stubGenerator_x86_64.cpp revision 3602:da91efe96a93
1/* 2 * Copyright (c) 2003, 2012, Oracle and/or its affiliates. All rights reserved. 3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4 * 5 * This code is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 only, as 7 * published by the Free Software Foundation. 8 * 9 * This code is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 12 * version 2 for more details (a copy is included in the LICENSE file that 13 * accompanied this code). 14 * 15 * You should have received a copy of the GNU General Public License version 16 * 2 along with this work; if not, write to the Free Software Foundation, 17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 18 * 19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 20 * or visit www.oracle.com if you need additional information or have any 21 * questions. 22 * 23 */ 24 25#include "precompiled.hpp" 26#include "asm/assembler.hpp" 27#include "assembler_x86.inline.hpp" 28#include "interpreter/interpreter.hpp" 29#include "nativeInst_x86.hpp" 30#include "oops/instanceOop.hpp" 31#include "oops/method.hpp" 32#include "oops/objArrayKlass.hpp" 33#include "oops/oop.inline.hpp" 34#include "prims/methodHandles.hpp" 35#include "runtime/frame.inline.hpp" 36#include "runtime/handles.inline.hpp" 37#include "runtime/sharedRuntime.hpp" 38#include "runtime/stubCodeGenerator.hpp" 39#include "runtime/stubRoutines.hpp" 40#include "utilities/top.hpp" 41#ifdef TARGET_OS_FAMILY_linux 42# include "thread_linux.inline.hpp" 43#endif 44#ifdef TARGET_OS_FAMILY_solaris 45# include "thread_solaris.inline.hpp" 46#endif 47#ifdef TARGET_OS_FAMILY_windows 48# include "thread_windows.inline.hpp" 49#endif 50#ifdef TARGET_OS_FAMILY_bsd 51# include "thread_bsd.inline.hpp" 52#endif 53#ifdef COMPILER2 54#include "opto/runtime.hpp" 55#endif 56 57// Declaration and definition of StubGenerator (no .hpp file). 58// For a more detailed description of the stub routine structure 59// see the comment in stubRoutines.hpp 60 61#define __ _masm-> 62#define TIMES_OOP (UseCompressedOops ? Address::times_4 : Address::times_8) 63#define a__ ((Assembler*)_masm)-> 64 65#ifdef PRODUCT 66#define BLOCK_COMMENT(str) /* nothing */ 67#else 68#define BLOCK_COMMENT(str) __ block_comment(str) 69#endif 70 71#define BIND(label) bind(label); BLOCK_COMMENT(#label ":") 72const int MXCSR_MASK = 0xFFC0; // Mask out any pending exceptions 73 74// Stub Code definitions 75 76static address handle_unsafe_access() { 77 JavaThread* thread = JavaThread::current(); 78 address pc = thread->saved_exception_pc(); 79 // pc is the instruction which we must emulate 80 // doing a no-op is fine: return garbage from the load 81 // therefore, compute npc 82 address npc = Assembler::locate_next_instruction(pc); 83 84 // request an async exception 85 thread->set_pending_unsafe_access_error(); 86 87 // return address of next instruction to execute 88 return npc; 89} 90 91class StubGenerator: public StubCodeGenerator { 92 private: 93 94#ifdef PRODUCT 95#define inc_counter_np(counter) (0) 96#else 97 void inc_counter_np_(int& counter) { 98 // This can destroy rscratch1 if counter is far from the code cache 99 __ incrementl(ExternalAddress((address)&counter)); 100 } 101#define inc_counter_np(counter) \ 102 BLOCK_COMMENT("inc_counter " #counter); \ 103 inc_counter_np_(counter); 104#endif 105 106 // Call stubs are used to call Java from C 107 // 108 // Linux Arguments: 109 // c_rarg0: call wrapper address address 110 // c_rarg1: result address 111 // c_rarg2: result type BasicType 112 // c_rarg3: method Method* 113 // c_rarg4: (interpreter) entry point address 114 // c_rarg5: parameters intptr_t* 115 // 16(rbp): parameter size (in words) int 116 // 24(rbp): thread Thread* 117 // 118 // [ return_from_Java ] <--- rsp 119 // [ argument word n ] 120 // ... 121 // -12 [ argument word 1 ] 122 // -11 [ saved r15 ] <--- rsp_after_call 123 // -10 [ saved r14 ] 124 // -9 [ saved r13 ] 125 // -8 [ saved r12 ] 126 // -7 [ saved rbx ] 127 // -6 [ call wrapper ] 128 // -5 [ result ] 129 // -4 [ result type ] 130 // -3 [ method ] 131 // -2 [ entry point ] 132 // -1 [ parameters ] 133 // 0 [ saved rbp ] <--- rbp 134 // 1 [ return address ] 135 // 2 [ parameter size ] 136 // 3 [ thread ] 137 // 138 // Windows Arguments: 139 // c_rarg0: call wrapper address address 140 // c_rarg1: result address 141 // c_rarg2: result type BasicType 142 // c_rarg3: method Method* 143 // 48(rbp): (interpreter) entry point address 144 // 56(rbp): parameters intptr_t* 145 // 64(rbp): parameter size (in words) int 146 // 72(rbp): thread Thread* 147 // 148 // [ return_from_Java ] <--- rsp 149 // [ argument word n ] 150 // ... 151 // -28 [ argument word 1 ] 152 // -27 [ saved xmm15 ] <--- rsp_after_call 153 // [ saved xmm7-xmm14 ] 154 // -9 [ saved xmm6 ] (each xmm register takes 2 slots) 155 // -7 [ saved r15 ] 156 // -6 [ saved r14 ] 157 // -5 [ saved r13 ] 158 // -4 [ saved r12 ] 159 // -3 [ saved rdi ] 160 // -2 [ saved rsi ] 161 // -1 [ saved rbx ] 162 // 0 [ saved rbp ] <--- rbp 163 // 1 [ return address ] 164 // 2 [ call wrapper ] 165 // 3 [ result ] 166 // 4 [ result type ] 167 // 5 [ method ] 168 // 6 [ entry point ] 169 // 7 [ parameters ] 170 // 8 [ parameter size ] 171 // 9 [ thread ] 172 // 173 // Windows reserves the callers stack space for arguments 1-4. 174 // We spill c_rarg0-c_rarg3 to this space. 175 176 // Call stub stack layout word offsets from rbp 177 enum call_stub_layout { 178#ifdef _WIN64 179 xmm_save_first = 6, // save from xmm6 180 xmm_save_last = 15, // to xmm15 181 xmm_save_base = -9, 182 rsp_after_call_off = xmm_save_base - 2 * (xmm_save_last - xmm_save_first), // -27 183 r15_off = -7, 184 r14_off = -6, 185 r13_off = -5, 186 r12_off = -4, 187 rdi_off = -3, 188 rsi_off = -2, 189 rbx_off = -1, 190 rbp_off = 0, 191 retaddr_off = 1, 192 call_wrapper_off = 2, 193 result_off = 3, 194 result_type_off = 4, 195 method_off = 5, 196 entry_point_off = 6, 197 parameters_off = 7, 198 parameter_size_off = 8, 199 thread_off = 9 200#else 201 rsp_after_call_off = -12, 202 mxcsr_off = rsp_after_call_off, 203 r15_off = -11, 204 r14_off = -10, 205 r13_off = -9, 206 r12_off = -8, 207 rbx_off = -7, 208 call_wrapper_off = -6, 209 result_off = -5, 210 result_type_off = -4, 211 method_off = -3, 212 entry_point_off = -2, 213 parameters_off = -1, 214 rbp_off = 0, 215 retaddr_off = 1, 216 parameter_size_off = 2, 217 thread_off = 3 218#endif 219 }; 220 221#ifdef _WIN64 222 Address xmm_save(int reg) { 223 assert(reg >= xmm_save_first && reg <= xmm_save_last, "XMM register number out of range"); 224 return Address(rbp, (xmm_save_base - (reg - xmm_save_first) * 2) * wordSize); 225 } 226#endif 227 228 address generate_call_stub(address& return_address) { 229 assert((int)frame::entry_frame_after_call_words == -(int)rsp_after_call_off + 1 && 230 (int)frame::entry_frame_call_wrapper_offset == (int)call_wrapper_off, 231 "adjust this code"); 232 StubCodeMark mark(this, "StubRoutines", "call_stub"); 233 address start = __ pc(); 234 235 // same as in generate_catch_exception()! 236 const Address rsp_after_call(rbp, rsp_after_call_off * wordSize); 237 238 const Address call_wrapper (rbp, call_wrapper_off * wordSize); 239 const Address result (rbp, result_off * wordSize); 240 const Address result_type (rbp, result_type_off * wordSize); 241 const Address method (rbp, method_off * wordSize); 242 const Address entry_point (rbp, entry_point_off * wordSize); 243 const Address parameters (rbp, parameters_off * wordSize); 244 const Address parameter_size(rbp, parameter_size_off * wordSize); 245 246 // same as in generate_catch_exception()! 247 const Address thread (rbp, thread_off * wordSize); 248 249 const Address r15_save(rbp, r15_off * wordSize); 250 const Address r14_save(rbp, r14_off * wordSize); 251 const Address r13_save(rbp, r13_off * wordSize); 252 const Address r12_save(rbp, r12_off * wordSize); 253 const Address rbx_save(rbp, rbx_off * wordSize); 254 255 // stub code 256 __ enter(); 257 __ subptr(rsp, -rsp_after_call_off * wordSize); 258 259 // save register parameters 260#ifndef _WIN64 261 __ movptr(parameters, c_rarg5); // parameters 262 __ movptr(entry_point, c_rarg4); // entry_point 263#endif 264 265 __ movptr(method, c_rarg3); // method 266 __ movl(result_type, c_rarg2); // result type 267 __ movptr(result, c_rarg1); // result 268 __ movptr(call_wrapper, c_rarg0); // call wrapper 269 270 // save regs belonging to calling function 271 __ movptr(rbx_save, rbx); 272 __ movptr(r12_save, r12); 273 __ movptr(r13_save, r13); 274 __ movptr(r14_save, r14); 275 __ movptr(r15_save, r15); 276#ifdef _WIN64 277 for (int i = 6; i <= 15; i++) { 278 __ movdqu(xmm_save(i), as_XMMRegister(i)); 279 } 280 281 const Address rdi_save(rbp, rdi_off * wordSize); 282 const Address rsi_save(rbp, rsi_off * wordSize); 283 284 __ movptr(rsi_save, rsi); 285 __ movptr(rdi_save, rdi); 286#else 287 const Address mxcsr_save(rbp, mxcsr_off * wordSize); 288 { 289 Label skip_ldmx; 290 __ stmxcsr(mxcsr_save); 291 __ movl(rax, mxcsr_save); 292 __ andl(rax, MXCSR_MASK); // Only check control and mask bits 293 ExternalAddress mxcsr_std(StubRoutines::x86::mxcsr_std()); 294 __ cmp32(rax, mxcsr_std); 295 __ jcc(Assembler::equal, skip_ldmx); 296 __ ldmxcsr(mxcsr_std); 297 __ bind(skip_ldmx); 298 } 299#endif 300 301 // Load up thread register 302 __ movptr(r15_thread, thread); 303 __ reinit_heapbase(); 304 305#ifdef ASSERT 306 // make sure we have no pending exceptions 307 { 308 Label L; 309 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 310 __ jcc(Assembler::equal, L); 311 __ stop("StubRoutines::call_stub: entered with pending exception"); 312 __ bind(L); 313 } 314#endif 315 316 // pass parameters if any 317 BLOCK_COMMENT("pass parameters if any"); 318 Label parameters_done; 319 __ movl(c_rarg3, parameter_size); 320 __ testl(c_rarg3, c_rarg3); 321 __ jcc(Assembler::zero, parameters_done); 322 323 Label loop; 324 __ movptr(c_rarg2, parameters); // parameter pointer 325 __ movl(c_rarg1, c_rarg3); // parameter counter is in c_rarg1 326 __ BIND(loop); 327 __ movptr(rax, Address(c_rarg2, 0));// get parameter 328 __ addptr(c_rarg2, wordSize); // advance to next parameter 329 __ decrementl(c_rarg1); // decrement counter 330 __ push(rax); // pass parameter 331 __ jcc(Assembler::notZero, loop); 332 333 // call Java function 334 __ BIND(parameters_done); 335 __ movptr(rbx, method); // get Method* 336 __ movptr(c_rarg1, entry_point); // get entry_point 337 __ mov(r13, rsp); // set sender sp 338 BLOCK_COMMENT("call Java function"); 339 __ call(c_rarg1); 340 341 BLOCK_COMMENT("call_stub_return_address:"); 342 return_address = __ pc(); 343 344 // store result depending on type (everything that is not 345 // T_OBJECT, T_LONG, T_FLOAT or T_DOUBLE is treated as T_INT) 346 __ movptr(c_rarg0, result); 347 Label is_long, is_float, is_double, exit; 348 __ movl(c_rarg1, result_type); 349 __ cmpl(c_rarg1, T_OBJECT); 350 __ jcc(Assembler::equal, is_long); 351 __ cmpl(c_rarg1, T_LONG); 352 __ jcc(Assembler::equal, is_long); 353 __ cmpl(c_rarg1, T_FLOAT); 354 __ jcc(Assembler::equal, is_float); 355 __ cmpl(c_rarg1, T_DOUBLE); 356 __ jcc(Assembler::equal, is_double); 357 358 // handle T_INT case 359 __ movl(Address(c_rarg0, 0), rax); 360 361 __ BIND(exit); 362 363 // pop parameters 364 __ lea(rsp, rsp_after_call); 365 366#ifdef ASSERT 367 // verify that threads correspond 368 { 369 Label L, S; 370 __ cmpptr(r15_thread, thread); 371 __ jcc(Assembler::notEqual, S); 372 __ get_thread(rbx); 373 __ cmpptr(r15_thread, rbx); 374 __ jcc(Assembler::equal, L); 375 __ bind(S); 376 __ jcc(Assembler::equal, L); 377 __ stop("StubRoutines::call_stub: threads must correspond"); 378 __ bind(L); 379 } 380#endif 381 382 // restore regs belonging to calling function 383#ifdef _WIN64 384 for (int i = 15; i >= 6; i--) { 385 __ movdqu(as_XMMRegister(i), xmm_save(i)); 386 } 387#endif 388 __ movptr(r15, r15_save); 389 __ movptr(r14, r14_save); 390 __ movptr(r13, r13_save); 391 __ movptr(r12, r12_save); 392 __ movptr(rbx, rbx_save); 393 394#ifdef _WIN64 395 __ movptr(rdi, rdi_save); 396 __ movptr(rsi, rsi_save); 397#else 398 __ ldmxcsr(mxcsr_save); 399#endif 400 401 // restore rsp 402 __ addptr(rsp, -rsp_after_call_off * wordSize); 403 404 // return 405 __ pop(rbp); 406 __ ret(0); 407 408 // handle return types different from T_INT 409 __ BIND(is_long); 410 __ movq(Address(c_rarg0, 0), rax); 411 __ jmp(exit); 412 413 __ BIND(is_float); 414 __ movflt(Address(c_rarg0, 0), xmm0); 415 __ jmp(exit); 416 417 __ BIND(is_double); 418 __ movdbl(Address(c_rarg0, 0), xmm0); 419 __ jmp(exit); 420 421 return start; 422 } 423 424 // Return point for a Java call if there's an exception thrown in 425 // Java code. The exception is caught and transformed into a 426 // pending exception stored in JavaThread that can be tested from 427 // within the VM. 428 // 429 // Note: Usually the parameters are removed by the callee. In case 430 // of an exception crossing an activation frame boundary, that is 431 // not the case if the callee is compiled code => need to setup the 432 // rsp. 433 // 434 // rax: exception oop 435 436 address generate_catch_exception() { 437 StubCodeMark mark(this, "StubRoutines", "catch_exception"); 438 address start = __ pc(); 439 440 // same as in generate_call_stub(): 441 const Address rsp_after_call(rbp, rsp_after_call_off * wordSize); 442 const Address thread (rbp, thread_off * wordSize); 443 444#ifdef ASSERT 445 // verify that threads correspond 446 { 447 Label L, S; 448 __ cmpptr(r15_thread, thread); 449 __ jcc(Assembler::notEqual, S); 450 __ get_thread(rbx); 451 __ cmpptr(r15_thread, rbx); 452 __ jcc(Assembler::equal, L); 453 __ bind(S); 454 __ stop("StubRoutines::catch_exception: threads must correspond"); 455 __ bind(L); 456 } 457#endif 458 459 // set pending exception 460 __ verify_oop(rax); 461 462 __ movptr(Address(r15_thread, Thread::pending_exception_offset()), rax); 463 __ lea(rscratch1, ExternalAddress((address)__FILE__)); 464 __ movptr(Address(r15_thread, Thread::exception_file_offset()), rscratch1); 465 __ movl(Address(r15_thread, Thread::exception_line_offset()), (int) __LINE__); 466 467 // complete return to VM 468 assert(StubRoutines::_call_stub_return_address != NULL, 469 "_call_stub_return_address must have been generated before"); 470 __ jump(RuntimeAddress(StubRoutines::_call_stub_return_address)); 471 472 return start; 473 } 474 475 // Continuation point for runtime calls returning with a pending 476 // exception. The pending exception check happened in the runtime 477 // or native call stub. The pending exception in Thread is 478 // converted into a Java-level exception. 