lscratch; 211 __ mov(SP, saved_SP); // keep track of SP before call 212#endif 213 214 // setup parameters 215 const Register t = G3_scratch; 216 __ ld_ptr(parameter_size.as_in().as_address(), t); // get parameter size (in words) 217 __ sll(t, Interpreter::logStackElementSize, t); // compute number of bytes 218 __ sub(FP, t, Gargs); // setup parameter pointer 219#ifdef _LP64 220 __ add( Gargs, STACK_BIAS, Gargs ); // Account for LP64 stack bias 221#endif 222 __ mov(SP, O5_savedSP); 223 224 225 // do the call 226 // 227 // the following register must be setup: 228 // 229 // G2_thread 230 // G5_method 231 // Gargs 232 BLOCK_COMMENT("call Java function"); 233 __ jmpl(entry_point.as_in().as_register(), G0, O7); 234 __ delayed()->mov(method.as_in().as_register(), G5_method); // setup method 235 236 BLOCK_COMMENT("call_stub_return_address:"); 237 return_pc = __ pc(); 238 239 // The callee, if it wasn't interpreted, can return with SP changed so 240 // we can no longer assert of change of SP. 241 242 // store result depending on type 243 // (everything that is not T_OBJECT, T_LONG, T_FLOAT, or T_DOUBLE 244 // is treated as T_INT) 245 { const Register addr = result .as_in().as_register(); 246 const Register type = result_type.as_in().as_register(); 247 Label is_long, is_float, is_double, is_object, exit; 248 __ cmp(type, T_OBJECT); __ br(Assembler::equal, false, Assembler::pn, is_object); 249 __ delayed()->cmp(type, T_FLOAT); __ br(Assembler::equal, false, Assembler::pn, is_float); 250 __ delayed()->cmp(type, T_DOUBLE); __ br(Assembler::equal, false, Assembler::pn, is_double); 251 __ delayed()->cmp(type, T_LONG); __ br(Assembler::equal, false, Assembler::pn, is_long); 252 __ delayed()->nop(); 253 254 // store int result 255 __ st(O0, addr, G0); 256 257 __ BIND(exit); 258 __ ret(); 259 __ delayed()->restore(); 260 261 __ BIND(is_object); 262 __ ba(false, exit); 263 __ delayed()->st_ptr(O0, addr, G0); 264 265 __ BIND(is_float); 266 __ ba(false, exit); 267 __ delayed()->stf(FloatRegisterImpl::S, F0, addr, G0); 268 269 __ BIND(is_double); 270 __ ba(false, exit); 271 __ delayed()->stf(FloatRegisterImpl::D, F0, addr, G0); 272 273 __ BIND(is_long); 274#ifdef _LP64 275 __ ba(false, exit); 276 __ delayed()->st_long(O0, addr, G0); // store entire long 277#else 278#if defined(COMPILER2) 279 // All return values are where we want them, except for Longs. C2 returns 280 // longs in G1 in the 32-bit build whereas the interpreter wants them in O0/O1. 281 // Since the interpreter will return longs in G1 and O0/O1 in the 32bit 282 // build we simply always use G1. 283 // Note: I tried to make c2 return longs in O0/O1 and G1 so we wouldn't have to 284 // do this here. Unfortunately if we did a rethrow we'd see an machepilog node 285 // first which would move g1 -> O0/O1 and destroy the exception we were throwing. 286 287 __ ba(false, exit); 288 __ delayed()->stx(G1, addr, G0); // store entire long 289#else 290 __ st(O1, addr, BytesPerInt); 291 __ ba(false, exit); 292 __ delayed()->st(O0, addr, G0); 293#endif /* COMPILER2 */ 294#endif /* _LP64 */ 295 } 296 return start; 297 } 298 299 300 //---------------------------------------------------------------------------------------------------- 301 // Return point for a Java call if there's an exception thrown in Java code. 302 // The exception is caught and transformed into a pending exception stored in 303 // JavaThread that can be tested from within the VM. 304 // 305 // Oexception: exception oop 306 307 address generate_catch_exception() { 308 StubCodeMark mark(this, "StubRoutines", "catch_exception"); 309 310 address start = __ pc(); 311 // verify that thread corresponds 312 __ verify_thread(); 313 314 const Register& temp_reg = Gtemp; 315 Address pending_exception_addr (G2_thread, Thread::pending_exception_offset()); 316 Address exception_file_offset_addr(G2_thread, Thread::exception_file_offset ()); 317 Address exception_line_offset_addr(G2_thread, Thread::exception_line_offset ()); 318 319 // set pending exception 320 __ verify_oop(Oexception); 321 __ st_ptr(Oexception, pending_exception_addr); 322 __ set((intptr_t)__FILE__, temp_reg); 323 __ st_ptr(temp_reg, exception_file_offset_addr); 324 __ set((intptr_t)__LINE__, temp_reg); 325 __ st(temp_reg, exception_line_offset_addr); 326 327 // complete return to VM 328 assert(StubRoutines::_call_stub_return_address != NULL, "must have been generated before"); 329 330 AddressLiteral stub_ret(StubRoutines::_call_stub_return_address); 331 __ jump_to(stub_ret, temp_reg); 332 __ delayed()->nop(); 333 334 return start; 335 } 336 337 338 //---------------------------------------------------------------------------------------------------- 339 // Continuation point for runtime calls returning with a pending exception 340 // The pending exception check happened in the runtime or native call stub 341 // The pending exception in Thread is converted into a Java-level exception 342 // 343 // Contract with Java-level exception handler: O0 = exception 344 // O1 = throwing pc 345 346 address generate_forward_exception() { 347 StubCodeMark mark(this, "StubRoutines", "forward_exception"); 348 address start = __ pc(); 349 350 // Upon entry, O7 has the return address returning into Java 351 // (interpreted or compiled) code; i.e. the return address 352 // becomes the throwing pc. 353 354 const Register& handler_reg = Gtemp; 355 356 Address exception_addr(G2_thread, Thread::pending_exception_offset()); 357 358#ifdef ASSERT 359 // make sure that this code is only executed if there is a pending exception 360 { Label L; 361 __ ld_ptr(exception_addr, Gtemp); 362 __ br_notnull(Gtemp, false, Assembler::pt, L); 363 __ delayed()->nop(); 364 __ stop("StubRoutines::forward exception: no pending exception (1)"); 365 __ bind(L); 366 } 367#endif 368 369 // compute exception handler into handler_reg 370 __ get_thread(); 371 __ ld_ptr(exception_addr, Oexception); 372 __ verify_oop(Oexception); 373 __ save_frame(0); // compensates for compiler weakness 374 __ add(O7->after_save(), frame::pc_return_offset, Lscratch); // save the issuing PC 375 BLOCK_COMMENT("call exception_handler_for_return_address"); 376 __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), G2_thread, Lscratch); 377 __ mov(O0, handler_reg); 378 __ restore(); // compensates for compiler weakness 379 380 __ ld_ptr(exception_addr, Oexception); 381 __ add(O7, frame::pc_return_offset, Oissuing_pc); // save the issuing PC 382 383#ifdef ASSERT 384 // make sure exception is set 385 { Label L; 386 __ br_notnull(Oexception, false, Assembler::pt, L); 387 __ delayed()->nop(); 388 __ stop("StubRoutines::forward exception: no pending exception (2)"); 389 __ bind(L); 390 } 391#endif 392 // jump to exception handler 393 __ jmp(handler_reg, 0); 394 // clear pending exception 395 __ delayed()->st_ptr(G0, exception_addr); 396 397 return start; 398 } 399 400 401 //------------------------------------------------------------------------------------------------------------------------ 402 // Continuation point for throwing of implicit exceptions that are not handled in 403 // the current activation. Fabricates an exception oop and initiates normal 404 // exception dispatching in this frame. Only callee-saved registers are preserved 405 // (through the normal register window / RegisterMap handling). 406 // If the compiler needs all registers to be preserved between the fault 407 // point and the exception handler then it must assume responsibility for that in 408 // AbstractCompiler::continuation_for_implicit_null_exception or 409 // continuation_for_implicit_division_by_zero_exception. All other implicit 410 // exceptions (e.g., NullPointerException or AbstractMethodError on entry) are 411 // either at call sites or otherwise assume that stack unwinding will be initiated, 412 // so caller saved registers were assumed volatile in the compiler. 413 414 // Note that we generate only this stub into a RuntimeStub, because it needs to be 415 // properly traversed and ignored during GC, so we change the meaning of the "__" 416 // macro within this method. 417#undef __ 418#define __ masm-> 419 420 address generate_throw_exception(const char* name, address runtime_entry, bool restore_saved_exception_pc) { 421#ifdef ASSERT 422 int insts_size = VerifyThread ? 1 * K : 600; 423#else 424 int insts_size = VerifyThread ? 1 * K : 256; 425#endif /* ASSERT */ 426 int locs_size = 32; 427 428 CodeBuffer code(name, insts_size, locs_size); 429 MacroAssembler* masm = new MacroAssembler(&code); 430 431 __ verify_thread(); 432 433 // This is an inlined and slightly modified version of call_VM 434 // which has the ability to fetch the return PC out of thread-local storage 435 __ assert_not_delayed(); 436 437 // Note that we always push a frame because on the SPARC 438 // architecture, for all of our implicit exception kinds at call 439 // sites, the implicit exception is taken before the callee frame 440 // is pushed. 441 __ save_frame(0); 442 443 int frame_complete = __ offset(); 444 445 if (restore_saved_exception_pc) { 446 __ ld_ptr(G2_thread, JavaThread::saved_exception_pc_offset(), I7); 447 __ sub(I7, frame::pc_return_offset, I7); 448 } 449 450 // Note that we always have a runtime stub frame on the top of stack by this point 451 Register last_java_sp = SP; 452 // 64-bit last_java_sp is biased! 453 __ set_last_Java_frame(last_java_sp, G0); 454 if (VerifyThread) __ mov(G2_thread, O0); // about to be smashed; pass early 455 __ save_thread(noreg); 456 // do the call 457 BLOCK_COMMENT("call runtime_entry"); 458 __ call(runtime_entry, relocInfo::runtime_call_type); 459 if (!VerifyThread) 460 __ delayed()->mov(G2_thread, O0); // pass thread as first argument 461 else 462 __ delayed()->nop(); // (thread already passed) 463 __ restore_thread(noreg); 464 __ reset_last_Java_frame(); 465 466 // check for pending exceptions. use Gtemp as scratch register. 467#ifdef ASSERT 468 Label L; 469 470 Address exception_addr(G2_thread, Thread::pending_exception_offset()); 471 Register scratch_reg = Gtemp; 472 __ ld_ptr(exception_addr, scratch_reg); 473 __ br_notnull(scratch_reg, false, Assembler::pt, L); 474 __ delayed()->nop(); 475 __ should_not_reach_here(); 476 __ bind(L); 477#endif // ASSERT 478 BLOCK_COMMENT("call forward_exception_entry"); 479 __ call(StubRoutines::forward_exception_entry(), relocInfo::runtime_call_type); 480 // we use O7 linkage so that forward_exception_entry has the issuing PC 481 __ delayed()->restore(); 482 483 RuntimeStub* stub = RuntimeStub::new_runtime_stub(name, &code, frame_complete, masm->total_frame_size_in_bytes(0), NULL, false); 484 return stub->entry_point(); 485 } 486 487#undef __ 488#define __ _masm-> 489 490 491 // Generate a routine that sets all the registers so we 492 // can tell if the stop routine prints them correctly. 493 address generate_test_stop() { 494 StubCodeMark mark(this, "StubRoutines", "test_stop"); 495 address start = __ pc(); 496 497 int i; 498 499 __ save_frame(0); 500 501 static jfloat zero = 0.0, one = 1.0; 502 503 // put addr in L0, then load through L0 to F0 504 __ set((intptr_t)&zero, L0); __ ldf( FloatRegisterImpl::S, L0, 0, F0); 505 __ set((intptr_t)&one, L0); __ ldf( FloatRegisterImpl::S, L0, 0, F1); // 1.0 to F1 506 507 // use add to put 2..18 in F2..F18 508 for ( i = 2; i <= 18; ++i ) { 509 __ fadd( FloatRegisterImpl::S, F1, as_FloatRegister(i-1), as_FloatRegister(i)); 510 } 511 512 // Now put double 2 in F16, double 18 in F18 513 __ ftof( FloatRegisterImpl::S, FloatRegisterImpl::D, F2, F16 ); 514 __ ftof( FloatRegisterImpl::S, FloatRegisterImpl::D, F18, F18 ); 515 516 // use add to put 20..32 in F20..F32 517 for (i = 20; i < 32; i += 2) { 518 __ fadd( FloatRegisterImpl::D, F16, as_FloatRegister(i-2), as_FloatRegister(i)); 519 } 520 521 // put 0..7 in i's, 8..15 in l's, 16..23 in o's, 24..31 in g's 522 for ( i = 0; i < 8; ++i ) { 523 if (i < 6) { 524 __ set( i, as_iRegister(i)); 525 __ set(16 + i, as_oRegister(i)); 526 __ set(24 + i, as_gRegister(i)); 527 } 528 __ set( 8 + i, as_lRegister(i)); 529 } 530 531 __ stop("testing stop"); 532 533 534 __ ret(); 535 __ delayed()->restore(); 536 537 return start; 538 } 539 540 541 address generate_stop_subroutine() { 542 StubCodeMark mark(this, "StubRoutines", "stop_subroutine"); 543 address start = __ pc(); 544 545 __ stop_subroutine(); 546 547 return start; 548 } 549 550 address generate_flush_callers_register_windows() { 551 StubCodeMark mark(this, "StubRoutines", "flush_callers_register_windows"); 552 address start = __ pc(); 553 554 __ flush_windows(); 555 __ retl(false); 556 __ delayed()->add( FP, STACK_BIAS, O0 ); 557 // The returned value must be a stack pointer whose register save area 558 // is flushed, and will stay flushed while the caller executes. 