1// SPDX-License-Identifier: MIT 2/* 3 * Copyright �� 2019 Intel Corporation 4 */ 5 6#include <drm/drm_atomic_state_helper.h> 7 8#include "i915_drv.h" 9#include "i915_reg.h" 10#include "i915_utils.h" 11#include "intel_atomic.h" 12#include "intel_bw.h" 13#include "intel_cdclk.h" 14#include "intel_display_core.h" 15#include "intel_display_types.h" 16#include "skl_watermark.h" 17#include "intel_mchbar_regs.h" 18#include "intel_pcode.h" 19 20/* Parameters for Qclk Geyserville (QGV) */ 21struct intel_qgv_point { 22 u16 dclk, t_rp, t_rdpre, t_rc, t_ras, t_rcd; 23}; 24 25struct intel_psf_gv_point { 26 u8 clk; /* clock in multiples of 16.6666 MHz */ 27}; 28 29struct intel_qgv_info { 30 struct intel_qgv_point points[I915_NUM_QGV_POINTS]; 31 struct intel_psf_gv_point psf_points[I915_NUM_PSF_GV_POINTS]; 32 u8 num_points; 33 u8 num_psf_points; 34 u8 t_bl; 35 u8 max_numchannels; 36 u8 channel_width; 37 u8 deinterleave; 38}; 39 40static int dg1_mchbar_read_qgv_point_info(struct drm_i915_private *dev_priv, 41 struct intel_qgv_point *sp, 42 int point) 43{ 44 u32 dclk_ratio, dclk_reference; 45 u32 val; 46 47 val = intel_uncore_read(&dev_priv->uncore, SA_PERF_STATUS_0_0_0_MCHBAR_PC); 48 dclk_ratio = REG_FIELD_GET(DG1_QCLK_RATIO_MASK, val); 49 if (val & DG1_QCLK_REFERENCE) 50 dclk_reference = 6; /* 6 * 16.666 MHz = 100 MHz */ 51 else 52 dclk_reference = 8; /* 8 * 16.666 MHz = 133 MHz */ 53 sp->dclk = DIV_ROUND_UP((16667 * dclk_ratio * dclk_reference) + 500, 1000); 54 55 val = intel_uncore_read(&dev_priv->uncore, SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU); 56 if (val & DG1_GEAR_TYPE) 57 sp->dclk *= 2; 58 59 if (sp->dclk == 0) 60 return -EINVAL; 61 62 val = intel_uncore_read(&dev_priv->uncore, MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR); 63 sp->t_rp = REG_FIELD_GET(DG1_DRAM_T_RP_MASK, val); 64 sp->t_rdpre = REG_FIELD_GET(DG1_DRAM_T_RDPRE_MASK, val); 65 66 val = intel_uncore_read(&dev_priv->uncore, MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR_HIGH); 67 sp->t_rcd = REG_FIELD_GET(DG1_DRAM_T_RCD_MASK, val); 68 sp->t_ras = REG_FIELD_GET(DG1_DRAM_T_RAS_MASK, val); 69 70 sp->t_rc = sp->t_rp + sp->t_ras; 71 72 return 0; 73} 74 75static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv, 76 struct intel_qgv_point *sp, 77 int point) 78{ 79 u32 val = 0, val2 = 0; 80 u16 dclk; 81 int ret; 82 83 ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO | 84 ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point), 85 &val, &val2); 86 if (ret) 87 return ret; 88 89 dclk = val & 0xffff; 90 sp->dclk = DIV_ROUND_UP((16667 * dclk) + (DISPLAY_VER(dev_priv) > 11 ? 500 : 0), 1000); 91 sp->t_rp = (val & 0xff0000) >> 16; 92 sp->t_rcd = (val & 0xff000000) >> 24; 93 94 sp->t_rdpre = val2 & 0xff; 95 sp->t_ras = (val2 & 0xff00) >> 8; 96 97 sp->t_rc = sp->t_rp + sp->t_ras; 98 99 return 0; 100} 101 102static int adls_pcode_read_psf_gv_point_info(struct drm_i915_private *dev_priv, 103 struct intel_psf_gv_point *points) 104{ 105 u32 val = 0; 106 int ret; 107 int i; 108 109 ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO | 110 ADL_PCODE_MEM_SS_READ_PSF_GV_INFO, &val, NULL); 111 if (ret) 112 return ret; 113 114 for (i = 0; i < I915_NUM_PSF_GV_POINTS; i++) { 115 points[i].clk = val & 0xff; 116 val >>= 8; 117 } 118 119 return 0; 120} 121 122static u16 icl_qgv_points_mask(struct drm_i915_private *i915) 123{ 124 unsigned int num_psf_gv_points = i915->display.bw.max[0].num_psf_gv_points; 125 unsigned int num_qgv_points = i915->display.bw.max[0].num_qgv_points; 126 u16 qgv_points = 0, psf_points = 0; 127 128 /* 129 * We can _not_ use the whole ADLS_QGV_PT_MASK here, as PCode rejects 130 * it with failure if we try masking any unadvertised points. 131 * So need to operate only with those returned from PCode. 132 */ 133 if (num_qgv_points > 0) 134 qgv_points = GENMASK(num_qgv_points - 1, 0); 135 136 if (num_psf_gv_points > 0) 137 psf_points = GENMASK(num_psf_gv_points - 1, 0); 138 139 return ICL_PCODE_REQ_QGV_PT(qgv_points) | ADLS_PCODE_REQ_PSF_PT(psf_points); 140} 141 142static bool is_sagv_enabled(struct drm_i915_private *i915, u16 points_mask) 143{ 144 return !is_power_of_2(~points_mask & icl_qgv_points_mask(i915) & 145 ICL_PCODE_REQ_QGV_PT_MASK); 146} 147 148int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv, 149 u32 points_mask) 150{ 151 int ret; 152 153 if (DISPLAY_VER(dev_priv) >= 14) 154 return 0; 155 156 /* bspec says to keep retrying for at least 1 ms */ 157 ret = skl_pcode_request(&dev_priv->uncore, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG, 158 points_mask, 159 ICL_PCODE_REP_QGV_MASK | ADLS_PCODE_REP_PSF_MASK, 160 ICL_PCODE_REP_QGV_SAFE | ADLS_PCODE_REP_PSF_SAFE, 161 1); 162 163 if (ret < 0) { 164 drm_err(&dev_priv->drm, "Failed to disable qgv points (%d) points: 0x%x\n", ret, points_mask); 165 return ret; 166 } 167 168 dev_priv->display.sagv.status = is_sagv_enabled(dev_priv, points_mask) ? 