479 // 480 // Contract with Java-level exception handlers: 481 // rax: exception 482 // rdx: throwing pc 483 // 484 // NOTE: At entry of this stub, exception-pc must be on stack !! 485 486 address generate_forward_exception() { 487 StubCodeMark mark(this, "StubRoutines", "forward exception"); 488 address start = __ pc(); 489 490 // Upon entry, the sp points to the return address returning into 491 // Java (interpreted or compiled) code; i.e., the return address 492 // becomes the throwing pc. 493 // 494 // Arguments pushed before the runtime call are still on the stack 495 // but the exception handler will reset the stack pointer -> 496 // ignore them. A potential result in registers can be ignored as 497 // well. 498 499#ifdef ASSERT 500 // make sure this code is only executed if there is a pending exception 501 { 502 Label L; 503 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t) NULL); 504 __ jcc(Assembler::notEqual, L); 505 __ stop("StubRoutines::forward exception: no pending exception (1)"); 506 __ bind(L); 507 } 508#endif 509 510 // compute exception handler into rbx 511 __ movptr(c_rarg0, Address(rsp, 0)); 512 BLOCK_COMMENT("call exception_handler_for_return_address"); 513 __ call_VM_leaf(CAST_FROM_FN_PTR(address, 514 SharedRuntime::exception_handler_for_return_address), 515 r15_thread, c_rarg0); 516 __ mov(rbx, rax); 517 518 // setup rax & rdx, remove return address & clear pending exception 519 __ pop(rdx); 520 __ movptr(rax, Address(r15_thread, Thread::pending_exception_offset())); 521 __ movptr(Address(r15_thread, Thread::pending_exception_offset()), (int32_t)NULL_WORD); 522 523#ifdef ASSERT 524 // make sure exception is set 525 { 526 Label L; 527 __ testptr(rax, rax); 528 __ jcc(Assembler::notEqual, L); 529 __ stop("StubRoutines::forward exception: no pending exception (2)"); 530 __ bind(L); 531 } 532#endif 533 534 // continue at exception handler (return address removed) 535 // rax: exception 536 // rbx: exception handler 537 // rdx: throwing pc 538 __ verify_oop(rax); 539 __ jmp(rbx); 540 541 return start; 542 } 543 544 // Support for jint atomic::xchg(jint exchange_value, volatile jint* dest) 545 // 546 // Arguments : 547 // c_rarg0: exchange_value 548 // c_rarg0: dest 549 // 550 // Result: 551 // *dest <- ex, return (orig *dest) 552 address generate_atomic_xchg() { 553 StubCodeMark mark(this, "StubRoutines", "atomic_xchg"); 554 address start = __ pc(); 555 556 __ movl(rax, c_rarg0); // Copy to eax we need a return value anyhow 557 __ xchgl(rax, Address(c_rarg1, 0)); // automatic LOCK 558 __ ret(0); 559 560 return start; 561 } 562 563 // Support for intptr_t atomic::xchg_ptr(intptr_t exchange_value, volatile intptr_t* dest) 564 // 565 // Arguments : 566 // c_rarg0: exchange_value 567 // c_rarg1: dest 568 // 569 // Result: 570 // *dest <- ex, return (orig *dest) 571 address generate_atomic_xchg_ptr() { 572 StubCodeMark mark(this, "StubRoutines", "atomic_xchg_ptr"); 573 address start = __ pc(); 574 575 __ movptr(rax, c_rarg0); // Copy to eax we need a return value anyhow 576 __ xchgptr(rax, Address(c_rarg1, 0)); // automatic LOCK 577 __ ret(0); 578 579 return start; 580 } 581 582 // Support for jint atomic::atomic_cmpxchg(jint exchange_value, volatile jint* dest, 583 // jint compare_value) 584 // 585 // Arguments : 586 // c_rarg0: exchange_value 587 // c_rarg1: dest 588 // c_rarg2: compare_value 589 // 590 // Result: 591 // if ( compare_value == *dest ) { 592 // *dest = exchange_value 593 // return compare_value; 594 // else 595 // return *dest; 596 address generate_atomic_cmpxchg() { 597 StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg"); 598 address start = __ pc(); 599 600 __ movl(rax, c_rarg2); 601 if ( os::is_MP() ) __ lock(); 602 __ cmpxchgl(c_rarg0, Address(c_rarg1, 0)); 603 __ ret(0); 604 605 return start; 606 } 607 608 // Support for jint atomic::atomic_cmpxchg_long(jlong exchange_value, 609 // volatile jlong* dest, 610 // jlong compare_value) 611 // Arguments : 612 // c_rarg0: exchange_value 613 // c_rarg1: dest 614 // c_rarg2: compare_value 615 // 616 // Result: 617 // if ( compare_value == *dest ) { 618 // *dest = exchange_value 619 // return compare_value; 620 // else 621 // return *dest; 622 address generate_atomic_cmpxchg_long() { 623 StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg_long"); 624 address start = __ pc(); 625 626 __ movq(rax, c_rarg2); 627 if ( os::is_MP() ) __ lock(); 628 __ cmpxchgq(c_rarg0, Address(c_rarg1, 0)); 629 __ ret(0); 630 631 return start; 632 } 633 634 // Support for jint atomic::add(jint add_value, volatile jint* dest) 635 // 636 // Arguments : 637 // c_rarg0: add_value 638 // c_rarg1: dest 639 // 640 // Result: 641 // *dest += add_value 642 // return *dest; 643 address generate_atomic_add() { 644 StubCodeMark mark(this, "StubRoutines", "atomic_add"); 645 address start = __ pc(); 646 647 __ movl(rax, c_rarg0); 648 if ( os::is_MP() ) __ lock(); 649 __ xaddl(Address(c_rarg1, 0), c_rarg0); 650 __ addl(rax, c_rarg0); 651 __ ret(0); 652 653 return start; 654 } 655 656 // Support for intptr_t atomic::add_ptr(intptr_t add_value, volatile intptr_t* dest) 657 // 658 // Arguments : 659 // c_rarg0: add_value 660 // c_rarg1: dest 661 // 662 // Result: 663 // *dest += add_value 664 // return *dest; 665 address generate_atomic_add_ptr() { 666 StubCodeMark mark(this, "StubRoutines", "atomic_add_ptr"); 667 address start = __ pc(); 668 669 __ movptr(rax, c_rarg0); // Copy to eax we need a return value anyhow 670 if ( os::is_MP() ) __ lock(); 671 __ xaddptr(Address(c_rarg1, 0), c_rarg0); 672 __ addptr(rax, c_rarg0); 673 __ ret(0); 674 675 return start; 676 } 677 678 // Support for intptr_t OrderAccess::fence() 679 // 680 // Arguments : 681 // 682 // Result: 683 address generate_orderaccess_fence() { 684 StubCodeMark mark(this, "StubRoutines", "orderaccess_fence"); 685 address start = __ pc(); 686 __ membar(Assembler::StoreLoad); 687 __ ret(0); 688 689 return start; 690 } 691 692 // Support for intptr_t get_previous_fp() 693 // 694 // This routine is used to find the previous frame pointer for the 695 // caller (current_frame_guess). This is used as part of debugging 696 // ps() is seemingly lost trying to find frames. 697 // This code assumes that caller current_frame_guess) has a frame. 698 address generate_get_previous_fp() { 699 StubCodeMark mark(this, "StubRoutines", "get_previous_fp"); 700 const Address old_fp(rbp, 0); 701 const Address older_fp(rax, 0); 702 address start = __ pc(); 703 704 __ enter(); 705 __ movptr(rax, old_fp); // callers fp 706 __ movptr(rax, older_fp); // the frame for ps() 707 __ pop(rbp); 708 __ ret(0); 709 710 return start; 711 } 712 713 // Support for intptr_t get_previous_sp() 714 // 715 // This routine is used to find the previous stack pointer for the 716 // caller. 717 address generate_get_previous_sp() { 718 StubCodeMark mark(this, "StubRoutines", "get_previous_sp"); 719 address start = __ pc(); 720 721 __ movptr(rax, rsp); 722 __ addptr(rax, 8); // return address is at the top of the stack. 723 __ ret(0); 724 725 return start; 726 } 727 728 //---------------------------------------------------------------------------------------------------- 729 // Support for void verify_mxcsr() 730 // 731 // This routine is used with -Xcheck:jni to verify that native 732 // JNI code does not return to Java code without restoring the 733 // MXCSR register to our expected state. 734 735 address generate_verify_mxcsr() { 736 StubCodeMark mark(this, "StubRoutines", "verify_mxcsr"); 737 address start = __ pc(); 738 739 const Address mxcsr_save(rsp, 0); 740 741 if (CheckJNICalls) { 742 Label ok_ret; 743 __ push(rax); 744 __ subptr(rsp, wordSize); // allocate a temp location 745 __ stmxcsr(mxcsr_save); 746 __ movl(rax, mxcsr_save); 747 __ andl(rax, MXCSR_MASK); // Only check control and mask bits 748 __ cmpl(rax, *(int *)(StubRoutines::x86::mxcsr_std())); 749 __ jcc(Assembler::equal, ok_ret); 750 751 __ warn("MXCSR changed by native JNI code, use -XX:+RestoreMXCSROnJNICall"); 752 753 __ ldmxcsr(ExternalAddress(StubRoutines::x86::mxcsr_std())); 754 755 __ bind(ok_ret); 756 __ addptr(rsp, wordSize); 757 __ pop(rax); 758 } 759 760 __ ret(0); 761 762 return start; 763 } 764 765 address generate_f2i_fixup() { 766 StubCodeMark mark(this, "StubRoutines", "f2i_fixup"); 767 Address inout(rsp, 5 * wordSize); // return address + 4 saves 768 769 address start = __ pc(); 770 771 Label L; 772 773 __ push(rax); 774 __ push(c_rarg3); 775 __ push(c_rarg2); 776 __ push(c_rarg1); 777 778 __ movl(rax, 0x7f800000); 779 __ xorl(c_rarg3, c_rarg3); 780 __ movl(c_rarg2, inout); 781 __ movl(c_rarg1, c_rarg2); 782 __ andl(c_rarg1, 0x7fffffff); 783 __ cmpl(rax, c_rarg1); // NaN? -> 0 784 __ jcc(Assembler::negative, L); 785 __ testl(c_rarg2, c_rarg2); // signed ? min_jint : max_jint 786 __ movl(c_rarg3, 0x80000000); 787 __ movl(rax, 0x7fffffff); 788 __ cmovl(Assembler::positive, c_rarg3, rax); 789 790 __ bind(L); 791 __ movptr(inout, c_rarg3); 792 793 __ pop(c_rarg1); 794 __ pop(c_rarg2); 795 __ pop(c_rarg3); 796 __ pop(rax); 797 798 __ ret(0); 799 800 return start; 801 } 802 803 address generate_f2l_fixup() { 804 StubCodeMark mark(this, "StubRoutines", "f2l_fixup"); 805 Address inout(rsp, 5 * wordSize); // return address + 4 saves 806 address start = __ pc(); 807 808 Label L; 809 810 __ push(rax); 811 __ push(c_rarg3); 812 __ push(c_rarg2); 813 __ push(c_rarg1); 814 815 __ movl(rax, 0x7f800000); 816 __ xorl(c_rarg3, c_rarg3); 817 __ movl(c_rarg2, inout); 818 __ movl(c_rarg1, c_rarg2); 819 __ andl(c_rarg1, 0x7fffffff); 820 __ cmpl(rax, c_rarg1); // NaN? -> 0 821 __ jcc(Assembler::negative, L); 822 __ testl(c_rarg2, c_rarg2); // signed ? min_jlong : max_jlong 823 __ mov64(c_rarg3, 0x8000000000000000); 824 __ mov64(rax, 0x7fffffffffffffff); 825 __ cmov(Assembler::positive, c_rarg3, rax); 826 827 __ bind(L); 828 __ movptr(inout, c_rarg3); 829 830 __ pop(c_rarg1); 831 __ pop(c_rarg2); 832 __ pop(c_rarg3); 833 __ pop(rax); 834 835 __ ret(0); 836 837 return start; 838 } 839 840 address generate_d2i_fixup() { 841 StubCodeMark mark(this, "StubRoutines", "d2i_fixup"); 842 Address inout(rsp, 6 * wordSize); // return address + 5 saves 843 844 address start = __ pc(); 845 846 Label L; 847 848 __ push(rax); 849 __ push(c_rarg3); 850 __ push(c_rarg2); 851 __ push(c_rarg1); 852 __ push(c_rarg0); 853 854 __ movl(rax, 0x7ff00000); 855 __ movq(c_rarg2, inout); 856 __ movl(c_rarg3, c_rarg2); 857 __ mov(c_rarg1, c_rarg2); 858 __ mov(c_rarg0, c_rarg2); 859 __ negl(c_rarg3); 860 __ shrptr(c_rarg1, 0x20); 861 __ orl(c_rarg3, c_rarg2); 862 __ andl(c_rarg1, 0x7fffffff); 863 __ xorl(c_rarg2, c_rarg2); 864 __ shrl(c_rarg3, 0x1f); 865 __ orl(c_rarg1, c_rarg3); 866 __ cmpl(rax, c_rarg1); 867 __ jcc(Assembler::negative, L); // NaN -> 0 868 __ testptr(c_rarg0, c_rarg0); // signed ? min_jint : max_jint 869 __ movl(c_rarg2, 0x80000000); 870 __ movl(rax, 0x7fffffff); 871 __ cmov(Assembler::positive, c_rarg2, rax); 872 873 __ bind(L); 874 __ movptr(inout, c_rarg2); 875 876 __ pop(c_rarg0); 877 __ pop(c_rarg1); 878 __ pop(c_rarg2); 879 __ pop(c_rarg3); 880 __ pop(rax); 881 882 __ ret(0); 883 884 return start; 885 } 886 887 address generate_d2l_fixup() { 888 StubCodeMark mark(this, "StubRoutines", "d2l_fixup"); 889 Address inout(rsp, 6 * wordSize); // return address + 5 saves 890 891 address start = __ pc(); 892 893 Label L; 894 895 __ push(rax); 896 __ push(c_rarg3); 897 __ push(c_rarg2); 898 __ push(c_rarg1); 899 __ push(c_rarg0); 900 901 __ movl(rax, 0x7ff00000); 902 __ movq(c_rarg2, inout); 903 __ movl(c_rarg3, c_rarg2); 904 __ mov(c_rarg1, c_rarg2); 905 __ mov(c_rarg0, c_rarg2); 906 __ negl(c_rarg3); 907 __ shrptr(c_rarg1, 0x20); 908 __ orl(c_rarg3, c_rarg2); 909 __ andl(c_rarg1, 0x7fffffff); 910 __ xorl(c_rarg2, c_rarg2); 911 __ shrl(c_rarg3, 0x1f); 912 __ orl(c_rarg1, c_rarg3); 913 __ cmpl(rax, c_rarg1); 914 __ jcc(Assembler::negative, L); // NaN -> 0 915 __ testq(c_rarg0, c_rarg0); // signed ? min_jlong : max_jlong 916 __ mov64(c_rarg2, 0x8000000000000000); 917 __ mov64(rax, 0x7fffffffffffffff); 918 __ cmovq(Assembler::positive, c_rarg2, rax); 919 920 __ bind(L); 921 __ movq(inout, c_rarg2); 922 923 __ pop(c_rarg0); 924 __ pop(c_rarg1); 925 __ pop(c_rarg2); 926 __ pop(c_rarg3); 927 __ pop(rax); 928 929 __ ret(0); 930 931 return start; 932 } 933 934 address generate_fp_mask(const char *stub_name, int64_t mask) { 935 __ align(CodeEntryAlignment); 936 StubCodeMark mark(this, "StubRoutines", stub_name); 937 address start = __ pc(); 938 939 __ emit_data64( mask, relocInfo::none ); 940 __ emit_data64( mask, relocInfo::none ); 941 942 return start; 943 } 944 945 // The following routine generates a subroutine to throw an 946 // asynchronous UnknownError when an unsafe access gets a fault that 947 // could not be reasonably prevented by the programmer. (Example: 948 // SIGBUS/OBJERR.) 