559 560 return start; 561 } 562 563 // Helper functions for v8 atomic operations. 564 // 565 void get_v8_oop_lock_ptr(Register lock_ptr_reg, Register mark_oop_reg, Register scratch_reg) { 566 if (mark_oop_reg == noreg) { 567 address lock_ptr = (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr(); 568 __ set((intptr_t)lock_ptr, lock_ptr_reg); 569 } else { 570 assert(scratch_reg != noreg, "just checking"); 571 address lock_ptr = (address)StubRoutines::Sparc::_v8_oop_lock_cache; 572 __ set((intptr_t)lock_ptr, lock_ptr_reg); 573 __ and3(mark_oop_reg, StubRoutines::Sparc::v8_oop_lock_mask_in_place, scratch_reg); 574 __ add(lock_ptr_reg, scratch_reg, lock_ptr_reg); 575 } 576 } 577 578 void generate_v8_lock_prologue(Register lock_reg, Register lock_ptr_reg, Register yield_reg, Label& retry, Label& dontyield, Register mark_oop_reg = noreg, Register scratch_reg = noreg) { 579 580 get_v8_oop_lock_ptr(lock_ptr_reg, mark_oop_reg, scratch_reg); 581 __ set(StubRoutines::Sparc::locked, lock_reg); 582 // Initialize yield counter 583 __ mov(G0,yield_reg); 584 585 __ BIND(retry); 586 __ cmp(yield_reg, V8AtomicOperationUnderLockSpinCount); 587 __ br(Assembler::less, false, Assembler::pt, dontyield); 588 __ delayed()->nop(); 589 590 // This code can only be called from inside the VM, this 591 // stub is only invoked from Atomic::add(). We do not 592 // want to use call_VM, because _last_java_sp and such 593 // must already be set. 594 // 595 // Save the regs and make space for a C call 596 __ save(SP, -96, SP); 597 __ save_all_globals_into_locals(); 598 BLOCK_COMMENT("call os::naked_sleep"); 599 __ call(CAST_FROM_FN_PTR(address, os::naked_sleep)); 600 __ delayed()->nop(); 601 __ restore_globals_from_locals(); 602 __ restore(); 603 // reset the counter 604 __ mov(G0,yield_reg); 605 606 __ BIND(dontyield); 607 608 // try to get lock 609 __ swap(lock_ptr_reg, 0, lock_reg); 610 611 // did we get the lock? 612 __ cmp(lock_reg, StubRoutines::Sparc::unlocked); 613 __ br(Assembler::notEqual, true, Assembler::pn, retry); 614 __ delayed()->add(yield_reg,1,yield_reg); 615 616 // yes, got lock. do the operation here. 617 } 618 619 void generate_v8_lock_epilogue(Register lock_reg, Register lock_ptr_reg, Register yield_reg, Label& retry, Label& dontyield, Register mark_oop_reg = noreg, Register scratch_reg = noreg) { 620 __ st(lock_reg, lock_ptr_reg, 0); // unlock 621 } 622 623 // Support for jint Atomic::xchg(jint exchange_value, volatile jint* dest). 624 // 625 // Arguments : 626 // 627 // exchange_value: O0 628 // dest: O1 629 // 630 // Results: 631 // 632 // O0: the value previously stored in dest 633 // 634 address generate_atomic_xchg() { 635 StubCodeMark mark(this, "StubRoutines", "atomic_xchg"); 636 address start = __ pc(); 637 638 if (UseCASForSwap) { 639 // Use CAS instead of swap, just in case the MP hardware 640 // prefers to work with just one kind of synch. instruction. 641 Label retry; 642 __ BIND(retry); 643 __ mov(O0, O3); // scratch copy of exchange value 644 __ ld(O1, 0, O2); // observe the previous value 645 // try to replace O2 with O3 646 __ cas_under_lock(O1, O2, O3, 647 (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr(),false); 648 __ cmp(O2, O3); 649 __ br(Assembler::notEqual, false, Assembler::pn, retry); 650 __ delayed()->nop(); 651 652 __ retl(false); 653 __ delayed()->mov(O2, O0); // report previous value to caller 654 655 } else { 656 if (VM_Version::v9_instructions_work()) { 657 __ retl(false); 658 __ delayed()->swap(O1, 0, O0); 659 } else { 660 const Register& lock_reg = O2; 661 const Register& lock_ptr_reg = O3; 662 const Register& yield_reg = O4; 663 664 Label retry; 665 Label dontyield; 666 667 generate_v8_lock_prologue(lock_reg, lock_ptr_reg, yield_reg, retry, dontyield); 668 // got the lock, do the swap 669 __ swap(O1, 0, O0); 670 671 generate_v8_lock_epilogue(lock_reg, lock_ptr_reg, yield_reg, retry, dontyield); 672 __ retl(false); 673 __ delayed()->nop(); 674 } 675 } 676 677 return start; 678 } 679 680 681 // Support for jint Atomic::cmpxchg(jint exchange_value, volatile jint* dest, jint compare_value) 682 // 683 // Arguments : 684 // 685 // exchange_value: O0 686 // dest: O1 687 // compare_value: O2 688 // 689 // Results: 690 // 691 // O0: the value previously stored in dest 692 // 693 // Overwrites (v8): O3,O4,O5 694 // 695 address generate_atomic_cmpxchg() { 696 StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg"); 697 address start = __ pc(); 698 699 // cmpxchg(dest, compare_value, exchange_value) 700 __ cas_under_lock(O1, O2, O0, 701 (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr(),false); 702 __ retl(false); 703 __ delayed()->nop(); 704 705 return start; 706 } 707 708 // Support for jlong Atomic::cmpxchg(jlong exchange_value, volatile jlong *dest, jlong compare_value) 709 // 710 // Arguments : 711 // 712 // exchange_value: O1:O0 713 // dest: O2 714 // compare_value: O4:O3 715 // 716 // Results: 717 // 718 // O1:O0: the value previously stored in dest 719 // 720 // This only works on V9, on V8 we don't generate any 721 // code and just return NULL. 722 // 723 // Overwrites: G1,G2,G3 724 // 725 address generate_atomic_cmpxchg_long() { 726 StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg_long"); 727 address start = __ pc(); 728 729 if (!VM_Version::supports_cx8()) 730 return NULL;; 731 __ sllx(O0, 32, O0); 732 __ srl(O1, 0, O1); 733 __ or3(O0,O1,O0); // O0 holds 64-bit value from compare_value 734 __ sllx(O3, 32, O3); 735 __ srl(O4, 0, O4); 736 __ or3(O3,O4,O3); // O3 holds 64-bit value from exchange_value 737 __ casx(O2, O3, O0); 738 __ srl(O0, 0, O1); // unpacked return value in O1:O0 739 __ retl(false); 740 __ delayed()->srlx(O0, 32, O0); 741 742 return start; 743 } 744 745 746 // Support for jint Atomic::add(jint add_value, volatile jint* dest). 747 // 748 // Arguments : 749 // 750 // add_value: O0 (e.g., +1 or -1) 751 // dest: O1 752 // 753 // Results: 754 // 755 // O0: the new value stored in dest 756 // 757 // Overwrites (v9): O3 758 // Overwrites (v8): O3,O4,O5 759 // 760 address generate_atomic_add() { 761 StubCodeMark mark(this, "StubRoutines", "atomic_add"); 762 address start = __ pc(); 763 __ BIND(_atomic_add_stub); 764 765 if (VM_Version::v9_instructions_work()) { 766 Label(retry); 767 __ BIND(retry); 768 769 __ lduw(O1, 0, O2); 770 __ add(O0, O2, O3); 771 __ cas(O1, O2, O3); 772 __ cmp( O2, O3); 773 __ br(Assembler::notEqual, false, Assembler::pn, retry); 774 __ delayed()->nop(); 775 __ retl(false); 776 __ delayed()->add(O0, O2, O0); // note that cas made O2==O3 777 } else { 778 const Register& lock_reg = O2; 779 const Register& lock_ptr_reg = O3; 780 const Register& value_reg = O4; 781 const Register& yield_reg = O5; 782 783 Label(retry); 784 Label(dontyield); 785 786 generate_v8_lock_prologue(lock_reg, lock_ptr_reg, yield_reg, retry, dontyield); 787 // got lock, do the increment 788 __ ld(O1, 0, value_reg); 789 __ add(O0, value_reg, value_reg); 790 __ st(value_reg, O1, 0); 791 792 // %%% only for RMO and PSO 793 __ membar(Assembler::StoreStore); 794 795 generate_v8_lock_epilogue(lock_reg, lock_ptr_reg, yield_reg, retry, dontyield); 796 797 __ retl(false); 798 __ delayed()->mov(value_reg, O0); 799 } 800 801 return start; 802 } 803 Label _atomic_add_stub; // called from other stubs 804 805 806 //------------------------------------------------------------------------------------------------------------------------ 807 // The following routine generates a subroutine to throw an asynchronous 808 // UnknownError when an unsafe access gets a fault that could not be 809 // reasonably prevented by the programmer. (Example: SIGBUS/OBJERR.) 810 // 811 // Arguments : 812 // 813 // trapping PC: O7 814 // 815 // Results: 816 // posts an asynchronous exception, skips the trapping instruction 817 // 818 819 address generate_handler_for_unsafe_access() { 820 StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access"); 821 address start = __ pc(); 822 823 const int preserve_register_words = (64 * 2); 824 Address preserve_addr(FP, (-preserve_register_words * wordSize) + STACK_BIAS); 825 826 Register Lthread = L7_thread_cache; 827 int i; 828 829 __ save_frame(0); 830 __ mov(G1, L1); 831 __ mov(G2, L2); 832 __ mov(G3, L3); 833 __ mov(G4, L4); 834 __ mov(G5, L5); 835 for (i = 0; i < (VM_Version::v9_instructions_work() ? 64 : 32); i += 2) { 836 __ stf(FloatRegisterImpl::D, as_FloatRegister(i), preserve_addr, i * wordSize); 837 } 838 839 address entry_point = CAST_FROM_FN_PTR(address, handle_unsafe_access); 840 BLOCK_COMMENT("call handle_unsafe_access"); 841 __ call(entry_point, relocInfo::runtime_call_type); 842 __ delayed()->nop(); 843 844 __ mov(L1, G1); 845 __ mov(L2, G2); 846 __ mov(L3, G3); 847 __ mov(L4, G4); 848 __ mov(L5, G5); 849 for (i = 0; i < (VM_Version::v9_instructions_work() ? 64 : 32); i += 2) { 850 __ ldf(FloatRegisterImpl::D, preserve_addr, as_FloatRegister(i), i * wordSize); 851 } 852 853 __ verify_thread(); 854 855 __ jmp(O0, 0); 856 __ delayed()->restore(); 857 858 return start; 859 } 860 861 862 // Support for uint StubRoutine::Sparc::partial_subtype_check( Klass sub, Klass super ); 863 // Arguments : 864 // 865 // ret : O0, returned 866 // icc/xcc: set as O0 (depending on wordSize) 867 // sub : O1, argument, not changed 868 // super: O2, argument, not changed 869 // raddr: O7, blown by call 870 address generate_partial_subtype_check() { 871 __ align(CodeEntryAlignment); 872 StubCodeMark mark(this, "StubRoutines", "partial_subtype_check"); 873 address start = __ pc(); 874 Label miss; 875 876#if defined(COMPILER2) && !defined(_LP64) 877 // Do not use a 'save' because it blows the 64-bit O registers. 878 __ add(SP,-4*wordSize,SP); // Make space for 4 temps (stack must be 2 words aligned) 879 __ st_ptr(L0,SP,(frame::register_save_words+0)*wordSize); 880 __ st_ptr(L1,SP,(frame::register_save_words+1)*wordSize); 881 __ st_ptr(L2,SP,(frame::register_save_words+2)*wordSize); 882 __ st_ptr(L3,SP,(frame::register_save_words+3)*wordSize); 883 Register Rret = O0; 884 Register Rsub = O1; 885 Register Rsuper = O2; 886#else 887 __ save_frame(0); 888 Register Rret = I0; 889 Register Rsub = I1; 890 Register Rsuper = I2; 891#endif 892 893 Register L0_ary_len = L0; 894 Register L1_ary_ptr = L1; 895 Register L2_super = L2; 896 Register L3_index = L3; 897 898 __ check_klass_subtype_slow_path(Rsub, Rsuper, 899 L0, L1, L2, L3, 900 NULL, &miss); 901 902 // Match falls through here. 903 __ addcc(G0,0,Rret); // set Z flags, Z result 904 905#if defined(COMPILER2) && !defined(_LP64) 906 __ ld_ptr(SP,(frame::register_save_words+0)*wordSize,L0); 907 __ ld_ptr(SP,(frame::register_save_words+1)*wordSize,L1); 908 __ ld_ptr(SP,(frame::register_save_words+2)*wordSize,L2); 909 __ ld_ptr(SP,(frame::register_save_words+3)*wordSize,L3); 910 __ retl(); // Result in Rret is zero; flags set to Z 911 __ delayed()->add(SP,4*wordSize,SP); 912#else 913 __ ret(); // Result in Rret is zero; flags set to Z 914 __ delayed()->restore(); 915#endif 916 917 __ BIND(miss); 918 __ addcc(G0,1,Rret); // set NZ flags, NZ result 919 920#if defined(COMPILER2) && !defined(_LP64) 921 __ ld_ptr(SP,(frame::register_save_words+0)*wordSize,L0); 922 __ ld_ptr(SP,(frame::register_save_words+1)*wordSize,L1); 923 __ ld_ptr(SP,(frame::register_save_words+2)*wordSize,L2); 924 __ ld_ptr(SP,(frame::register_save_words+3)*wordSize,L3); 925 __ retl(); // Result in Rret is != 0; flags set to NZ 926 __ delayed()->add(SP,4*wordSize,SP); 927#else 928 __ ret(); // Result in Rret is != 0; flags set to NZ 929 __ delayed()->restore(); 930#endif 931 932 return start; 933 } 934 935 936 // Called from MacroAssembler::verify_oop 937 // 938 address generate_verify_oop_subroutine() { 939 StubCodeMark mark(this, "StubRoutines", "verify_oop_stub"); 940 941 address start = __ pc(); 942 943 __ verify_oop_subroutine(); 944 945 return start; 946 } 947 948 static address disjoint_byte_copy_entry; 949 static address disjoint_short_copy_entry; 950 static address disjoint_int_copy_entry; 951 static address disjoint_long_copy_entry; 952 static address disjoint_oop_copy_entry; 953 954 static address byte_copy_entry; 955 static address short_copy_entry; 956 static address int_copy_entry; 957 static address long_copy_entry; 958 static address oop_copy_entry; 959 960 static address checkcast_copy_entry; 961 962 // 963 // Verify that a register contains clean 32-bits positive value 964 // (high 32-bits are 0) so it could be used in 64-bits shifts (sllx, srax). 