in6_src.c revision 1.74
1/*	$OpenBSD: in6_src.c,v 1.74 2016/06/30 12:36:27 mpi Exp $	*/
2/*	$KAME: in6_src.c,v 1.36 2001/02/06 04:08:17 itojun Exp $	*/
3
4/*
5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 *    notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 *    notice, this list of conditions and the following disclaimer in the
15 *    documentation and/or other materials provided with the distribution.
16 * 3. Neither the name of the project nor the names of its contributors
17 *    may be used to endorse or promote products derived from this software
18 *    without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
23 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * SUCH DAMAGE.
31 */
32
33/*
34 * Copyright (c) 1982, 1986, 1991, 1993
35 *	The Regents of the University of California.  All rights reserved.
36 *
37 * Redistribution and use in source and binary forms, with or without
38 * modification, are permitted provided that the following conditions
39 * are met:
40 * 1. Redistributions of source code must retain the above copyright
41 *    notice, this list of conditions and the following disclaimer.
42 * 2. Redistributions in binary form must reproduce the above copyright
43 *    notice, this list of conditions and the following disclaimer in the
44 *    documentation and/or other materials provided with the distribution.
45 * 3. Neither the name of the University nor the names of its contributors
46 *    may be used to endorse or promote products derived from this software
47 *    without specific prior written permission.
48 *
49 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
50 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
51 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
52 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
53 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
54 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
55 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
56 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
57 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
58 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
59 * SUCH DAMAGE.
60 *
61 *	@(#)in_pcb.c	8.2 (Berkeley) 1/4/94
62 */
63
64#include <sys/param.h>
65#include <sys/systm.h>
66#include <sys/mbuf.h>
67#include <sys/protosw.h>
68#include <sys/socket.h>
69#include <sys/socketvar.h>
70#include <sys/ioctl.h>
71#include <sys/errno.h>
72#include <sys/time.h>
73
74#include <net/if.h>
75#include <net/if_var.h>
76#include <net/route.h>
77
78#include <netinet/in.h>
79#include <netinet/ip.h>
80#include <netinet/in_pcb.h>
81#include <netinet6/in6_var.h>
82#include <netinet/ip6.h>
83#include <netinet6/ip6_var.h>
84#include <netinet6/nd6.h>
85
86int in6_selectif(struct sockaddr_in6 *, struct ip6_pktopts *,
87    struct ip6_moptions *, struct route_in6 *, struct ifnet **, u_int);
88
89/*
90 * Return an IPv6 address, which is the most appropriate for a given
91 * destination and user specified options.
92 * If necessary, this function lookups the routing table and returns
93 * an entry to the caller for later use.
94 */
95int
96in6_selectsrc(struct in6_addr **in6src, struct sockaddr_in6 *dstsock,
97    struct ip6_pktopts *opts, struct ip6_moptions *mopts,
98    struct route_in6 *ro, struct in6_addr *laddr, u_int rtableid)
99{
100	struct ifnet *ifp = NULL;
101	struct in6_addr *dst;
102	struct in6_ifaddr *ia6 = NULL;
103	struct in6_pktinfo *pi = NULL;
104	int	error;
105
106	dst = &dstsock->sin6_addr;
107
108	/*
109	 * If the source address is explicitly specified by the caller,
110	 * check if the requested source address is indeed a unicast address
111	 * assigned to the node, and can be used as the packet's source
112	 * address.  If everything is okay, use the address as source.
113	 */
114	if (opts && (pi = opts->ip6po_pktinfo) &&
115	    !IN6_IS_ADDR_UNSPECIFIED(&pi->ipi6_addr)) {
116		struct sockaddr_in6 sa6;
117
118		/* get the outgoing interface */
119		error = in6_selectif(dstsock, opts, mopts, ro, &ifp, rtableid);
120		if (error)
121			return (error);
122
123		bzero(&sa6, sizeof(sa6));
124		sa6.sin6_family = AF_INET6;
125		sa6.sin6_len = sizeof(sa6);
126		sa6.sin6_addr = pi->ipi6_addr;
127
128		if (ifp && IN6_IS_SCOPE_EMBED(&sa6.sin6_addr))
129			sa6.sin6_addr.s6_addr16[1] = htons(ifp->if_index);
130		if_put(ifp); /* put reference from in6_selectif */
131
132		ia6 = ifatoia6(ifa_ifwithaddr(sin6tosa(&sa6), rtableid));
133		if (ia6 == NULL ||
134		    (ia6->ia6_flags & (IN6_IFF_ANYCAST | IN6_IFF_NOTREADY)))
135			return (EADDRNOTAVAIL);
136
137		pi->ipi6_addr = sa6.sin6_addr; /* XXX: this overrides pi */
138
139		*in6src = &pi->ipi6_addr;
140		return (0);
141	}
142
143	/*
144	 * If the source address is not specified but the socket(if any)
145	 * is already bound, use the bound address.