169 I915_SAGV_ENABLED : I915_SAGV_DISABLED; 170 171 return 0; 172} 173 174static int mtl_read_qgv_point_info(struct drm_i915_private *dev_priv, 175 struct intel_qgv_point *sp, int point) 176{ 177 u32 val, val2; 178 u16 dclk; 179 180 val = intel_uncore_read(&dev_priv->uncore, 181 MTL_MEM_SS_INFO_QGV_POINT_LOW(point)); 182 val2 = intel_uncore_read(&dev_priv->uncore, 183 MTL_MEM_SS_INFO_QGV_POINT_HIGH(point)); 184 dclk = REG_FIELD_GET(MTL_DCLK_MASK, val); 185 sp->dclk = DIV_ROUND_CLOSEST(16667 * dclk, 1000); 186 sp->t_rp = REG_FIELD_GET(MTL_TRP_MASK, val); 187 sp->t_rcd = REG_FIELD_GET(MTL_TRCD_MASK, val); 188 189 sp->t_rdpre = REG_FIELD_GET(MTL_TRDPRE_MASK, val2); 190 sp->t_ras = REG_FIELD_GET(MTL_TRAS_MASK, val2); 191 192 sp->t_rc = sp->t_rp + sp->t_ras; 193 194 return 0; 195} 196 197static int 198intel_read_qgv_point_info(struct drm_i915_private *dev_priv, 199 struct intel_qgv_point *sp, 200 int point) 201{ 202 if (DISPLAY_VER(dev_priv) >= 14) 203 return mtl_read_qgv_point_info(dev_priv, sp, point); 204 else if (IS_DG1(dev_priv)) 205 return dg1_mchbar_read_qgv_point_info(dev_priv, sp, point); 206 else 207 return icl_pcode_read_qgv_point_info(dev_priv, sp, point); 208} 209 210static int icl_get_qgv_points(struct drm_i915_private *dev_priv, 211 struct intel_qgv_info *qi, 212 bool is_y_tile) 213{ 214 const struct dram_info *dram_info = &dev_priv->dram_info; 215 int i, ret; 216 217 qi->num_points = dram_info->num_qgv_points; 218 qi->num_psf_points = dram_info->num_psf_gv_points; 219 220 if (DISPLAY_VER(dev_priv) >= 14) { 221 switch (dram_info->type) { 222 case INTEL_DRAM_DDR4: 223 qi->t_bl = 4; 224 qi->max_numchannels = 2; 225 qi->channel_width = 64; 226 qi->deinterleave = 2; 227 break; 228 case INTEL_DRAM_DDR5: 229 qi->t_bl = 8; 230 qi->max_numchannels = 4; 231 qi->channel_width = 32; 232 qi->deinterleave = 2; 233 break; 234 case INTEL_DRAM_LPDDR4: 235 case INTEL_DRAM_LPDDR5: 236 qi->t_bl = 16; 237 qi->max_numchannels = 8; 238 qi->channel_width = 16; 239 qi->deinterleave = 4; 240 break; 241 default: 242 MISSING_CASE(dram_info->type); 243 return -EINVAL; 244 } 245 } else if (DISPLAY_VER(dev_priv) >= 12) { 246 switch (dram_info->type) { 247 case INTEL_DRAM_DDR4: 248 qi->t_bl = is_y_tile ? 8 : 4; 249 qi->max_numchannels = 2; 250 qi->channel_width = 64; 251 qi->deinterleave = is_y_tile ? 1 : 2; 252 break; 253 case INTEL_DRAM_DDR5: 254 qi->t_bl = is_y_tile ? 16 : 8; 255 qi->max_numchannels = 4; 256 qi->channel_width = 32; 257 qi->deinterleave = is_y_tile ? 1 : 2; 258 break; 259 case INTEL_DRAM_LPDDR4: 260 if (IS_ROCKETLAKE(dev_priv)) { 261 qi->t_bl = 8; 262 qi->max_numchannels = 4; 263 qi->channel_width = 32; 264 qi->deinterleave = 2; 265 break; 266 } 267 fallthrough; 268 case INTEL_DRAM_LPDDR5: 269 qi->t_bl = 16; 270 qi->max_numchannels = 8; 271 qi->channel_width = 16; 272 qi->deinterleave = is_y_tile ? 2 : 4; 273 break; 274 default: 275 qi->t_bl = 16; 276 qi->max_numchannels = 1; 277 break; 278 } 279 } else if (DISPLAY_VER(dev_priv) == 11) { 280 qi->t_bl = dev_priv->dram_info.type == INTEL_DRAM_DDR4 ? 4 : 8; 281 qi->max_numchannels = 1; 282 } 283 284 if (drm_WARN_ON(&dev_priv->drm, 285 qi->num_points > ARRAY_SIZE(qi->points))) 286 qi->num_points = ARRAY_SIZE(qi->points); 287 288 for (i = 0; i < qi->num_points; i++) { 289 struct intel_qgv_point *sp = &qi->points[i]; 290 291 ret = intel_read_qgv_point_info(dev_priv, sp, i); 292 if (ret) 293 return ret; 294 295 drm_dbg_kms(&dev_priv->drm, 296 "QGV %d: DCLK=%d tRP=%d tRDPRE=%d tRAS=%d tRCD=%d tRC=%d\n", 297 i, sp->dclk, sp->t_rp, sp->t_rdpre, sp->t_ras, 298 sp->t_rcd, sp->t_rc); 299 } 300 301 if (qi->num_psf_points > 0) { 302 ret = adls_pcode_read_psf_gv_point_info(dev_priv, qi->psf_points); 303 if (ret) { 304 drm_err(&dev_priv->drm, "Failed to read PSF point data; PSF points will not be considered in bandwidth calculations.