965 // 966 // Input: 967 // Rint - 32-bits value 968 // Rtmp - scratch 969 // 970 void assert_clean_int(Register Rint, Register Rtmp) { 971#if defined(ASSERT) && defined(_LP64) 972 __ signx(Rint, Rtmp); 973 __ cmp(Rint, Rtmp); 974 __ breakpoint_trap(Assembler::notEqual, Assembler::xcc); 975#endif 976 } 977 978 // 979 // Generate overlap test for array copy stubs 980 // 981 // Input: 982 // O0 - array1 983 // O1 - array2 984 // O2 - element count 985 // 986 // Kills temps: O3, O4 987 // 988 void array_overlap_test(address no_overlap_target, int log2_elem_size) { 989 assert(no_overlap_target != NULL, "must be generated"); 990 array_overlap_test(no_overlap_target, NULL, log2_elem_size); 991 } 992 void array_overlap_test(Label& L_no_overlap, int log2_elem_size) { 993 array_overlap_test(NULL, &L_no_overlap, log2_elem_size); 994 } 995 void array_overlap_test(address no_overlap_target, Label* NOLp, int log2_elem_size) { 996 const Register from = O0; 997 const Register to = O1; 998 const Register count = O2; 999 const Register to_from = O3; // to - from 1000 const Register byte_count = O4; // count << log2_elem_size 1001 1002 __ subcc(to, from, to_from); 1003 __ sll_ptr(count, log2_elem_size, byte_count); 1004 if (NOLp == NULL) 1005 __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, no_overlap_target); 1006 else 1007 __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, (*NOLp)); 1008 __ delayed()->cmp(to_from, byte_count); 1009 if (NOLp == NULL) 1010 __ brx(Assembler::greaterEqual, false, Assembler::pt, no_overlap_target); 1011 else 1012 __ brx(Assembler::greaterEqual, false, Assembler::pt, (*NOLp)); 1013 __ delayed()->nop(); 1014 } 1015 1016 // 1017 // Generate pre-write barrier for array. 1018 // 1019 // Input: 1020 // addr - register containing starting address 1021 // count - register containing element count 1022 // tmp - scratch register 1023 // 1024 // The input registers are overwritten. 1025 // 1026 void gen_write_ref_array_pre_barrier(Register addr, Register count) { 1027 BarrierSet* bs = Universe::heap()->barrier_set(); 1028 if (bs->has_write_ref_pre_barrier()) { 1029 assert(bs->has_write_ref_array_pre_opt(), 1030 "Else unsupported barrier set."); 1031 1032 __ save_frame(0); 1033 // Save the necessary global regs... will be used after. 1034 if (addr->is_global()) { 1035 __ mov(addr, L0); 1036 } 1037 if (count->is_global()) { 1038 __ mov(count, L1); 1039 } 1040 __ mov(addr->after_save(), O0); 1041 // Get the count into O1 1042 __ call(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_pre)); 1043 __ delayed()->mov(count->after_save(), O1); 1044 if (addr->is_global()) { 1045 __ mov(L0, addr); 1046 } 1047 if (count->is_global()) { 1048 __ mov(L1, count); 1049 } 1050 __ restore(); 1051 } 1052 } 1053 // 1054 // Generate post-write barrier for array. 1055 // 1056 // Input: 1057 // addr - register containing starting address 1058 // count - register containing element count 1059 // tmp - scratch register 1060 // 1061 // The input registers are overwritten. 1062 // 1063 void gen_write_ref_array_post_barrier(Register addr, Register count, 1064 Register tmp) { 1065 BarrierSet* bs = Universe::heap()->barrier_set(); 1066 1067 switch (bs->kind()) { 1068 case BarrierSet::G1SATBCT: 1069 case BarrierSet::G1SATBCTLogging: 1070 { 1071 // Get some new fresh output registers. 1072 __ save_frame(0); 1073 __ mov(addr->after_save(), O0); 1074 __ call(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post)); 1075 __ delayed()->mov(count->after_save(), O1); 1076 __ restore(); 1077 } 1078 break; 1079 case BarrierSet::CardTableModRef: 1080 case BarrierSet::CardTableExtension: 1081 { 1082 CardTableModRefBS* ct = (CardTableModRefBS*)bs; 1083 assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); 1084 assert_different_registers(addr, count, tmp); 1085 1086 Label L_loop; 1087 1088 __ sll_ptr(count, LogBytesPerHeapOop, count); 1089 __ sub(count, BytesPerHeapOop, count); 1090 __ add(count, addr, count); 1091 // Use two shifts to clear out those low order two bits! (Cannot opt. into 1.) 1092 __ srl_ptr(addr, CardTableModRefBS::card_shift, addr); 1093 __ srl_ptr(count, CardTableModRefBS::card_shift, count); 1094 __ sub(count, addr, count); 1095 AddressLiteral rs(ct->byte_map_base); 1096 __ set(rs, tmp); 1097 __ BIND(L_loop); 1098 __ stb(G0, tmp, addr); 1099 __ subcc(count, 1, count); 1100 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_loop); 1101 __ delayed()->add(addr, 1, addr); 1102 } 1103 break; 1104 case BarrierSet::ModRef: 1105 break; 1106 default: 1107 ShouldNotReachHere(); 1108 } 1109 } 1110 1111 1112 // Copy big chunks forward with shift 1113 // 1114 // Inputs: 1115 // from - source arrays 1116 // to - destination array aligned to 8-bytes 1117 // count - elements count to copy >= the count equivalent to 16 bytes 1118 // count_dec - elements count's decrement equivalent to 16 bytes 1119 // L_copy_bytes - copy exit label 1120 // 1121 void copy_16_bytes_forward_with_shift(Register from, Register to, 1122 Register count, int count_dec, Label& L_copy_bytes) { 1123 Label L_loop, L_aligned_copy, L_copy_last_bytes; 1124 1125 // if both arrays have the same alignment mod 8, do 8 bytes aligned copy 1126 __ andcc(from, 7, G1); // misaligned bytes 1127 __ br(Assembler::zero, false, Assembler::pt, L_aligned_copy); 1128 __ delayed()->nop(); 1129 1130 const Register left_shift = G1; // left shift bit counter 1131 const Register right_shift = G5; // right shift bit counter 1132 1133 __ sll(G1, LogBitsPerByte, left_shift); 1134 __ mov(64, right_shift); 1135 __ sub(right_shift, left_shift, right_shift); 1136 1137 // 1138 // Load 2 aligned 8-bytes chunks and use one from previous iteration 1139 // to form 2 aligned 8-bytes chunks to store. 1140 // 1141 __ deccc(count, count_dec); // Pre-decrement 'count' 1142 __ andn(from, 7, from); // Align address 1143 __ ldx(from, 0, O3); 1144 __ inc(from, 8); 1145 __ align(OptoLoopAlignment); 1146 __ BIND(L_loop); 1147 __ ldx(from, 0, O4); 1148 __ deccc(count, count_dec); // Can we do next iteration after this one? 1149 __ ldx(from, 8, G4); 1150 __ inc(to, 16); 1151 __ inc(from, 16); 1152 __ sllx(O3, left_shift, O3); 1153 __ srlx(O4, right_shift, G3); 1154 __ bset(G3, O3); 1155 __ stx(O3, to, -16); 1156 __ sllx(O4, left_shift, O4); 1157 __ srlx(G4, right_shift, G3); 1158 __ bset(G3, O4); 1159 __ stx(O4, to, -8); 1160 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_loop); 1161 __ delayed()->mov(G4, O3); 1162 1163 __ inccc(count, count_dec>>1 ); // + 8 bytes 1164 __ brx(Assembler::negative, true, Assembler::pn, L_copy_last_bytes); 1165 __ delayed()->inc(count, count_dec>>1); // restore 'count' 1166 1167 // copy 8 bytes, part of them already loaded in O3 1168 __ ldx(from, 0, O4); 1169 __ inc(to, 8); 1170 __ inc(from, 8); 1171 __ sllx(O3, left_shift, O3); 1172 __ srlx(O4, right_shift, G3); 1173 __ bset(O3, G3); 1174 __ stx(G3, to, -8); 1175 1176 __ BIND(L_copy_last_bytes); 1177 __ srl(right_shift, LogBitsPerByte, right_shift); // misaligned bytes 1178 __ br(Assembler::always, false, Assembler::pt, L_copy_bytes); 1179 __ delayed()->sub(from, right_shift, from); // restore address 1180 1181 __ BIND(L_aligned_copy); 1182 } 1183 1184 // Copy big chunks backward with shift 1185 // 1186 // Inputs: 1187 // end_from - source arrays end address 1188 // end_to - destination array end address aligned to 8-bytes 1189 // count - elements count to copy >= the count equivalent to 16 bytes 1190 // count_dec - elements count's decrement equivalent to 16 bytes 1191 // L_aligned_copy - aligned copy exit label 1192 // L_copy_bytes - copy exit label 1193 // 1194 void copy_16_bytes_backward_with_shift(Register end_from, Register end_to, 1195 Register count, int count_dec, 1196 Label& L_aligned_copy, Label& L_copy_bytes) { 1197 Label L_loop, L_copy_last_bytes; 1198 1199 // if both arrays have the same alignment mod 8, do 8 bytes aligned copy 1200 __ andcc(end_from, 7, G1); // misaligned bytes 1201 __ br(Assembler::zero, false, Assembler::pt, L_aligned_copy); 1202 __ delayed()->deccc(count, count_dec); // Pre-decrement 'count' 1203 1204 const Register left_shift = G1; // left shift bit counter 1205 const Register right_shift = G5; // right shift bit counter 1206 1207 __ sll(G1, LogBitsPerByte, left_shift); 1208 __ mov(64, right_shift); 1209 __ sub(right_shift, left_shift, right_shift); 1210 1211 // 1212 // Load 2 aligned 8-bytes chunks and use one from previous iteration 1213 // to form 2 aligned 8-bytes chunks to store. 1214 // 1215 __ andn(end_from, 7, end_from); // Align address 1216 __ ldx(end_from, 0, O3); 1217 __ align(OptoLoopAlignment); 1218 __ BIND(L_loop); 1219 __ ldx(end_from, -8, O4); 1220 __ deccc(count, count_dec); // Can we do next iteration after this one? 1221 __ ldx(end_from, -16, G4); 1222 __ dec(end_to, 16); 1223 __ dec(end_from, 16); 1224 __ srlx(O3, right_shift, O3); 1225 __ sllx(O4, left_shift, G3); 1226 __ bset(G3, O3); 1227 __ stx(O3, end_to, 8); 1228 __ srlx(O4, right_shift, O4); 1229 __ sllx(G4, left_shift, G3); 1230 __ bset(G3, O4); 1231 __ stx(O4, end_to, 0); 1232 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_loop); 1233 __ delayed()->mov(G4, O3); 1234 1235 __ inccc(count, count_dec>>1 ); // + 8 bytes 1236 __ brx(Assembler::negative, true, Assembler::pn, L_copy_last_bytes); 1237 __ delayed()->inc(count, count_dec>>1); // restore 'count' 1238 1239 // copy 8 bytes, part of them already loaded in O3 1240 __ ldx(end_from, -8, O4); 1241 __ dec(end_to, 8); 1242 __ dec(end_from, 8); 1243 __ srlx(O3, right_shift, O3); 1244 __ sllx(O4, left_shift, G3); 1245 __ bset(O3, G3); 1246 __ stx(G3, end_to, 0); 1247 1248 __ BIND(L_copy_last_bytes); 1249 __ srl(left_shift, LogBitsPerByte, left_shift); // misaligned bytes 1250 __ br(Assembler::always, false, Assembler::pt, L_copy_bytes); 1251 __ delayed()->add(end_from, left_shift, end_from); // restore address 1252 } 1253 1254 // 1255 // Generate stub for disjoint byte copy. If "aligned" is true, the 1256 // "from" and "to" addresses are assumed to be heapword aligned. 1257 // 1258 // Arguments for generated stub: 1259 // from: O0 1260 // to: O1 1261 // count: O2 treated as signed 1262 // 1263 address generate_disjoint_byte_copy(bool aligned, const char * name) { 1264 __ align(CodeEntryAlignment); 1265 StubCodeMark mark(this, "StubRoutines", name); 1266 address start = __ pc(); 1267 1268 Label L_skip_alignment, L_align; 1269 Label L_copy_byte, L_copy_byte_loop, L_exit; 1270 1271 const Register from = O0; // source array address 1272 const Register to = O1; // destination array address 1273 const Register count = O2; // elements count 1274 const Register offset = O5; // offset from start of arrays 1275 // O3, O4, G3, G4 are used as temp registers 1276 1277 assert_clean_int(count, O3); // Make sure 'count' is clean int. 1278 1279 if (!aligned) disjoint_byte_copy_entry = __ pc(); 1280 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1281 if (!aligned) BLOCK_COMMENT("Entry:"); 1282 1283 // for short arrays, just do single element copy 1284 __ cmp(count, 23); // 16 + 7 1285 __ brx(Assembler::less, false, Assembler::pn, L_copy_byte); 1286 __ delayed()->mov(G0, offset); 1287 1288 if (aligned) { 1289 // 'aligned' == true when it is known statically during compilation 1290 // of this arraycopy call site that both 'from' and 'to' addresses 1291 // are HeapWordSize aligned (see LibraryCallKit::basictype2arraycopy()). 1292 // 1293 // Aligned arrays have 4 bytes alignment in 32-bits VM 1294 // and 8 bytes - in 64-bits VM. So we do it only for 32-bits VM 1295 // 1296#ifndef _LP64 1297 // copy a 4-bytes word if necessary to align 'to' to 8 bytes 1298 __ andcc(to, 7, G0); 1299 __ br(Assembler::zero, false, Assembler::pn, L_skip_alignment); 1300 __ delayed()->ld(from, 0, O3); 1301 __ inc(from, 4); 1302 __ inc(to, 4); 1303 __ dec(count, 4); 1304 __ st(O3, to, -4); 1305 __ BIND(L_skip_alignment); 1306#endif 1307 } else { 1308 // copy bytes to align 'to' on 8 byte boundary 1309 __ andcc(to, 7, G1); // misaligned bytes 1310 __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); 1311 __ delayed()->neg(G1); 1312 __ inc(G1, 8); // bytes need to copy to next 8-bytes alignment 1313 __ sub(count, G1, count); 1314 __ BIND(L_align); 1315 __ ldub(from, 0, O3); 1316 __ deccc(G1); 1317 __ inc(from); 1318 __ stb(O3, to, 0); 1319 __ br(Assembler::notZero, false, Assembler::pt, L_align); 1320 __ delayed()->inc(to); 1321 __ BIND(L_skip_alignment); 1322 } 1323#ifdef _LP64 1324 if (!aligned) 1325#endif 1326 { 1327 // Copy with shift 16 bytes per iteration if arrays do not have 1328 // the same alignment mod 8, otherwise fall through to the next 1329 // code for aligned copy. 1330 // The compare above (count >= 23) guarantes 'count' >= 16 bytes. 