146	 */
147	if (laddr && !IN6_IS_ADDR_UNSPECIFIED(laddr)) {
148		*in6src = laddr;
149		return (0);
150	}
151
152	/*
153	 * If the caller doesn't specify the source address but
154	 * the outgoing interface, use an address associated with
155	 * the interface.
156	 */
157	if (pi && pi->ipi6_ifindex) {
158		ifp = if_get(pi->ipi6_ifindex);
159		if (ifp == NULL)
160			return (ENXIO); /* XXX: better error? */
161
162		ia6 = in6_ifawithscope(ifp, dst, rtableid);
163		if_put(ifp);
164
165		if (ia6 == NULL)
166			return (EADDRNOTAVAIL);
167
168		*in6src = &ia6->ia_addr.sin6_addr;
169		return (0);
170	}
171
172	/*
173	 * If the destination address is a link-local unicast address or
174	 * a link/interface-local multicast address, and if the outgoing
175	 * interface is specified by the sin6_scope_id filed, use an address
176	 * associated with the interface.
177	 * XXX: We're now trying to define more specific semantics of
178	 *      sin6_scope_id field, so this part will be rewritten in
179	 *      the near future.
180	 */
181	if ((IN6_IS_ADDR_LINKLOCAL(dst) || IN6_IS_ADDR_MC_LINKLOCAL(dst) ||
182	     IN6_IS_ADDR_MC_INTFACELOCAL(dst)) && dstsock->sin6_scope_id) {
183		ifp = if_get(dstsock->sin6_scope_id);
184		if (ifp == NULL)
185			return (ENXIO); /* XXX: better error? */
186
187		ia6 = in6_ifawithscope(ifp, dst, rtableid);
188		if_put(ifp);
189
190		if (ia6 == NULL)
191			return (EADDRNOTAVAIL);
192
193		*in6src = &ia6->ia_addr.sin6_addr;
194		return (0);
195	}
196
197	/*
198	 * If the destination address is a multicast address and
199	 * the outgoing interface for the address is specified
200	 * by the caller, use an address associated with the interface.
201	 * Even if the outgoing interface is not specified, we also
202	 * choose a loopback interface as the outgoing interface.
203	 */
204	if (IN6_IS_ADDR_MULTICAST(dst)) {
205		ifp = mopts ? if_get(mopts->im6o_ifidx) : NULL;
206
207		if (!ifp && dstsock->sin6_scope_id)
208			ifp = if_get(htons(dstsock->sin6_scope_id));
209
210		if (ifp) {
211			ia6 = in6_ifawithscope(ifp, dst, rtableid);
212			if_put(ifp);
213
214			if (ia6 == NULL)
215				return (EADDRNOTAVAIL);
216
217			*in6src = &ia6->ia_addr.sin6_addr;
218			return (0);
219		}
220	}
221
222	/*
223	 * If route is known or can be allocated now,
224	 * our src addr is taken from the i/f, else punt.
225	 */
226	if (ro) {
227		if (!rtisvalid(ro->ro_rt) || (ro->ro_tableid != rtableid) ||
228		    !IN6_ARE_ADDR_EQUAL(&ro->ro_dst.sin6_addr, dst)) {
229			rtfree(ro->ro_rt);
230			ro->ro_rt = NULL;
231		}
232		if (ro->ro_rt == NULL) {
233			struct sockaddr_in6 *sa6;
234
235			/* No route yet, so try to acquire one */
236			bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
237			ro->ro_tableid = rtableid;
238			sa6 = &ro->ro_dst;
239			sa6->sin6_family = AF_INET6;
240			sa6->sin6_len = sizeof(struct sockaddr_in6);
241			sa6->sin6_addr = *dst;
242			sa6->sin6_scope_id = dstsock->sin6_scope_id;
243			ro->ro_rt = rtalloc(sin6tosa(&ro->ro_dst),
244			    RT_RESOLVE, ro->ro_tableid);
245		}
246
247		/*
248		 * in_pcbconnect() checks out IFF_LOOPBACK to skip using
249		 * the address. But we don't know why it does so.
250		 * It is necessary to ensure the scope even for lo0
251		 * so doesn't check out IFF_LOOPBACK.
