Makefile revision 1169:980f315286b9
1# 2# Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved. 3# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 4# 5# This code is free software; you can redistribute it and/or modify it 6# under the terms of the GNU General Public License version 2 only, as 7# published by the Free Software Foundation. Oracle designates this 8# particular file as subject to the "Classpath" exception as provided 9# by Oracle in the LICENSE file that accompanied this code. 10# 11# This code is distributed in the hope that it will be useful, but WITHOUT 12# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 13# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 14# version 2 for more details (a copy is included in the LICENSE file that 15# accompanied this code). 16# 17# You should have received a copy of the GNU General Public License version 18# 2 along with this work; if not, write to the Free Software Foundation, 19# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 20# 21# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 22# or visit www.oracle.com if you need additional information or have any 23# questions. 24# 25 26# This must be the first rule 27default: 28 29# Inclusion of this pseudo-target will cause make to execute this file 30# serially, regardless of -j. Recursively called makefiles will not be 31# affected, however. This is required for correct dependency management. 32.NOTPARALLEL: 33 34# The shell code below will be executed on /usr/ccs/bin/make on Solaris, but not in GNU make. 35# /usr/ccs/bin/make lacks basically every other flow control mechanism. 36TEST_FOR_NON_GNUMAKE:sh=echo You are not using GNU make/gmake, this is a requirement. Check your path. 1>&2 && exit 1 37 38# Assume we have GNU make, but check version. 39ifeq ($(strip $(foreach v, 3.81% 3.82% 4.%, $(filter $v, $(MAKE_VERSION)))), ) 40 $(error This version of GNU Make is too low ($(MAKE_VERSION)). Check your path, or upgrade to 3.81 or newer.) 41endif 42 43# Locate this Makefile 44ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),) 45 makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST)) 46else 47 makefile_path:=$(lastword $(MAKEFILE_LIST)) 48endif 49root_dir:=$(dir $(makefile_path)) 50 51# ... and then we can include our helper functions 52include $(root_dir)/make/MakeHelpers.gmk 53 54$(eval $(call ParseLogLevel)) 55$(eval $(call ParseConfAndSpec)) 56 57# Now determine if we have zero, one or several configurations to build. 58ifeq ($(SPEC),) 59 # Since we got past ParseConfAndSpec, we must be building a global target. Do nothing. 60else 61 # In Cygwin, the MAKE variable gets messed up if the make executable is called with 62 # a Windows mixed path (c:/cygwin/bin/make.exe). If that's the case, fix it by removing 63 # the prepended root_dir. 64 ifneq ($(findstring :, $(MAKE)), ) 65 MAKE := $(patsubst $(root_dir)%, %, $(MAKE)) 66 endif 67 68 # We are potentially building multiple configurations. 69 # First, find out the valid targets 70 # Run the makefile with an arbitrary SPEC using -p -q (quiet dry-run and dump rules) to find 71 # available PHONY targets. Use this list as valid targets to pass on to the repeated calls. 72 all_phony_targets := $(sort $(filter-out $(global_targets), $(strip $(shell \ 73 cd $(root_dir)/make && $(MAKE) -f Main.gmk -p -q FRC SPEC=$(firstword $(SPEC)) \ 74 -I $(root_dir)/make/common | grep "^.PHONY:" | head -n 1 | cut -d " " -f 2-)))) 75 76 # Loop through the configurations and call the main-wrapper for each one. The wrapper 77 # target will execute with a single configuration loaded. 78 $(all_phony_targets): 79 @$(if $(TARGET_RUN),,\ 80 $(foreach spec,$(SPEC),\ 81 (cd $(root_dir) && $(MAKE) SPEC=$(spec) MAIN_TARGETS="$(call GetRealTarget)" \ 82 $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) main-wrapper) &&) true) 83 @echo > /dev/null 84 $(eval TARGET_RUN=true) 85 86 .PHONY: $(all_phony_targets) 87 88 ifneq ($(MAIN_TARGETS), ) 89 # The wrapper target was called so we now have a single configuration. Load the spec file 90 # and call the real Main.gmk. 91 include $(SPEC) 92 93 ### Clean up from previous run 94 # Remove any build.log from a previous run, if they exist 95 ifneq (,$(BUILD_LOG)) 96 ifneq (,$(BUILD_LOG_PREVIOUS)) 97 # Rotate old log 98 $(shell $(RM) $(BUILD_LOG_PREVIOUS) 2> /dev/null) 99 $(shell $(MV) $(BUILD_LOG) $(BUILD_LOG_PREVIOUS) 2> /dev/null) 100 else 101 $(shell $(RM) $(BUILD_LOG) 2> /dev/null) 102 endif 103 $(shell $(RM) $(OUTPUT_ROOT)/build-trace-time.log 2> /dev/null) 104 endif 105 # Remove any javac server logs and port files. This 106 # prevents a new make run to reuse the previous servers. 