spifreg.h revision 1.2
1/* $OpenBSD: spifreg.h,v 1.2 2002/04/08 17:49:42 jason Exp $ */ 2 3/* 4 * Copyright (c) 1999-2002 Jason L. Wright (jason@thought.net) 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Jason L. Wright 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 23 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, 25 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 26 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 27 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 29 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 30 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 * POSSIBILITY OF SUCH DAMAGE. 32 * 33 * Effort sponsored in part by the Defense Advanced Research Projects 34 * Agency (DARPA) and Air Force Research Laboratory, Air Force 35 * Materiel Command, USAF, under agreement number F30602-01-2-0537. 36 * 37 */ 38 39#define PPC_IN_PDATA 0x000 /* input data */ 40#define PPC_IN_PSTAT 0x001 /* input status */ 41#define PPC_IN_CTRL 0x002 /* input control */ 42#define PPC_IN_PWEIRD 0x003 /* input weird */ 43#define PPC_OUT_PDATA 0x000 /* output data */ 44#define PPC_OUT_PSTAT 0x001 /* output status */ 45#define PPC_OUT_PCTRL 0x002 /* output control */ 46#define PPC_OUT_PWEIRD 0x003 /* output weird */ 47#define PPC_IACK_PDATA 0x1fc /* iack data */ 48#define PPC_IACK_PSTAT 0x1fd /* iack status */ 49#define PPC_IACK_PCTRL 0x1fe /* iack control */ 50#define PPC_IACK_PWEIRD 0x1ff /* iack weird */ 51 52/* Parallel Status: read only */ 53#define PPC_PSTAT_ERROR 0x08 /* error */ 54#define PPC_PSTAT_SELECT 0x10 /* select */ 55#define PPC_PSTAT_PAPER 0x20 /* paper out */ 56#define PPC_PSTAT_ACK 0x40 /* ack */ 57#define PPC_PSTAT_BUSY 0x80 /* busy */ 58 59/* Parallel Control: read/write */ 60#define PPC_CTRL_STROBE 0x01 /* strobe, 1=drop strobe */ 61#define PPC_CTRL_AFX 0x02 /* auto form-feed */ 62#define PPC_CTRL_INIT 0x04 /* init, 1=enable printer */ 63#define PPC_CTRL_SLCT 0x08 /* SLC, 1=select printer */ 64#define PPC_CTRL_IRQE 0x10 /* IRQ, 1=enable intrs */ 65#define PPC_CTRL_OUTPUT 0x20 /* direction: 1=ppc out */ 66 67/* 68 * The 'stc' is a Cirrus Logic CL-CD180 (either revision B or revision C) 69 */ 70#define STC_CCR 0x01 /* channel command */ 71#define STC_SRER 0x02 /* service request enable */ 72#define STC_COR1 0x03 /* channel option 1 */ 73#define STC_COR2 0x04 /* channel option 2 */ 74#define STC_COR3 0x05 /* channel option 3 */ 75#define STC_CCSR 0x06 /* channel control status */ 76#define STC_RDCR 0x07 /* rx data count */ 77#define STC_SCHR1 0x09 /* special character 1 */ 78#define STC_SCHR2 0x0a /* special character 2 */ 79#define STC_SCHR3 0x0b /* special character 3 */ 80#define STC_SCHR4 0x0c /* special character 4 */ 81#define STC_MCOR1 0x10 /* modem change option 1 */ 82#define STC_MCOR2 0x11 /* modem change option 2 */ 83#define STC_MCR 0x12 /* modem change */ 84#define STC_RTPR 0x18 /* rx timeout period */ 85#define STC_MSVR 0x28 /* modem signal value */ 86#define STC_MSVRTS 0x29 /* modem signal value rts */ 87#define STC_MSVDTR 0x2a /* modem signal value dtr */ 88#define STC_RBPRH 0x31 /* rx bit rate period high */ 89#define STC_RBPRL 0x32 /* rx bit rate period low */ 90#define STC_RBR 0x33 /* rx bit */ 91#define STC_TBPRH 0x39 /* tx bit rate period high */ 