949 address generate_handler_for_unsafe_access() { 950 StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access"); 951 address start = __ pc(); 952 953 __ push(0); // hole for return address-to-be 954 __ pusha(); // push registers 955 Address next_pc(rsp, RegisterImpl::number_of_registers * BytesPerWord); 956 957 // FIXME: this probably needs alignment logic 958 959 __ subptr(rsp, frame::arg_reg_save_area_bytes); 960 BLOCK_COMMENT("call handle_unsafe_access"); 961 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, handle_unsafe_access))); 962 __ addptr(rsp, frame::arg_reg_save_area_bytes); 963 964 __ movptr(next_pc, rax); // stuff next address 965 __ popa(); 966 __ ret(0); // jump to next address 967 968 return start; 969 } 970 971 // Non-destructive plausibility checks for oops 972 // 973 // Arguments: 974 // all args on stack! 975 // 976 // Stack after saving c_rarg3: 977 // [tos + 0]: saved c_rarg3 978 // [tos + 1]: saved c_rarg2 979 // [tos + 2]: saved r12 (several TemplateTable methods use it) 980 // [tos + 3]: saved flags 981 // [tos + 4]: return address 982 // * [tos + 5]: error message (char*) 983 // * [tos + 6]: object to verify (oop) 984 // * [tos + 7]: saved rax - saved by caller and bashed 985 // * [tos + 8]: saved r10 (rscratch1) - saved by caller 986 // * = popped on exit 987 address generate_verify_oop() { 988 StubCodeMark mark(this, "StubRoutines", "verify_oop"); 989 address start = __ pc(); 990 991 Label exit, error; 992 993 __ pushf(); 994 __ incrementl(ExternalAddress((address) StubRoutines::verify_oop_count_addr())); 995 996 __ push(r12); 997 998 // save c_rarg2 and c_rarg3 999 __ push(c_rarg2); 1000 __ push(c_rarg3); 1001 1002 enum { 1003 // After previous pushes. 1004 oop_to_verify = 6 * wordSize, 1005 saved_rax = 7 * wordSize, 1006 saved_r10 = 8 * wordSize, 1007 1008 // Before the call to MacroAssembler::debug(), see below. 1009 return_addr = 16 * wordSize, 1010 error_msg = 17 * wordSize 1011 }; 1012 1013 // get object 1014 __ movptr(rax, Address(rsp, oop_to_verify)); 1015 1016 // make sure object is 'reasonable' 1017 __ testptr(rax, rax); 1018 __ jcc(Assembler::zero, exit); // if obj is NULL it is OK 1019 // Check if the oop is in the right area of memory 1020 __ movptr(c_rarg2, rax); 1021 __ movptr(c_rarg3, (intptr_t) Universe::verify_oop_mask()); 1022 __ andptr(c_rarg2, c_rarg3); 1023 __ movptr(c_rarg3, (intptr_t) Universe::verify_oop_bits()); 1024 __ cmpptr(c_rarg2, c_rarg3); 1025 __ jcc(Assembler::notZero, error); 1026 1027 // set r12 to heapbase for load_klass() 1028 __ reinit_heapbase(); 1029 1030 // make sure klass is 'reasonable', which is not zero. 1031 __ load_klass(rax, rax); // get klass 1032 __ testptr(rax, rax); 1033 __ jcc(Assembler::zero, error); // if klass is NULL it is broken 1034 // TODO: Future assert that klass is lower 4g memory for UseCompressedKlassPointers 1035 1036 // return if everything seems ok 1037 __ bind(exit); 1038 __ movptr(rax, Address(rsp, saved_rax)); // get saved rax back 1039 __ movptr(rscratch1, Address(rsp, saved_r10)); // get saved r10 back 1040 __ pop(c_rarg3); // restore c_rarg3 1041 __ pop(c_rarg2); // restore c_rarg2 1042 __ pop(r12); // restore r12 1043 __ popf(); // restore flags 1044 __ ret(4 * wordSize); // pop caller saved stuff 1045 1046 // handle errors 1047 __ bind(error); 1048 __ movptr(rax, Address(rsp, saved_rax)); // get saved rax back 1049 __ movptr(rscratch1, Address(rsp, saved_r10)); // get saved r10 back 1050 __ pop(c_rarg3); // get saved c_rarg3 back 1051 __ pop(c_rarg2); // get saved c_rarg2 back 1052 __ pop(r12); // get saved r12 back 1053 __ popf(); // get saved flags off stack -- 1054 // will be ignored 1055 1056 __ pusha(); // push registers 1057 // (rip is already 1058 // already pushed) 1059 // debug(char* msg, int64_t pc, int64_t regs[]) 1060 // We've popped the registers we'd saved (c_rarg3, c_rarg2 and flags), and 1061 // pushed all the registers, so now the stack looks like: 1062 // [tos + 0] 16 saved registers 1063 // [tos + 16] return address 1064 // * [tos + 17] error message (char*) 1065 // * [tos + 18] object to verify (oop) 1066 // * [tos + 19] saved rax - saved by caller and bashed 1067 // * [tos + 20] saved r10 (rscratch1) - saved by caller 1068 // * = popped on exit 1069 1070 __ movptr(c_rarg0, Address(rsp, error_msg)); // pass address of error message 1071 __ movptr(c_rarg1, Address(rsp, return_addr)); // pass return address 1072 __ movq(c_rarg2, rsp); // pass address of regs on stack 1073 __ mov(r12, rsp); // remember rsp 1074 __ subptr(rsp, frame::arg_reg_save_area_bytes); // windows 1075 __ andptr(rsp, -16); // align stack as required by ABI 1076 BLOCK_COMMENT("call MacroAssembler::debug"); 1077 __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, MacroAssembler::debug64))); 1078 __ mov(rsp, r12); // restore rsp 1079 __ popa(); // pop registers (includes r12) 1080 __ ret(4 * wordSize); // pop caller saved stuff 1081 1082 return start; 1083 } 1084 1085 // 1086 // Verify that a register contains clean 32-bits positive value 1087 // (high 32-bits are 0) so it could be used in 64-bits shifts. 1088 // 1089 // Input: 1090 // Rint - 32-bits value 1091 // Rtmp - scratch 1092 // 1093 void assert_clean_int(Register Rint, Register Rtmp) { 1094#ifdef ASSERT 1095 Label L; 1096 assert_different_registers(Rtmp, Rint); 1097 __ movslq(Rtmp, Rint); 1098 __ cmpq(Rtmp, Rint); 1099 __ jcc(Assembler::equal, L); 1100 __ stop("high 32-bits of int value are not 0"); 1101 __ bind(L); 1102#endif 1103 } 1104 1105 // Generate overlap test for array copy stubs 1106 // 1107 // Input: 1108 // c_rarg0 - from 1109 // c_rarg1 - to 1110 // c_rarg2 - element count 1111 // 1112 // Output: 1113 // rax - &from[element count - 1] 1114 // 1115 void array_overlap_test(address no_overlap_target, Address::ScaleFactor sf) { 1116 assert(no_overlap_target != NULL, "must be generated"); 1117 array_overlap_test(no_overlap_target, NULL, sf); 1118 } 1119 void array_overlap_test(Label& L_no_overlap, Address::ScaleFactor sf) { 1120 array_overlap_test(NULL, &L_no_overlap, sf); 1121 } 1122 void array_overlap_test(address no_overlap_target, Label* NOLp, Address::ScaleFactor sf) { 1123 const Register from = c_rarg0; 1124 const Register to = c_rarg1; 1125 const Register count = c_rarg2; 1126 const Register end_from = rax; 1127 1128 __ cmpptr(to, from); 1129 __ lea(end_from, Address(from, count, sf, 0)); 1130 if (NOLp == NULL) { 1131 ExternalAddress no_overlap(no_overlap_target); 1132 __ jump_cc(Assembler::belowEqual, no_overlap); 1133 __ cmpptr(to, end_from); 1134 __ jump_cc(Assembler::aboveEqual, no_overlap); 1135 } else { 1136 __ jcc(Assembler::belowEqual, (*NOLp)); 1137 __ cmpptr(to, end_from); 1138 __ jcc(Assembler::aboveEqual, (*NOLp)); 1139 } 1140 } 1141 1142 // Shuffle first three arg regs on Windows into Linux/Solaris locations. 1143 // 1144 // Outputs: 1145 // rdi - rcx 1146 // rsi - rdx 1147 // rdx - r8 1148 // rcx - r9 1149 // 1150 // Registers r9 and r10 are used to save rdi and rsi on Windows, which latter 1151 // are non-volatile. r9 and r10 should not be used by the caller. 1152 // 1153 void setup_arg_regs(int nargs = 3) { 1154 const Register saved_rdi = r9; 1155 const Register saved_rsi = r10; 1156 assert(nargs == 3 || nargs == 4, "else fix"); 1157#ifdef _WIN64 1158 assert(c_rarg0 == rcx && c_rarg1 == rdx && c_rarg2 == r8 && c_rarg3 == r9, 1159 "unexpected argument registers"); 1160 if (nargs >= 4) 1161 __ mov(rax, r9); // r9 is also saved_rdi 1162 __ movptr(saved_rdi, rdi); 1163 __ movptr(saved_rsi, rsi); 1164 __ mov(rdi, rcx); // c_rarg0 1165 __ mov(rsi, rdx); // c_rarg1 1166 __ mov(rdx, r8); // c_rarg2 1167 if (nargs >= 4) 1168 __ mov(rcx, rax); // c_rarg3 (via rax) 1169#else 1170 assert(c_rarg0 == rdi && c_rarg1 == rsi && c_rarg2 == rdx && c_rarg3 == rcx, 1171 "unexpected argument registers"); 1172#endif 1173 } 1174 1175 void restore_arg_regs() { 1176 const Register saved_rdi = r9; 1177 const Register saved_rsi = r10; 1178#ifdef _WIN64 1179 __ movptr(rdi, saved_rdi); 1180 __ movptr(rsi, saved_rsi); 1181#endif 1182 } 1183 1184 // Generate code for an array write pre barrier 1185 // 1186 // addr - starting address 1187 // count - element count 1188 // tmp - scratch register 1189 // 1190 // Destroy no registers! 1191 // 1192 void gen_write_ref_array_pre_barrier(Register addr, Register count, bool dest_uninitialized) { 1193 BarrierSet* bs = Universe::heap()->barrier_set(); 1194 switch (bs->kind()) { 1195 case BarrierSet::G1SATBCT: 1196 case BarrierSet::G1SATBCTLogging: 1197 // With G1, don't generate the call if we statically know that the target in uninitialized 1198 if (!dest_uninitialized) { 1199 __ pusha(); // push registers 1200 if (count == c_rarg0) { 1201 if (addr == c_rarg1) { 1202 // exactly backwards!! 1203 __ xchgptr(c_rarg1, c_rarg0); 1204 } else { 1205 __ movptr(c_rarg1, count); 1206 __ movptr(c_rarg0, addr); 1207 } 1208 } else { 1209 __ movptr(c_rarg0, addr); 1210 __ movptr(c_rarg1, count); 1211 } 1212 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_pre), 2); 1213 __ popa(); 1214 } 1215 break; 1216 case BarrierSet::CardTableModRef: 1217 case BarrierSet::CardTableExtension: 1218 case BarrierSet::ModRef: 1219 break; 1220 default: 1221 ShouldNotReachHere(); 1222 1223 } 1224 } 1225 1226 // 1227 // Generate code for an array write post barrier 1228 // 1229 // Input: 1230 // start - register containing starting address of destination array 1231 // end - register containing ending address of destination array 1232 // scratch - scratch register 1233 // 1234 // The input registers are overwritten. 1235 // The ending address is inclusive. 1236 void gen_write_ref_array_post_barrier(Register start, Register end, Register scratch) { 1237 assert_different_registers(start, end, scratch); 1238 BarrierSet* bs = Universe::heap()->barrier_set(); 1239 switch (bs->kind()) { 1240 case BarrierSet::G1SATBCT: 1241 case BarrierSet::G1SATBCTLogging: 1242 1243 { 1244 __ pusha(); // push registers (overkill) 1245 // must compute element count unless barrier set interface is changed (other platforms supply count) 1246 assert_different_registers(start, end, scratch); 1247 __ lea(scratch, Address(end, BytesPerHeapOop)); 1248 __ subptr(scratch, start); // subtract start to get #bytes 1249 __ shrptr(scratch, LogBytesPerHeapOop); // convert to element count 1250 __ mov(c_rarg0, start); 1251 __ mov(c_rarg1, scratch); 1252 __ call_VM_leaf(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post), 2); 1253 __ popa(); 1254 } 1255 break; 1256 case BarrierSet::CardTableModRef: 1257 case BarrierSet::CardTableExtension: 1258 { 1259 CardTableModRefBS* ct = (CardTableModRefBS*)bs; 1260 assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); 1261 1262 Label L_loop; 1263 1264 __ shrptr(start, CardTableModRefBS::card_shift); 1265 __ addptr(end, BytesPerHeapOop); 1266 __ shrptr(end, CardTableModRefBS::card_shift); 1267 __ subptr(end, start); // number of bytes to copy 1268 1269 intptr_t disp = (intptr_t) ct->byte_map_base; 1270 if (Assembler::is_simm32(disp)) { 1271 Address cardtable(noreg, noreg, Address::no_scale, disp); 1272 __ lea(scratch, cardtable); 1273 } else { 1274 ExternalAddress cardtable((address)disp); 1275 __ lea(scratch, cardtable); 1276 } 1277 1278 const Register count = end; // 'end' register contains bytes count now 1279 __ addptr(start, scratch); 1280 __ BIND(L_loop); 1281 __ movb(Address(start, count, Address::times_1), 0); 1282 __ decrement(count); 1283 __ jcc(Assembler::greaterEqual, L_loop); 1284 } 1285 break; 1286 default: 1287 ShouldNotReachHere(); 1288 1289 } 1290 } 1291 1292 1293 // Copy big chunks forward 1294 // 1295 // Inputs: 1296 // end_from - source arrays end address 1297 // end_to - destination array end address 1298 // qword_count - 64-bits element count, negative 1299 // to - scratch 1300 // L_copy_32_bytes - entry label 1301 // L_copy_8_bytes - exit label 1302 // 1303 void copy_32_bytes_forward(Register end_from, Register end_to, 1304 Register qword_count, Register to, 1305 Label& L_copy_32_bytes, Label& L_copy_8_bytes) { 1306 DEBUG_ONLY(__ stop("enter at entry label, not here")); 1307 Label L_loop; 1308 __ align(OptoLoopAlignment); 1309 __ BIND(L_loop); 1310 if(UseUnalignedLoadStores) { 1311 __ movdqu(xmm0, Address(end_from, qword_count, Address::times_8, -24)); 1312 __ movdqu(Address(end_to, qword_count, Address::times_8, -24), xmm0); 1313 __ movdqu(xmm1, Address(end_from, qword_count, Address::times_8, - 8)); 1314 __ movdqu(Address(end_to, qword_count, Address::times_8, - 8), xmm1); 1315 1316 } else { 1317 __ movq(to, Address(end_from, qword_count, Address::times_8, -24)); 1318 __ movq(Address(end_to, qword_count, Address::times_8, -24), to); 1319 __ movq(to, Address(end_from, qword_count, Address::times_8, -16)); 1320 __ movq(Address(end_to, qword_count, Address::times_8, -16), to); 1321 __ movq(to, Address(end_from, qword_count, Address::times_8, - 8)); 1322 __ movq(Address(end_to, qword_count, Address::times_8, - 8), to); 1323 __ movq(to, Address(end_from, qword_count, Address::times_8, - 0)); 1324 __ movq(Address(end_to, qword_count, Address::times_8, - 0), to); 1325 } 1326 __ BIND(L_copy_32_bytes); 1327 __ addptr(qword_count, 4); 1328 __ jcc(Assembler::lessEqual, L_loop); 1329 __ subptr(qword_count, 4); 1330 __ jcc(Assembler::less, L_copy_8_bytes); // Copy trailing qwords 1331 } 1332 1333 1334 // Copy big chunks backward 1335 // 1336 // Inputs: 1337 // from - source arrays address 1338 // dest - destination array address 1339 // qword_count - 64-bits element count 1340 // to - scratch 1341 // L_copy_32_bytes - entry label 1342 // L_copy_8_bytes - exit label 1343 // 1344 void copy_32_bytes_backward(Register from, Register dest, 1345 Register qword_count, Register to, 1346 Label& L_copy_32_bytes, Label& L_copy_8_bytes) { 1347 DEBUG_ONLY(__ stop("enter at entry label, not here")); 1348 Label L_loop; 1349 __ align(OptoLoopAlignment); 1350 __ BIND(L_loop); 1351 if(UseUnalignedLoadStores) { 1352 __ movdqu(xmm0, Address(from, qword_count, Address::times_8, 16)); 1353 __ movdqu(Address(dest, qword_count, Address::times_8, 16), xmm0); 1354 __ movdqu(xmm1, Address(from, qword_count, Address::times_8, 0)); 1355 __ movdqu(Address(dest, qword_count, Address::times_8, 0), xmm1); 1356 1357 } else { 1358 __ movq(to, Address(from, qword_count, Address::times_8, 24)); 1359 __ movq(Address(dest, qword_count, Address::times_8, 24), to); 1360 __ movq(to, Address(from, qword_count, Address::times_8, 16)); 1361 __ movq(Address(dest, qword_count, Address::times_8, 16), to); 1362 __ movq(to, Address(from, qword_count, Address::times_8, 8)); 1363 __ movq(Address(dest, qword_count, Address::times_8, 8), to); 1364 __ movq(to, Address(from, qword_count, Address::times_8, 0)); 1365 __ movq(Address(dest, qword_count, Address::times_8, 0), to); 1366 } 1367 __ BIND(L_copy_32_bytes); 1368 __ subptr(qword_count, 4); 1369 __ jcc(Assembler::greaterEqual, L_loop); 1370 __ addptr(qword_count, 4); 1371 __ jcc(Assembler::greater, L_copy_8_bytes); // Copy trailing qwords 1372 } 1373 1374 1375 // Arguments: 1376 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1377 // ignored 1378 // name - stub name string 1379 // 1380 // Inputs: 1381 // c_rarg0 - source array address 1382 // c_rarg1 - destination array address 1383 // c_rarg2 - element count, treated as ssize_t, can be zero 1384 // 1385 // If 'from' and/or 'to' are aligned on 4-, 2-, or 1-byte boundaries, 1386 // we let the hardware handle it. The one to eight bytes within words, 1387 // dwords or qwords that span cache line boundaries will still be loaded 1388 // and stored atomically. 