107 ifneq (,$(SJAVAC_SERVER_DIR)) 108 $(shell $(MKDIR) -p $(SJAVAC_SERVER_DIR) && $(RM) -rf $(SJAVAC_SERVER_DIR)/*) 109 endif 110 111 # Split out the targets requiring sequential execution. Run these targets separately 112 # from the rest so that the rest may still enjoy full parallel execution. 113 SEQUENTIAL_TARGETS := $(filter dist-clean clean% reconfigure, $(MAIN_TARGETS)) 114 PARALLEL_TARGETS := $(filter-out $(SEQUENTIAL_TARGETS), $(MAIN_TARGETS)) 115 116 main-wrapper: 117 ifneq ($(SEQUENTIAL_TARGETS), ) 118 (cd $(SRC_ROOT)/make && $(MAKE) -f Main.gmk SPEC=$(SPEC) -j 1 \ 119 $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) $(SEQUENTIAL_TARGETS)) 120 endif 121 ifneq ($(PARALLEL_TARGETS), ) 122 @$(call AtMakeStart) 123 (cd $(SRC_ROOT)/make && $(BUILD_LOG_WRAPPER) $(MAKE) -f Main.gmk SPEC=$(SPEC) -j $(JOBS) \ 124 $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) $(PARALLEL_TARGETS) \ 125 $(if $(filter true, $(OUTPUT_SYNC_SUPPORTED)), -O$(OUTPUT_SYNC))) 126 @$(call AtMakeEnd) 127 endif 128 129 .PHONY: main-wrapper 130 131 endif 132endif 133 134# Here are "global" targets, i.e. targets that can be executed without specifying a single configuration. 135# If you add more global targets, please update the variable global_targets in MakeHelpers. 136 137help: 138 $(info ) 139 $(info OpenJDK Makefile help) 140 $(info =====================) 141 $(info ) 142 $(info Common make targets) 143 $(info . make [default] # Compile all modules in langtools, hotspot, jaxp, jaxws,) 144 $(info . # corba and jdk and create a runnable "exploded" image) 145 $(info . make all # Compile everything, all repos, docs and images) 146 $(info . make images # Create complete j2sdk and j2re images) 147 $(info . make docs # Create all docs) 148 $(info . make docs-javadoc # Create just javadocs, depends on less than full docs) 149 $(info . make profiles # Create complete j2re compact profile images) 150 $(info . make bootcycle-images # Build images twice, second time with newly built JDK) 151 $(info . make install # Install the generated images locally) 152 $(info . make reconfigure # Rerun configure with the same arguments as last time) 153 $(info . make clean # Remove all files generated by make, but not those) 154 $(info . # generated by configure) 155 $(info . make dist-clean # Remove all files, including configuration) 156 $(info . make help # Give some help on using make) 157 $(info . make test # Run tests, default is all tests (see TEST below)) 158 $(info ) 159 $(info Targets for specific modules) 160 $(info . make <module> # Build <module> and everything it depends on. ) 161 $(info . make <module>-only # Build <module> only, without dependencies. This) 162 $(info . # is faster but can result in incorrect build results!) 163 $(info . make <module>-java # Compile java classes for <module> and everything it) 164 $(info . # depends on) 165 $(info . make <module>-libs # Build native libraries for <module> and everything it) 166 $(info . # depends on) 167 $(info . make <module>-launchers# Build native executables for <module> and everything it) 168 $(info . # depends on) 169 $(info . make <module>-gensrc # Execute the gensrc step for <module> and everything it) 170 $(info . # depends on) 171 $(info ) 172 $(info Useful make variables) 173 $(info . make CONF= # Build all configurations (note, assignment is empty)) 174 $(info . make CONF=<substring> # Build the configuration(s) with a name matching) 175 $(info . # <substring>) 176 $(info ) 177 $(info . make LOG=<loglevel> # Change the log level from warn to <loglevel>) 178 $(info . # Available log levels are:) 179 $(info . # 'warn' (default), 'info', 'debug' and 'trace') 180 $(info . # To see executed command lines, use LOG=debug) 181 $(info ) 182 $(info . make JOBS=<n> # Run <n> parallel make jobs) 183 $(info . # Note that -jN does not work as expected!) 184 $(info ) 185 $(info . make test TEST=<test> # Only run the given test or tests, e.g.) 186 $(info . # make test TEST="jdk_lang jdk_net") 187 $(info ) 188 189.PHONY: help 190