92#define STC_TBPRL 0x3a /* tx bit rate period low */ 93#define STC_GSVR 0x40 /* global service vector */ 94#define STC_GSCR1 0x41 /* global service channel 1 */ 95#define STC_GSCR2 0x42 /* global service channel 2 */ 96#define STC_GSCR3 0x43 /* global service channel 3 */ 97#define STC_MSMR 0x61 /* modem service match */ 98#define STC_TSMR 0x62 /* tx service match */ 99#define STC_RSMR 0x63 /* rx service match */ 100#define STC_CAR 0x64 /* channel access */ 101#define STC_SRSR 0x65 /* service request status */ 102#define STC_SRCR 0x66 /* service request config */ 103#define STC_GFRCR 0x6b /* global firmware rev code */ 104#define STC_PPRH 0x70 /* prescalar period high */ 105#define STC_PPRL 0x71 /* prescalar period low */ 106#define STC_MRAR 0x75 /* modem request ack */ 107#define STC_TRAR 0x76 /* tx request ack */ 108#define STC_RRAR 0x77 /* rx request ack */ 109#define STC_RDR 0x78 /* rx data */ 110#define STC_RCSR 0x7a /* rx character status */ 111#define STC_TDR 0x7b /* tx data */ 112#define STC_EOSRR 0x7f /* end of service */ 113 114#define STC_REGMAPSIZE 0x80 115 116/* Global Firmware Revision Code Register (rw) */ 117#define CD180_GFRCR_REV_B 0x81 /* CL-CD180B */ 118#define CD180_GFRCR_REV_C 0x82 /* CL-CD180C */ 119 120/* Service Request Configuration Register (rw) (CD180C or higher) */ 121#define CD180_SRCR_PKGTYP 0x80 /* pkg type,0=PLCC,1=PQFP */ 122#define CD180_SRCR_REGACKEN 0x40 /* register ack enable */ 123#define CD180_SRCR_DAISYEN 0x20 /* daisy chain enable */ 124#define CD180_SRCR_GLOBPRI 0x10 /* global priority */ 125#define CD180_SRCR_UNFAIR 0x08 /* use unfair interrupts */ 126#define CD180_SRCR_AUTOPRI 0x02 /* automatic priority */ 127#define CD180_SRCR_PRISEL 0x01 /* select rx/tx as high pri */ 128 129/* Prescalar Period Register High (rw) */ 130#define CD180_PPRH 0xf0 /* high byte */ 131#define CD180_PPRL 0x00 /* low byte */ 132 133/* Global Service Vector Register (rw) */ 134/* Modem Request Acknowledgement Register (ro) (and IACK equivalent) */ 135/* Receive Request Acknowledgement Register (ro) (and IACK equivalent) */ 136/* Transmit Request Acknowledgement Register (ro) (and IACK equivalent) */ 137#define CD180_GSVR_USERMASK 0xf8 /* user defined bits */ 138#define CD180_GSVR_IMASK 0x07 /* interrupt type mask */ 139#define CD180_GSVR_NOREQUEST 0x00 /* no request pending */ 140#define CD180_GSVR_STATCHG 0x01 /* modem signal change */ 141#define CD180_GSVR_TXDATA 0x02 /* tx service request */ 142#define CD180_GSVR_RXGOOD 0x03 /* rx service request */ 143#define CD180_GSVR_reserved1 0x04 /* reserved */ 144#define CD180_GSVR_reserved2 0x05 /* reserved */ 145#define CD180_GSVR_reserved3 0x06 /* reserved */ 146#define CD180_GSVR_RXEXCEPTION 0x07 /* rx exception request */ 147 148/* Service Request Status Register (ro) (CD180C and higher) */ 149#define CD180_SRSR_MREQINT 0x01 /* modem request internal */ 150#define CD180_SRSR_MREQEXT 0x02 /* modem request external */ 151#define CD180_SRSR_TREQINT 0x04 /* tx request internal */ 152#define CD180_SRSR_TREQEXT 0x08 /* tx request external */ 153#define CD180_SRSR_RREQINT 0x10 /* rx request internal */ 154#define CD180_SRSR_RREQEXT 0x20 /* rx request external */ 155#define CD180_SRSR_ILV_MASK 0xc0 /* internal service context */ 156#define CD180_SRSR_ILV_NONE 0x00 /* not in service context */ 157#define CD180_SRSR_ILV_RX 0xc0 /* in rx service context */ 158#define CD180_SRSR_ILV_TX 0x80 /* in tx service context */ 159#define CD180_SRSR_ILV_MODEM 0x40 /* in modem service context */ 160 161/* Global Service Channel Register 1,2,3 (rw) */ 162#define CD180_GSCR_CHANNEL(gscr) (((gscr) >> 2) & 7) 163 164/* Receive Data Count Register (ro) */ 165#define CD180_RDCR_MASK 0x0f /* mask for fifo length */ 166 167/* Receive Character Status Register (ro) */ 168#define CD180_RCSR_TO 0x80 /* time out */ 169#define CD180_RCSR_SCD2 0x40 /* special char detect 2 */ 170#define CD180_RCSR_SCD1 0x20 /* special char detect 1 */ 171#define CD180_RCSR_SCD0 0x10 /* special char detect 0 */ 172#define CD180_RCSR_BE 0x08 /* break exception */ 173#define CD180_RCSR_PE 0x04 /* parity exception */ 174#define CD180_RCSR_FE 0x02 /* framing exception */ 175#define CD180_RCSR_OE 0x01 /* overrun exception */ 176 177/* Service Request Enable Register (rw) */ 178#define CD180_SRER_DSR 0x80 /* DSR service request */ 179#define CD180_SRER_CD 0x40 /* CD service request */ 180#define CD180_SRER_CTS 0x20 /* CTS service request */ 181#define CD180_SRER_RXD 0x10 /* RXD service request */ 182#define CD180_SRER_RXSCD 0x08 /* RX special char request */ 183#define CD180_SRER_TXD 0x04 /* TX ready service request */ 184#define CD180_SRER_TXE 0x02 /* TX empty service request */ 185#define CD180_SRER_NNDT 0x01 /* No new data timeout req */ 186 187/* Channel Command Register (rw) */ 188/* Reset Channel Command */ 189#define CD180_CCR_CMD_RESET 0x80 /* chip/channel reset */ 190#define CD180_CCR_RESETALL 0x01 /* global reset */ 191#define CD180_CCR_RESETCHAN 0x00 /* current channel reset */ 192/* Channel Option Register Command */ 193#define CD180_CCR_CMD_COR 0x40 /* channel opt reg changed */ 194#define CD180_CCR_CORCHG1 0x02 /* cor1 has changed */ 195#define CD180_CCR_CORCHG2 0x04 /* cor2 has changed */ 196#define CD180_CCR_CORCHG3 0x08 /* cor3 has changed */ 197/* Send Special Character Command */ 198#define CD180_CCR_CMD_SPC 0x20 /* send special chars changed */ 199#define CD180_CCR_SSPC0 0x01 /* send special char 0 change */ 200#define CD180_CCR_SSPC1 0x02 /* send special char 1 change */ 201#define CD180_CCR_SSPC2 0x04 /* send special char 2 change */ 202/* Channel Control Command */ 203#define CD180_CCR_CMD_CHAN 0x10 /* channel control command */ 204#define CD180_CCR_CHAN_TXEN 0x08 /* enable channel tx */ 205#define CD180_CCR_CHAN_TXDIS 0x04 /* disable channel tx */ 206#define CD180_CCR_CHAN_RXEN 0x02 /* enable channel rx */ 207#define CD180_CCR_CHAN_RXDIS 0x01 /* disable channel rx */ 208 209/* Channel Option Register 1 (rw) */ 210#define CD180_COR1_EVENPAR 0x00 /* even parity */ 211#define CD180_COR1_ODDPAR 0x80 /* odd parity */ 212#define CD180_COR1_PARMODE_NO 0x00 /* no parity */ 213#define CD180_COR1_PARMODE_FORCE 0x20 /* force (odd=1, even=0) */ 214#define CD180_COR1_PARMODE_NORMAL 0x40 /* normal parity mode */ 215#define CD180_COR1_PARMODE_NA 0x60 /* notused */ 216#define CD180_COR1_IGNPAR 0x10 /* ignore parity */ 217#define CD180_COR1_STOP1 0x00 /* 1 stop bit */ 218#define CD180_COR1_STOP15 0x04 /* 1.5 stop bits */ 219#define CD180_COR1_STOP2 0x08 /* 2 stop bits */ 220#define CD180_COR1_STOP25 0x0c /* 2.5 stop bits */ 