\n"); 305 qi->num_psf_points = 0; 306 } 307 308 for (i = 0; i < qi->num_psf_points; i++) 309 drm_dbg_kms(&dev_priv->drm, 310 "PSF GV %d: CLK=%d \n", 311 i, qi->psf_points[i].clk); 312 } 313 314 return 0; 315} 316 317static int adl_calc_psf_bw(int clk) 318{ 319 /* 320 * clk is multiples of 16.666MHz (100/6) 321 * According to BSpec PSF GV bandwidth is 322 * calculated as BW = 64 * clk * 16.666Mhz 323 */ 324 return DIV_ROUND_CLOSEST(64 * clk * 100, 6); 325} 326 327static int icl_sagv_max_dclk(const struct intel_qgv_info *qi) 328{ 329 u16 dclk = 0; 330 int i; 331 332 for (i = 0; i < qi->num_points; i++) 333 dclk = max(dclk, qi->points[i].dclk); 334 335 return dclk; 336} 337 338struct intel_sa_info { 339 u16 displayrtids; 340 u8 deburst, deprogbwlimit, derating; 341}; 342 343static const struct intel_sa_info icl_sa_info = { 344 .deburst = 8, 345 .deprogbwlimit = 25, /* GB/s */ 346 .displayrtids = 128, 347 .derating = 10, 348}; 349 350static const struct intel_sa_info tgl_sa_info = { 351 .deburst = 16, 352 .deprogbwlimit = 34, /* GB/s */ 353 .displayrtids = 256, 354 .derating = 10, 355}; 356 357static const struct intel_sa_info rkl_sa_info = { 358 .deburst = 8, 359 .deprogbwlimit = 20, /* GB/s */ 360 .displayrtids = 128, 361 .derating = 10, 362}; 363 364static const struct intel_sa_info adls_sa_info = { 365 .deburst = 16, 366 .deprogbwlimit = 38, /* GB/s */ 367 .displayrtids = 256, 368 .derating = 10, 369}; 370 371static const struct intel_sa_info adlp_sa_info = { 372 .deburst = 16, 373 .deprogbwlimit = 38, /* GB/s */ 374 .displayrtids = 256, 375 .derating = 20, 376}; 377 378static const struct intel_sa_info mtl_sa_info = { 379 .deburst = 32, 380 .deprogbwlimit = 38, /* GB/s */ 381 .displayrtids = 256, 382 .derating = 10, 383}; 384 385static int icl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel_sa_info *sa) 386{ 387 struct intel_qgv_info qi = {}; 388 bool is_y_tile = true; /* assume y tile may be used */ 389 int num_channels = max_t(u8, 1, dev_priv->dram_info.num_channels); 390 int ipqdepth, ipqdepthpch = 16; 391 int dclk_max; 392 int maxdebw; 393 int num_groups = ARRAY_SIZE(dev_priv->display.bw.max); 394 int i, ret; 395 396 ret = icl_get_qgv_points(dev_priv, &qi, is_y_tile); 397 if (ret) { 398 drm_dbg_kms(&dev_priv->drm, 399 "Failed to get memory subsystem information, ignoring bandwidth limits"); 400 return ret; 401 } 402 403 dclk_max = icl_sagv_max_dclk(&qi); 404 maxdebw = min(sa->deprogbwlimit * 1000, dclk_max * 16 * 6 / 10); 405 ipqdepth = min(ipqdepthpch, sa->displayrtids / num_channels); 406 qi.deinterleave = DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2); 407 408 for (i = 0; i < num_groups; i++) { 409 struct intel_bw_info *bi = &dev_priv->display.bw.max[i]; 410 int clpchgroup; 411 int j; 412 413 clpchgroup = (sa->deburst * qi.deinterleave / num_channels) << i; 414 bi->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1; 415 416 bi->num_qgv_points = qi.num_points; 417 bi->num_psf_gv_points = qi.num_psf_points; 418 419 for (j = 0; j < qi.num_points; j++) { 420 const struct intel_qgv_point *sp = &qi.points[j]; 421 int ct, bw; 422 423 /* 424 * Max row cycle time 425 * 426 * FIXME what is the logic behind the 427 * assumed burst length? 428 */ 429 ct = max_t(int, sp->t_rc, sp->t_rp + sp->t_rcd + 430 (clpchgroup - 1) * qi.t_bl + sp->t_rdpre); 431 bw = DIV_ROUND_UP(sp->dclk * clpchgroup * 32 * num_channels, ct); 432 433 bi->deratedbw[j] = min(maxdebw, 434 bw * (100 - sa->derating) / 100); 435 436 drm_dbg_kms(&dev_priv->drm, 437 "BW%d / QGV %d: num_planes=%d deratedbw=%u\n", 438 i, j, bi->num_planes, bi->deratedbw[j]); 439 } 440 } 441 /* 442 * In case if SAGV is disabled in BIOS, we always get 1 443 * SAGV point, but we can't send PCode commands to restrict it 444 * as it will fail and pointless anyway. 