1389 // 1390 // Side Effects: 1391 // disjoint_byte_copy_entry is set to the no-overlap entry point 1392 // used by generate_conjoint_byte_copy(). 1393 // 1394 address generate_disjoint_byte_copy(bool aligned, address* entry, const char *name) { 1395 __ align(CodeEntryAlignment); 1396 StubCodeMark mark(this, "StubRoutines", name); 1397 address start = __ pc(); 1398 1399 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_copy_2_bytes; 1400 Label L_copy_byte, L_exit; 1401 const Register from = rdi; // source array address 1402 const Register to = rsi; // destination array address 1403 const Register count = rdx; // elements count 1404 const Register byte_count = rcx; 1405 const Register qword_count = count; 1406 const Register end_from = from; // source array end address 1407 const Register end_to = to; // destination array end address 1408 // End pointers are inclusive, and if count is not zero they point 1409 // to the last unit copied: end_to[0] := end_from[0] 1410 1411 __ enter(); // required for proper stackwalking of RuntimeStub frame 1412 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1413 1414 if (entry != NULL) { 1415 *entry = __ pc(); 1416 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1417 BLOCK_COMMENT("Entry:"); 1418 } 1419 1420 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1421 // r9 and r10 may be used to save non-volatile registers 1422 1423 // 'from', 'to' and 'count' are now valid 1424 __ movptr(byte_count, count); 1425 __ shrptr(count, 3); // count => qword_count 1426 1427 // Copy from low to high addresses. Use 'to' as scratch. 1428 __ lea(end_from, Address(from, qword_count, Address::times_8, -8)); 1429 __ lea(end_to, Address(to, qword_count, Address::times_8, -8)); 1430 __ negptr(qword_count); // make the count negative 1431 __ jmp(L_copy_32_bytes); 1432 1433 // Copy trailing qwords 1434 __ BIND(L_copy_8_bytes); 1435 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); 1436 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); 1437 __ increment(qword_count); 1438 __ jcc(Assembler::notZero, L_copy_8_bytes); 1439 1440 // Check for and copy trailing dword 1441 __ BIND(L_copy_4_bytes); 1442 __ testl(byte_count, 4); 1443 __ jccb(Assembler::zero, L_copy_2_bytes); 1444 __ movl(rax, Address(end_from, 8)); 1445 __ movl(Address(end_to, 8), rax); 1446 1447 __ addptr(end_from, 4); 1448 __ addptr(end_to, 4); 1449 1450 // Check for and copy trailing word 1451 __ BIND(L_copy_2_bytes); 1452 __ testl(byte_count, 2); 1453 __ jccb(Assembler::zero, L_copy_byte); 1454 __ movw(rax, Address(end_from, 8)); 1455 __ movw(Address(end_to, 8), rax); 1456 1457 __ addptr(end_from, 2); 1458 __ addptr(end_to, 2); 1459 1460 // Check for and copy trailing byte 1461 __ BIND(L_copy_byte); 1462 __ testl(byte_count, 1); 1463 __ jccb(Assembler::zero, L_exit); 1464 __ movb(rax, Address(end_from, 8)); 1465 __ movb(Address(end_to, 8), rax); 1466 1467 __ BIND(L_exit); 1468 restore_arg_regs(); 1469 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); // Update counter after rscratch1 is free 1470 __ xorptr(rax, rax); // return 0 1471 __ leave(); // required for proper stackwalking of RuntimeStub frame 1472 __ ret(0); 1473 1474 // Copy in 32-bytes chunks 1475 copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1476 __ jmp(L_copy_4_bytes); 1477 1478 return start; 1479 } 1480 1481 // Arguments: 1482 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1483 // ignored 1484 // name - stub name string 1485 // 1486 // Inputs: 1487 // c_rarg0 - source array address 1488 // c_rarg1 - destination array address 1489 // c_rarg2 - element count, treated as ssize_t, can be zero 1490 // 1491 // If 'from' and/or 'to' are aligned on 4-, 2-, or 1-byte boundaries, 1492 // we let the hardware handle it. The one to eight bytes within words, 1493 // dwords or qwords that span cache line boundaries will still be loaded 1494 // and stored atomically. 1495 // 1496 address generate_conjoint_byte_copy(bool aligned, address nooverlap_target, 1497 address* entry, const char *name) { 1498 __ align(CodeEntryAlignment); 1499 StubCodeMark mark(this, "StubRoutines", name); 1500 address start = __ pc(); 1501 1502 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_copy_2_bytes; 1503 const Register from = rdi; // source array address 1504 const Register to = rsi; // destination array address 1505 const Register count = rdx; // elements count 1506 const Register byte_count = rcx; 1507 const Register qword_count = count; 1508 1509 __ enter(); // required for proper stackwalking of RuntimeStub frame 1510 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1511 1512 if (entry != NULL) { 1513 *entry = __ pc(); 1514 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1515 BLOCK_COMMENT("Entry:"); 1516 } 1517 1518 array_overlap_test(nooverlap_target, Address::times_1); 1519 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1520 // r9 and r10 may be used to save non-volatile registers 1521 1522 // 'from', 'to' and 'count' are now valid 1523 __ movptr(byte_count, count); 1524 __ shrptr(count, 3); // count => qword_count 1525 1526 // Copy from high to low addresses. 1527 1528 // Check for and copy trailing byte 1529 __ testl(byte_count, 1); 1530 __ jcc(Assembler::zero, L_copy_2_bytes); 1531 __ movb(rax, Address(from, byte_count, Address::times_1, -1)); 1532 __ movb(Address(to, byte_count, Address::times_1, -1), rax); 1533 __ decrement(byte_count); // Adjust for possible trailing word 1534 1535 // Check for and copy trailing word 1536 __ BIND(L_copy_2_bytes); 1537 __ testl(byte_count, 2); 1538 __ jcc(Assembler::zero, L_copy_4_bytes); 1539 __ movw(rax, Address(from, byte_count, Address::times_1, -2)); 1540 __ movw(Address(to, byte_count, Address::times_1, -2), rax); 1541 1542 // Check for and copy trailing dword 1543 __ BIND(L_copy_4_bytes); 1544 __ testl(byte_count, 4); 1545 __ jcc(Assembler::zero, L_copy_32_bytes); 1546 __ movl(rax, Address(from, qword_count, Address::times_8)); 1547 __ movl(Address(to, qword_count, Address::times_8), rax); 1548 __ jmp(L_copy_32_bytes); 1549 1550 // Copy trailing qwords 1551 __ BIND(L_copy_8_bytes); 1552 __ movq(rax, Address(from, qword_count, Address::times_8, -8)); 1553 __ movq(Address(to, qword_count, Address::times_8, -8), rax); 1554 __ decrement(qword_count); 1555 __ jcc(Assembler::notZero, L_copy_8_bytes); 1556 1557 restore_arg_regs(); 1558 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); // Update counter after rscratch1 is free 1559 __ xorptr(rax, rax); // return 0 1560 __ leave(); // required for proper stackwalking of RuntimeStub frame 1561 __ ret(0); 1562 1563 // Copy in 32-bytes chunks 1564 copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1565 1566 restore_arg_regs(); 1567 inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr); // Update counter after rscratch1 is free 1568 __ xorptr(rax, rax); // return 0 1569 __ leave(); // required for proper stackwalking of RuntimeStub frame 1570 __ ret(0); 1571 1572 return start; 1573 } 1574 1575 // Arguments: 1576 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1577 // ignored 1578 // name - stub name string 1579 // 1580 // Inputs: 1581 // c_rarg0 - source array address 1582 // c_rarg1 - destination array address 1583 // c_rarg2 - element count, treated as ssize_t, can be zero 1584 // 1585 // If 'from' and/or 'to' are aligned on 4- or 2-byte boundaries, we 1586 // let the hardware handle it. The two or four words within dwords 1587 // or qwords that span cache line boundaries will still be loaded 1588 // and stored atomically. 1589 // 1590 // Side Effects: 1591 // disjoint_short_copy_entry is set to the no-overlap entry point 1592 // used by generate_conjoint_short_copy(). 1593 // 1594 address generate_disjoint_short_copy(bool aligned, address *entry, const char *name) { 1595 __ align(CodeEntryAlignment); 1596 StubCodeMark mark(this, "StubRoutines", name); 1597 address start = __ pc(); 1598 1599 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes,L_copy_2_bytes,L_exit; 1600 const Register from = rdi; // source array address 1601 const Register to = rsi; // destination array address 1602 const Register count = rdx; // elements count 1603 const Register word_count = rcx; 1604 const Register qword_count = count; 1605 const Register end_from = from; // source array end address 1606 const Register end_to = to; // destination array end address 1607 // End pointers are inclusive, and if count is not zero they point 1608 // to the last unit copied: end_to[0] := end_from[0] 1609 1610 __ enter(); // required for proper stackwalking of RuntimeStub frame 1611 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1612 1613 if (entry != NULL) { 1614 *entry = __ pc(); 1615 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1616 BLOCK_COMMENT("Entry:"); 1617 } 1618 1619 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1620 // r9 and r10 may be used to save non-volatile registers 1621 1622 // 'from', 'to' and 'count' are now valid 1623 __ movptr(word_count, count); 1624 __ shrptr(count, 2); // count => qword_count 1625 1626 // Copy from low to high addresses. Use 'to' as scratch. 1627 __ lea(end_from, Address(from, qword_count, Address::times_8, -8)); 1628 __ lea(end_to, Address(to, qword_count, Address::times_8, -8)); 1629 __ negptr(qword_count); 1630 __ jmp(L_copy_32_bytes); 1631 1632 // Copy trailing qwords 1633 __ BIND(L_copy_8_bytes); 1634 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); 1635 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); 1636 __ increment(qword_count); 1637 __ jcc(Assembler::notZero, L_copy_8_bytes); 1638 1639 // Original 'dest' is trashed, so we can't use it as a 1640 // base register for a possible trailing word copy 1641 1642 // Check for and copy trailing dword 1643 __ BIND(L_copy_4_bytes); 1644 __ testl(word_count, 2); 1645 __ jccb(Assembler::zero, L_copy_2_bytes); 1646 __ movl(rax, Address(end_from, 8)); 1647 __ movl(Address(end_to, 8), rax); 1648 1649 __ addptr(end_from, 4); 1650 __ addptr(end_to, 4); 1651 1652 // Check for and copy trailing word 1653 __ BIND(L_copy_2_bytes); 1654 __ testl(word_count, 1); 1655 __ jccb(Assembler::zero, L_exit); 1656 __ movw(rax, Address(end_from, 8)); 1657 __ movw(Address(end_to, 8), rax); 1658 1659 __ BIND(L_exit); 1660 restore_arg_regs(); 1661 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); // Update counter after rscratch1 is free 1662 __ xorptr(rax, rax); // return 0 1663 __ leave(); // required for proper stackwalking of RuntimeStub frame 1664 __ ret(0); 1665 1666 // Copy in 32-bytes chunks 1667 copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1668 __ jmp(L_copy_4_bytes); 1669 1670 return start; 1671 } 1672 1673 address generate_fill(BasicType t, bool aligned, const char *name) { 1674 __ align(CodeEntryAlignment); 1675 StubCodeMark mark(this, "StubRoutines", name); 1676 address start = __ pc(); 1677 1678 BLOCK_COMMENT("Entry:"); 1679 1680 const Register to = c_rarg0; // source array address 1681 const Register value = c_rarg1; // value 1682 const Register count = c_rarg2; // elements count 1683 1684 __ enter(); // required for proper stackwalking of RuntimeStub frame 1685 1686 __ generate_fill(t, aligned, to, value, count, rax, xmm0); 1687 1688 __ leave(); // required for proper stackwalking of RuntimeStub frame 1689 __ ret(0); 1690 return start; 1691 } 1692 1693 // Arguments: 1694 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1695 // ignored 1696 // name - stub name string 1697 // 1698 // Inputs: 1699 // c_rarg0 - source array address 1700 // c_rarg1 - destination array address 1701 // c_rarg2 - element count, treated as ssize_t, can be zero 1702 // 1703 // If 'from' and/or 'to' are aligned on 4- or 2-byte boundaries, we 1704 // let the hardware handle it. The two or four words within dwords 1705 // or qwords that span cache line boundaries will still be loaded 1706 // and stored atomically. 