221#define CD180_COR1_CS5 0x00 /* 5 bit characters */ 222#define CD180_COR1_CS6 0x01 /* 6 bit characters */ 223#define CD180_COR1_CS7 0x02 /* 7 bit characters */ 224#define CD180_COR1_CS8 0x03 /* 8 bit characters */ 225 226/* Channel Option Register 2 (rw) */ 227#define CD180_COR2_IXM 0x80 /* implied xon mode */ 228#define CD180_COR2_TXIBE 0x40 /* tx in-band flow control */ 229#define CD180_COR2_ETC 0x20 /* embedded tx command enbl */ 230#define CD180_COR2_LLM 0x10 /* local loopback mode */ 231#define CD180_COR2_RLM 0x08 /* remote loopback mode */ 232#define CD180_COR2_RTSAO 0x04 /* RTS automatic output enbl */ 233#define CD180_COR2_CTSAE 0x02 /* CTS automatic enable */ 234#define CD180_COR2_DSRAE 0x01 /* DSR automatic enable */ 235 236/* Channel Option Register 3 (rw) */ 237#define CD180_COR3_XON2 0x80 /* XON char in spc1&3 */ 238#define CD180_COR3_XON1 0x00 /* XON char in spc1 */ 239#define CD180_COR3_XOFF2 0x40 /* XOFF char in spc2&4 */ 240#define CD180_COR3_XOFF1 0x00 /* XOFF char in spc2 */ 241#define CD180_COR3_FCT 0x20 /* flow control transparency */ 242#define CD180_COR3_SCDE 0x10 /* special char recognition */ 243#define CD180_COR3_RXFIFO_MASK 0x0f /* rx fifo threshold */ 244 245/* Channel Control Status Register (ro) */ 246#define CD180_CCSR_RXEN 0x80 /* rx is enabled */ 247#define CD180_CCSR_RXFLOFF 0x40 /* rx flow-off */ 248#define CD180_CCSR_RXFLON 0x20 /* rx flow-on */ 249#define CD180_CCSR_TXEN 0x08 /* tx is enabled */ 250#define CD180_CCSR_TXFLOFF 0x04 /* tx flow-off */ 251#define CD180_CCSR_TXFLON 0x02 /* tx flow-on */ 252 253/* Receiver Bit Register (ro) */ 254#define CD180_RBR_RXD 0x40 /* state of RxD pin */ 255#define CD180_RBR_STARTHUNT 0x20 /* looking for start bit */ 256 257/* Modem Change Register (rw) */ 258#define CD180_MCR_DSR 0x80 /* DSR changed */ 259#define CD180_MCR_CD 0x40 /* CD changed */ 260#define CD180_MCR_CTS 0x20 /* CTS changed */ 261 262/* Modem Change Option Register 1 (rw) */ 263#define CD180_MCOR1_DSRZD 0x80 /* catch 0->1 DSR changes */ 264#define CD180_MCOR1_CDZD 0x40 /* catch 0->1 CD changes */ 265#define CD180_MCOR1_CTSZD 0x40 /* catch 0->1 CTS changes */ 266#define CD180_MCOR1_DTRTHRESH 0x0f /* DTR threshold mask */ 267 268/* Modem Change Option Register 2 (rw) */ 269#define CD180_MCOR2_DSROD 0x80 /* catch 1->0 DSR changes */ 270#define CD180_MCOR2_CDOD 0x40 /* catch 1->0 CD changes */ 271#define CD180_MCOR2_CTSOD 0x20 /* catch 1->0 CTS changes */ 272 273/* Modem Signal Value Register (rw) */ 274#define CD180_MSVR_DSR 0x80 /* DSR input state */ 275#define CD180_MSVR_CD 0x40 /* CD input state */ 276#define CD180_MSVR_CTS 0x20 /* CTS input state */ 277#define CD180_MSVR_DTR 0x02 /* DTR output state */ 278#define CD180_MSVR_RTS 0x01 /* RTS output state */ 279 280/* Modem Signal Value Register - Request To Send (w) (CD180C and higher) */ 281#define CD180_MSVRTS_RTS 0x01 /* RTS signal value */ 282 283/* Modem Signal Value Register - Data Terminal Ready (w) (CD180C and higher) */ 284#define CD180_MSVDTR_DTR 0x02 /* DTR signal value */ 285 286/* 287 * The register map for the SUNW,spif looks something like: 288 * Offset: Function: 289 * 0000 - 03ff Boot ROM 290 * 0400 - 0407 dtr latches (one per port) 291 * 0409 - 07ff unused 292 * 0800 - 087f CD180 registers (normal mapping) 293 * 0880 - 0bff unused 294 * 0c00 - 0c7f CD180 registers (*iack mapping) 295 * 0c80 - 0dff unused 296 * 0e00 - 1fff PPC registers 297 * 298 * One note about the DTR latches: The values stored there are reversed. 