runtime_sparc.cpp revision 1879:f95d63e2154a
1/*
2 * Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.
3 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
4 *
5 * This code is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 only, as
7 * published by the Free Software Foundation.
8 *
9 * This code is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
12 * version 2 for more details (a copy is included in the LICENSE file that
13 * accompanied this code).
14 *
15 * You should have received a copy of the GNU General Public License version
16 * 2 along with this work; if not, write to the Free Software Foundation,
17 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
18 *
19 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
20 * or visit www.oracle.com if you need additional information or have any
21 * questions.
22 *
23 */
24
25#include "precompiled.hpp"
26#ifdef COMPILER2
27#include "asm/assembler.hpp"
28#include "assembler_sparc.inline.hpp"
29#include "classfile/systemDictionary.hpp"
30#include "code/vmreg.hpp"
31#include "interpreter/interpreter.hpp"
32#include "nativeInst_sparc.hpp"
33#include "opto/runtime.hpp"
34#include "runtime/interfaceSupport.hpp"
35#include "runtime/sharedRuntime.hpp"
36#include "runtime/stubRoutines.hpp"
37#include "runtime/vframeArray.hpp"
38#include "utilities/globalDefinitions.hpp"
39#include "vmreg_sparc.inline.hpp"
40#endif
41
42
43#define __ masm->
44
45ExceptionBlob      *OptoRuntime::_exception_blob;
46
47//------------------------------ generate_exception_blob ---------------------------
48// creates exception blob at the end
49// Using exception blob, this code is jumped from a compiled method.
50// (see emit_exception_handler in sparc.ad file)
51//
52// Given an exception pc at a call we call into the runtime for the
53// handler in this method. This handler might merely restore state
54// (i.e. callee save registers) unwind the frame and jump to the
55// exception handler for the nmethod if there is no Java level handler
56// for the nmethod.
57//
58// This code is entered with a jmp.
59//
60// Arguments:
61//   O0: exception oop
62//   O1: exception pc
63//
64// Results:
65//   O0: exception oop
66//   O1: exception pc in caller or ???
67//   destination: exception handler of caller
68//
69// Note: the exception pc MUST be at a call (precise debug information)
70//
71void OptoRuntime::generate_exception_blob() {
72  // allocate space for code
73  ResourceMark rm;
74  int pad = VerifyThread ? 256 : 0;// Extra slop space for more verify code
75
76  // setup code generation tools
77  // Measured 8/7/03 at 256 in 32bit debug build (no VerifyThread)
78  // Measured 8/7/03 at 528 in 32bit debug build (VerifyThread)
79  CodeBuffer buffer("exception_blob", 600+pad, 512);
80  MacroAssembler* masm     = new MacroAssembler(&buffer);
81
82  int framesize_in_bytes = __ total_frame_size_in_bytes(0);
83  int framesize_in_words = framesize_in_bytes / wordSize;
84  int framesize_in_slots = framesize_in_bytes / sizeof(jint);
85
86  Label L;
87
88  int start = __ offset();
89
90  __ verify_thread();
91  __ st_ptr(Oexception,  G2_thread, JavaThread::exception_oop_offset());
92  __ st_ptr(Oissuing_pc, G2_thread, JavaThread::exception_pc_offset());
93
94  // This call does all the hard work. It checks if an exception catch
95  // exists in the method.
96  // If so, it returns the handler address.
97  // If the nmethod has been deoptimized and it had a handler the handler
98  // address is the deopt blob unpack_with_exception entry.
99  //
100  // If no handler exists it prepares for stack-unwinding, restoring the callee-save
101  // registers of the frame being removed.
102  //
103  __ save_frame(0);
104
105  __ mov(G2_thread, O0);
106  __ set_last_Java_frame(SP, noreg);
107  __ save_thread(L7_thread_cache);
108
109  // This call can block at exit and nmethod can be deoptimized at that
110  // point. If the nmethod had a catch point we would jump to the
111  // now deoptimized catch point and fall thru the vanilla deopt
112  // path and lose the exception
113  // Sure would be simpler if this call didn't block!
114  __ call(CAST_FROM_FN_PTR(address, OptoRuntime::handle_exception_C), relocInfo::runtime_call_type);
115  __ delayed()->mov(L7_thread_cache, O0);
116
117  // Set an oopmap for the call site.  This oopmap will only be used if we
118  // are unwinding the stack.  Hence, all locations will be dead.
119  // Callee-saved registers will be the same as the frame above (i.e.,
120  // handle_exception_stub), since they were restored when we got the
121  // exception.
122
123  OopMapSet *oop_maps = new OopMapSet();
124  oop_maps->add_gc_map( __ offset()-start, new OopMap(framesize_in_slots, 0));
125
126  __ bind(L);
127  __ restore_thread(L7_thread_cache);
128  __ reset_last_Java_frame();
129
130  __ mov(O0, G3_scratch);             // Move handler address to temp
131  __ restore();
132
133  // Restore SP from L7 if the exception PC is a MethodHandle call site.
134  __ lduw(Address(G2_thread, JavaThread::is_method_handle_return_offset()), O7);
135  __ tst(O7);
136  __ movcc(Assembler::notZero, false, Assembler::icc, L7_mh_SP_save, SP);
137
138  // G3_scratch contains handler address
139  // Since this may be the deopt blob we must set O7 to look like we returned
140  // from the original pc that threw the exception
141
142  __ ld_ptr(G2_thread, JavaThread::exception_pc_offset(), O7);
143  __ sub(O7, frame::pc_return_offset, O7);
144
145
146  assert(Assembler::is_simm13(in_bytes(JavaThread::exception_oop_offset())), "exception offset overflows simm13, following ld instruction cannot be in delay slot");
147  __ ld_ptr(G2_thread, JavaThread::exception_oop_offset(), Oexception); // O0
148#ifdef ASSERT
149  __ st_ptr(G0, G2_thread, JavaThread::exception_handler_pc_offset());
150  __ st_ptr(G0, G2_thread, JavaThread::exception_pc_offset());
151#endif
152  __ JMP(G3_scratch, 0);
153  // Clear the exception oop so GC no longer processes it as a root.
154  __ delayed()->st_ptr(G0, G2_thread, JavaThread::exception_oop_offset());
155
156  // -------------
157  // make sure all code is generated
158  masm->flush();
159
160  _exception_blob = ExceptionBlob::create(&buffer, oop_maps, framesize_in_words);
161}
162