1331 // Also jump over aligned copy after the copy with shift completed. 1332 1333 copy_16_bytes_forward_with_shift(from, to, count, 16, L_copy_byte); 1334 } 1335 1336 // Both array are 8 bytes aligned, copy 16 bytes at a time 1337 __ and3(count, 7, G4); // Save count 1338 __ srl(count, 3, count); 1339 generate_disjoint_long_copy_core(aligned); 1340 __ mov(G4, count); // Restore count 1341 1342 // copy tailing bytes 1343 __ BIND(L_copy_byte); 1344 __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); 1345 __ delayed()->nop(); 1346 __ align(OptoLoopAlignment); 1347 __ BIND(L_copy_byte_loop); 1348 __ ldub(from, offset, O3); 1349 __ deccc(count); 1350 __ stb(O3, to, offset); 1351 __ brx(Assembler::notZero, false, Assembler::pt, L_copy_byte_loop); 1352 __ delayed()->inc(offset); 1353 1354 __ BIND(L_exit); 1355 // O3, O4 are used as temp registers 1356 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr, O3, O4); 1357 __ retl(); 1358 __ delayed()->mov(G0, O0); // return 0 1359 return start; 1360 } 1361 1362 // 1363 // Generate stub for conjoint byte copy. If "aligned" is true, the 1364 // "from" and "to" addresses are assumed to be heapword aligned. 1365 // 1366 // Arguments for generated stub: 1367 // from: O0 1368 // to: O1 1369 // count: O2 treated as signed 1370 // 1371 address generate_conjoint_byte_copy(bool aligned, const char * name) { 1372 // Do reverse copy. 1373 1374 __ align(CodeEntryAlignment); 1375 StubCodeMark mark(this, "StubRoutines", name); 1376 address start = __ pc(); 1377 address nooverlap_target = aligned ? 1378 StubRoutines::arrayof_jbyte_disjoint_arraycopy() : 1379 disjoint_byte_copy_entry; 1380 1381 Label L_skip_alignment, L_align, L_aligned_copy; 1382 Label L_copy_byte, L_copy_byte_loop, L_exit; 1383 1384 const Register from = O0; // source array address 1385 const Register to = O1; // destination array address 1386 const Register count = O2; // elements count 1387 const Register end_from = from; // source array end address 1388 const Register end_to = to; // destination array end address 1389 1390 assert_clean_int(count, O3); // Make sure 'count' is clean int. 1391 1392 if (!aligned) byte_copy_entry = __ pc(); 1393 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1394 if (!aligned) BLOCK_COMMENT("Entry:"); 1395 1396 array_overlap_test(nooverlap_target, 0); 1397 1398 __ add(to, count, end_to); // offset after last copied element 1399 1400 // for short arrays, just do single element copy 1401 __ cmp(count, 23); // 16 + 7 1402 __ brx(Assembler::less, false, Assembler::pn, L_copy_byte); 1403 __ delayed()->add(from, count, end_from); 1404 1405 { 1406 // Align end of arrays since they could be not aligned even 1407 // when arrays itself are aligned. 1408 1409 // copy bytes to align 'end_to' on 8 byte boundary 1410 __ andcc(end_to, 7, G1); // misaligned bytes 1411 __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); 1412 __ delayed()->nop(); 1413 __ sub(count, G1, count); 1414 __ BIND(L_align); 1415 __ dec(end_from); 1416 __ dec(end_to); 1417 __ ldub(end_from, 0, O3); 1418 __ deccc(G1); 1419 __ brx(Assembler::notZero, false, Assembler::pt, L_align); 1420 __ delayed()->stb(O3, end_to, 0); 1421 __ BIND(L_skip_alignment); 1422 } 1423#ifdef _LP64 1424 if (aligned) { 1425 // Both arrays are aligned to 8-bytes in 64-bits VM. 1426 // The 'count' is decremented in copy_16_bytes_backward_with_shift() 1427 // in unaligned case. 1428 __ dec(count, 16); 1429 } else 1430#endif 1431 { 1432 // Copy with shift 16 bytes per iteration if arrays do not have 1433 // the same alignment mod 8, otherwise jump to the next 1434 // code for aligned copy (and substracting 16 from 'count' before jump). 1435 // The compare above (count >= 11) guarantes 'count' >= 16 bytes. 1436 // Also jump over aligned copy after the copy with shift completed. 1437 1438 copy_16_bytes_backward_with_shift(end_from, end_to, count, 16, 1439 L_aligned_copy, L_copy_byte); 1440 } 1441 // copy 4 elements (16 bytes) at a time 1442 __ align(OptoLoopAlignment); 1443 __ BIND(L_aligned_copy); 1444 __ dec(end_from, 16); 1445 __ ldx(end_from, 8, O3); 1446 __ ldx(end_from, 0, O4); 1447 __ dec(end_to, 16); 1448 __ deccc(count, 16); 1449 __ stx(O3, end_to, 8); 1450 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_aligned_copy); 1451 __ delayed()->stx(O4, end_to, 0); 1452 __ inc(count, 16); 1453 1454 // copy 1 element (2 bytes) at a time 1455 __ BIND(L_copy_byte); 1456 __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); 1457 __ delayed()->nop(); 1458 __ align(OptoLoopAlignment); 1459 __ BIND(L_copy_byte_loop); 1460 __ dec(end_from); 1461 __ dec(end_to); 1462 __ ldub(end_from, 0, O4); 1463 __ deccc(count); 1464 __ brx(Assembler::greater, false, Assembler::pt, L_copy_byte_loop); 1465 __ delayed()->stb(O4, end_to, 0); 1466 1467 __ BIND(L_exit); 1468 // O3, O4 are used as temp registers 1469 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr, O3, O4); 1470 __ retl(); 1471 __ delayed()->mov(G0, O0); // return 0 1472 return start; 1473 } 1474 1475 // 1476 // Generate stub for disjoint short copy. If "aligned" is true, the 1477 // "from" and "to" addresses are assumed to be heapword aligned. 1478 // 1479 // Arguments for generated stub: 1480 // from: O0 1481 // to: O1 1482 // count: O2 treated as signed 1483 // 1484 address generate_disjoint_short_copy(bool aligned, const char * name) { 1485 __ align(CodeEntryAlignment); 1486 StubCodeMark mark(this, "StubRoutines", name); 1487 address start = __ pc(); 1488 1489 Label L_skip_alignment, L_skip_alignment2; 1490 Label L_copy_2_bytes, L_copy_2_bytes_loop, L_exit; 1491 1492 const Register from = O0; // source array address 1493 const Register to = O1; // destination array address 1494 const Register count = O2; // elements count 1495 const Register offset = O5; // offset from start of arrays 1496 // O3, O4, G3, G4 are used as temp registers 1497 1498 assert_clean_int(count, O3); // Make sure 'count' is clean int. 1499 1500 if (!aligned) disjoint_short_copy_entry = __ pc(); 1501 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1502 if (!aligned) BLOCK_COMMENT("Entry:"); 1503 1504 // for short arrays, just do single element copy 1505 __ cmp(count, 11); // 8 + 3 (22 bytes) 1506 __ brx(Assembler::less, false, Assembler::pn, L_copy_2_bytes); 1507 __ delayed()->mov(G0, offset); 1508 1509 if (aligned) { 1510 // 'aligned' == true when it is known statically during compilation 1511 // of this arraycopy call site that both 'from' and 'to' addresses 1512 // are HeapWordSize aligned (see LibraryCallKit::basictype2arraycopy()). 1513 // 1514 // Aligned arrays have 4 bytes alignment in 32-bits VM 1515 // and 8 bytes - in 64-bits VM. 1516 // 1517#ifndef _LP64 1518 // copy a 2-elements word if necessary to align 'to' to 8 bytes 1519 __ andcc(to, 7, G0); 1520 __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); 1521 __ delayed()->ld(from, 0, O3); 1522 __ inc(from, 4); 1523 __ inc(to, 4); 1524 __ dec(count, 2); 1525 __ st(O3, to, -4); 1526 __ BIND(L_skip_alignment); 1527#endif 1528 } else { 1529 // copy 1 element if necessary to align 'to' on an 4 bytes 1530 __ andcc(to, 3, G0); 1531 __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); 1532 __ delayed()->lduh(from, 0, O3); 1533 __ inc(from, 2); 1534 __ inc(to, 2); 1535 __ dec(count); 1536 __ sth(O3, to, -2); 1537 __ BIND(L_skip_alignment); 1538 1539 // copy 2 elements to align 'to' on an 8 byte boundary 1540 __ andcc(to, 7, G0); 1541 __ br(Assembler::zero, false, Assembler::pn, L_skip_alignment2); 1542 __ delayed()->lduh(from, 0, O3); 1543 __ dec(count, 2); 1544 __ lduh(from, 2, O4); 1545 __ inc(from, 4); 1546 __ inc(to, 4); 1547 __ sth(O3, to, -4); 1548 __ sth(O4, to, -2); 1549 __ BIND(L_skip_alignment2); 1550 } 1551#ifdef _LP64 1552 if (!aligned) 1553#endif 1554 { 1555 // Copy with shift 16 bytes per iteration if arrays do not have 1556 // the same alignment mod 8, otherwise fall through to the next 1557 // code for aligned copy. 1558 // The compare above (count >= 11) guarantes 'count' >= 16 bytes. 1559 // Also jump over aligned copy after the copy with shift completed. 1560 1561 copy_16_bytes_forward_with_shift(from, to, count, 8, L_copy_2_bytes); 1562 } 1563 1564 // Both array are 8 bytes aligned, copy 16 bytes at a time 1565 __ and3(count, 3, G4); // Save 1566 __ srl(count, 2, count); 1567 generate_disjoint_long_copy_core(aligned); 1568 __ mov(G4, count); // restore 1569 1570 // copy 1 element at a time 1571 __ BIND(L_copy_2_bytes); 1572 __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); 1573 __ delayed()->nop(); 1574 __ align(OptoLoopAlignment); 1575 __ BIND(L_copy_2_bytes_loop); 1576 __ lduh(from, offset, O3); 1577 __ deccc(count); 1578 __ sth(O3, to, offset); 1579 __ brx(Assembler::notZero, false, Assembler::pt, L_copy_2_bytes_loop); 1580 __ delayed()->inc(offset, 2); 1581 1582 __ BIND(L_exit); 1583 // O3, O4 are used as temp registers 1584 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr, O3, O4); 1585 __ retl(); 1586 __ delayed()->mov(G0, O0); // return 0 1587 return start; 1588 } 1589 1590 // 1591 // Generate stub for conjoint short copy. If "aligned" is true, the 1592 // "from" and "to" addresses are assumed to be heapword aligned. 1593 // 1594 // Arguments for generated stub: 1595 // from: O0 1596 // to: O1 1597 // count: O2 treated as signed 1598 // 1599 address generate_conjoint_short_copy(bool aligned, const char * name) { 1600 // Do reverse copy. 1601 1602 __ align(CodeEntryAlignment); 1603 StubCodeMark mark(this, "StubRoutines", name); 1604 address start = __ pc(); 1605 address nooverlap_target = aligned ? 1606 StubRoutines::arrayof_jshort_disjoint_arraycopy() : 1607 disjoint_short_copy_entry; 1608 1609 Label L_skip_alignment, L_skip_alignment2, L_aligned_copy; 1610 Label L_copy_2_bytes, L_copy_2_bytes_loop, L_exit; 1611 1612 const Register from = O0; // source array address 1613 const Register to = O1; // destination array address 1614 const Register count = O2; // elements count 1615 const Register end_from = from; // source array end address 1616 const Register end_to = to; // destination array end address 1617 1618 const Register byte_count = O3; // bytes count to copy 1619 1620 assert_clean_int(count, O3); // Make sure 'count' is clean int. 1621 1622 if (!aligned) short_copy_entry = __ pc(); 1623 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1624 if (!aligned) BLOCK_COMMENT("Entry:"); 1625 1626 array_overlap_test(nooverlap_target, 1); 1627 1628 __ sllx(count, LogBytesPerShort, byte_count); 1629 __ add(to, byte_count, end_to); // offset after last copied element 1630 1631 // for short arrays, just do single element copy 1632 __ cmp(count, 11); // 8 + 3 (22 bytes) 1633 __ brx(Assembler::less, false, Assembler::pn, L_copy_2_bytes); 1634 __ delayed()->add(from, byte_count, end_from); 1635 1636 { 1637 // Align end of arrays since they could be not aligned even 1638 // when arrays itself are aligned. 1639 1640 // copy 1 element if necessary to align 'end_to' on an 4 bytes 1641 __ andcc(end_to, 3, G0); 1642 __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); 1643 __ delayed()->lduh(end_from, -2, O3); 1644 __ dec(end_from, 2); 1645 __ dec(end_to, 2); 1646 __ dec(count); 1647 __ sth(O3, end_to, 0); 1648 __ BIND(L_skip_alignment); 1649 1650 // copy 2 elements to align 'end_to' on an 8 byte boundary 1651 __ andcc(end_to, 7, G0); 1652 __ br(Assembler::zero, false, Assembler::pn, L_skip_alignment2); 1653 __ delayed()->lduh(end_from, -2, O3); 1654 __ dec(count, 2); 1655 __ lduh(end_from, -4, O4); 1656 __ dec(end_from, 4); 1657 __ dec(end_to, 4); 1658 __ sth(O3, end_to, 2); 1659 __ sth(O4, end_to, 0); 1660 __ BIND(L_skip_alignment2); 1661 } 1662#ifdef _LP64 1663 if (aligned) { 1664 // Both arrays are aligned to 8-bytes in 64-bits VM. 1665 // The 'count' is decremented in copy_16_bytes_backward_with_shift() 1666 // in unaligned case. 1667 __ dec(count, 8); 1668 } else 1669#endif 1670 { 1671 // Copy with shift 16 bytes per iteration if arrays do not have 1672 // the same alignment mod 8, otherwise jump to the next 1673 // code for aligned copy (and substracting 8 from 'count' before jump). 