299 * By writing a 1 to the latch, DTR is lowered, and by writing a 0, DTR 300 * is raised. The latches cannot be read, and no other value can be written 301 * there or the system will crash due to "excessive bus loading (see 302 * SBus loading and capacitance spec)" 303 * 304 * The *iack registers are read/written with the IACK bit set. When 305 * the interrupt routine starts, it reads the MRAR, TRAR, and RRAR registers 306 * from this mapping. This signals an interrupt acknowlegement cycle. 307 * (NOTE: these are not really the MRAR, TRAR, and RRAR... They are copies 308 * of the GSVR, I just mapped them to the same location as the mrar, trar, 309 * and rrar because it seemed appropriate). 310 */ 311#define DTR_REG_OFFSET 0x400 /* DTR latches */ 312#define DTR_REG_LEN 0x8 313#define STC_REG_OFFSET 0x800 /* normal cd180 access */ 314#define STC_REG_LEN 0x80 315#define ISTC_REG_OFFSET 0xc00 /* IACK cd180 access */ 316#define ISTC_REG_LEN STC_REG_LEN 317#define PPC_REG_OFFSET 0xe00 /* PPC registers */ 318#define PPC_REG_LEN 0x200 319 320/* 321 * The mapping of minor device number -> card and port is done as 322 * follows by default: 323 * 324 * +---+---+---+---+---+---+---+---+ 325 * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 326 * +---+---+---+---+---+---+---+---+ 327 * | | | | | | | | 328 * | | | | | +---+---+---> port number 329 * | | | | | 330 * | | | | +---------------> unused 331 * | | | | 332 * | | | +-------------------> dialout (on tty ports) 333 * | | | 334 * | | +-----------------------> unused 335 * | | 336 * +---+---------------------------> card number 337 * 338 */ 339#define SPIF_MAX_CARDS 4 340#define SPIF_MAX_TTY 8 341#define SPIF_MAX_BPP 1 342 343/* 344 * device selectors 345 */ 346#define SPIF_CARD(x) ((minor(x) >> 6) & 0x03) 347#define SPIF_PORT(x) (minor(x) & 0x07) 348#define STTY_DIALOUT(x) (minor(x) & 0x10) 349 350#define STTY_RX_FIFO_THRESHOLD 4 351#define STTY_RX_DTR_THRESHOLD 7 352#define CD180_TX_FIFO_SIZE 8 /* 8 chars of fifo */ 353 354/* 355 * These are the offsets of the MRAR, TRAR, and RRAR in *IACK space. 356 * The high bit must be set as per specs for the MSMR, TSMR, and RSMR. 357 */ 358#define SPIF_MSMR (0x80 | STC_MRAR) /* offset of MRAR | 0x80 */ 359#define SPIF_TSMR (0x80 | STC_TRAR) /* offset of TRAR | 0x80 */ 360#define SPIF_RSMR (0x80 | STC_RRAR) /* offset of RRAR | 0x80 */ 361 362/* 363 * "verosc" node tells which oscillator we have. 364 */ 365#define SPIF_OSC9 1 /* 9.8304 Mhz */ 366#define SPIF_OSC10 2 /* 10Mhz */ 367 368/* 369 * There are two interrupts, serial gets interrupt[0], and parallel 370 * gets interrupt[1] 371 */ 372#define SERIAL_INTR 0 373#define PARALLEL_INTR 1 374 375/* 376 * spif tty flags 377 */ 378#define STTYF_CDCHG 0x01 /* carrier changed */ 379#define STTYF_RING_OVERFLOW 0x02 /* ring buffer overflowed */ 380#define STTYF_DONE 0x04 /* done... flush buffers */ 381#define STTYF_SET_BREAK 0x08 /* set break signal */ 382#define STTYF_CLR_BREAK 0x10 /* clear break signal */ 383#define STTYF_STOP 0x20 /* stopped */ 384 385#define STTY_RBUF_SIZE (2 * 512) 386