252		 */
253
254		if (ro->ro_rt) {
255			ifp = if_get(ro->ro_rt->rt_ifidx);
256			if (ifp != NULL) {
257				ia6 = in6_ifawithscope(ifp, dst, rtableid);
258				if_put(ifp);
259			}
260			if (ia6 == NULL) { /* xxx scope error ?*/
261				*in6src =
262				    &satosin6(ro->ro_rt->rt_addr)->sin6_addr;
263				return (0);
264			}
265		}
266		if (ia6 == NULL)
267			return (EHOSTUNREACH);	/* no route */
268
269		*in6src = &ia6->ia_addr.sin6_addr;
270		return (0);
271	}
272
273	return (EADDRNOTAVAIL);
274}
275
276struct rtentry *
277in6_selectroute(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
278    struct route_in6 *ro, unsigned int rtableid)
279{
280	struct in6_addr *dst;
281
282	dst = &dstsock->sin6_addr;
283
284	/*
285	 * Use a cached route if it exists and is valid, else try to allocate
286	 * a new one.  Note that we should check the address family of the
287	 * cached destination, in case of sharing the cache with IPv4.
288	 */
289	if (ro) {
290		if (!rtisvalid(ro->ro_rt) ||
291		     sin6tosa(&ro->ro_dst)->sa_family != AF_INET6 ||
292		     !IN6_ARE_ADDR_EQUAL(&ro->ro_dst.sin6_addr, dst)) {
293			rtfree(ro->ro_rt);
294			ro->ro_rt = NULL;
295		}
296		if (ro->ro_rt == NULL) {
297			struct sockaddr_in6 *sa6;
298
299			/* No route yet, so try to acquire one */
300			bzero(&ro->ro_dst, sizeof(struct sockaddr_in6));
301			ro->ro_tableid = rtableid;
302			sa6 = &ro->ro_dst;
303			*sa6 = *dstsock;
304			sa6->sin6_scope_id = 0;
305			ro->ro_tableid = rtableid;
306			ro->ro_rt = rtalloc_mpath(sin6tosa(&ro->ro_dst),
307			    NULL, ro->ro_tableid);
308		}
309
310		/*
311		 * Check if the outgoing interface conflicts with
312		 * the interface specified by ipi6_ifindex (if specified).
313		 * Note that loopback interface is always okay.
314		 * (this may happen when we are sending a packet to one of
315		 *  our own addresses.)
316		 */
317		if (opts && opts->ip6po_pktinfo &&
318		    opts->ip6po_pktinfo->ipi6_ifindex) {
319			if (ro->ro_rt != NULL &&
320			    !ISSET(ro->ro_rt->rt_flags, RTF_LOCAL) &&
321			    ro->ro_rt->rt_ifidx !=
322			    opts->ip6po_pktinfo->ipi6_ifindex) {
323			    	return (NULL);
324			}
325		}
326
327		return (ro->ro_rt);
328	}
329
330	return (NULL);
331}
332
333int
334in6_selectif(struct sockaddr_in6 *dstsock, struct ip6_pktopts *opts,
335    struct ip6_moptions *mopts, struct route_in6 *ro, struct ifnet **retifp,
336    u_int rtableid)
337{
338	struct rtentry *rt = NULL;
339	struct in6_pktinfo *pi = NULL;
340
341	/* If the caller specify the outgoing interface explicitly, use it. */
342	if (opts && (pi = opts->ip6po_pktinfo) != NULL && pi->ipi6_ifindex) {
343		*retifp = if_get(pi->ipi6_ifindex);
344		if (*retifp != NULL)
345			return (0);
346	}
347
348	/*
349	 * If the destination address is a multicast address and the outgoing
350	 * interface for the address is specified by the caller, use it.
351	 */
352	if (IN6_IS_ADDR_MULTICAST(&dstsock->sin6_addr) &&
353	    mopts != NULL && (*retifp = if_get(mopts->im6o_ifidx)) != NULL)
354	    	return (0);
355
356	rt = in6_selectroute(dstsock, opts, ro, rtableid);
357	if (rt == NULL)
358		return (EHOSTUNREACH);
359
360	/*
361	 * do not use a rejected or black hole route.
362	 * XXX: this check should be done in the L2 output routine.
363	 * However, if we skipped this check here, we'd see the following
364	 * scenario:
365	 * - install a rejected route for a scoped address prefix
366	 *   (like fe80::/10)
367	 * - send a packet to a destination that matches the scoped prefix,
368	 *   with ambiguity about the scope zone.
369	 * - pick the outgoing interface from the route, and disambiguate the
370	 *   scope zone with the interface.