1674 // The compare above (count >= 11) guarantes 'count' >= 16 bytes. 1675 // Also jump over aligned copy after the copy with shift completed. 1676 1677 copy_16_bytes_backward_with_shift(end_from, end_to, count, 8, 1678 L_aligned_copy, L_copy_2_bytes); 1679 } 1680 // copy 4 elements (16 bytes) at a time 1681 __ align(OptoLoopAlignment); 1682 __ BIND(L_aligned_copy); 1683 __ dec(end_from, 16); 1684 __ ldx(end_from, 8, O3); 1685 __ ldx(end_from, 0, O4); 1686 __ dec(end_to, 16); 1687 __ deccc(count, 8); 1688 __ stx(O3, end_to, 8); 1689 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_aligned_copy); 1690 __ delayed()->stx(O4, end_to, 0); 1691 __ inc(count, 8); 1692 1693 // copy 1 element (2 bytes) at a time 1694 __ BIND(L_copy_2_bytes); 1695 __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); 1696 __ delayed()->nop(); 1697 __ BIND(L_copy_2_bytes_loop); 1698 __ dec(end_from, 2); 1699 __ dec(end_to, 2); 1700 __ lduh(end_from, 0, O4); 1701 __ deccc(count); 1702 __ brx(Assembler::greater, false, Assembler::pt, L_copy_2_bytes_loop); 1703 __ delayed()->sth(O4, end_to, 0); 1704 1705 __ BIND(L_exit); 1706 // O3, O4 are used as temp registers 1707 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr, O3, O4); 1708 __ retl(); 1709 __ delayed()->mov(G0, O0); // return 0 1710 return start; 1711 } 1712 1713 // 1714 // Generate core code for disjoint int copy (and oop copy on 32-bit). 1715 // If "aligned" is true, the "from" and "to" addresses are assumed 1716 // to be heapword aligned. 1717 // 1718 // Arguments: 1719 // from: O0 1720 // to: O1 1721 // count: O2 treated as signed 1722 // 1723 void generate_disjoint_int_copy_core(bool aligned) { 1724 1725 Label L_skip_alignment, L_aligned_copy; 1726 Label L_copy_16_bytes, L_copy_4_bytes, L_copy_4_bytes_loop, L_exit; 1727 1728 const Register from = O0; // source array address 1729 const Register to = O1; // destination array address 1730 const Register count = O2; // elements count 1731 const Register offset = O5; // offset from start of arrays 1732 // O3, O4, G3, G4 are used as temp registers 1733 1734 // 'aligned' == true when it is known statically during compilation 1735 // of this arraycopy call site that both 'from' and 'to' addresses 1736 // are HeapWordSize aligned (see LibraryCallKit::basictype2arraycopy()). 1737 // 1738 // Aligned arrays have 4 bytes alignment in 32-bits VM 1739 // and 8 bytes - in 64-bits VM. 1740 // 1741#ifdef _LP64 1742 if (!aligned) 1743#endif 1744 { 1745 // The next check could be put under 'ifndef' since the code in 1746 // generate_disjoint_long_copy_core() has own checks and set 'offset'. 1747 1748 // for short arrays, just do single element copy 1749 __ cmp(count, 5); // 4 + 1 (20 bytes) 1750 __ brx(Assembler::lessEqual, false, Assembler::pn, L_copy_4_bytes); 1751 __ delayed()->mov(G0, offset); 1752 1753 // copy 1 element to align 'to' on an 8 byte boundary 1754 __ andcc(to, 7, G0); 1755 __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); 1756 __ delayed()->ld(from, 0, O3); 1757 __ inc(from, 4); 1758 __ inc(to, 4); 1759 __ dec(count); 1760 __ st(O3, to, -4); 1761 __ BIND(L_skip_alignment); 1762 1763 // if arrays have same alignment mod 8, do 4 elements copy 1764 __ andcc(from, 7, G0); 1765 __ br(Assembler::zero, false, Assembler::pt, L_aligned_copy); 1766 __ delayed()->ld(from, 0, O3); 1767 1768 // 1769 // Load 2 aligned 8-bytes chunks and use one from previous iteration 1770 // to form 2 aligned 8-bytes chunks to store. 1771 // 1772 // copy_16_bytes_forward_with_shift() is not used here since this 1773 // code is more optimal. 1774 1775 // copy with shift 4 elements (16 bytes) at a time 1776 __ dec(count, 4); // The cmp at the beginning guaranty count >= 4 1777 1778 __ align(OptoLoopAlignment); 1779 __ BIND(L_copy_16_bytes); 1780 __ ldx(from, 4, O4); 1781 __ deccc(count, 4); // Can we do next iteration after this one? 1782 __ ldx(from, 12, G4); 1783 __ inc(to, 16); 1784 __ inc(from, 16); 1785 __ sllx(O3, 32, O3); 1786 __ srlx(O4, 32, G3); 1787 __ bset(G3, O3); 1788 __ stx(O3, to, -16); 1789 __ sllx(O4, 32, O4); 1790 __ srlx(G4, 32, G3); 1791 __ bset(G3, O4); 1792 __ stx(O4, to, -8); 1793 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_copy_16_bytes); 1794 __ delayed()->mov(G4, O3); 1795 1796 __ br(Assembler::always, false, Assembler::pt, L_copy_4_bytes); 1797 __ delayed()->inc(count, 4); // restore 'count' 1798 1799 __ BIND(L_aligned_copy); 1800 } 1801 // copy 4 elements (16 bytes) at a time 1802 __ and3(count, 1, G4); // Save 1803 __ srl(count, 1, count); 1804 generate_disjoint_long_copy_core(aligned); 1805 __ mov(G4, count); // Restore 1806 1807 // copy 1 element at a time 1808 __ BIND(L_copy_4_bytes); 1809 __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); 1810 __ delayed()->nop(); 1811 __ BIND(L_copy_4_bytes_loop); 1812 __ ld(from, offset, O3); 1813 __ deccc(count); 1814 __ st(O3, to, offset); 1815 __ brx(Assembler::notZero, false, Assembler::pt, L_copy_4_bytes_loop); 1816 __ delayed()->inc(offset, 4); 1817 __ BIND(L_exit); 1818 } 1819 1820 // 1821 // Generate stub for disjoint int copy. If "aligned" is true, the 1822 // "from" and "to" addresses are assumed to be heapword aligned. 1823 // 1824 // Arguments for generated stub: 1825 // from: O0 1826 // to: O1 1827 // count: O2 treated as signed 1828 // 1829 address generate_disjoint_int_copy(bool aligned, const char * name) { 1830 __ align(CodeEntryAlignment); 1831 StubCodeMark mark(this, "StubRoutines", name); 1832 address start = __ pc(); 1833 1834 const Register count = O2; 1835 assert_clean_int(count, O3); // Make sure 'count' is clean int. 1836 1837 if (!aligned) disjoint_int_copy_entry = __ pc(); 1838 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1839 if (!aligned) BLOCK_COMMENT("Entry:"); 1840 1841 generate_disjoint_int_copy_core(aligned); 1842 1843 // O3, O4 are used as temp registers 1844 inc_counter_np(SharedRuntime::_jint_array_copy_ctr, O3, O4); 1845 __ retl(); 1846 __ delayed()->mov(G0, O0); // return 0 1847 return start; 1848 } 1849 1850 // 1851 // Generate core code for conjoint int copy (and oop copy on 32-bit). 1852 // If "aligned" is true, the "from" and "to" addresses are assumed 1853 // to be heapword aligned. 1854 // 1855 // Arguments: 1856 // from: O0 1857 // to: O1 1858 // count: O2 treated as signed 1859 // 1860 void generate_conjoint_int_copy_core(bool aligned) { 1861 // Do reverse copy. 1862 1863 Label L_skip_alignment, L_aligned_copy; 1864 Label L_copy_16_bytes, L_copy_4_bytes, L_copy_4_bytes_loop, L_exit; 1865 1866 const Register from = O0; // source array address 1867 const Register to = O1; // destination array address 1868 const Register count = O2; // elements count 1869 const Register end_from = from; // source array end address 1870 const Register end_to = to; // destination array end address 1871 // O3, O4, O5, G3 are used as temp registers 1872 1873 const Register byte_count = O3; // bytes count to copy 1874 1875 __ sllx(count, LogBytesPerInt, byte_count); 1876 __ add(to, byte_count, end_to); // offset after last copied element 1877 1878 __ cmp(count, 5); // for short arrays, just do single element copy 1879 __ brx(Assembler::lessEqual, false, Assembler::pn, L_copy_4_bytes); 1880 __ delayed()->add(from, byte_count, end_from); 1881 1882 // copy 1 element to align 'to' on an 8 byte boundary 1883 __ andcc(end_to, 7, G0); 1884 __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); 1885 __ delayed()->nop(); 1886 __ dec(count); 1887 __ dec(end_from, 4); 1888 __ dec(end_to, 4); 1889 __ ld(end_from, 0, O4); 1890 __ st(O4, end_to, 0); 1891 __ BIND(L_skip_alignment); 1892 1893 // Check if 'end_from' and 'end_to' has the same alignment. 1894 __ andcc(end_from, 7, G0); 1895 __ br(Assembler::zero, false, Assembler::pt, L_aligned_copy); 1896 __ delayed()->dec(count, 4); // The cmp at the start guaranty cnt >= 4 1897 1898 // copy with shift 4 elements (16 bytes) at a time 1899 // 1900 // Load 2 aligned 8-bytes chunks and use one from previous iteration 1901 // to form 2 aligned 8-bytes chunks to store. 1902 // 1903 __ ldx(end_from, -4, O3); 1904 __ align(OptoLoopAlignment); 1905 __ BIND(L_copy_16_bytes); 1906 __ ldx(end_from, -12, O4); 1907 __ deccc(count, 4); 1908 __ ldx(end_from, -20, O5); 1909 __ dec(end_to, 16); 1910 __ dec(end_from, 16); 1911 __ srlx(O3, 32, O3); 1912 __ sllx(O4, 32, G3); 1913 __ bset(G3, O3); 1914 __ stx(O3, end_to, 8); 1915 __ srlx(O4, 32, O4); 1916 __ sllx(O5, 32, G3); 1917 __ bset(O4, G3); 1918 __ stx(G3, end_to, 0); 1919 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_copy_16_bytes); 1920 __ delayed()->mov(O5, O3); 1921 1922 __ br(Assembler::always, false, Assembler::pt, L_copy_4_bytes); 1923 __ delayed()->inc(count, 4); 1924 1925 // copy 4 elements (16 bytes) at a time 1926 __ align(OptoLoopAlignment); 1927 __ BIND(L_aligned_copy); 1928 __ dec(end_from, 16); 1929 __ ldx(end_from, 8, O3); 1930 __ ldx(end_from, 0, O4); 1931 __ dec(end_to, 16); 1932 __ deccc(count, 4); 1933 __ stx(O3, end_to, 8); 1934 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_aligned_copy); 1935 __ delayed()->stx(O4, end_to, 0); 1936 __ inc(count, 4); 1937 1938 // copy 1 element (4 bytes) at a time 1939 __ BIND(L_copy_4_bytes); 1940 __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); 1941 __ delayed()->nop(); 1942 __ BIND(L_copy_4_bytes_loop); 1943 __ dec(end_from, 4); 1944 __ dec(end_to, 4); 1945 __ ld(end_from, 0, O4); 1946 __ deccc(count); 1947 __ brx(Assembler::greater, false, Assembler::pt, L_copy_4_bytes_loop); 1948 __ delayed()->st(O4, end_to, 0); 1949 __ BIND(L_exit); 1950 } 1951 1952 // 1953 // Generate stub for conjoint int copy. If "aligned" is true, the 1954 // "from" and "to" addresses are assumed to be heapword aligned. 1955 // 1956 // Arguments for generated stub: 1957 // from: O0 1958 // to: O1 1959 // count: O2 treated as signed 1960 // 1961 address generate_conjoint_int_copy(bool aligned, const char * name) { 1962 __ align(CodeEntryAlignment); 1963 StubCodeMark mark(this, "StubRoutines", name); 1964 address start = __ pc(); 1965 1966 address nooverlap_target = aligned ? 1967 StubRoutines::arrayof_jint_disjoint_arraycopy() : 1968 disjoint_int_copy_entry; 1969 1970 assert_clean_int(O2, O3); // Make sure 'count' is clean int. 1971 1972 if (!aligned) int_copy_entry = __ pc(); 1973 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1974 if (!aligned) BLOCK_COMMENT("Entry:"); 1975 1976 array_overlap_test(nooverlap_target, 2); 1977 1978 generate_conjoint_int_copy_core(aligned); 1979 1980 // O3, O4 are used as temp registers 1981 inc_counter_np(SharedRuntime::_jint_array_copy_ctr, O3, O4); 1982 __ retl(); 1983 __ delayed()->mov(G0, O0); // return 0 1984 return start; 1985 } 1986 1987 // 1988 // Generate core code for disjoint long copy (and oop copy on 64-bit). 1989 // "aligned" is ignored, because we must make the stronger 1990 // assumption that both addresses are always 64-bit aligned. 1991 // 1992 // Arguments: 1993 // from: O0 1994 // to: O1 1995 // count: O2 treated as signed 1996 // 1997 // count -= 2; 1998 // if ( count >= 0 ) { // >= 2 elements 1999 // if ( count > 6) { // >= 8 elements 2000 // count -= 6; // original count - 8 2001 // do { 2002 // copy_8_elements; 2003 // count -= 8; 2004 // } while ( count >= 0 ); 2005 // count += 6; 2006 // } 2007 // if ( count >= 0 ) { // >= 2 elements 2008 // do { 2009 // copy_2_elements; 2010 // } while ( (count=count-2) >= 0 ); 2011 // } 2012 // } 2013 // count += 2; 2014 // if ( count != 0 ) { // 1 element left 2015 // copy_1_element; 2016 // } 2017 // 2018 void generate_disjoint_long_copy_core(bool aligned) { 2019 Label L_copy_8_bytes, L_copy_16_bytes, L_exit; 2020 const Register from = O0; // source array address 2021 const Register to = O1; // destination array address 2022 const Register count = O2; // elements count 2023 const Register offset0 = O4; // element offset 2024 const Register offset8 = O5; // next element offset 2025 2026 __ deccc(count, 2); 2027 __ mov(G0, offset0); // offset from start of arrays (0) 2028 __ brx(Assembler::negative, false, Assembler::pn, L_copy_8_bytes ); 2029 __ delayed()->add(offset0, 8, offset8); 2030 2031 // Copy by 64 bytes chunks 2032 Label L_copy_64_bytes; 2033 const Register from64 = O3; // source address 2034 const Register to64 = G3; // destination address 2035 __ subcc(count, 6, O3); 2036 __ brx(Assembler::negative, false, Assembler::pt, L_copy_16_bytes ); 2037 __ delayed()->mov(to, to64); 2038 // Now we can use O4(offset0), O5(offset8) as temps 2039 __ mov(O3, count); 2040 __ mov(from, from64); 2041 2042 __ align(OptoLoopAlignment); 2043 __ BIND(L_copy_64_bytes); 2044 for( int off = 0; off < 64; off += 16 ) { 2045 __ ldx(from64, off+0, O4); 2046 __ ldx(from64, off+8, O5); 2047 __ stx(O4, to64, off+0); 2048 __ stx(O5, to64, off+8); 2049 } 2050 __ deccc(count, 8); 2051 __ inc(from64, 64); 2052 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_copy_64_bytes); 2053 __ delayed()->inc(to64, 64); 2054 2055 // Restore O4(offset0), O5(offset8) 2056 __ sub(from64, from, offset0); 2057 __ inccc(count, 6); 2058 __ brx(Assembler::negative, false, Assembler::pn, L_copy_8_bytes ); 2059 __ delayed()->add(offset0, 8, offset8); 2060 2061 // Copy by 16 bytes chunks 2062 __ align(OptoLoopAlignment); 2063 __ BIND(L_copy_16_bytes); 2064 __ ldx(from, offset0, O3); 2065 __ ldx(from, offset8, G3); 2066 __ deccc(count, 2); 2067 __ stx(O3, to, offset0); 2068 __ inc(offset0, 16); 2069 __ stx(G3, to, offset8); 2070 __ brx(Assembler::greaterEqual, false, Assembler::pt, L_copy_16_bytes); 2071 __ delayed()->inc(offset8, 16); 2072 2073 // Copy last 8 bytes 2074 __ BIND(L_copy_8_bytes); 2075 __ inccc(count, 2); 2076 __ brx(Assembler::zero, true, Assembler::pn, L_exit ); 2077 __ delayed()->mov(offset0, offset8); // Set O5 used by other stubs 2078 __ ldx(from, offset0, O3); 2079 __ stx(O3, to, offset0); 2080 __ BIND(L_exit); 2081 } 2082 2083 // 2084 // Generate stub for disjoint long copy. 2085 // "aligned" is ignored, because we must make the stronger 2086 // assumption that both addresses are always 64-bit aligned. 