1707 // 1708 address generate_conjoint_short_copy(bool aligned, address nooverlap_target, 1709 address *entry, const char *name) { 1710 __ align(CodeEntryAlignment); 1711 StubCodeMark mark(this, "StubRoutines", name); 1712 address start = __ pc(); 1713 1714 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes; 1715 const Register from = rdi; // source array address 1716 const Register to = rsi; // destination array address 1717 const Register count = rdx; // elements count 1718 const Register word_count = rcx; 1719 const Register qword_count = count; 1720 1721 __ enter(); // required for proper stackwalking of RuntimeStub frame 1722 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1723 1724 if (entry != NULL) { 1725 *entry = __ pc(); 1726 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1727 BLOCK_COMMENT("Entry:"); 1728 } 1729 1730 array_overlap_test(nooverlap_target, Address::times_2); 1731 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1732 // r9 and r10 may be used to save non-volatile registers 1733 1734 // 'from', 'to' and 'count' are now valid 1735 __ movptr(word_count, count); 1736 __ shrptr(count, 2); // count => qword_count 1737 1738 // Copy from high to low addresses. Use 'to' as scratch. 1739 1740 // Check for and copy trailing word 1741 __ testl(word_count, 1); 1742 __ jccb(Assembler::zero, L_copy_4_bytes); 1743 __ movw(rax, Address(from, word_count, Address::times_2, -2)); 1744 __ movw(Address(to, word_count, Address::times_2, -2), rax); 1745 1746 // Check for and copy trailing dword 1747 __ BIND(L_copy_4_bytes); 1748 __ testl(word_count, 2); 1749 __ jcc(Assembler::zero, L_copy_32_bytes); 1750 __ movl(rax, Address(from, qword_count, Address::times_8)); 1751 __ movl(Address(to, qword_count, Address::times_8), rax); 1752 __ jmp(L_copy_32_bytes); 1753 1754 // Copy trailing qwords 1755 __ BIND(L_copy_8_bytes); 1756 __ movq(rax, Address(from, qword_count, Address::times_8, -8)); 1757 __ movq(Address(to, qword_count, Address::times_8, -8), rax); 1758 __ decrement(qword_count); 1759 __ jcc(Assembler::notZero, L_copy_8_bytes); 1760 1761 restore_arg_regs(); 1762 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); // Update counter after rscratch1 is free 1763 __ xorptr(rax, rax); // return 0 1764 __ leave(); // required for proper stackwalking of RuntimeStub frame 1765 __ ret(0); 1766 1767 // Copy in 32-bytes chunks 1768 copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1769 1770 restore_arg_regs(); 1771 inc_counter_np(SharedRuntime::_jshort_array_copy_ctr); // Update counter after rscratch1 is free 1772 __ xorptr(rax, rax); // return 0 1773 __ leave(); // required for proper stackwalking of RuntimeStub frame 1774 __ ret(0); 1775 1776 return start; 1777 } 1778 1779 // Arguments: 1780 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1781 // ignored 1782 // is_oop - true => oop array, so generate store check code 1783 // name - stub name string 1784 // 1785 // Inputs: 1786 // c_rarg0 - source array address 1787 // c_rarg1 - destination array address 1788 // c_rarg2 - element count, treated as ssize_t, can be zero 1789 // 1790 // If 'from' and/or 'to' are aligned on 4-byte boundaries, we let 1791 // the hardware handle it. The two dwords within qwords that span 1792 // cache line boundaries will still be loaded and stored atomicly. 1793 // 1794 // Side Effects: 1795 // disjoint_int_copy_entry is set to the no-overlap entry point 1796 // used by generate_conjoint_int_oop_copy(). 1797 // 1798 address generate_disjoint_int_oop_copy(bool aligned, bool is_oop, address* entry, 1799 const char *name, bool dest_uninitialized = false) { 1800 __ align(CodeEntryAlignment); 1801 StubCodeMark mark(this, "StubRoutines", name); 1802 address start = __ pc(); 1803 1804 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_4_bytes, L_exit; 1805 const Register from = rdi; // source array address 1806 const Register to = rsi; // destination array address 1807 const Register count = rdx; // elements count 1808 const Register dword_count = rcx; 1809 const Register qword_count = count; 1810 const Register end_from = from; // source array end address 1811 const Register end_to = to; // destination array end address 1812 const Register saved_to = r11; // saved destination array address 1813 // End pointers are inclusive, and if count is not zero they point 1814 // to the last unit copied: end_to[0] := end_from[0] 1815 1816 __ enter(); // required for proper stackwalking of RuntimeStub frame 1817 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1818 1819 if (entry != NULL) { 1820 *entry = __ pc(); 1821 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1822 BLOCK_COMMENT("Entry:"); 1823 } 1824 1825 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1826 // r9 and r10 may be used to save non-volatile registers 1827 if (is_oop) { 1828 __ movq(saved_to, to); 1829 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized); 1830 } 1831 1832 // 'from', 'to' and 'count' are now valid 1833 __ movptr(dword_count, count); 1834 __ shrptr(count, 1); // count => qword_count 1835 1836 // Copy from low to high addresses. Use 'to' as scratch. 1837 __ lea(end_from, Address(from, qword_count, Address::times_8, -8)); 1838 __ lea(end_to, Address(to, qword_count, Address::times_8, -8)); 1839 __ negptr(qword_count); 1840 __ jmp(L_copy_32_bytes); 1841 1842 // Copy trailing qwords 1843 __ BIND(L_copy_8_bytes); 1844 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); 1845 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); 1846 __ increment(qword_count); 1847 __ jcc(Assembler::notZero, L_copy_8_bytes); 1848 1849 // Check for and copy trailing dword 1850 __ BIND(L_copy_4_bytes); 1851 __ testl(dword_count, 1); // Only byte test since the value is 0 or 1 1852 __ jccb(Assembler::zero, L_exit); 1853 __ movl(rax, Address(end_from, 8)); 1854 __ movl(Address(end_to, 8), rax); 1855 1856 __ BIND(L_exit); 1857 if (is_oop) { 1858 __ leaq(end_to, Address(saved_to, dword_count, Address::times_4, -4)); 1859 gen_write_ref_array_post_barrier(saved_to, end_to, rax); 1860 } 1861 restore_arg_regs(); 1862 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); // Update counter after rscratch1 is free 1863 __ xorptr(rax, rax); // return 0 1864 __ leave(); // required for proper stackwalking of RuntimeStub frame 1865 __ ret(0); 1866 1867 // Copy 32-bytes chunks 1868 copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1869 __ jmp(L_copy_4_bytes); 1870 1871 return start; 1872 } 1873 1874 // Arguments: 1875 // aligned - true => Input and output aligned on a HeapWord == 8-byte boundary 1876 // ignored 1877 // is_oop - true => oop array, so generate store check code 1878 // name - stub name string 1879 // 1880 // Inputs: 1881 // c_rarg0 - source array address 1882 // c_rarg1 - destination array address 1883 // c_rarg2 - element count, treated as ssize_t, can be zero 1884 // 1885 // If 'from' and/or 'to' are aligned on 4-byte boundaries, we let 1886 // the hardware handle it. The two dwords within qwords that span 1887 // cache line boundaries will still be loaded and stored atomicly. 1888 // 1889 address generate_conjoint_int_oop_copy(bool aligned, bool is_oop, address nooverlap_target, 1890 address *entry, const char *name, 1891 bool dest_uninitialized = false) { 1892 __ align(CodeEntryAlignment); 1893 StubCodeMark mark(this, "StubRoutines", name); 1894 address start = __ pc(); 1895 1896 Label L_copy_32_bytes, L_copy_8_bytes, L_copy_2_bytes, L_exit; 1897 const Register from = rdi; // source array address 1898 const Register to = rsi; // destination array address 1899 const Register count = rdx; // elements count 1900 const Register dword_count = rcx; 1901 const Register qword_count = count; 1902 1903 __ enter(); // required for proper stackwalking of RuntimeStub frame 1904 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 1905 1906 if (entry != NULL) { 1907 *entry = __ pc(); 1908 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 1909 BLOCK_COMMENT("Entry:"); 1910 } 1911 1912 array_overlap_test(nooverlap_target, Address::times_4); 1913 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 1914 // r9 and r10 may be used to save non-volatile registers 1915 1916 if (is_oop) { 1917 // no registers are destroyed by this call 1918 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized); 1919 } 1920 1921 assert_clean_int(count, rax); // Make sure 'count' is clean int. 1922 // 'from', 'to' and 'count' are now valid 1923 __ movptr(dword_count, count); 1924 __ shrptr(count, 1); // count => qword_count 1925 1926 // Copy from high to low addresses. Use 'to' as scratch. 1927 1928 // Check for and copy trailing dword 1929 __ testl(dword_count, 1); 1930 __ jcc(Assembler::zero, L_copy_32_bytes); 1931 __ movl(rax, Address(from, dword_count, Address::times_4, -4)); 1932 __ movl(Address(to, dword_count, Address::times_4, -4), rax); 1933 __ jmp(L_copy_32_bytes); 1934 1935 // Copy trailing qwords 1936 __ BIND(L_copy_8_bytes); 1937 __ movq(rax, Address(from, qword_count, Address::times_8, -8)); 1938 __ movq(Address(to, qword_count, Address::times_8, -8), rax); 1939 __ decrement(qword_count); 1940 __ jcc(Assembler::notZero, L_copy_8_bytes); 1941 1942 if (is_oop) { 1943 __ jmp(L_exit); 1944 } 1945 restore_arg_regs(); 1946 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); // Update counter after rscratch1 is free 1947 __ xorptr(rax, rax); // return 0 1948 __ leave(); // required for proper stackwalking of RuntimeStub frame 1949 __ ret(0); 1950 1951 // Copy in 32-bytes chunks 1952 copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 1953 1954 __ bind(L_exit); 1955 if (is_oop) { 1956 Register end_to = rdx; 1957 __ leaq(end_to, Address(to, dword_count, Address::times_4, -4)); 1958 gen_write_ref_array_post_barrier(to, end_to, rax); 1959 } 1960 restore_arg_regs(); 1961 inc_counter_np(SharedRuntime::_jint_array_copy_ctr); // Update counter after rscratch1 is free 1962 __ xorptr(rax, rax); // return 0 1963 __ leave(); // required for proper stackwalking of RuntimeStub frame 1964 __ ret(0); 1965 1966 return start; 1967 } 1968 1969 // Arguments: 1970 // aligned - true => Input and output aligned on a HeapWord boundary == 8 bytes 1971 // ignored 1972 // is_oop - true => oop array, so generate store check code 1973 // name - stub name string 1974 // 1975 // Inputs: 1976 // c_rarg0 - source array address 1977 // c_rarg1 - destination array address 1978 // c_rarg2 - element count, treated as ssize_t, can be zero 1979 // 1980 // Side Effects: 1981 // disjoint_oop_copy_entry or disjoint_long_copy_entry is set to the 1982 // no-overlap entry point used by generate_conjoint_long_oop_copy(). 1983 // 1984 address generate_disjoint_long_oop_copy(bool aligned, bool is_oop, address *entry, 1985 const char *name, bool dest_uninitialized = false) { 1986 __ align(CodeEntryAlignment); 1987 StubCodeMark mark(this, "StubRoutines", name); 1988 address start = __ pc(); 1989 1990 Label L_copy_32_bytes, L_copy_8_bytes, L_exit; 1991 const Register from = rdi; // source array address 1992 const Register to = rsi; // destination array address 1993 const Register qword_count = rdx; // elements count 1994 const Register end_from = from; // source array end address 1995 const Register end_to = rcx; // destination array end address 1996 const Register saved_to = to; 1997 // End pointers are inclusive, and if count is not zero they point 1998 // to the last unit copied: end_to[0] := end_from[0] 1999 2000 __ enter(); // required for proper stackwalking of RuntimeStub frame 2001 // Save no-overlap entry point for generate_conjoint_long_oop_copy() 2002 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 2003 2004 if (entry != NULL) { 2005 *entry = __ pc(); 2006 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 2007 BLOCK_COMMENT("Entry:"); 2008 } 2009 2010 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 2011 // r9 and r10 may be used to save non-volatile registers 2012 // 'from', 'to' and 'qword_count' are now valid 2013 if (is_oop) { 2014 // no registers are destroyed by this call 2015 gen_write_ref_array_pre_barrier(to, qword_count, dest_uninitialized); 2016 } 2017 2018 // Copy from low to high addresses. Use 'to' as scratch. 