445 */ 446 if (qi.num_points == 1) 447 dev_priv->display.sagv.status = I915_SAGV_NOT_CONTROLLED; 448 else 449 dev_priv->display.sagv.status = I915_SAGV_ENABLED; 450 451 return 0; 452} 453 454static int tgl_get_bw_info(struct drm_i915_private *dev_priv, const struct intel_sa_info *sa) 455{ 456 struct intel_qgv_info qi = {}; 457 const struct dram_info *dram_info = &dev_priv->dram_info; 458 bool is_y_tile = true; /* assume y tile may be used */ 459 int num_channels = max_t(u8, 1, dev_priv->dram_info.num_channels); 460 int ipqdepth, ipqdepthpch = 16; 461 int dclk_max; 462 int maxdebw, peakbw; 463 int clperchgroup; 464 int num_groups = ARRAY_SIZE(dev_priv->display.bw.max); 465 int i, ret; 466 467 ret = icl_get_qgv_points(dev_priv, &qi, is_y_tile); 468 if (ret) { 469 drm_dbg_kms(&dev_priv->drm, 470 "Failed to get memory subsystem information, ignoring bandwidth limits"); 471 return ret; 472 } 473 474 if (DISPLAY_VER(dev_priv) < 14 && 475 (dram_info->type == INTEL_DRAM_LPDDR4 || dram_info->type == INTEL_DRAM_LPDDR5)) 476 num_channels *= 2; 477 478 qi.deinterleave = qi.deinterleave ? : DIV_ROUND_UP(num_channels, is_y_tile ? 4 : 2); 479 480 if (num_channels < qi.max_numchannels && DISPLAY_VER(dev_priv) >= 12) 481 qi.deinterleave = max(DIV_ROUND_UP(qi.deinterleave, 2), 1); 482 483 if (DISPLAY_VER(dev_priv) > 11 && num_channels > qi.max_numchannels) 484 drm_warn(&dev_priv->drm, "Number of channels exceeds max number of channels."); 485 if (qi.max_numchannels != 0) 486 num_channels = min_t(u8, num_channels, qi.max_numchannels); 487 488 dclk_max = icl_sagv_max_dclk(&qi); 489 490 peakbw = num_channels * DIV_ROUND_UP(qi.channel_width, 8) * dclk_max; 491 maxdebw = min(sa->deprogbwlimit * 1000, peakbw * 6 / 10); /* 60% */ 492 493 ipqdepth = min(ipqdepthpch, sa->displayrtids / num_channels); 494 /* 495 * clperchgroup = 4kpagespermempage * clperchperblock, 496 * clperchperblock = 8 / num_channels * interleave 497 */ 498 clperchgroup = 4 * DIV_ROUND_UP(8, num_channels) * qi.deinterleave; 499 500 for (i = 0; i < num_groups; i++) { 501 struct intel_bw_info *bi = &dev_priv->display.bw.max[i]; 502 struct intel_bw_info *bi_next; 503 int clpchgroup; 504 int j; 505 506 clpchgroup = (sa->deburst * qi.deinterleave / num_channels) << i; 507 508 if (i < num_groups - 1) { 509 bi_next = &dev_priv->display.bw.max[i + 1]; 510 511 if (clpchgroup < clperchgroup) 512 bi_next->num_planes = (ipqdepth - clpchgroup) / 513 clpchgroup + 1; 514 else 515 bi_next->num_planes = 0; 516 } 517 518 bi->num_qgv_points = qi.num_points; 519 bi->num_psf_gv_points = qi.num_psf_points; 520 521 for (j = 0; j < qi.num_points; j++) { 522 const struct intel_qgv_point *sp = &qi.points[j]; 523 int ct, bw; 524 525 /* 526 * Max row cycle time 527 * 528 * FIXME what is the logic behind the 529 * assumed burst length? 530 */ 531 ct = max_t(int, sp->t_rc, sp->t_rp + sp->t_rcd + 532 (clpchgroup - 1) * qi.t_bl + sp->t_rdpre); 533 bw = DIV_ROUND_UP(sp->dclk * clpchgroup * 32 * num_channels, ct); 534 535 bi->deratedbw[j] = min(maxdebw, 536 bw * (100 - sa->derating) / 100); 537 bi->peakbw[j] = DIV_ROUND_CLOSEST(sp->dclk * 538 num_channels * 539 qi.channel_width, 8); 540 541 drm_dbg_kms(&dev_priv->drm, 542 "BW%d / QGV %d: num_planes=%d deratedbw=%u peakbw: %u\n", 543 i, j, bi->num_planes, bi->deratedbw[j], 544 bi->peakbw[j]); 545 } 546 547 for (j = 0; j < qi.num_psf_points; j++) { 548 const struct intel_psf_gv_point *sp = &qi.psf_points[j]; 549 550 bi->psf_bw[j] = adl_calc_psf_bw(sp->clk); 551 552 drm_dbg_kms(&dev_priv->drm, 553 "BW%d / PSF GV %d: num_planes=%d bw=%u\n", 554 i, j, bi->num_planes, bi->psf_bw[j]); 555 } 556 } 557 558 /* 559 * In case if SAGV is disabled in BIOS, we always get 1 560 * SAGV point, but we can't send PCode commands to restrict it 561 * as it will fail and pointless anyway. 562 */ 563 if (qi.num_points == 1) 564 dev_priv->display.sagv.status = I915_SAGV_NOT_CONTROLLED; 565 else 566 dev_priv->display.sagv.status = I915_SAGV_ENABLED; 567 568 return 0; 569} 570 571static void dg2_get_bw_info(struct drm_i915_private *i915) 572{ 573 unsigned int deratedbw = IS_DG2_G11(i915) ? 38000 : 50000; 574 int num_groups = ARRAY_SIZE(i915->display.bw.max); 575 int i; 576 577 /* 578 * DG2 doesn't have SAGV or QGV points, just a constant max bandwidth 579 * that doesn't depend on the number of planes enabled. So fill all the 580 * plane group with constant bw information for uniformity with other 581 * platforms. DG2-G10 platforms have a constant 50 GB/s bandwidth, 582 * whereas DG2-G11 platforms have 38 GB/s. 583 */ 584 for (i = 0; i < num_groups; i++) { 585 struct intel_bw_info *bi = &i915->display.bw.max[i]; 586 587 bi->num_planes = 1; 588 /* Need only one dummy QGV point per group */ 589 bi->num_qgv_points = 1; 590 bi->deratedbw[0] = deratedbw; 591 } 592 593 i915->display.sagv.status = I915_SAGV_NOT_CONTROLLED; 594} 595 596static unsigned int icl_max_bw_index(struct