2087 // 2088 // Arguments for generated stub: 2089 // from: O0 2090 // to: O1 2091 // count: O2 treated as signed 2092 // 2093 address generate_disjoint_long_copy(bool aligned, const char * name) { 2094 __ align(CodeEntryAlignment); 2095 StubCodeMark mark(this, "StubRoutines", name); 2096 address start = __ pc(); 2097 2098 assert_clean_int(O2, O3); // Make sure 'count' is clean int. 2099 2100 if (!aligned) disjoint_long_copy_entry = __ pc(); 2101 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 2102 if (!aligned) BLOCK_COMMENT("Entry:"); 2103 2104 generate_disjoint_long_copy_core(aligned); 2105 2106 // O3, O4 are used as temp registers 2107 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr, O3, O4); 2108 __ retl(); 2109 __ delayed()->mov(G0, O0); // return 0 2110 return start; 2111 } 2112 2113 // 2114 // Generate core code for conjoint long copy (and oop copy on 64-bit). 2115 // "aligned" is ignored, because we must make the stronger 2116 // assumption that both addresses are always 64-bit aligned. 2117 // 2118 // Arguments: 2119 // from: O0 2120 // to: O1 2121 // count: O2 treated as signed 2122 // 2123 void generate_conjoint_long_copy_core(bool aligned) { 2124 // Do reverse copy. 2125 Label L_copy_8_bytes, L_copy_16_bytes, L_exit; 2126 const Register from = O0; // source array address 2127 const Register to = O1; // destination array address 2128 const Register count = O2; // elements count 2129 const Register offset8 = O4; // element offset 2130 const Register offset0 = O5; // previous element offset 2131 2132 __ subcc(count, 1, count); 2133 __ brx(Assembler::lessEqual, false, Assembler::pn, L_copy_8_bytes ); 2134 __ delayed()->sllx(count, LogBytesPerLong, offset8); 2135 __ sub(offset8, 8, offset0); 2136 __ align(OptoLoopAlignment); 2137 __ BIND(L_copy_16_bytes); 2138 __ ldx(from, offset8, O2); 2139 __ ldx(from, offset0, O3); 2140 __ stx(O2, to, offset8); 2141 __ deccc(offset8, 16); // use offset8 as counter 2142 __ stx(O3, to, offset0); 2143 __ brx(Assembler::greater, false, Assembler::pt, L_copy_16_bytes); 2144 __ delayed()->dec(offset0, 16); 2145 2146 __ BIND(L_copy_8_bytes); 2147 __ brx(Assembler::negative, false, Assembler::pn, L_exit ); 2148 __ delayed()->nop(); 2149 __ ldx(from, 0, O3); 2150 __ stx(O3, to, 0); 2151 __ BIND(L_exit); 2152 } 2153 2154 // Generate stub for conjoint long copy. 2155 // "aligned" is ignored, because we must make the stronger 2156 // assumption that both addresses are always 64-bit aligned. 2157 // 2158 // Arguments for generated stub: 2159 // from: O0 2160 // to: O1 2161 // count: O2 treated as signed 2162 // 2163 address generate_conjoint_long_copy(bool aligned, const char * name) { 2164 __ align(CodeEntryAlignment); 2165 StubCodeMark mark(this, "StubRoutines", name); 2166 address start = __ pc(); 2167 2168 assert(!aligned, "usage"); 2169 address nooverlap_target = disjoint_long_copy_entry; 2170 2171 assert_clean_int(O2, O3); // Make sure 'count' is clean int. 2172 2173 if (!aligned) long_copy_entry = __ pc(); 2174 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 2175 if (!aligned) BLOCK_COMMENT("Entry:"); 2176 2177 array_overlap_test(nooverlap_target, 3); 2178 2179 generate_conjoint_long_copy_core(aligned); 2180 2181 // O3, O4 are used as temp registers 2182 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr, O3, O4); 2183 __ retl(); 2184 __ delayed()->mov(G0, O0); // return 0 2185 return start; 2186 } 2187 2188 // Generate stub for disjoint oop copy. If "aligned" is true, the 2189 // "from" and "to" addresses are assumed to be heapword aligned. 2190 // 2191 // Arguments for generated stub: 2192 // from: O0 2193 // to: O1 2194 // count: O2 treated as signed 2195 // 2196 address generate_disjoint_oop_copy(bool aligned, const char * name) { 2197 2198 const Register from = O0; // source array address 2199 const Register to = O1; // destination array address 2200 const Register count = O2; // elements count 2201 2202 __ align(CodeEntryAlignment); 2203 StubCodeMark mark(this, "StubRoutines", name); 2204 address start = __ pc(); 2205 2206 assert_clean_int(count, O3); // Make sure 'count' is clean int. 2207 2208 if (!aligned) disjoint_oop_copy_entry = __ pc(); 2209 // caller can pass a 64-bit byte count here 2210 if (!aligned) BLOCK_COMMENT("Entry:"); 2211 2212 // save arguments for barrier generation 2213 __ mov(to, G1); 2214 __ mov(count, G5); 2215 gen_write_ref_array_pre_barrier(G1, G5); 2216 #ifdef _LP64 2217 assert_clean_int(count, O3); // Make sure 'count' is clean int. 2218 if (UseCompressedOops) { 2219 generate_disjoint_int_copy_core(aligned); 2220 } else { 2221 generate_disjoint_long_copy_core(aligned); 2222 } 2223 #else 2224 generate_disjoint_int_copy_core(aligned); 2225 #endif 2226 // O0 is used as temp register 2227 gen_write_ref_array_post_barrier(G1, G5, O0); 2228 2229 // O3, O4 are used as temp registers 2230 inc_counter_np(SharedRuntime::_oop_array_copy_ctr, O3, O4); 2231 __ retl(); 2232 __ delayed()->mov(G0, O0); // return 0 2233 return start; 2234 } 2235 2236 // Generate stub for conjoint oop copy. If "aligned" is true, the 2237 // "from" and "to" addresses are assumed to be heapword aligned. 2238 // 2239 // Arguments for generated stub: 2240 // from: O0 2241 // to: O1 2242 // count: O2 treated as signed 2243 // 2244 address generate_conjoint_oop_copy(bool aligned, const char * name) { 2245 2246 const Register from = O0; // source array address 2247 const Register to = O1; // destination array address 2248 const Register count = O2; // elements count 2249 2250 __ align(CodeEntryAlignment); 2251 StubCodeMark mark(this, "StubRoutines", name); 2252 address start = __ pc(); 2253 2254 assert_clean_int(count, O3); // Make sure 'count' is clean int. 2255 2256 if (!aligned) oop_copy_entry = __ pc(); 2257 // caller can pass a 64-bit byte count here 2258 if (!aligned) BLOCK_COMMENT("Entry:"); 2259 2260 // save arguments for barrier generation 2261 __ mov(to, G1); 2262 __ mov(count, G5); 2263 2264 gen_write_ref_array_pre_barrier(G1, G5); 2265 2266 address nooverlap_target = aligned ? 2267 StubRoutines::arrayof_oop_disjoint_arraycopy() : 2268 disjoint_oop_copy_entry; 2269 2270 array_overlap_test(nooverlap_target, LogBytesPerHeapOop); 2271 2272 #ifdef _LP64 2273 if (UseCompressedOops) { 2274 generate_conjoint_int_copy_core(aligned); 2275 } else { 2276 generate_conjoint_long_copy_core(aligned); 2277 } 2278 #else 2279 generate_conjoint_int_copy_core(aligned); 2280 #endif 2281 2282 // O0 is used as temp register 2283 gen_write_ref_array_post_barrier(G1, G5, O0); 2284 2285 // O3, O4 are used as temp registers 2286 inc_counter_np(SharedRuntime::_oop_array_copy_ctr, O3, O4); 2287 __ retl(); 2288 __ delayed()->mov(G0, O0); // return 0 2289 return start; 2290 } 2291 2292 2293 // Helper for generating a dynamic type check. 2294 // Smashes only the given temp registers. 2295 void generate_type_check(Register sub_klass, 2296 Register super_check_offset, 2297 Register super_klass, 2298 Register temp, 2299 Label& L_success) { 2300 assert_different_registers(sub_klass, super_check_offset, super_klass, temp); 2301 2302 BLOCK_COMMENT("type_check:"); 2303 2304 Label L_miss, L_pop_to_miss; 2305 2306 assert_clean_int(super_check_offset, temp); 2307 2308 __ check_klass_subtype_fast_path(sub_klass, super_klass, temp, noreg, 2309 &L_success, &L_miss, NULL, 2310 super_check_offset); 2311 2312 BLOCK_COMMENT("type_check_slow_path:"); 2313 __ save_frame(0); 2314 __ check_klass_subtype_slow_path(sub_klass->after_save(), 2315 super_klass->after_save(), 2316 L0, L1, L2, L4, 2317 NULL, &L_pop_to_miss); 2318 __ ba(false, L_success); 2319 __ delayed()->restore(); 2320 2321 __ bind(L_pop_to_miss); 2322 __ restore(); 2323 2324 // Fall through on failure! 2325 __ BIND(L_miss); 2326 } 2327 2328 2329 // Generate stub for checked oop copy. 2330 // 2331 // Arguments for generated stub: 2332 // from: O0 2333 // to: O1 2334 // count: O2 treated as signed 2335 // ckoff: O3 (super_check_offset) 2336 // ckval: O4 (super_klass) 2337 // ret: O0 zero for success; (-1^K) where K is partial transfer count 2338 // 2339 address generate_checkcast_copy(const char* name) { 2340 2341 const Register O0_from = O0; // source array address 2342 const Register O1_to = O1; // destination array address 2343 const Register O2_count = O2; // elements count 2344 const Register O3_ckoff = O3; // super_check_offset 2345 const Register O4_ckval = O4; // super_klass 2346 2347 const Register O5_offset = O5; // loop var, with stride wordSize 2348 const Register G1_remain = G1; // loop var, with stride -1 2349 const Register G3_oop = G3; // actual oop copied 2350 const Register G4_klass = G4; // oop._klass 2351 const Register G5_super = G5; // oop._klass._primary_supers[ckval] 2352 2353 __ align(CodeEntryAlignment); 2354 StubCodeMark mark(this, "StubRoutines", name); 2355 address start = __ pc(); 2356 2357 gen_write_ref_array_pre_barrier(O1, O2); 2358 2359#ifdef ASSERT 2360 // We sometimes save a frame (see generate_type_check below). 2361 // If this will cause trouble, let's fail now instead of later. 2362 __ save_frame(0); 2363 __ restore(); 2364#endif 2365 2366#ifdef ASSERT 2367 // caller guarantees that the arrays really are different 2368 // otherwise, we would have to make conjoint checks 2369 { Label L; 2370 __ mov(O3, G1); // spill: overlap test smashes O3 2371 __ mov(O4, G4); // spill: overlap test smashes O4 2372 array_overlap_test(L, LogBytesPerHeapOop); 2373 __ stop("checkcast_copy within a single array"); 2374 __ bind(L); 2375 __ mov(G1, O3); 2376 __ mov(G4, O4); 2377 } 2378#endif //ASSERT 2379 2380 assert_clean_int(O2_count, G1); // Make sure 'count' is clean int. 2381 2382 checkcast_copy_entry = __ pc(); 2383 // caller can pass a 64-bit byte count here (from generic stub) 2384 BLOCK_COMMENT("Entry:"); 2385 2386 Label load_element, store_element, do_card_marks, fail, done; 2387 __ addcc(O2_count, 0, G1_remain); // initialize loop index, and test it 2388 __ brx(Assembler::notZero, false, Assembler::pt, load_element); 2389 __ delayed()->mov(G0, O5_offset); // offset from start of arrays 2390 2391 // Empty array: Nothing to do. 2392 inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr, O3, O4); 2393 __ retl(); 2394 __ delayed()->set(0, O0); // return 0 on (trivial) success 2395 2396 // ======== begin loop ======== 2397 // (Loop is rotated; its entry is load_element.) 