2019 __ lea(end_from, Address(from, qword_count, Address::times_8, -8)); 2020 __ lea(end_to, Address(to, qword_count, Address::times_8, -8)); 2021 __ negptr(qword_count); 2022 __ jmp(L_copy_32_bytes); 2023 2024 // Copy trailing qwords 2025 __ BIND(L_copy_8_bytes); 2026 __ movq(rax, Address(end_from, qword_count, Address::times_8, 8)); 2027 __ movq(Address(end_to, qword_count, Address::times_8, 8), rax); 2028 __ increment(qword_count); 2029 __ jcc(Assembler::notZero, L_copy_8_bytes); 2030 2031 if (is_oop) { 2032 __ jmp(L_exit); 2033 } else { 2034 restore_arg_regs(); 2035 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); // Update counter after rscratch1 is free 2036 __ xorptr(rax, rax); // return 0 2037 __ leave(); // required for proper stackwalking of RuntimeStub frame 2038 __ ret(0); 2039 } 2040 2041 // Copy 64-byte chunks 2042 copy_32_bytes_forward(end_from, end_to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 2043 2044 if (is_oop) { 2045 __ BIND(L_exit); 2046 gen_write_ref_array_post_barrier(saved_to, end_to, rax); 2047 } 2048 restore_arg_regs(); 2049 if (is_oop) { 2050 inc_counter_np(SharedRuntime::_oop_array_copy_ctr); // Update counter after rscratch1 is free 2051 } else { 2052 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); // Update counter after rscratch1 is free 2053 } 2054 __ xorptr(rax, rax); // return 0 2055 __ leave(); // required for proper stackwalking of RuntimeStub frame 2056 __ ret(0); 2057 2058 return start; 2059 } 2060 2061 // Arguments: 2062 // aligned - true => Input and output aligned on a HeapWord boundary == 8 bytes 2063 // ignored 2064 // is_oop - true => oop array, so generate store check code 2065 // name - stub name string 2066 // 2067 // Inputs: 2068 // c_rarg0 - source array address 2069 // c_rarg1 - destination array address 2070 // c_rarg2 - element count, treated as ssize_t, can be zero 2071 // 2072 address generate_conjoint_long_oop_copy(bool aligned, bool is_oop, 2073 address nooverlap_target, address *entry, 2074 const char *name, bool dest_uninitialized = false) { 2075 __ align(CodeEntryAlignment); 2076 StubCodeMark mark(this, "StubRoutines", name); 2077 address start = __ pc(); 2078 2079 Label L_copy_32_bytes, L_copy_8_bytes, L_exit; 2080 const Register from = rdi; // source array address 2081 const Register to = rsi; // destination array address 2082 const Register qword_count = rdx; // elements count 2083 const Register saved_count = rcx; 2084 2085 __ enter(); // required for proper stackwalking of RuntimeStub frame 2086 assert_clean_int(c_rarg2, rax); // Make sure 'count' is clean int. 2087 2088 if (entry != NULL) { 2089 *entry = __ pc(); 2090 // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) 2091 BLOCK_COMMENT("Entry:"); 2092 } 2093 2094 array_overlap_test(nooverlap_target, Address::times_8); 2095 setup_arg_regs(); // from => rdi, to => rsi, count => rdx 2096 // r9 and r10 may be used to save non-volatile registers 2097 // 'from', 'to' and 'qword_count' are now valid 2098 if (is_oop) { 2099 // Save to and count for store barrier 2100 __ movptr(saved_count, qword_count); 2101 // No registers are destroyed by this call 2102 gen_write_ref_array_pre_barrier(to, saved_count, dest_uninitialized); 2103 } 2104 2105 __ jmp(L_copy_32_bytes); 2106 2107 // Copy trailing qwords 2108 __ BIND(L_copy_8_bytes); 2109 __ movq(rax, Address(from, qword_count, Address::times_8, -8)); 2110 __ movq(Address(to, qword_count, Address::times_8, -8), rax); 2111 __ decrement(qword_count); 2112 __ jcc(Assembler::notZero, L_copy_8_bytes); 2113 2114 if (is_oop) { 2115 __ jmp(L_exit); 2116 } else { 2117 restore_arg_regs(); 2118 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); // Update counter after rscratch1 is free 2119 __ xorptr(rax, rax); // return 0 2120 __ leave(); // required for proper stackwalking of RuntimeStub frame 2121 __ ret(0); 2122 } 2123 2124 // Copy in 32-bytes chunks 2125 copy_32_bytes_backward(from, to, qword_count, rax, L_copy_32_bytes, L_copy_8_bytes); 2126 2127 if (is_oop) { 2128 __ BIND(L_exit); 2129 __ lea(rcx, Address(to, saved_count, Address::times_8, -8)); 2130 gen_write_ref_array_post_barrier(to, rcx, rax); 2131 } 2132 restore_arg_regs(); 2133 if (is_oop) { 2134 inc_counter_np(SharedRuntime::_oop_array_copy_ctr); // Update counter after rscratch1 is free 2135 } else { 2136 inc_counter_np(SharedRuntime::_jlong_array_copy_ctr); // Update counter after rscratch1 is free 2137 } 2138 __ xorptr(rax, rax); // return 0 2139 __ leave(); // required for proper stackwalking of RuntimeStub frame 2140 __ ret(0); 2141 2142 return start; 2143 } 2144 2145 2146 // Helper for generating a dynamic type check. 2147 // Smashes no registers. 2148 void generate_type_check(Register sub_klass, 2149 Register super_check_offset, 2150 Register super_klass, 2151 Label& L_success) { 2152 assert_different_registers(sub_klass, super_check_offset, super_klass); 2153 2154 BLOCK_COMMENT("type_check:"); 2155 2156 Label L_miss; 2157 2158 __ check_klass_subtype_fast_path(sub_klass, super_klass, noreg, &L_success, &L_miss, NULL, 2159 super_check_offset); 2160 __ check_klass_subtype_slow_path(sub_klass, super_klass, noreg, noreg, &L_success, NULL); 2161 2162 // Fall through on failure! 2163 __ BIND(L_miss); 2164 } 2165 2166 // 2167 // Generate checkcasting array copy stub 2168 // 2169 // Input: 2170 // c_rarg0 - source array address 2171 // c_rarg1 - destination array address 2172 // c_rarg2 - element count, treated as ssize_t, can be zero 2173 // c_rarg3 - size_t ckoff (super_check_offset) 2174 // not Win64 2175 // c_rarg4 - oop ckval (super_klass) 2176 // Win64 2177 // rsp+40 - oop ckval (super_klass) 2178 // 2179 // Output: 2180 // rax == 0 - success 2181 // rax == -1^K - failure, where K is partial transfer count 2182 // 2183 address generate_checkcast_copy(const char *name, address *entry, 2184 bool dest_uninitialized = false) { 2185 2186 Label L_load_element, L_store_element, L_do_card_marks, L_done; 2187 2188 // Input registers (after setup_arg_regs) 2189 const Register from = rdi; // source array address 2190 const Register to = rsi; // destination array address 2191 const Register length = rdx; // elements count 2192 const Register ckoff = rcx; // super_check_offset 2193 const Register ckval = r8; // super_klass 2194 2195 // Registers used as temps (r13, r14 are save-on-entry) 2196 const Register end_from = from; // source array end address 2197 const Register end_to = r13; // destination array end address 2198 const Register count = rdx; // -(count_remaining) 2199 const Register r14_length = r14; // saved copy of length 2200 // End pointers are inclusive, and if length is not zero they point 2201 // to the last unit copied: end_to[0] := end_from[0] 2202 2203 const Register rax_oop = rax; // actual oop copied 2204 const Register r11_klass = r11; // oop._klass 2205 2206 //--------------------------------------------------------------- 2207 // Assembler stub will be used for this call to arraycopy 2208 // if the two arrays are subtypes of Object[] but the 2209 // destination array type is not equal to or a supertype 2210 // of the source type. Each element must be separately 2211 // checked. 2212 2213 __ align(CodeEntryAlignment); 2214 StubCodeMark mark(this, "StubRoutines", name); 2215 address start = __ pc(); 2216 2217 __ enter(); // required for proper stackwalking of RuntimeStub frame 2218 2219#ifdef ASSERT 2220 // caller guarantees that the arrays really are different 2221 // otherwise, we would have to make conjoint checks 2222 { Label L; 2223 array_overlap_test(L, TIMES_OOP); 2224 __ stop("checkcast_copy within a single array"); 2225 __ bind(L); 2226 } 2227#endif //ASSERT 2228 2229 setup_arg_regs(4); // from => rdi, to => rsi, length => rdx 2230 // ckoff => rcx, ckval => r8 2231 // r9 and r10 may be used to save non-volatile registers 2232#ifdef _WIN64 2233 // last argument (#4) is on stack on Win64 2234 __ movptr(ckval, Address(rsp, 6 * wordSize)); 2235#endif 2236 2237 // Caller of this entry point must set up the argument registers. 2238 if (entry != NULL) { 2239 *entry = __ pc(); 2240 BLOCK_COMMENT("Entry:"); 2241 } 2242 2243 // allocate spill slots for r13, r14 2244 enum { 2245 saved_r13_offset, 2246 saved_r14_offset, 2247 saved_rbp_offset 2248 }; 2249 __ subptr(rsp, saved_rbp_offset * wordSize); 2250 __ movptr(Address(rsp, saved_r13_offset * wordSize), r13); 2251 __ movptr(Address(rsp, saved_r14_offset * wordSize), r14); 2252 2253 // check that int operands are properly extended to size_t 2254 assert_clean_int(length, rax); 2255 assert_clean_int(ckoff, rax); 2256 2257#ifdef ASSERT 2258 BLOCK_COMMENT("assert consistent ckoff/ckval"); 2259 // The ckoff and ckval must be mutually consistent, 2260 // even though caller generates both. 2261 { Label L; 2262 int sco_offset = in_bytes(Klass::super_check_offset_offset()); 2263 __ cmpl(ckoff, Address(ckval, sco_offset)); 2264 __ jcc(Assembler::equal, L); 2265 __ stop("super_check_offset inconsistent"); 2266 __ bind(L); 2267 } 2268#endif //ASSERT 2269 2270 // Loop-invariant addresses. They are exclusive end pointers. 2271 Address end_from_addr(from, length, TIMES_OOP, 0); 2272 Address end_to_addr(to, length, TIMES_OOP, 0); 2273 // Loop-variant addresses. They assume post-incremented count < 0. 2274 Address from_element_addr(end_from, count, TIMES_OOP, 0); 2275 Address to_element_addr(end_to, count, TIMES_OOP, 0); 2276 2277 gen_write_ref_array_pre_barrier(to, count, dest_uninitialized); 2278 2279 // Copy from low to high addresses, indexed from the end of each array. 2280 __ lea(end_from, end_from_addr); 2281 __ lea(end_to, end_to_addr); 2282 __ movptr(r14_length, length); // save a copy of the length 2283 assert(length == count, ""); // else fix next line: 2284 __ negptr(count); // negate and test the length 2285 __ jcc(Assembler::notZero, L_load_element); 2286 2287 // Empty array: Nothing to do. 2288 __ xorptr(rax, rax); // return 0 on (trivial) success 2289 __ jmp(L_done); 2290 2291 // ======== begin loop ======== 2292 // (Loop is rotated; its entry is L_load_element.) 2293 // Loop control: 2294 // for (count = -count; count != 0; count++) 2295 // Base pointers src, dst are biased by 8*(count-1),to last element. 2296 __ align(OptoLoopAlignment); 2297 2298 __ BIND(L_store_element); 2299 __ store_heap_oop(to_element_addr, rax_oop); // store the oop 2300 __ increment(count); // increment the count toward zero 2301 __ jcc(Assembler::zero, L_do_card_marks); 2302 2303 // ======== loop entry is here ======== 2304 __ BIND(L_load_element); 2305 __ load_heap_oop(rax_oop, from_element_addr); // load the oop 2306 __ testptr(rax_oop, rax_oop); 2307 __ jcc(Assembler::zero, L_store_element); 2308 2309 __ load_klass(r11_klass, rax_oop);// query the object klass 2310 generate_type_check(r11_klass, ckoff, ckval, L_store_element); 2311 // ======== end loop ======== 2312 2313 // It was a real error; we must depend on the caller to finish the job. 2314 // Register rdx = -1 * number of *remaining* oops, r14 = *total* oops. 2315 // Emit GC store barriers for the oops we have copied (r14 + rdx), 2316 // and report their number to the caller. 2317 assert_different_registers(rax, r14_length, count, to, end_to, rcx); 2318 __ lea(end_to, to_element_addr); 2319 __ addptr(end_to, -heapOopSize); // make an inclusive end pointer 2320 gen_write_ref_array_post_barrier(to, end_to, rscratch1); 2321 __ movptr(rax, r14_length); // original oops 2322 __ addptr(rax, count); // K = (original - remaining) oops 2323 __ notptr(rax); // report (-1^K) to caller 2324 __ jmp(L_done); 2325 2326 // Come here on success only. 2327 __ BIND(L_do_card_marks); 2328 __ addptr(end_to, -heapOopSize); // make an inclusive end pointer 2329 gen_write_ref_array_post_barrier(to, end_to, rscratch1); 2330 __ xorptr(rax, rax); // return 0 on success 2331 2332 // Common exit point (success or failure). 2333 __ BIND(L_done); 2334 __ movptr(r13, Address(rsp, saved_r13_offset * wordSize)); 2335 __ movptr(r14, Address(rsp, saved_r14_offset * wordSize)); 2336 restore_arg_regs(); 2337 inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr); // Update counter after rscratch1 is free 2338 __ leave(); // required for proper stackwalking of RuntimeStub frame 2339 __ ret(0); 2340 2341 return start; 2342 } 2343 2344 // 2345 // Generate 'unsafe' array copy stub 2346 // Though just as safe as the other stubs, it takes an unscaled 2347 // size_t argument instead of an element count. 2348 // 2349 // Input: 2350 // c_rarg0 - source array address 2351 // c_rarg1 - destination array address 2352 // c_rarg2 - byte count, treated as ssize_t, can be zero 2353 // 2354 // Examines the alignment of the operands and dispatches 2355 // to a long, int, short, or byte copy loop. 2356 // 2357 address generate_unsafe_copy(const char *name, 2358 address byte_copy_entry, address short_copy_entry, 2359 address int_copy_entry, address long_copy_entry) { 2360 2361 Label L_long_aligned, L_int_aligned, L_short_aligned; 2362 2363 // Input registers (before setup_arg_regs) 2364 const Register from = c_rarg0; // source array address 2365 const Register to = c_rarg1; // destination array address 2366 const Register size = c_rarg2; // byte count (size_t) 2367 2368 // Register used as a temp 2369 const Register bits = rax; // test copy of low bits 2370 2371 __ align(CodeEntryAlignment); 2372 StubCodeMark mark(this, "StubRoutines", name); 2373 address start = __ pc(); 2374 2375 __ enter(); // required for proper stackwalking of RuntimeStub frame 2376 2377 // bump this on entry, not on exit: 2378 inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr); 2379 2380 __ mov(bits, from); 2381 __ orptr(bits, to); 2382 __ orptr(bits, size); 2383 2384 __ testb(bits, BytesPerLong-1); 2385 __ jccb(Assembler::zero, L_long_aligned); 2386 2387 __ testb(bits, BytesPerInt-1); 2388 __ jccb(Assembler::zero, L_int_aligned); 2389 2390 __ testb(bits, BytesPerShort-1); 2391 __ jump_cc(Assembler::notZero, RuntimeAddress(byte_copy_entry)); 2392 2393 __ BIND(L_short_aligned); 2394 __ shrptr(size, LogBytesPerShort); // size => short_count 2395 __ jump(RuntimeAddress(short_copy_entry)); 2396 2397 __ BIND(L_int_aligned); 2398 __ shrptr(size, LogBytesPerInt); // size => int_count 2399 __ jump(RuntimeAddress(int_copy_entry)); 2400 2401 __ BIND(L_long_aligned); 2402 __ shrptr(size, LogBytesPerLong); // size => qword_count 2403 __ jump(RuntimeAddress(long_copy_entry)); 2404 2405 return start; 2406 } 2407 2408 // Perform range checks on the proposed arraycopy. 2409 // Kills temp, but nothing else. 2410 // Also, clean the sign bits of src_pos and dst_pos. 2411 void arraycopy_range_checks(Register src, // source array oop (c_rarg0) 2412 Register src_pos, // source position (c_rarg1) 2413 Register dst, // destination array oo (c_rarg2) 2414 Register dst_pos, // destination position (c_rarg3) 2415 Register length, 2416 Register temp, 2417 Label& L_failed) { 2418 BLOCK_COMMENT("arraycopy_range_checks:"); 2419 2420 // if (src_pos + length > arrayOop(src)->length()) FAIL; 2421 __ movl(temp, length); 2422 __ addl(temp, src_pos); // src_pos + length 2423 __ cmpl(temp, Address(src, arrayOopDesc::length_offset_in_bytes())); 2424 __ jcc(Assembler::above, L_failed); 2425 2426 // if (dst_pos + length > arrayOop(dst)->length()) FAIL; 2427 __ movl(temp, length); 2428 __ addl(temp, dst_pos); // dst_pos + length 2429 __ cmpl(temp, Address(dst, arrayOopDesc::length_offset_in_bytes())); 2430 __ jcc(Assembler::above, L_failed); 2431 2432 // Have to clean up high 32-bits of 'src_pos' and 'dst_pos'. 2433 // Move with sign extension can be used since they are positive. 