371	 * - ip6_output() would try to get another route with the "new"
372	 *   destination, which may be valid.
373	 * - we'd see no error on output.
374	 * Although this may not be very harmful, it should still be confusing.
375	 * We thus reject the case here.
376	 */
377	if (rt && (rt->rt_flags & (RTF_REJECT | RTF_BLACKHOLE)))
378		return (rt->rt_flags & RTF_HOST ? EHOSTUNREACH : ENETUNREACH);
379
380	if (rt != NULL)
381		*retifp = if_get(rt->rt_ifidx);
382
383	return (0);
384}
385
386int
387in6_selecthlim(struct inpcb *in6p)
388{
389	if (in6p && in6p->inp_hops >= 0)
390		return (in6p->inp_hops);
391
392	return (ip6_defhlim);
393}
394
395/*
396 * generate kernel-internal form (scopeid embedded into s6_addr16[1]).
397 * If the address scope of is link-local, embed the interface index in the
398 * address.  The routine determines our precedence
399 * between advanced API scope/interface specification and basic API
400 * specification.
401 *
402 * this function should be nuked in the future, when we get rid of
403 * embedded scopeid thing.
404 *
405 * XXX actually, it is over-specification to return ifp against sin6_scope_id.
406 * there can be multiple interfaces that belong to a particular scope zone
407 * (in specification, we have 1:N mapping between a scope zone and interfaces).
408 * we may want to change the function to return something other than ifp.
409 */
410int
411in6_embedscope(struct in6_addr *in6, const struct sockaddr_in6 *sin6,
412    struct inpcb *in6p)
413{
414	struct ifnet *ifp = NULL;
415	u_int32_t scopeid;
416
417	*in6 = sin6->sin6_addr;
418	scopeid = sin6->sin6_scope_id;
419
420	/*
421	 * don't try to read sin6->sin6_addr beyond here, since the caller may
422	 * ask us to overwrite existing sockaddr_in6
423	 */
424
425	if (IN6_IS_SCOPE_EMBED(in6)) {
426		struct in6_pktinfo *pi;
427
428		/*
429		 * KAME assumption: link id == interface id
430		 */
431
432		if (in6p && in6p->inp_outputopts6 &&
433		    (pi = in6p->inp_outputopts6->ip6po_pktinfo) &&
434		    pi->ipi6_ifindex) {
435			ifp = if_get(pi->ipi6_ifindex);
436			if (ifp == NULL)
437				return ENXIO;  /* XXX EINVAL? */
438			in6->s6_addr16[1] = htons(pi->ipi6_ifindex);
439		} else if (in6p && IN6_IS_ADDR_MULTICAST(in6) &&
440		    in6p->inp_moptions6 &&
441		    (ifp = if_get(in6p->inp_moptions6->im6o_ifidx))) {
442			in6->s6_addr16[1] = htons(ifp->if_index);
443		} else if (scopeid) {
444			ifp = if_get(scopeid);
445			if (ifp == NULL)
446				return ENXIO;  /* XXX EINVAL? */
447			/*XXX assignment to 16bit from 32bit variable */
448			in6->s6_addr16[1] = htons(scopeid & 0xffff);
449		}
450		if_put(ifp);
451	}
452
453	return 0;
454}
455
456/*
457 * generate standard sockaddr_in6 from embedded form.
458 * touches sin6_addr and sin6_scope_id only.
459 *
460 * this function should be nuked in the future, when we get rid of
461 * embedded scopeid thing.
462 */
463void
464in6_recoverscope(struct sockaddr_in6 *sin6, const struct in6_addr *in6)
465{
466	u_int32_t scopeid;
467
468	sin6->sin6_addr = *in6;
469
470	/*
471	 * don't try to read *in6 beyond here, since the caller may
472	 * ask us to overwrite existing sockaddr_in6
473	 */
474
475	sin6->sin6_scope_id = 0;
476	if (IN6_IS_SCOPE_EMBED(in6)) {
477		/*
478		 * KAME assumption: link id == interface id
479		 */
480		scopeid = ntohs(sin6->sin6_addr.s6_addr16[1]);
481		if (scopeid) {
482			sin6->sin6_addr.s6_addr16[1] = 0;
483			sin6->sin6_scope_id = scopeid;
484		}
485	}
486}
487
488/*
489 * just clear the embedded scope identifer.
490 */
491void
492in6_clearscope(struct in6_addr *addr)
493{
494	if (IN6_IS_SCOPE_EMBED(addr))
495		addr->s6_addr16[1] = 0;
496}
497