2398 // Loop variables: 2399 // (O5 = 0; ; O5 += wordSize) --- offset from src, dest arrays 2400 // (O2 = len; O2 != 0; O2--) --- number of oops *remaining* 2401 // G3, G4, G5 --- current oop, oop.klass, oop.klass.super 2402 __ align(OptoLoopAlignment); 2403 2404 __ BIND(store_element); 2405 __ deccc(G1_remain); // decrement the count 2406 __ store_heap_oop(G3_oop, O1_to, O5_offset); // store the oop 2407 __ inc(O5_offset, heapOopSize); // step to next offset 2408 __ brx(Assembler::zero, true, Assembler::pt, do_card_marks); 2409 __ delayed()->set(0, O0); // return -1 on success 2410 2411 // ======== loop entry is here ======== 2412 __ BIND(load_element); 2413 __ load_heap_oop(O0_from, O5_offset, G3_oop); // load the oop 2414 __ br_null(G3_oop, true, Assembler::pt, store_element); 2415 __ delayed()->nop(); 2416 2417 __ load_klass(G3_oop, G4_klass); // query the object klass 2418 2419 generate_type_check(G4_klass, O3_ckoff, O4_ckval, G5_super, 2420 // branch to this on success: 2421 store_element); 2422 // ======== end loop ======== 2423 2424 // It was a real error; we must depend on the caller to finish the job. 2425 // Register G1 has number of *remaining* oops, O2 number of *total* oops. 2426 // Emit GC store barriers for the oops we have copied (O2 minus G1), 2427 // and report their number to the caller. 2428 __ BIND(fail); 2429 __ subcc(O2_count, G1_remain, O2_count); 2430 __ brx(Assembler::zero, false, Assembler::pt, done); 2431 __ delayed()->not1(O2_count, O0); // report (-1^K) to caller 2432 2433 __ BIND(do_card_marks); 2434 gen_write_ref_array_post_barrier(O1_to, O2_count, O3); // store check on O1[0..O2] 2435 2436 __ BIND(done); 2437 inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr, O3, O4); 2438 __ retl(); 2439 __ delayed()->nop(); // return value in 00 2440 2441 return start; 2442 } 2443 2444 2445 // Generate 'unsafe' array copy stub 2446 // Though just as safe as the other stubs, it takes an unscaled 2447 // size_t argument instead of an element count. 2448 // 2449 // Arguments for generated stub: 2450 // from: O0 2451 // to: O1 2452 // count: O2 byte count, treated as ssize_t, can be zero 2453 // 2454 // Examines the alignment of the operands and dispatches 2455 // to a long, int, short, or byte copy loop. 2456 // 2457 address generate_unsafe_copy(const char* name) { 2458 2459 const Register O0_from = O0; // source array address 2460 const Register O1_to = O1; // destination array address 2461 const Register O2_count = O2; // elements count 2462 2463 const Register G1_bits = G1; // test copy of low bits 2464 2465 __ align(CodeEntryAlignment); 2466 StubCodeMark mark(this, "StubRoutines", name); 2467 address start = __ pc(); 2468 2469 // bump this on entry, not on exit: 2470 inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr, G1, G3); 2471 2472 __ or3(O0_from, O1_to, G1_bits); 2473 __ or3(O2_count, G1_bits, G1_bits); 2474 2475 __ btst(BytesPerLong-1, G1_bits); 2476 __ br(Assembler::zero, true, Assembler::pt, 2477 long_copy_entry, relocInfo::runtime_call_type); 2478 // scale the count on the way out: 2479 __ delayed()->srax(O2_count, LogBytesPerLong, O2_count); 2480 2481 __ btst(BytesPerInt-1, G1_bits); 2482 __ br(Assembler::zero, true, Assembler::pt, 2483 int_copy_entry, relocInfo::runtime_call_type); 2484 // scale the count on the way out: 2485 __ delayed()->srax(O2_count, LogBytesPerInt, O2_count); 2486 2487 __ btst(BytesPerShort-1, G1_bits); 2488 __ br(Assembler::zero, true, Assembler::pt, 2489 short_copy_entry, relocInfo::runtime_call_type); 2490 // scale the count on the way out: 2491 __ delayed()->srax(O2_count, LogBytesPerShort, O2_count); 2492 2493 __ br(Assembler::always, false, Assembler::pt, 2494 byte_copy_entry, relocInfo::runtime_call_type); 2495 __ delayed()->nop(); 2496 2497 return start; 2498 } 2499 2500 2501 // Perform range checks on the proposed arraycopy. 2502 // Kills the two temps, but nothing else. 2503 // Also, clean the sign bits of src_pos and dst_pos. 2504 void arraycopy_range_checks(Register src, // source array oop (O0) 2505 Register src_pos, // source position (O1) 2506 Register dst, // destination array oo (O2) 2507 Register dst_pos, // destination position (O3) 2508 Register length, // length of copy (O4) 2509 Register temp1, Register temp2, 2510 Label& L_failed) { 2511 BLOCK_COMMENT("arraycopy_range_checks:"); 2512 2513 // if (src_pos + length > arrayOop(src)->length() ) FAIL; 2514 2515 const Register array_length = temp1; // scratch 2516 const Register end_pos = temp2; // scratch 2517 2518 // Note: This next instruction may be in the delay slot of a branch: 2519 __ add(length, src_pos, end_pos); // src_pos + length 2520 __ lduw(src, arrayOopDesc::length_offset_in_bytes(), array_length); 2521 __ cmp(end_pos, array_length); 2522 __ br(Assembler::greater, false, Assembler::pn, L_failed); 2523 2524 // if (dst_pos + length > arrayOop(dst)->length() ) FAIL; 2525 __ delayed()->add(length, dst_pos, end_pos); // dst_pos + length 2526 __ lduw(dst, arrayOopDesc::length_offset_in_bytes(), array_length); 2527 __ cmp(end_pos, array_length); 2528 __ br(Assembler::greater, false, Assembler::pn, L_failed); 2529 2530 // Have to clean up high 32-bits of 'src_pos' and 'dst_pos'. 2531 // Move with sign extension can be used since they are positive. 2532 __ delayed()->signx(src_pos, src_pos); 2533 __ signx(dst_pos, dst_pos); 2534 2535 BLOCK_COMMENT("arraycopy_range_checks done"); 2536 } 2537 2538 2539 // 2540 // Generate generic array copy stubs 2541 // 2542 // Input: 2543 // O0 - src oop 2544 // O1 - src_pos 2545 // O2 - dst oop 2546 // O3 - dst_pos 2547 // O4 - element count 2548 // 2549 // Output: 2550 // O0 == 0 - success 2551 // O0 == -1 - need to call System.arraycopy 2552 // 2553 address generate_generic_copy(const char *name) { 2554 2555 Label L_failed, L_objArray; 2556 2557 // Input registers 2558 const Register src = O0; // source array oop 2559 const Register src_pos = O1; // source position 2560 const Register dst = O2; // destination array oop 2561 const Register dst_pos = O3; // destination position 2562 const Register length = O4; // elements count 2563 2564 // registers used as temp 2565 const Register G3_src_klass = G3; // source array klass 2566 const Register G4_dst_klass = G4; // destination array klass 2567 const Register G5_lh = G5; // layout handler 2568 const Register O5_temp = O5; 2569 2570 __ align(CodeEntryAlignment); 2571 StubCodeMark mark(this, "StubRoutines", name); 2572 address start = __ pc(); 2573 2574 // bump this on entry, not on exit: 2575 inc_counter_np(SharedRuntime::_generic_array_copy_ctr, G1, G3); 2576 2577 // In principle, the int arguments could be dirty. 2578 //assert_clean_int(src_pos, G1); 2579 //assert_clean_int(dst_pos, G1); 2580 //assert_clean_int(length, G1); 2581 2582 //----------------------------------------------------------------------- 2583 // Assembler stubs will be used for this call to arraycopy 2584 // if the following conditions are met: 2585 // 2586 // (1) src and dst must not be null. 2587 // (2) src_pos must not be negative. 2588 // (3) dst_pos must not be negative. 2589 // (4) length must not be negative. 2590 // (5) src klass and dst klass should be the same and not NULL. 2591 // (6) src and dst should be arrays. 2592 // (7) src_pos + length must not exceed length of src. 2593 // (8) dst_pos + length must not exceed length of dst. 2594 BLOCK_COMMENT("arraycopy initial argument checks"); 2595 2596 // if (src == NULL) return -1; 2597 __ br_null(src, false, Assembler::pn, L_failed); 2598 2599 // if (src_pos < 0) return -1; 2600 __ delayed()->tst(src_pos); 2601 __ br(Assembler::negative, false, Assembler::pn, L_failed); 2602 __ delayed()->nop(); 2603 2604 // if (dst == NULL) return -1; 2605 __ br_null(dst, false, Assembler::pn, L_failed); 2606 2607 // if (dst_pos < 0) return -1; 2608 __ delayed()->tst(dst_pos); 2609 __ br(Assembler::negative, false, Assembler::pn, L_failed); 2610 2611 // if (length < 0) return -1; 2612 __ delayed()->tst(length); 2613 __ br(Assembler::negative, false, Assembler::pn, L_failed); 2614 2615 BLOCK_COMMENT("arraycopy argument klass checks"); 2616 // get src->klass() 2617 if (UseCompressedOops) { 2618 __ delayed()->nop(); // ??? not good 2619 __ load_klass(src, G3_src_klass); 2620 } else { 2621 __ delayed()->ld_ptr(src, oopDesc::klass_offset_in_bytes(), G3_src_klass); 2622 } 2623 2624#ifdef ASSERT 2625 // assert(src->klass() != NULL); 2626 BLOCK_COMMENT("assert klasses not null"); 2627 { Label L_a, L_b; 2628 __ br_notnull(G3_src_klass, false, Assembler::pt, L_b); // it is broken if klass is NULL 2629 __ delayed()->nop(); 2630 __ bind(L_a); 2631 __ stop("broken null klass"); 2632 __ bind(L_b); 2633 __ load_klass(dst, G4_dst_klass); 2634 __ br_null(G4_dst_klass, false, Assembler::pn, L_a); // this would be broken also 2635 __ delayed()->mov(G0, G4_dst_klass); // scribble the temp 2636 BLOCK_COMMENT("assert done"); 2637 } 2638#endif 2639 2640 // Load layout helper 2641 // 2642 // |array_tag| | header_size | element_type | |log2_element_size| 2643 // 32 30 24 16 8 2 0 2644 // 2645 // array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0 2646 // 2647 2648 int lh_offset = klassOopDesc::header_size() * HeapWordSize + 2649 Klass::layout_helper_offset_in_bytes(); 2650 2651 // Load 32-bits signed value. Use br() instruction with it to check icc. 2652 __ lduw(G3_src_klass, lh_offset, G5_lh); 2653 2654 if (UseCompressedOops) { 2655 __ load_klass(dst, G4_dst_klass); 2656 } 2657 // Handle objArrays completely differently... 2658 juint objArray_lh = Klass::array_layout_helper(T_OBJECT); 2659 __ set(objArray_lh, O5_temp); 2660 __ cmp(G5_lh, O5_temp); 2661 __ br(Assembler::equal, false, Assembler::pt, L_objArray); 2662 if (UseCompressedOops) { 2663 __ delayed()->nop(); 2664 } else { 2665 __ delayed()->ld_ptr(dst, oopDesc::klass_offset_in_bytes(), G4_dst_klass); 2666 } 2667 2668 // if (src->klass() != dst->klass()) return -1; 2669 __ cmp(G3_src_klass, G4_dst_klass); 2670 __ brx(Assembler::notEqual, false, Assembler::pn, L_failed); 2671 __ delayed()->nop(); 2672 2673 // if (!src->is_Array()) return -1; 2674 __ cmp(G5_lh, Klass::_lh_neutral_value); // < 0 2675 __ br(Assembler::greaterEqual, false, Assembler::pn, L_failed); 2676 2677 // At this point, it is known to be a typeArray (array_tag 0x3). 2678#ifdef ASSERT 2679 __ delayed()->nop(); 2680 { Label L; 2681 jint lh_prim_tag_in_place = (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift); 2682 __ set(lh_prim_tag_in_place, O5_temp); 2683 __ cmp(G5_lh, O5_temp); 2684 __ br(Assembler::greaterEqual, false, Assembler::pt, L); 2685 __ delayed()->nop(); 2686 __ stop("must be a primitive array"); 2687 __ bind(L); 2688 } 2689#else 2690 __ delayed(); // match next insn to prev branch 2691#endif 2692 2693 arraycopy_range_checks(src, src_pos, dst, dst_pos, length, 2694 O5_temp, G4_dst_klass, L_failed); 2695 2696 // typeArrayKlass 2697 // 2698 // src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize); 2699 // dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize); 2700 // 2701 2702 const Register G4_offset = G4_dst_klass; // array offset 2703 const Register G3_elsize = G3_src_klass; // log2 element size 2704 2705 __ srl(G5_lh, Klass::_lh_header_size_shift, G4_offset); 2706 __ and3(G4_offset, Klass::_lh_header_size_mask, G4_offset); // array_offset 2707 __ add(src, G4_offset, src); // src array offset 2708 __ add(dst, G4_offset, dst); // dst array offset 2709 __ and3(G5_lh, Klass::_lh_log2_element_size_mask, G3_elsize); // log2 element size 2710 2711 // next registers should be set before the jump to corresponding stub 2712 const Register from = O0; // source array address 2713 const Register to = O1; // destination array address 2714 const Register count = O2; // elements count 2715 2716 // 'from', 'to', 'count' registers should be set in this order 2717 // since they are the same as 'src', 'src_pos', 'dst'. 2718 2719 BLOCK_COMMENT("scale indexes to element size"); 2720 __ sll_ptr(src_pos, G3_elsize, src_pos); 2721 __ sll_ptr(dst_pos, G3_elsize, dst_pos); 2722 __ add(src, src_pos, from); // src_addr 2723 __ add(dst, dst_pos, to); // dst_addr 2724 2725 BLOCK_COMMENT("choose copy loop based on element size"); 2726 __ cmp(G3_elsize, 0); 2727 __ br(Assembler::equal,true,Assembler::pt,StubRoutines::_jbyte_arraycopy); 2728 __ delayed()->signx(length, count); // length 2729 2730 __ cmp(G3_elsize, LogBytesPerShort); 2731 __ br(Assembler::equal,true,Assembler::pt,StubRoutines::_jshort_arraycopy); 2732 __ delayed()->signx(length, count); // length 2733 2734 __ cmp(G3_elsize, LogBytesPerInt); 2735 __ br(Assembler::equal,true,Assembler::pt,StubRoutines::_jint_arraycopy); 2736 __ delayed()->signx(length, count); // length 2737#ifdef ASSERT 2738 { Label L; 2739 __ cmp(G3_elsize, LogBytesPerLong); 2740 __ br(Assembler::equal, false, Assembler::pt, L); 2741 __ delayed()->nop(); 2742 __ stop("must be long copy, but elsize is wrong"); 2743 __ bind(L); 2744 } 2745#endif 2746 __ br(Assembler::always,false,Assembler::pt,StubRoutines::_jlong_arraycopy); 2747 __ delayed()->signx(length, count); // length 2748 2749 // objArrayKlass 2750 __ BIND(L_objArray); 2751 // live at this point: G3_src_klass, G4_dst_klass, src[_pos], dst[_pos], length 2752 2753 Label L_plain_copy, L_checkcast_copy; 2754 // test array classes for subtyping 2755 __ cmp(G3_src_klass, G4_dst_klass); // usual case is exact equality 2756 __ brx(Assembler::notEqual, true, Assembler::pn, L_checkcast_copy); 2757 __ delayed()->lduw(G4_dst_klass, lh_offset, O5_temp); // hoisted from below 2758 2759 // Identically typed arrays can be copied without element-wise checks. 