drm_i915_private *dev_priv, 597 int num_planes, int qgv_point) 598{ 599 int i; 600 601 /* 602 * Let's return max bw for 0 planes 603 */ 604 num_planes = max(1, num_planes); 605 606 for (i = 0; i < ARRAY_SIZE(dev_priv->display.bw.max); i++) { 607 const struct intel_bw_info *bi = 608 &dev_priv->display.bw.max[i]; 609 610 /* 611 * Pcode will not expose all QGV points when 612 * SAGV is forced to off/min/med/max. 613 */ 614 if (qgv_point >= bi->num_qgv_points) 615 return UINT_MAX; 616 617 if (num_planes >= bi->num_planes) 618 return i; 619 } 620 621 return UINT_MAX; 622} 623 624static unsigned int tgl_max_bw_index(struct drm_i915_private *dev_priv, 625 int num_planes, int qgv_point) 626{ 627 int i; 628 629 /* 630 * Let's return max bw for 0 planes 631 */ 632 num_planes = max(1, num_planes); 633 634 for (i = ARRAY_SIZE(dev_priv->display.bw.max) - 1; i >= 0; i--) { 635 const struct intel_bw_info *bi = 636 &dev_priv->display.bw.max[i]; 637 638 /* 639 * Pcode will not expose all QGV points when 640 * SAGV is forced to off/min/med/max. 641 */ 642 if (qgv_point >= bi->num_qgv_points) 643 return UINT_MAX; 644 645 if (num_planes <= bi->num_planes) 646 return i; 647 } 648 649 return 0; 650} 651 652static unsigned int adl_psf_bw(struct drm_i915_private *dev_priv, 653 int psf_gv_point) 654{ 655 const struct intel_bw_info *bi = 656 &dev_priv->display.bw.max[0]; 657 658 return bi->psf_bw[psf_gv_point]; 659} 660 661void intel_bw_init_hw(struct drm_i915_private *dev_priv) 662{ 663 if (!HAS_DISPLAY(dev_priv)) 664 return; 665 666 if (DISPLAY_VER(dev_priv) >= 14) 667 tgl_get_bw_info(dev_priv, &mtl_sa_info); 668 else if (IS_DG2(dev_priv)) 669 dg2_get_bw_info(dev_priv); 670 else if (IS_ALDERLAKE_P(dev_priv)) 671 tgl_get_bw_info(dev_priv, &adlp_sa_info); 672 else if (IS_ALDERLAKE_S(dev_priv)) 673 tgl_get_bw_info(dev_priv, &adls_sa_info); 674 else if (IS_ROCKETLAKE(dev_priv)) 675 tgl_get_bw_info(dev_priv, &rkl_sa_info); 676 else if (DISPLAY_VER(dev_priv) == 12) 677 tgl_get_bw_info(dev_priv, &tgl_sa_info); 678 else if (DISPLAY_VER(dev_priv) == 11) 679 icl_get_bw_info(dev_priv, &icl_sa_info); 680} 681 682static unsigned int intel_bw_crtc_num_active_planes(const struct intel_crtc_state *crtc_state) 683{ 684 /* 685 * We assume cursors are small enough 686 * to not not cause bandwidth problems. 687 */ 688 return hweight8(crtc_state->active_planes & ~BIT(PLANE_CURSOR)); 689} 690 691static unsigned int intel_bw_crtc_data_rate(const struct intel_crtc_state *crtc_state) 692{ 693 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 694 struct drm_i915_private *i915 = to_i915(crtc->base.dev); 695 unsigned int data_rate = 0; 696 enum plane_id plane_id; 697 698 for_each_plane_id_on_crtc(crtc, plane_id) { 699 /* 700 * We assume cursors are small enough 701 * to not not cause bandwidth problems. 702 */ 703 if (plane_id == PLANE_CURSOR) 704 continue; 705 706 data_rate += crtc_state->data_rate[plane_id]; 707 708 if (DISPLAY_VER(i915) < 11) 709 data_rate += crtc_state->data_rate_y[plane_id]; 710 } 711 712 return data_rate; 713} 714 715/* "Maximum Pipe Read Bandwidth" */ 716static int intel_bw_crtc_min_cdclk(const struct intel_crtc_state *crtc_state) 717{ 718 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 719 struct drm_i915_private *i915 = to_i915(crtc->base.dev); 720 721 if (DISPLAY_VER(i915) < 12) 722 return 0; 723 724 return DIV_ROUND_UP_ULL(mul_u32_u32(intel_bw_crtc_data_rate(crtc_state), 10), 512); 725} 726 727void intel_bw_crtc_update(struct intel_bw_state *bw_state, 728 const struct intel_crtc_state *crtc_state) 729{ 730 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 731 struct drm_i915_private *i915 = to_i915(crtc->base.dev); 732 733 bw_state->data_rate[crtc->pipe] = 734 intel_bw_crtc_data_rate(crtc_state); 735 bw_state->num_active_planes[crtc->pipe] = 736 intel_bw_crtc_num_active_planes(crtc_state); 737 738 drm_dbg_kms(&i915->drm, "pipe %c data rate %u num active planes %u\n", 739 pipe_name(crtc->pipe), 740 bw_state->data_rate[crtc->pipe], 741 bw_state->num_active_planes[crtc->pipe]); 742} 743 744static unsigned int intel_bw_num_active_planes(struct drm_i915_private *dev_priv, 745 const struct intel_bw_state *bw_state) 746{ 747 unsigned int num_active_planes = 0; 748 enum pipe pipe; 749 750 for_each_pipe(dev_priv, pipe) 751 num_active_planes += bw_state->num_active_planes[pipe]; 752 