pciide_pdc202xx_reg.h revision 1.3 
1/*	$OpenBSD: pciide_pdc202xx_reg.h,v 1.3 2001/03/16 09:16:06 chris Exp $	*/
2/*	$NetBSD: pciide_pdc202xx_reg.h,v 1.1 1999/08/29 17:20:10 bouyer Exp $ */
3
4/*
5 * Copyright (c) 1999 Manuel Bouyer.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 *    notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 *    notice, this list of conditions and the following disclaimer in the
14 *    documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 *    must display the following acknowledgement:
17 *	This product includes software developed by the University of
18 *	California, Berkeley and its contributors.
19 * 4. Neither the name of the University nor the names of its contributors
20 *    may be used to endorse or promote products derived from this software
21 *    without specific prior written permission.
22 *
23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * SUCH DAMAGE.
34 *
35 */
36
37/*
38 * Registers definitions for PROMISE PDC20246/PDC20262 PCI IDE controller.
39 * Unfortunably the HW docs are not publically available. I've been able
40 * to get a partial one for the PDC20246, and a better one for the PDC20262
41 * from Promise.
42 */
43
44#define PDC2xx_STATE		0x50
45#define PDC2xx_STATE_IDERAID		0x0001
46#define PDC2xx_STATE_NATIVE		0x0080
47/* controller initial state values(PDC20246 only) */
48#define PDC246_STATE_SHIPID		0x8000
49#define PDC246_STATE_IOCHRDY		0x0400
50#define PDC246_STATE_LBA(channel)	(0x0100 << (channel))
51#define PDC246_STATE_ISAIRQ		0x0008
52#define PDC246_STATE_EN(channel)	(0x0002 << (channel))
53/* controller initial state values(PDC20262 only) */
54#define PDC262_STATE_EN(chan)		(0x1000 << (chan))
55#define PDC262_STATE_80P(chan)		(0x0400 << (chan))
56
57/* per-drive timings */
58#define PDC2xx_TIM(channel, drive) (0x60 + 4 * (drive) + 8 * (channel))
59#define PDC2xx_TIM_SET_PA(r, x)	(((r) & 0xfffffff0) | ((x) & 0xf))
60#define PDC2xx_TIM_SET_PB(r, x)	(((r) & 0xffffe0ff) | (((x) & 0x1f) << 8))
61#define PDC2xx_TIM_SET_MB(r, x)	(((r) & 0xffff1fff) | (((x) & 0x7) << 13))
62#define PDC2xx_TIM_SET_MC(r, x)	(((r) & 0xfff0ffff) | (((x) & 0xf) << 16))
63#define PDC2xx_TIM_PRE		0x00000010
64#define PDC2xx_TIM_IORDY	0x00000020
65#define PDC2xx_TIM_ERRDY	0x00000040
66#define PDC2xx_TIM_SYNC		0x00000080
67#define PDC2xx_TIM_DMAW		0x00100000
68#define PDC2xx_TIM_DMAR		0x00200000
69#define PDC2xx_TIM_IORDYp	0x00400000
70#define PDC2xx_TIM_DMARQp	0x00800000
71
72/* The following are extentions of the DMA registers */
73
74/* Ultra-DMA mode 3/4 control (PDC20262 only, 1 byte) */
75#define PDC262_U66	0x11
76#define PDC262_U66_EN(chan) (0x2 << ((chan) *2))
77/* primary mode (1 byte) */
78#define PDC2xx_PM	0x1a
79/* secondary mode (1 byte) */
80#define PDC2xx_SM	0x1b
81/* System control register (4 bytes) */
82#define PDC2xx_SCR	0x1c
83#define PDC2xx_SCR_SET_GEN(r,x) (((r) & 0xffffff00) | ((x) & 0xff))
84#define PDC2xx_SCR_EMPTY(channel) (0x00000100 << (4 * channel))
85#define PDC2xx_SCR_FULL(channel) (0x00000200 << (4 * channel))
86#define PDC2xx_SCR_INT(channel) (0x00000400 << (4 * channel))
87#define PDC2xx_SCR_ERR(channel) (0x00000800 << (4 * channel))
88#define PDC2xx_SCR_SET_I2C(r,x) (((r) & 0xfff0ffff) | (((x) & 0xf) << 16))
89#define PDC2xx_SCR_SET_POLL(r,x) (((r) & 0xff0fffff) | (((x) & 0xf) << 20))
90#define PDC2xx_SCR_DMA		0x01000000
91#define PDC2xx_SCR_IORDY	0x02000000
92#define PDC2xx_SCR_G2FD		0x04000000
93#define PDC2xx_SCR_FLOAT	0x08000000
94#define PDC2xx_SCR_RSET		0x10000000
95#define PDC2xx_SCR_TST		0x20000000
96/* Values for "General Purpose Register" (PDC20262 only) */
97#define PDC262_SCR_GEN_LAT	0x20
98
99/* ATAPI port ((PDC20262 only) (4 bytes) */
100#define PDC262_ATAPI(chan) (0x20 + (4 * (chan)))
101#define PDC262_ATAPI_WC_MASK	0x00000fff
102#define PDC262_ATAPI_DMA_READ	0x00001000
103#define PDC262_ATAPI_DMA_WRITE	0x00002000
104#define PDC262_ATAPI_UDMA	0x00004000
105
106/*
107 * The timings provided here cmoes from the PDC20262 docs. I hope they are
108 * rigth for the PDC20246 too ...
109 */
110
111static int8_t pdc2xx_pa[] = {0x9, 0x5, 0x3, 0x2, 0x1};
112static int8_t pdc2xx_pb[] = {0x13, 0xc, 0x8, 0x6, 0x4};
113static int8_t pdc2xx_dma_mb[] = {0x3, 0x3, 0x3};
114static int8_t pdc2xx_dma_mc[] = {0x5, 0x4, 0x3};
115static int8_t pdc2xx_udma_mb[] = {0x3, 0x2, 0x1, 0x2, 0x1, 0x1};
116static int8_t pdc2xx_udma_mc[] = {0x3, 0x2, 0x1, 0x2, 0x1, 0x1};
117