2434 __ movslq(src_pos, src_pos); 2435 __ movslq(dst_pos, dst_pos); 2436 2437 BLOCK_COMMENT("arraycopy_range_checks done"); 2438 } 2439 2440 // 2441 // Generate generic array copy stubs 2442 // 2443 // Input: 2444 // c_rarg0 - src oop 2445 // c_rarg1 - src_pos (32-bits) 2446 // c_rarg2 - dst oop 2447 // c_rarg3 - dst_pos (32-bits) 2448 // not Win64 2449 // c_rarg4 - element count (32-bits) 2450 // Win64 2451 // rsp+40 - element count (32-bits) 2452 // 2453 // Output: 2454 // rax == 0 - success 2455 // rax == -1^K - failure, where K is partial transfer count 2456 // 2457 address generate_generic_copy(const char *name, 2458 address byte_copy_entry, address short_copy_entry, 2459 address int_copy_entry, address oop_copy_entry, 2460 address long_copy_entry, address checkcast_copy_entry) { 2461 2462 Label L_failed, L_failed_0, L_objArray; 2463 Label L_copy_bytes, L_copy_shorts, L_copy_ints, L_copy_longs; 2464 2465 // Input registers 2466 const Register src = c_rarg0; // source array oop 2467 const Register src_pos = c_rarg1; // source position 2468 const Register dst = c_rarg2; // destination array oop 2469 const Register dst_pos = c_rarg3; // destination position 2470#ifndef _WIN64 2471 const Register length = c_rarg4; 2472#else 2473 const Address length(rsp, 6 * wordSize); // elements count is on stack on Win64 2474#endif 2475 2476 { int modulus = CodeEntryAlignment; 2477 int target = modulus - 5; // 5 = sizeof jmp(L_failed) 2478 int advance = target - (__ offset() % modulus); 2479 if (advance < 0) advance += modulus; 2480 if (advance > 0) __ nop(advance); 2481 } 2482 StubCodeMark mark(this, "StubRoutines", name); 2483 2484 // Short-hop target to L_failed. Makes for denser prologue code. 2485 __ BIND(L_failed_0); 2486 __ jmp(L_failed); 2487 assert(__ offset() % CodeEntryAlignment == 0, "no further alignment needed"); 2488 2489 __ align(CodeEntryAlignment); 2490 address start = __ pc(); 2491 2492 __ enter(); // required for proper stackwalking of RuntimeStub frame 2493 2494 // bump this on entry, not on exit: 2495 inc_counter_np(SharedRuntime::_generic_array_copy_ctr); 2496 2497 //----------------------------------------------------------------------- 2498 // Assembler stub will be used for this call to arraycopy 2499 // if the following conditions are met: 2500 // 2501 // (1) src and dst must not be null. 2502 // (2) src_pos must not be negative. 2503 // (3) dst_pos must not be negative. 2504 // (4) length must not be negative. 2505 // (5) src klass and dst klass should be the same and not NULL. 2506 // (6) src and dst should be arrays. 2507 // (7) src_pos + length must not exceed length of src. 2508 // (8) dst_pos + length must not exceed length of dst. 2509 // 2510 2511 // if (src == NULL) return -1; 2512 __ testptr(src, src); // src oop 2513 size_t j1off = __ offset(); 2514 __ jccb(Assembler::zero, L_failed_0); 2515 2516 // if (src_pos < 0) return -1; 2517 __ testl(src_pos, src_pos); // src_pos (32-bits) 2518 __ jccb(Assembler::negative, L_failed_0); 2519 2520 // if (dst == NULL) return -1; 2521 __ testptr(dst, dst); // dst oop 2522 __ jccb(Assembler::zero, L_failed_0); 2523 2524 // if (dst_pos < 0) return -1; 2525 __ testl(dst_pos, dst_pos); // dst_pos (32-bits) 2526 size_t j4off = __ offset(); 2527 __ jccb(Assembler::negative, L_failed_0); 2528 2529 // The first four tests are very dense code, 2530 // but not quite dense enough to put four 2531 // jumps in a 16-byte instruction fetch buffer. 2532 // That's good, because some branch predicters 2533 // do not like jumps so close together. 2534 // Make sure of this. 2535 guarantee(((j1off ^ j4off) & ~15) != 0, "I$ line of 1st & 4th jumps"); 2536 2537 // registers used as temp 2538 const Register r11_length = r11; // elements count to copy 2539 const Register r10_src_klass = r10; // array klass 2540 2541 // if (length < 0) return -1; 2542 __ movl(r11_length, length); // length (elements count, 32-bits value) 2543 __ testl(r11_length, r11_length); 2544 __ jccb(Assembler::negative, L_failed_0); 2545 2546 __ load_klass(r10_src_klass, src); 2547#ifdef ASSERT 2548 // assert(src->klass() != NULL); 2549 { 2550 BLOCK_COMMENT("assert klasses not null {"); 2551 Label L1, L2; 2552 __ testptr(r10_src_klass, r10_src_klass); 2553 __ jcc(Assembler::notZero, L2); // it is broken if klass is NULL 2554 __ bind(L1); 2555 __ stop("broken null klass"); 2556 __ bind(L2); 2557 __ load_klass(rax, dst); 2558 __ cmpq(rax, 0); 2559 __ jcc(Assembler::equal, L1); // this would be broken also 2560 BLOCK_COMMENT("} assert klasses not null done"); 2561 } 2562#endif 2563 2564 // Load layout helper (32-bits) 2565 // 2566 // |array_tag| | header_size | element_type | |log2_element_size| 2567 // 32 30 24 16 8 2 0 2568 // 2569 // array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0 2570 // 2571 2572 const int lh_offset = in_bytes(Klass::layout_helper_offset()); 2573 2574 // Handle objArrays completely differently... 2575 const jint objArray_lh = Klass::array_layout_helper(T_OBJECT); 2576 __ cmpl(Address(r10_src_klass, lh_offset), objArray_lh); 2577 __ jcc(Assembler::equal, L_objArray); 2578 2579 // if (src->klass() != dst->klass()) return -1; 2580 __ load_klass(rax, dst); 2581 __ cmpq(r10_src_klass, rax); 2582 __ jcc(Assembler::notEqual, L_failed); 2583 2584 const Register rax_lh = rax; // layout helper 2585 __ movl(rax_lh, Address(r10_src_klass, lh_offset)); 2586 2587 // if (!src->is_Array()) return -1; 2588 __ cmpl(rax_lh, Klass::_lh_neutral_value); 2589 __ jcc(Assembler::greaterEqual, L_failed); 2590 2591 // At this point, it is known to be a typeArray (array_tag 0x3). 2592#ifdef ASSERT 2593 { 2594 BLOCK_COMMENT("assert primitive array {"); 2595 Label L; 2596 __ cmpl(rax_lh, (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift)); 2597 __ jcc(Assembler::greaterEqual, L); 2598 __ stop("must be a primitive array"); 2599 __ bind(L); 2600 BLOCK_COMMENT("} assert primitive array done"); 2601 } 2602#endif 2603 2604 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, 2605 r10, L_failed); 2606 2607 // typeArrayKlass 2608 // 2609 // src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize); 2610 // dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize); 2611 // 2612 2613 const Register r10_offset = r10; // array offset 2614 const Register rax_elsize = rax_lh; // element size 2615 2616 __ movl(r10_offset, rax_lh); 2617 __ shrl(r10_offset, Klass::_lh_header_size_shift); 2618 __ andptr(r10_offset, Klass::_lh_header_size_mask); // array_offset 2619 __ addptr(src, r10_offset); // src array offset 2620 __ addptr(dst, r10_offset); // dst array offset 2621 BLOCK_COMMENT("choose copy loop based on element size"); 2622 __ andl(rax_lh, Klass::_lh_log2_element_size_mask); // rax_lh -> rax_elsize 2623 2624 // next registers should be set before the jump to corresponding stub 2625 const Register from = c_rarg0; // source array address 2626 const Register to = c_rarg1; // destination array address 2627 const Register count = c_rarg2; // elements count 2628 2629 // 'from', 'to', 'count' registers should be set in such order 2630 // since they are the same as 'src', 'src_pos', 'dst'. 2631 2632 __ BIND(L_copy_bytes); 2633 __ cmpl(rax_elsize, 0); 2634 __ jccb(Assembler::notEqual, L_copy_shorts); 2635 __ lea(from, Address(src, src_pos, Address::times_1, 0));// src_addr 2636 __ lea(to, Address(dst, dst_pos, Address::times_1, 0));// dst_addr 2637 __ movl2ptr(count, r11_length); // length 2638 __ jump(RuntimeAddress(byte_copy_entry)); 2639 2640 __ BIND(L_copy_shorts); 2641 __ cmpl(rax_elsize, LogBytesPerShort); 2642 __ jccb(Assembler::notEqual, L_copy_ints); 2643 __ lea(from, Address(src, src_pos, Address::times_2, 0));// src_addr 2644 __ lea(to, Address(dst, dst_pos, Address::times_2, 0));// dst_addr 2645 __ movl2ptr(count, r11_length); // length 2646 __ jump(RuntimeAddress(short_copy_entry)); 2647 2648 __ BIND(L_copy_ints); 2649 __ cmpl(rax_elsize, LogBytesPerInt); 2650 __ jccb(Assembler::notEqual, L_copy_longs); 2651 __ lea(from, Address(src, src_pos, Address::times_4, 0));// src_addr 2652 __ lea(to, Address(dst, dst_pos, Address::times_4, 0));// dst_addr 2653 __ movl2ptr(count, r11_length); // length 2654 __ jump(RuntimeAddress(int_copy_entry)); 2655 2656 __ BIND(L_copy_longs); 2657#ifdef ASSERT 2658 { 2659 BLOCK_COMMENT("assert long copy {"); 2660 Label L; 2661 __ cmpl(rax_elsize, LogBytesPerLong); 2662 __ jcc(Assembler::equal, L); 2663 __ stop("must be long copy, but elsize is wrong"); 2664 __ bind(L); 2665 BLOCK_COMMENT("} assert long copy done"); 2666 } 2667#endif 2668 __ lea(from, Address(src, src_pos, Address::times_8, 0));// src_addr 2669 __ lea(to, Address(dst, dst_pos, Address::times_8, 0));// dst_addr 2670 __ movl2ptr(count, r11_length); // length 2671 __ jump(RuntimeAddress(long_copy_entry)); 2672 2673 // objArrayKlass 2674 __ BIND(L_objArray); 2675 // live at this point: r10_src_klass, r11_length, src[_pos], dst[_pos] 2676 2677 Label L_plain_copy, L_checkcast_copy; 2678 // test array classes for subtyping 2679 __ load_klass(rax, dst); 2680 __ cmpq(r10_src_klass, rax); // usual case is exact equality 2681 __ jcc(Assembler::notEqual, L_checkcast_copy); 2682 2683 // Identically typed arrays can be copied without element-wise checks. 2684 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, 2685 r10, L_failed); 2686 2687 __ lea(from, Address(src, src_pos, TIMES_OOP, 2688 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // src_addr 2689 __ lea(to, Address(dst, dst_pos, TIMES_OOP, 2690 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); // dst_addr 2691 __ movl2ptr(count, r11_length); // length 2692 __ BIND(L_plain_copy); 2693 __ jump(RuntimeAddress(oop_copy_entry)); 2694 2695 __ BIND(L_checkcast_copy); 2696 // live at this point: r10_src_klass, r11_length, rax (dst_klass) 2697 { 2698 // Before looking at dst.length, make sure dst is also an objArray. 2699 __ cmpl(Address(rax, lh_offset), objArray_lh); 2700 __ jcc(Assembler::notEqual, L_failed); 2701 2702 // It is safe to examine both src.length and dst.length. 2703 arraycopy_range_checks(src, src_pos, dst, dst_pos, r11_length, 2704 rax, L_failed); 2705 2706 const Register r11_dst_klass = r11; 2707 __ load_klass(r11_dst_klass, dst); // reload 2708 2709 // Marshal the base address arguments now, freeing registers. 2710 __ lea(from, Address(src, src_pos, TIMES_OOP, 2711 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); 2712 __ lea(to, Address(dst, dst_pos, TIMES_OOP, 2713 arrayOopDesc::base_offset_in_bytes(T_OBJECT))); 2714 __ movl(count, length); // length (reloaded) 2715 Register sco_temp = c_rarg3; // this register is free now 2716 assert_different_registers(from, to, count, sco_temp, 2717 r11_dst_klass, r10_src_klass); 2718 assert_clean_int(count, sco_temp); 2719 2720 // Generate the type check. 2721 const int sco_offset = in_bytes(Klass::super_check_offset_offset()); 2722 __ movl(sco_temp, Address(r11_dst_klass, sco_offset)); 2723 assert_clean_int(sco_temp, rax); 2724 generate_type_check(r10_src_klass, sco_temp, r11_dst_klass, L_plain_copy); 2725 2726 // Fetch destination element klass from the objArrayKlass header. 2727 int ek_offset = in_bytes(objArrayKlass::element_klass_offset()); 2728 __ movptr(r11_dst_klass, Address(r11_dst_klass, ek_offset)); 2729 __ movl( sco_temp, Address(r11_dst_klass, sco_offset)); 2730 assert_clean_int(sco_temp, rax); 2731 2732 // the checkcast_copy loop needs two extra arguments: 2733 assert(c_rarg3 == sco_temp, "#3 already in place"); 2734 // Set up arguments for checkcast_copy_entry. 2735 setup_arg_regs(4); 2736 __ movptr(r8, r11_dst_klass); // dst.klass.element_klass, r8 is c_rarg4 on Linux/Solaris 2737 __ jump(RuntimeAddress(checkcast_copy_entry)); 2738 } 2739 2740 __ BIND(L_failed); 2741 __ xorptr(rax, rax); 2742 __ notptr(rax); // return -1 2743 __ leave(); // required for proper stackwalking of RuntimeStub frame 2744 __ ret(0); 2745 2746 return start; 2747 } 2748 2749 void generate_arraycopy_stubs() { 2750 address entry; 2751 address entry_jbyte_arraycopy; 2752 address entry_jshort_arraycopy; 2753 address entry_jint_arraycopy; 2754 address entry_oop_arraycopy; 2755 address entry_jlong_arraycopy; 2756 address entry_checkcast_arraycopy; 2757 2758 StubRoutines::_jbyte_disjoint_arraycopy = generate_disjoint_byte_copy(false, &entry, 2759 "jbyte_disjoint_arraycopy"); 2760 StubRoutines::_jbyte_arraycopy = generate_conjoint_byte_copy(false, entry, &entry_jbyte_arraycopy, 2761 "jbyte_arraycopy"); 2762 2763 StubRoutines::_jshort_disjoint_arraycopy = generate_disjoint_short_copy(false, &entry, 2764 "jshort_disjoint_arraycopy"); 2765 StubRoutines::_jshort_arraycopy = generate_conjoint_short_copy(false, entry, &entry_jshort_arraycopy, 2766 "jshort_arraycopy"); 2767 2768 StubRoutines::_jint_disjoint_arraycopy = generate_disjoint_int_oop_copy(false, false, &entry, 2769 "jint_disjoint_arraycopy"); 2770 StubRoutines::_jint_arraycopy = generate_conjoint_int_oop_copy(false, false, entry, 2771 &entry_jint_arraycopy, "jint_arraycopy"); 2772 2773 StubRoutines::_jlong_disjoint_arraycopy = generate_disjoint_long_oop_copy(false, false, &entry, 2774 "jlong_disjoint_arraycopy"); 2775 StubRoutines::_jlong_arraycopy = generate_conjoint_long_oop_copy(false, false, entry, 2776 &entry_jlong_arraycopy, "jlong_arraycopy"); 2777 2778 2779 if (UseCompressedOops) { 2780 StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_int_oop_copy(false, true, &entry, 2781 "oop_disjoint_arraycopy"); 2782 StubRoutines::_oop_arraycopy = generate_conjoint_int_oop_copy(false, true, entry, 2783 &entry_oop_arraycopy, "oop_arraycopy"); 2784 StubRoutines::_oop_disjoint_arraycopy_uninit = generate_disjoint_int_oop_copy(false, true, &entry, 2785 "oop_disjoint_arraycopy_uninit", 2786 /*dest_uninitialized*/true); 2787 StubRoutines::_oop_arraycopy_uninit = generate_conjoint_int_oop_copy(false, true, entry, 2788 NULL, "oop_arraycopy_uninit", 2789 /*dest_uninitialized*/true); 2790 } else { 2791 StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_long_oop_copy(false, true, &entry, 