753 return num_active_planes; 754} 755 756static unsigned int intel_bw_data_rate(struct drm_i915_private *dev_priv, 757 const struct intel_bw_state *bw_state) 758{ 759 unsigned int data_rate = 0; 760 enum pipe pipe; 761 762 for_each_pipe(dev_priv, pipe) 763 data_rate += bw_state->data_rate[pipe]; 764 765 if (DISPLAY_VER(dev_priv) >= 13 && i915_vtd_active(dev_priv)) 766 data_rate = DIV_ROUND_UP(data_rate * 105, 100); 767 768 return data_rate; 769} 770 771struct intel_bw_state * 772intel_atomic_get_old_bw_state(struct intel_atomic_state *state) 773{ 774 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 775 struct intel_global_state *bw_state; 776 777 bw_state = intel_atomic_get_old_global_obj_state(state, &dev_priv->display.bw.obj); 778 779 return to_intel_bw_state(bw_state); 780} 781 782struct intel_bw_state * 783intel_atomic_get_new_bw_state(struct intel_atomic_state *state) 784{ 785 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 786 struct intel_global_state *bw_state; 787 788 bw_state = intel_atomic_get_new_global_obj_state(state, &dev_priv->display.bw.obj); 789 790 return to_intel_bw_state(bw_state); 791} 792 793struct intel_bw_state * 794intel_atomic_get_bw_state(struct intel_atomic_state *state) 795{ 796 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 797 struct intel_global_state *bw_state; 798 799 bw_state = intel_atomic_get_global_obj_state(state, &dev_priv->display.bw.obj); 800 if (IS_ERR(bw_state)) 801 return ERR_CAST(bw_state); 802 803 return to_intel_bw_state(bw_state); 804} 805 806static int mtl_find_qgv_points(struct drm_i915_private *i915, 807 unsigned int data_rate, 808 unsigned int num_active_planes, 809 struct intel_bw_state *new_bw_state) 810{ 811 unsigned int best_rate = UINT_MAX; 812 unsigned int num_qgv_points = i915->display.bw.max[0].num_qgv_points; 813 unsigned int qgv_peak_bw = 0; 814 int i; 815 int ret; 816 817 ret = intel_atomic_lock_global_state(&new_bw_state->base); 818 if (ret) 819 return ret; 820 821 /* 822 * If SAGV cannot be enabled, disable the pcode SAGV by passing all 1's 823 * for qgv peak bw in PM Demand request. So assign UINT_MAX if SAGV is 824 * not enabled. PM Demand code will clamp the value for the register 825 */ 826 if (!intel_can_enable_sagv(i915, new_bw_state)) { 827 new_bw_state->qgv_point_peakbw = U16_MAX; 828 drm_dbg_kms(&i915->drm, "No SAGV, use UINT_MAX as peak bw."); 829 return 0; 830 } 831 832 /* 833 * Find the best QGV point by comparing the data_rate with max data rate 834 * offered per plane group 835 */ 836 for (i = 0; i < num_qgv_points; i++) { 837 unsigned int bw_index = 838 tgl_max_bw_index(i915, num_active_planes, i); 839 unsigned int max_data_rate; 840 841 if (bw_index >= ARRAY_SIZE(i915->display.bw.max)) 842 continue; 843 844 max_data_rate = i915->display.bw.max[bw_index].deratedbw[i]; 845 846 if (max_data_rate < data_rate) 847 continue; 848 849 if (max_data_rate - data_rate < best_rate) { 850 best_rate = max_data_rate - data_rate; 851 qgv_peak_bw = i915->display.bw.max[bw_index].peakbw[i]; 852 } 853 854 drm_dbg_kms(&i915->drm, "QGV point %d: max bw %d required %d qgv_peak_bw: %d\n", 855 i, max_data_rate, data_rate, qgv_peak_bw); 856 } 857 858 drm_dbg_kms(&i915->drm, "Matching peaks QGV bw: %d for required data rate: %d\n", 859 qgv_peak_bw, data_rate); 860 861 /* 862 * The display configuration cannot be supported if no QGV point 863 * satisfying the required data rate is found 864 */ 865 if (qgv_peak_bw == 0) { 866 drm_dbg_kms(&i915->drm, "No QGV points for bw %d for display configuration(%d active planes).\n", 867 data_rate, num_active_planes); 868 return -EINVAL; 869 } 870 871 /* MTL PM DEMAND expects QGV BW parameter in multiples of 100 mbps */ 872 new_bw_state->qgv_point_peakbw = DIV_ROUND_CLOSEST(qgv_peak_bw, 100); 873 874 return 0; 875} 876 877static int icl_find_qgv_points(struct drm_i915_private *i915, 878 unsigned int data_rate, 879 unsigned int num_active_planes, 880 const struct intel_bw_state *old_bw_state, 881 struct intel_bw_state *new_bw_state) 882{ 883 unsigned int max_bw_point = 0; 884 unsigned int max_bw = 0; 885 unsigned int num_psf_gv_points = i915->display.bw.max[0].num_psf_gv_points; 886 unsigned int num_qgv_points = i915->display.bw.max[0].num_qgv_points; 887 u16 psf_points = 0; 888 u16 qgv_points = 0; 889 int i; 890 int ret; 891 892 ret = intel_atomic_lock_global_state(&new_bw_state->base); 