1/* $OpenBSD: pciidereg.h,v 1.10 2013/11/26 20:33:17 deraadt Exp $ */ 2/* $NetBSD: pciidereg.h,v 1.6 2000/11/14 18:42:58 thorpej Exp $ */ 3 4/* 5 * Copyright (c) 1998 Christopher G. Demetriou. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Christopher G. Demetriou 18 * for the NetBSD Project. 19 * 4. The name of the author may not be used to endorse or promote products 20 * derived from this software without specific prior written permission 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 24 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 25 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34#ifndef _DEV_PCI_PCIIDEREG_H_ 35#define _DEV_PCI_PCIIDEREG_H_ 36 37/* 38 * PCI IDE controller register definitions. 39 * 40 * Author: Christopher G. Demetriou, March 2, 1998. 41 * 42 * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and 43 * "Programming Interface for Bus Master IDE Controller, Revision 1.0 44 * 5/16/94" from the PCI SIG. 45 */ 46 47/* 48 * Number of channels per chip. MUST NOT CHANGE (macros in pciide.c and 49 * this file depend on its value). 50 */ 51#define PCIIDE_NUM_CHANNELS 2 52 53/* 54 * PCI base address register locations (some are per-channel). 55 */ 56#define PCIIDE_REG_CMD_BASE(chan) (0x10 + (8 * (chan))) 57#define PCIIDE_REG_CTL_BASE(chan) (0x14 + (8 * (chan))) 58#define PCIIDE_REG_BUS_MASTER_DMA 0x20 59 60/* 61 * Bits in the PCI Programming Interface register (some are per-channel). 62 * Bits 6-4 are defined as read-only in PCI 2.1 specification. 63 * Microsoft proposed to use these bits for independent channels 64 * enable/disable. This feature is enabled based on the value of bit 6. 65 */ 66#define PCIIDE_CHANSTATUS_EN 0x40 67#define PCIIDE_CHAN_EN(chan) (0x20 >> (chan)) 68#define PCIIDE_INTERFACE_PCI(chan) (0x01 << (2 * (chan))) 69#define PCIIDE_INTERFACE_SETTABLE(chan) (0x02 << (2 * (chan))) 70#define PCIIDE_INTERFACE_BUS_MASTER_DMA 0x80 71 72/* 73 * Compatibility address/IRQ definitions (some are per-channel). 74 */ 75#define PCIIDE_COMPAT_CMD_BASE(chan) ((chan) == 0 ? 0x1f0 : 0x170) 76#define PCIIDE_COMPAT_CMD_SIZE 8 77#define PCIIDE_COMPAT_CTL_BASE(chan) ((chan) == 0 ? 0x3f6 : 0x376) 78#define PCIIDE_COMPAT_CTL_SIZE 1 79#define PCIIDE_COMPAT_IRQ(chan) ((chan) == 0 ? 14 : 15) 80 81#define PCIIDE_CHANNEL_NAME(chan) ((chan) == 0 ? "channel 0" : "channel 1") 82 83/* 84 * definitions for IDE DMA 85 * XXX maybe this should go elsewhere 86 */ 87 88/* secondary channel registers offset */ 89#define IDEDMA_SCH_OFFSET 0x08 90#define IDEDMA_NREGS 8 91 92/* Bus master command register (per channel) */ 93#define IDEDMA_CMD(chan) (0x00 + IDEDMA_SCH_OFFSET * (chan)) 94#define IDEDMA_CMD_WRITE 0x08 95#define IDEDMA_CMD_START 0x01 96 97/* Bus master status register (per channel) */ 98#define IDEDMA_CTL(chan) (0x02 + IDEDMA_SCH_OFFSET * (chan)) 99#define IDEDMA_CTL_DRV_DMA(d) (0x20 << (d)) 100#define IDEDMA_CTL_INTR 0x04 101#define IDEDMA_CTL_ERR 0x02 102#define IDEDMA_CTL_ACT 0x01 103 104/* Bus master table pointer register (per channel) */ 105#define IDEDMA_TBL(chan) (0x04 + IDEDMA_SCH_OFFSET * (chan)) 106#define IDEDMA_TBL_MASK 0xfffffffc 107#define IDEDMA_TBL_ALIGN 0x00010000 108 109/* bus master table descriptor */ 110struct idedma_table { 111 u_int32_t base_addr; /* physical base addr of memory region */ 112 u_int32_t byte_count; /* memory region length */ 113#define IDEDMA_BYTE_COUNT_MASK 0x0000FFFF 114#define IDEDMA_BYTE_COUNT_EOT 0x80000000 115}; 116 117#define IDEDMA_BYTE_COUNT_MAX 0x00010000 /* Max I/O per table */ 118#define IDEDMA_BYTE_COUNT_ALIGN 0x00010000 119 120/* Number of idedma table needed */ 121#define NIDEDMA_TABLES (MAXPHYS/PAGE_SIZE + 1) 122 123/* Intel SCH */ 124#define SCH_D0TIM 0x80 125#define SCH_D1TIM 0x84 126#define SCH_TIM_UDMA 0x70000 127#define SCH_TIM_MDMA 0x00300 128#define SCH_TIM_PIO 0x00007 129#define SCH_TIM_SYNCDMA (1U << 31) 130 131#define SCH_TIM_MASK (SCH_TIM_UDMA | SCH_TIM_MDMA | SCH_TIM_PIO) 132 133#endif /* !_DEV_PCI_PCIIDEREG_H_ */ 134