2760 arraycopy_range_checks(src, src_pos, dst, dst_pos, length, 2761 O5_temp, G5_lh, L_failed); 2762 2763 __ add(src, arrayOopDesc::base_offset_in_bytes(T_OBJECT), src); //src offset 2764 __ add(dst, arrayOopDesc::base_offset_in_bytes(T_OBJECT), dst); //dst offset 2765 __ sll_ptr(src_pos, LogBytesPerHeapOop, src_pos); 2766 __ sll_ptr(dst_pos, LogBytesPerHeapOop, dst_pos); 2767 __ add(src, src_pos, from); // src_addr 2768 __ add(dst, dst_pos, to); // dst_addr 2769 __ BIND(L_plain_copy); 2770 __ br(Assembler::always, false, Assembler::pt,StubRoutines::_oop_arraycopy); 2771 __ delayed()->signx(length, count); // length 2772 2773 __ BIND(L_checkcast_copy); 2774 // live at this point: G3_src_klass, G4_dst_klass 2775 { 2776 // Before looking at dst.length, make sure dst is also an objArray. 2777 // lduw(G4_dst_klass, lh_offset, O5_temp); // hoisted to delay slot 2778 __ cmp(G5_lh, O5_temp); 2779 __ br(Assembler::notEqual, false, Assembler::pn, L_failed); 2780 2781 // It is safe to examine both src.length and dst.length. 2782 __ delayed(); // match next insn to prev branch 2783 arraycopy_range_checks(src, src_pos, dst, dst_pos, length, 2784 O5_temp, G5_lh, L_failed); 2785 2786 // Marshal the base address arguments now, freeing registers. 2787 __ add(src, arrayOopDesc::base_offset_in_bytes(T_OBJECT), src); //src offset 2788 __ add(dst, arrayOopDesc::base_offset_in_bytes(T_OBJECT), dst); //dst offset 2789 __ sll_ptr(src_pos, LogBytesPerHeapOop, src_pos); 2790 __ sll_ptr(dst_pos, LogBytesPerHeapOop, dst_pos); 2791 __ add(src, src_pos, from); // src_addr 2792 __ add(dst, dst_pos, to); // dst_addr 2793 __ signx(length, count); // length (reloaded) 2794 2795 Register sco_temp = O3; // this register is free now 2796 assert_different_registers(from, to, count, sco_temp, 2797 G4_dst_klass, G3_src_klass); 2798 2799 // Generate the type check. 2800 int sco_offset = (klassOopDesc::header_size() * HeapWordSize + 2801 Klass::super_check_offset_offset_in_bytes()); 2802 __ lduw(G4_dst_klass, sco_offset, sco_temp); 2803 generate_type_check(G3_src_klass, sco_temp, G4_dst_klass, 2804 O5_temp, L_plain_copy); 2805 2806 // Fetch destination element klass from the objArrayKlass header. 2807 int ek_offset = (klassOopDesc::header_size() * HeapWordSize + 2808 objArrayKlass::element_klass_offset_in_bytes()); 2809 2810 // the checkcast_copy loop needs two extra arguments: 2811 __ ld_ptr(G4_dst_klass, ek_offset, O4); // dest elem klass 2812 // lduw(O4, sco_offset, O3); // sco of elem klass 2813 2814 __ br(Assembler::always, false, Assembler::pt, checkcast_copy_entry); 2815 __ delayed()->lduw(O4, sco_offset, O3); 2816 } 2817 2818 __ BIND(L_failed); 2819 __ retl(); 2820 __ delayed()->sub(G0, 1, O0); // return -1 2821 return start; 2822 } 2823 2824 void generate_arraycopy_stubs() { 2825 2826 // Note: the disjoint stubs must be generated first, some of 2827 // the conjoint stubs use them. 2828 StubRoutines::_jbyte_disjoint_arraycopy = generate_disjoint_byte_copy(false, "jbyte_disjoint_arraycopy"); 2829 StubRoutines::_jshort_disjoint_arraycopy = generate_disjoint_short_copy(false, "jshort_disjoint_arraycopy"); 2830 StubRoutines::_jint_disjoint_arraycopy = generate_disjoint_int_copy(false, "jint_disjoint_arraycopy"); 2831 StubRoutines::_jlong_disjoint_arraycopy = generate_disjoint_long_copy(false, "jlong_disjoint_arraycopy"); 2832 StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_oop_copy(false, "oop_disjoint_arraycopy"); 2833 StubRoutines::_arrayof_jbyte_disjoint_arraycopy = generate_disjoint_byte_copy(true, "arrayof_jbyte_disjoint_arraycopy"); 2834 StubRoutines::_arrayof_jshort_disjoint_arraycopy = generate_disjoint_short_copy(true, "arrayof_jshort_disjoint_arraycopy"); 2835 StubRoutines::_arrayof_jint_disjoint_arraycopy = generate_disjoint_int_copy(true, "arrayof_jint_disjoint_arraycopy"); 2836 StubRoutines::_arrayof_jlong_disjoint_arraycopy = generate_disjoint_long_copy(true, "arrayof_jlong_disjoint_arraycopy"); 2837 StubRoutines::_arrayof_oop_disjoint_arraycopy = generate_disjoint_oop_copy(true, "arrayof_oop_disjoint_arraycopy"); 2838 2839 StubRoutines::_jbyte_arraycopy = generate_conjoint_byte_copy(false, "jbyte_arraycopy"); 2840 StubRoutines::_jshort_arraycopy = generate_conjoint_short_copy(false, "jshort_arraycopy"); 2841 StubRoutines::_jint_arraycopy = generate_conjoint_int_copy(false, "jint_arraycopy"); 2842 StubRoutines::_jlong_arraycopy = generate_conjoint_long_copy(false, "jlong_arraycopy"); 2843 StubRoutines::_oop_arraycopy = generate_conjoint_oop_copy(false, "oop_arraycopy"); 2844 StubRoutines::_arrayof_jbyte_arraycopy = generate_conjoint_byte_copy(true, "arrayof_jbyte_arraycopy"); 2845 StubRoutines::_arrayof_jshort_arraycopy = generate_conjoint_short_copy(true, "arrayof_jshort_arraycopy"); 2846#ifdef _LP64 2847 // since sizeof(jint) < sizeof(HeapWord), there's a different flavor: 2848 StubRoutines::_arrayof_jint_arraycopy = generate_conjoint_int_copy(true, "arrayof_jint_arraycopy"); 2849 #else 2850 StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy; 2851#endif 2852 StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy; 2853 StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy; 2854 2855 StubRoutines::_checkcast_arraycopy = generate_checkcast_copy("checkcast_arraycopy"); 2856 StubRoutines::_unsafe_arraycopy = generate_unsafe_copy("unsafe_arraycopy"); 2857 StubRoutines::_generic_arraycopy = generate_generic_copy("generic_arraycopy"); 2858 } 2859 2860 void generate_initial() { 2861 // Generates all stubs and initializes the entry points 2862 2863 //------------------------------------------------------------------------------------------------------------------------ 2864 // entry points that exist in all platforms 2865 // Note: This is code that could be shared among different platforms - however the benefit seems to be smaller than 2866 // the disadvantage of having a much more complicated generator structure. See also comment in stubRoutines.hpp. 2867 StubRoutines::_forward_exception_entry = generate_forward_exception(); 2868 2869 StubRoutines::_call_stub_entry = generate_call_stub(StubRoutines::_call_stub_return_address); 2870 StubRoutines::_catch_exception_entry = generate_catch_exception(); 2871 2872 //------------------------------------------------------------------------------------------------------------------------ 2873 // entry points that are platform specific 2874 StubRoutines::Sparc::_test_stop_entry = generate_test_stop(); 2875 2876 StubRoutines::Sparc::_stop_subroutine_entry = generate_stop_subroutine(); 2877 StubRoutines::Sparc::_flush_callers_register_windows_entry = generate_flush_callers_register_windows(); 2878 2879#if !defined(COMPILER2) && !defined(_LP64) 2880 StubRoutines::_atomic_xchg_entry = generate_atomic_xchg(); 2881 StubRoutines::_atomic_cmpxchg_entry = generate_atomic_cmpxchg(); 2882 StubRoutines::_atomic_add_entry = generate_atomic_add(); 2883 StubRoutines::_atomic_xchg_ptr_entry = StubRoutines::_atomic_xchg_entry; 2884 StubRoutines::_atomic_cmpxchg_ptr_entry = StubRoutines::_atomic_cmpxchg_entry; 2885 StubRoutines::_atomic_cmpxchg_long_entry = generate_atomic_cmpxchg_long(); 2886 StubRoutines::_atomic_add_ptr_entry = StubRoutines::_atomic_add_entry; 2887#endif // COMPILER2 !=> _LP64 2888 } 2889 2890 2891 void generate_all() { 2892 // Generates all stubs and initializes the entry points 2893 2894 // Generate partial_subtype_check first here since its code depends on 2895 // UseZeroBaseCompressedOops which is defined after heap initialization. 2896 StubRoutines::Sparc::_partial_subtype_check = generate_partial_subtype_check(); 2897 // These entry points require SharedInfo::stack0 to be set up in non-core builds 2898 StubRoutines::_throw_AbstractMethodError_entry = generate_throw_exception("AbstractMethodError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_AbstractMethodError), false); 2899 StubRoutines::_throw_IncompatibleClassChangeError_entry= generate_throw_exception("IncompatibleClassChangeError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_IncompatibleClassChangeError), false); 2900 StubRoutines::_throw_ArithmeticException_entry = generate_throw_exception("ArithmeticException throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_ArithmeticException), true); 2901 StubRoutines::_throw_NullPointerException_entry = generate_throw_exception("NullPointerException throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_NullPointerException), true); 2902 StubRoutines::_throw_NullPointerException_at_call_entry= generate_throw_exception("NullPointerException at call throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_NullPointerException_at_call), false); 2903 StubRoutines::_throw_StackOverflowError_entry = generate_throw_exception("StackOverflowError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_StackOverflowError), false); 2904 2905 StubRoutines::_handler_for_unsafe_access_entry = 2906 generate_handler_for_unsafe_access(); 2907 2908 // support for verify_oop (must happen after universe_init) 2909 StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop_subroutine(); 2910 2911 // arraycopy stubs used by compilers 2912 generate_arraycopy_stubs(); 2913 2914 // generic method handle stubs 2915 if (EnableMethodHandles && SystemDictionary::MethodHandle_klass() != NULL) { 2916 for (MethodHandles::EntryKind ek = MethodHandles::_EK_FIRST; 2917 ek < MethodHandles::_EK_LIMIT; 2918 ek = MethodHandles::EntryKind(1 + (int)ek)) { 2919 StubCodeMark mark(this, "MethodHandle", MethodHandles::entry_name(ek)); 2920 MethodHandles::generate_method_handle_stub(_masm, ek); 2921 } 2922 } 2923 2924 // Don't initialize the platform math functions since sparc 2925 // doesn't have intrinsics for these operations. 2926 } 2927 2928 2929 public: 2930 StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) { 2931 // replace the standard masm with a special one: 2932 _masm = new MacroAssembler(code); 2933 2934 _stub_count = !all ? 0x100 : 0x200; 2935 if (all) { 2936 generate_all(); 2937 } else { 2938 generate_initial(); 2939 } 2940 2941 // make sure this stub is available for all local calls 2942 if (_atomic_add_stub.is_unbound()) { 2943 // generate a second time, if necessary 2944 (void) generate_atomic_add(); 2945 } 2946 } 2947 2948 2949 private: 2950 int _stub_count; 2951 void stub_prolog(StubCodeDesc* cdesc) { 2952 # ifdef ASSERT 2953 // put extra information in the stub code, to make it more readable 2954#ifdef _LP64 2955// Write the high part of the address 2956// [RGV] Check if there is a dependency on the size of this prolog 2957 __ emit_data((intptr_t)cdesc >> 32, relocInfo::none); 2958#endif 2959 __ emit_data((intptr_t)cdesc, relocInfo::none); 2960 __ emit_data(++_stub_count, relocInfo::none); 2961 # endif 2962 align(true); 2963 } 2964 2965 void align(bool at_header = false) { 2966 // %%%%% move this constant somewhere else 2967 // UltraSPARC cache line size is 8 instructions: 2968 const unsigned int icache_line_size = 32; 2969 const unsigned int icache_half_line_size = 16; 2970 2971 if (at_header) { 2972 while ((intptr_t)(__ pc()) % icache_line_size != 0) { 2973 __ emit_data(0, relocInfo::none); 2974 } 2975 } else { 2976 while ((intptr_t)(__ pc()) % icache_half_line_size != 0) { 2977 __ nop(); 2978 } 2979 } 2980 } 2981 2982}; // end class declaration 2983 2984 2985address StubGenerator::disjoint_byte_copy_entry = NULL; 2986address StubGenerator::disjoint_short_copy_entry = NULL; 2987address StubGenerator::disjoint_int_copy_entry = NULL; 2988address StubGenerator::disjoint_long_copy_entry = NULL; 2989address StubGenerator::disjoint_oop_copy_entry = NULL; 2990 2991address StubGenerator::byte_copy_entry = NULL; 2992address StubGenerator::short_copy_entry = NULL; 2993address StubGenerator::int_copy_entry = NULL; 2994address StubGenerator::long_copy_entry = NULL; 2995address StubGenerator::oop_copy_entry = NULL; 2996 2997address StubGenerator::checkcast_copy_entry = NULL; 2998 2999void StubGenerator_generate(CodeBuffer* code, bool all) { 3000 StubGenerator g(code, all); 3001} 3002