893 if (ret) 894 return ret; 895 896 for (i = 0; i < num_qgv_points; i++) { 897 unsigned int idx; 898 unsigned int max_data_rate; 899 900 if (DISPLAY_VER(i915) > 11) 901 idx = tgl_max_bw_index(i915, num_active_planes, i); 902 else 903 idx = icl_max_bw_index(i915, num_active_planes, i); 904 905 if (idx >= ARRAY_SIZE(i915->display.bw.max)) 906 continue; 907 908 max_data_rate = i915->display.bw.max[idx].deratedbw[i]; 909 910 /* 911 * We need to know which qgv point gives us 912 * maximum bandwidth in order to disable SAGV 913 * if we find that we exceed SAGV block time 914 * with watermarks. By that moment we already 915 * have those, as it is calculated earlier in 916 * intel_atomic_check, 917 */ 918 if (max_data_rate > max_bw) { 919 max_bw_point = i; 920 max_bw = max_data_rate; 921 } 922 if (max_data_rate >= data_rate) 923 qgv_points |= BIT(i); 924 925 drm_dbg_kms(&i915->drm, "QGV point %d: max bw %d required %d\n", 926 i, max_data_rate, data_rate); 927 } 928 929 for (i = 0; i < num_psf_gv_points; i++) { 930 unsigned int max_data_rate = adl_psf_bw(i915, i); 931 932 if (max_data_rate >= data_rate) 933 psf_points |= BIT(i); 934 935 drm_dbg_kms(&i915->drm, "PSF GV point %d: max bw %d" 936 " required %d\n", 937 i, max_data_rate, data_rate); 938 } 939 940 /* 941 * BSpec states that we always should have at least one allowed point 942 * left, so if we couldn't - simply reject the configuration for obvious 943 * reasons. 944 */ 945 if (qgv_points == 0) { 946 drm_dbg_kms(&i915->drm, "No QGV points provide sufficient memory" 947 " bandwidth %d for display configuration(%d active planes).\n", 948 data_rate, num_active_planes); 949 return -EINVAL; 950 } 951 952 if (num_psf_gv_points > 0 && psf_points == 0) { 953 drm_dbg_kms(&i915->drm, "No PSF GV points provide sufficient memory" 954 " bandwidth %d for display configuration(%d active planes).\n", 955 data_rate, num_active_planes); 956 return -EINVAL; 957 } 958 959 /* 960 * Leave only single point with highest bandwidth, if 961 * we can't enable SAGV due to the increased memory latency it may 962 * cause. 963 */ 964 if (!intel_can_enable_sagv(i915, new_bw_state)) { 965 qgv_points = BIT(max_bw_point); 966 drm_dbg_kms(&i915->drm, "No SAGV, using single QGV point %d\n", 967 max_bw_point); 968 } 969 970 /* 971 * We store the ones which need to be masked as that is what PCode 972 * actually accepts as a parameter. 973 */ 974 new_bw_state->qgv_points_mask = 975 ~(ICL_PCODE_REQ_QGV_PT(qgv_points) | 976 ADLS_PCODE_REQ_PSF_PT(psf_points)) & 977 icl_qgv_points_mask(i915); 978 979 /* 980 * If the actual mask had changed we need to make sure that 981 * the commits are serialized(in case this is a nomodeset, nonblocking) 982 */ 983 if (new_bw_state->qgv_points_mask != old_bw_state->qgv_points_mask) { 984 ret = intel_atomic_serialize_global_state(&new_bw_state->base); 985 if (ret) 986 return ret; 987 } 988 989 return 0; 990} 991 992static int intel_bw_check_qgv_points(struct drm_i915_private *i915, 993 const struct intel_bw_state *old_bw_state, 994 struct intel_bw_state *new_bw_state) 995{ 996 unsigned int data_rate = intel_bw_data_rate(i915, new_bw_state); 997 unsigned int num_active_planes = 998 intel_bw_num_active_planes(i915, new_bw_state); 999 1000 data_rate = DIV_ROUND_UP(data_rate, 1000); 1001 1002 if (DISPLAY_VER(i915) >= 14) 1003 return mtl_find_qgv_points(i915, data_rate, num_active_planes, 1004 new_bw_state); 1005 else 1006 return icl_find_qgv_points(i915, data_rate, num_active_planes, 1007 old_bw_state, new_bw_state); 1008} 1009 1010static bool intel_bw_state_changed(struct drm_i915_private *i915, 1011 const struct intel_bw_state *old_bw_state, 1012 const struct intel_bw_state *new_bw_state) 1013{ 1014 enum pipe pipe; 1015 1016 for_each_pipe(i915, pipe) { 1017 const struct intel_dbuf_bw *old_crtc_bw = 1018 &old_bw_state->dbuf_bw[pipe]; 1019 const struct intel_dbuf_bw *new_crtc_bw = 1020 &new_bw_state->dbuf_bw[pipe]; 1021 enum dbuf_slice slice; 1022 1023 for_each_dbuf_slice(i915, slice) { 1024 if (old_crtc_bw->max_bw[slice] != new_crtc_bw->max_bw[slice] || 1025 old_crtc_bw->active_planes[slice] != new_crtc_bw->active_planes[slice]) 1026 return true; 1027 } 1028 1029 if (old_bw_state->min_cdclk[pipe] != new_bw_state->min_cdclk[pipe]) 1030 return true; 1031 } 1032 1033 return false; 1034} 1035 1036static void skl_plane_calc_dbuf_bw(struct intel_bw_state *bw_state, 1037 struct intel_crtc *crtc, 1038 enum plane_id plane_id, 1039 const struct skl_ddb_entry *ddb, 1040 unsigned int data_rate) 1041{ 1042 struct drm_i915_private *i915 = to_i915(crtc->base.dev); 1043 struct intel_dbuf_bw *crtc_bw = &bw_state->dbuf_bw[crtc->pipe]; 1044 unsigned int dbuf_mask = skl_ddb_dbuf_slice_mask(i915, ddb); 1045 enum dbuf_slice slice; 1046 1047 /* 1048 * The arbiter can only really guarantee an 1049 * equal share of the total bw to each plane. 