2792 "oop_disjoint_arraycopy"); 2793 StubRoutines::_oop_arraycopy = generate_conjoint_long_oop_copy(false, true, entry, 2794 &entry_oop_arraycopy, "oop_arraycopy"); 2795 StubRoutines::_oop_disjoint_arraycopy_uninit = generate_disjoint_long_oop_copy(false, true, &entry, 2796 "oop_disjoint_arraycopy_uninit", 2797 /*dest_uninitialized*/true); 2798 StubRoutines::_oop_arraycopy_uninit = generate_conjoint_long_oop_copy(false, true, entry, 2799 NULL, "oop_arraycopy_uninit", 2800 /*dest_uninitialized*/true); 2801 } 2802 2803 StubRoutines::_checkcast_arraycopy = generate_checkcast_copy("checkcast_arraycopy", &entry_checkcast_arraycopy); 2804 StubRoutines::_checkcast_arraycopy_uninit = generate_checkcast_copy("checkcast_arraycopy_uninit", NULL, 2805 /*dest_uninitialized*/true); 2806 2807 StubRoutines::_unsafe_arraycopy = generate_unsafe_copy("unsafe_arraycopy", 2808 entry_jbyte_arraycopy, 2809 entry_jshort_arraycopy, 2810 entry_jint_arraycopy, 2811 entry_jlong_arraycopy); 2812 StubRoutines::_generic_arraycopy = generate_generic_copy("generic_arraycopy", 2813 entry_jbyte_arraycopy, 2814 entry_jshort_arraycopy, 2815 entry_jint_arraycopy, 2816 entry_oop_arraycopy, 2817 entry_jlong_arraycopy, 2818 entry_checkcast_arraycopy); 2819 2820 StubRoutines::_jbyte_fill = generate_fill(T_BYTE, false, "jbyte_fill"); 2821 StubRoutines::_jshort_fill = generate_fill(T_SHORT, false, "jshort_fill"); 2822 StubRoutines::_jint_fill = generate_fill(T_INT, false, "jint_fill"); 2823 StubRoutines::_arrayof_jbyte_fill = generate_fill(T_BYTE, true, "arrayof_jbyte_fill"); 2824 StubRoutines::_arrayof_jshort_fill = generate_fill(T_SHORT, true, "arrayof_jshort_fill"); 2825 StubRoutines::_arrayof_jint_fill = generate_fill(T_INT, true, "arrayof_jint_fill"); 2826 2827 // We don't generate specialized code for HeapWord-aligned source 2828 // arrays, so just use the code we've already generated 2829 StubRoutines::_arrayof_jbyte_disjoint_arraycopy = StubRoutines::_jbyte_disjoint_arraycopy; 2830 StubRoutines::_arrayof_jbyte_arraycopy = StubRoutines::_jbyte_arraycopy; 2831 2832 StubRoutines::_arrayof_jshort_disjoint_arraycopy = StubRoutines::_jshort_disjoint_arraycopy; 2833 StubRoutines::_arrayof_jshort_arraycopy = StubRoutines::_jshort_arraycopy; 2834 2835 StubRoutines::_arrayof_jint_disjoint_arraycopy = StubRoutines::_jint_disjoint_arraycopy; 2836 StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy; 2837 2838 StubRoutines::_arrayof_jlong_disjoint_arraycopy = StubRoutines::_jlong_disjoint_arraycopy; 2839 StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy; 2840 2841 StubRoutines::_arrayof_oop_disjoint_arraycopy = StubRoutines::_oop_disjoint_arraycopy; 2842 StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy; 2843 2844 StubRoutines::_arrayof_oop_disjoint_arraycopy_uninit = StubRoutines::_oop_disjoint_arraycopy_uninit; 2845 StubRoutines::_arrayof_oop_arraycopy_uninit = StubRoutines::_oop_arraycopy_uninit; 2846 } 2847 2848 void generate_math_stubs() { 2849 { 2850 StubCodeMark mark(this, "StubRoutines", "log"); 2851 StubRoutines::_intrinsic_log = (double (*)(double)) __ pc(); 2852 2853 __ subq(rsp, 8); 2854 __ movdbl(Address(rsp, 0), xmm0); 2855 __ fld_d(Address(rsp, 0)); 2856 __ flog(); 2857 __ fstp_d(Address(rsp, 0)); 2858 __ movdbl(xmm0, Address(rsp, 0)); 2859 __ addq(rsp, 8); 2860 __ ret(0); 2861 } 2862 { 2863 StubCodeMark mark(this, "StubRoutines", "log10"); 2864 StubRoutines::_intrinsic_log10 = (double (*)(double)) __ pc(); 2865 2866 __ subq(rsp, 8); 2867 __ movdbl(Address(rsp, 0), xmm0); 2868 __ fld_d(Address(rsp, 0)); 2869 __ flog10(); 2870 __ fstp_d(Address(rsp, 0)); 2871 __ movdbl(xmm0, Address(rsp, 0)); 2872 __ addq(rsp, 8); 2873 __ ret(0); 2874 } 2875 { 2876 StubCodeMark mark(this, "StubRoutines", "sin"); 2877 StubRoutines::_intrinsic_sin = (double (*)(double)) __ pc(); 2878 2879 __ subq(rsp, 8); 2880 __ movdbl(Address(rsp, 0), xmm0); 2881 __ fld_d(Address(rsp, 0)); 2882 __ trigfunc('s'); 2883 __ fstp_d(Address(rsp, 0)); 2884 __ movdbl(xmm0, Address(rsp, 0)); 2885 __ addq(rsp, 8); 2886 __ ret(0); 2887 } 2888 { 2889 StubCodeMark mark(this, "StubRoutines", "cos"); 2890 StubRoutines::_intrinsic_cos = (double (*)(double)) __ pc(); 2891 2892 __ subq(rsp, 8); 2893 __ movdbl(Address(rsp, 0), xmm0); 2894 __ fld_d(Address(rsp, 0)); 2895 __ trigfunc('c'); 2896 __ fstp_d(Address(rsp, 0)); 2897 __ movdbl(xmm0, Address(rsp, 0)); 2898 __ addq(rsp, 8); 2899 __ ret(0); 2900 } 2901 { 2902 StubCodeMark mark(this, "StubRoutines", "tan"); 2903 StubRoutines::_intrinsic_tan = (double (*)(double)) __ pc(); 2904 2905 __ subq(rsp, 8); 2906 __ movdbl(Address(rsp, 0), xmm0); 2907 __ fld_d(Address(rsp, 0)); 2908 __ trigfunc('t'); 2909 __ fstp_d(Address(rsp, 0)); 2910 __ movdbl(xmm0, Address(rsp, 0)); 2911 __ addq(rsp, 8); 2912 __ ret(0); 2913 } 2914 { 2915 StubCodeMark mark(this, "StubRoutines", "exp"); 2916 StubRoutines::_intrinsic_exp = (double (*)(double)) __ pc(); 2917 2918 __ subq(rsp, 8); 2919 __ movdbl(Address(rsp, 0), xmm0); 2920 __ fld_d(Address(rsp, 0)); 2921 __ exp_with_fallback(0); 2922 __ fstp_d(Address(rsp, 0)); 2923 __ movdbl(xmm0, Address(rsp, 0)); 2924 __ addq(rsp, 8); 2925 __ ret(0); 2926 } 2927 { 2928 StubCodeMark mark(this, "StubRoutines", "pow"); 2929 StubRoutines::_intrinsic_pow = (double (*)(double,double)) __ pc(); 2930 2931 __ subq(rsp, 8); 2932 __ movdbl(Address(rsp, 0), xmm1); 2933 __ fld_d(Address(rsp, 0)); 2934 __ movdbl(Address(rsp, 0), xmm0); 2935 __ fld_d(Address(rsp, 0)); 2936 __ pow_with_fallback(0); 2937 __ fstp_d(Address(rsp, 0)); 2938 __ movdbl(xmm0, Address(rsp, 0)); 2939 __ addq(rsp, 8); 2940 __ ret(0); 2941 } 2942 } 2943 2944#undef __ 2945#define __ masm-> 2946 2947 // Continuation point for throwing of implicit exceptions that are 2948 // not handled in the current activation. Fabricates an exception 2949 // oop and initiates normal exception dispatching in this 2950 // frame. Since we need to preserve callee-saved values (currently 2951 // only for C2, but done for C1 as well) we need a callee-saved oop 2952 // map and therefore have to make these stubs into RuntimeStubs 2953 // rather than BufferBlobs. If the compiler needs all registers to 2954 // be preserved between the fault point and the exception handler 2955 // then it must assume responsibility for that in 2956 // AbstractCompiler::continuation_for_implicit_null_exception or 2957 // continuation_for_implicit_division_by_zero_exception. All other 2958 // implicit exceptions (e.g., NullPointerException or 2959 // AbstractMethodError on entry) are either at call sites or 2960 // otherwise assume that stack unwinding will be initiated, so 2961 // caller saved registers were assumed volatile in the compiler. 2962 address generate_throw_exception(const char* name, 2963 address runtime_entry, 2964 Register arg1 = noreg, 2965 Register arg2 = noreg) { 2966 // Information about frame layout at time of blocking runtime call. 2967 // Note that we only have to preserve callee-saved registers since 2968 // the compilers are responsible for supplying a continuation point 2969 // if they expect all registers to be preserved. 2970 enum layout { 2971 rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt, 2972 rbp_off2, 2973 return_off, 2974 return_off2, 2975 framesize // inclusive of return address 2976 }; 2977 2978 int insts_size = 512; 2979 int locs_size = 64; 2980 2981 CodeBuffer code(name, insts_size, locs_size); 2982 OopMapSet* oop_maps = new OopMapSet(); 2983 MacroAssembler* masm = new MacroAssembler(&code); 2984 2985 address start = __ pc(); 2986 2987 // This is an inlined and slightly modified version of call_VM 2988 // which has the ability to fetch the return PC out of 2989 // thread-local storage and also sets up last_Java_sp slightly 2990 // differently than the real call_VM 2991 2992 __ enter(); // required for proper stackwalking of RuntimeStub frame 2993 2994 assert(is_even(framesize/2), "sp not 16-byte aligned"); 2995 2996 // return address and rbp are already in place 2997 __ subptr(rsp, (framesize-4) << LogBytesPerInt); // prolog 2998 2999 int frame_complete = __ pc() - start; 3000 3001 // Set up last_Java_sp and last_Java_fp 3002 address the_pc = __ pc(); 3003 __ set_last_Java_frame(rsp, rbp, the_pc); 3004 __ andptr(rsp, -(StackAlignmentInBytes)); // Align stack 3005 3006 // Call runtime 3007 if (arg1 != noreg) { 3008 assert(arg2 != c_rarg1, "clobbered"); 3009 __ movptr(c_rarg1, arg1); 3010 } 3011 if (arg2 != noreg) { 3012 __ movptr(c_rarg2, arg2); 3013 } 3014 __ movptr(c_rarg0, r15_thread); 3015 BLOCK_COMMENT("call runtime_entry"); 3016 __ call(RuntimeAddress(runtime_entry)); 3017 3018 // Generate oop map 3019 OopMap* map = new OopMap(framesize, 0); 3020 3021 oop_maps->add_gc_map(the_pc - start, map); 3022 3023 __ reset_last_Java_frame(true, true); 3024 3025 __ leave(); // required for proper stackwalking of RuntimeStub frame 3026 3027 // check for pending exceptions 3028#ifdef ASSERT 3029 Label L; 3030 __ cmpptr(Address(r15_thread, Thread::pending_exception_offset()), 3031 (int32_t) NULL_WORD); 3032 __ jcc(Assembler::notEqual, L); 3033 __ should_not_reach_here(); 3034 __ bind(L); 3035#endif // ASSERT 3036 __ jump(RuntimeAddress(StubRoutines::forward_exception_entry())); 3037 3038 3039 // codeBlob framesize is in words (not VMRegImpl::slot_size) 3040 RuntimeStub* stub = 3041 RuntimeStub::new_runtime_stub(name, 3042 &code, 3043 frame_complete, 3044 (framesize >> (LogBytesPerWord - LogBytesPerInt)), 3045 oop_maps, false); 3046 return stub->entry_point(); 3047 } 3048 3049 // Initialization 3050 void generate_initial() { 3051 // Generates all stubs and initializes the entry points 3052 3053 // This platform-specific stub is needed by generate_call_stub() 3054 StubRoutines::x86::_mxcsr_std = generate_fp_mask("mxcsr_std", 0x0000000000001F80); 3055 3056 // entry points that exist in all platforms Note: This is code 3057 // that could be shared among different platforms - however the 3058 // benefit seems to be smaller than the disadvantage of having a 3059 // much more complicated generator structure. See also comment in 3060 // stubRoutines.hpp. 3061 3062 StubRoutines::_forward_exception_entry = generate_forward_exception(); 3063 3064 StubRoutines::_call_stub_entry = 3065 generate_call_stub(StubRoutines::_call_stub_return_address); 3066 3067 // is referenced by megamorphic call 3068 StubRoutines::_catch_exception_entry = generate_catch_exception(); 3069 3070 // atomic calls 3071 StubRoutines::_atomic_xchg_entry = generate_atomic_xchg(); 3072 StubRoutines::_atomic_xchg_ptr_entry = generate_atomic_xchg_ptr(); 3073 StubRoutines::_atomic_cmpxchg_entry = generate_atomic_cmpxchg(); 3074 StubRoutines::_atomic_cmpxchg_long_entry = generate_atomic_cmpxchg_long(); 3075 StubRoutines::_atomic_add_entry = generate_atomic_add(); 3076 StubRoutines::_atomic_add_ptr_entry = generate_atomic_add_ptr(); 3077 StubRoutines::_fence_entry = generate_orderaccess_fence(); 3078 3079 StubRoutines::_handler_for_unsafe_access_entry = 3080 generate_handler_for_unsafe_access(); 3081 3082 // platform dependent 3083 StubRoutines::x86::_get_previous_fp_entry = generate_get_previous_fp(); 3084 StubRoutines::x86::_get_previous_sp_entry = generate_get_previous_sp(); 3085 3086 StubRoutines::x86::_verify_mxcsr_entry = generate_verify_mxcsr(); 3087 3088 // Build this early so it's available for the interpreter. 3089 StubRoutines::_throw_StackOverflowError_entry = 3090 generate_throw_exception("StackOverflowError throw_exception", 3091 CAST_FROM_FN_PTR(address, 3092 SharedRuntime:: 3093 throw_StackOverflowError)); 3094 } 3095 3096 void generate_all() { 3097 // Generates all stubs and initializes the entry points 3098 3099 // These entry points require SharedInfo::stack0 to be set up in 3100 // non-core builds and need to be relocatable, so they each 3101 // fabricate a RuntimeStub internally. 3102 StubRoutines::_throw_AbstractMethodError_entry = 3103 generate_throw_exception("AbstractMethodError throw_exception", 3104 CAST_FROM_FN_PTR(address, 3105 SharedRuntime:: 3106 throw_AbstractMethodError)); 3107 3108 StubRoutines::_throw_IncompatibleClassChangeError_entry = 3109 generate_throw_exception("IncompatibleClassChangeError throw_exception", 3110 CAST_FROM_FN_PTR(address, 3111 SharedRuntime:: 3112 throw_IncompatibleClassChangeError)); 3113 3114 StubRoutines::_throw_NullPointerException_at_call_entry = 3115 generate_throw_exception("NullPointerException at call throw_exception", 3116 CAST_FROM_FN_PTR(address, 3117 SharedRuntime:: 3118 throw_NullPointerException_at_call)); 3119 3120 // entry points that are platform specific 3121 StubRoutines::x86::_f2i_fixup = generate_f2i_fixup(); 3122 StubRoutines::x86::_f2l_fixup = generate_f2l_fixup(); 3123 StubRoutines::x86::_d2i_fixup = generate_d2i_fixup(); 3124 StubRoutines::x86::_d2l_fixup = generate_d2l_fixup(); 3125 3126 StubRoutines::x86::_float_sign_mask = generate_fp_mask("float_sign_mask", 0x7FFFFFFF7FFFFFFF); 3127 StubRoutines::x86::_float_sign_flip = generate_fp_mask("float_sign_flip", 0x8000000080000000); 3128 StubRoutines::x86::_double_sign_mask = generate_fp_mask("double_sign_mask", 0x7FFFFFFFFFFFFFFF); 3129 StubRoutines::x86::_double_sign_flip = generate_fp_mask("double_sign_flip", 0x8000000000000000); 3130 3131 // support for verify_oop (must happen after universe_init) 3132 StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop(); 3133 3134 // arraycopy stubs used by compilers 3135 generate_arraycopy_stubs(); 3136 3137 generate_math_stubs(); 3138 } 3139 3140 public: 3141 StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) { 3142 if (all) { 3143 generate_all(); 3144 } else { 3145 generate_initial(); 3146 } 3147 } 3148}; // end class declaration 3149 3150void StubGenerator_generate(CodeBuffer* code, bool all) { 3151 StubGenerator g(code, all); 3152} 3153