1050 */ 1051 for_each_dbuf_slice_in_mask(i915, slice, dbuf_mask) { 1052 crtc_bw->max_bw[slice] = max(crtc_bw->max_bw[slice], data_rate); 1053 crtc_bw->active_planes[slice] |= BIT(plane_id); 1054 } 1055} 1056 1057static void skl_crtc_calc_dbuf_bw(struct intel_bw_state *bw_state, 1058 const struct intel_crtc_state *crtc_state) 1059{ 1060 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); 1061 struct drm_i915_private *i915 = to_i915(crtc->base.dev); 1062 struct intel_dbuf_bw *crtc_bw = &bw_state->dbuf_bw[crtc->pipe]; 1063 enum plane_id plane_id; 1064 1065 memset(crtc_bw, 0, sizeof(*crtc_bw)); 1066 1067 if (!crtc_state->hw.active) 1068 return; 1069 1070 for_each_plane_id_on_crtc(crtc, plane_id) { 1071 /* 1072 * We assume cursors are small enough 1073 * to not cause bandwidth problems. 1074 */ 1075 if (plane_id == PLANE_CURSOR) 1076 continue; 1077 1078 skl_plane_calc_dbuf_bw(bw_state, crtc, plane_id, 1079 &crtc_state->wm.skl.plane_ddb[plane_id], 1080 crtc_state->data_rate[plane_id]); 1081 1082 if (DISPLAY_VER(i915) < 11) 1083 skl_plane_calc_dbuf_bw(bw_state, crtc, plane_id, 1084 &crtc_state->wm.skl.plane_ddb_y[plane_id], 1085 crtc_state->data_rate[plane_id]); 1086 } 1087} 1088 1089/* "Maximum Data Buffer Bandwidth" */ 1090static int 1091intel_bw_dbuf_min_cdclk(struct drm_i915_private *i915, 1092 const struct intel_bw_state *bw_state) 1093{ 1094 unsigned int total_max_bw = 0; 1095 enum dbuf_slice slice; 1096 1097 for_each_dbuf_slice(i915, slice) { 1098 int num_active_planes = 0; 1099 unsigned int max_bw = 0; 1100 enum pipe pipe; 1101 1102 /* 1103 * The arbiter can only really guarantee an 1104 * equal share of the total bw to each plane. 1105 */ 1106 for_each_pipe(i915, pipe) { 1107 const struct intel_dbuf_bw *crtc_bw = &bw_state->dbuf_bw[pipe]; 1108 1109 max_bw = max(crtc_bw->max_bw[slice], max_bw); 1110 num_active_planes += hweight8(crtc_bw->active_planes[slice]); 1111 } 1112 max_bw *= num_active_planes; 1113 1114 total_max_bw = max(total_max_bw, max_bw); 1115 } 1116 1117 return DIV_ROUND_UP(total_max_bw, 64); 1118} 1119 1120int intel_bw_min_cdclk(struct drm_i915_private *i915, 1121 const struct intel_bw_state *bw_state) 1122{ 1123 enum pipe pipe; 1124 int min_cdclk; 1125 1126 min_cdclk = intel_bw_dbuf_min_cdclk(i915, bw_state); 1127 1128 for_each_pipe(i915, pipe) 1129 min_cdclk = max(bw_state->min_cdclk[pipe], min_cdclk); 1130 1131 return min_cdclk; 1132} 1133 1134int intel_bw_calc_min_cdclk(struct intel_atomic_state *state, 1135 bool *need_cdclk_calc) 1136{ 1137 struct drm_i915_private *dev_priv = to_i915(state->base.dev); 1138 struct intel_bw_state *new_bw_state = NULL; 1139 const struct intel_bw_state *old_bw_state = NULL; 1140 const struct intel_cdclk_state *cdclk_state; 1141 const struct intel_crtc_state *crtc_state; 1142 int old_min_cdclk, new_min_cdclk; 1143 struct intel_crtc *crtc; 1144 int i; 1145 1146 if (DISPLAY_VER(dev_priv) < 9) 1147 return 0; 1148 1149 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) { 1150 new_bw_state = intel_atomic_get_bw_state(state); 1151 if (IS_ERR(new_bw_state)) 1152 return PTR_ERR(new_bw_state); 1153 1154 old_bw_state = intel_atomic_get_old_bw_state(state); 1155 1156 skl_crtc_calc_dbuf_bw(new_bw_state, crtc_state); 1157 1158 new_bw_state->min_cdclk[crtc->pipe] = 1159 intel_bw_crtc_min_cdclk(crtc_state); 1160 } 1161 1162 if (!old_bw_state) 1163 return 0; 1164 1165 if (intel_bw_state_changed(dev_priv, old_bw_state, new_bw_state)) { 1166 int ret = intel_atomic_lock_global_state(&new_bw_state->base); 1167 if (ret) 1168 return ret; 1169 } 1170 1171 old_min_cdclk = intel_bw_min_cdclk(dev_priv, old_bw_state); 1172 new_min_cdclk = intel_bw_min_cdclk(dev_priv, new_bw_state); 1173 1174 /* 1175 * No need to check against the cdclk state if 1176 * the min cdclk doesn't increase. 1177 * 1178 * Ie. we only ever increase the cdclk due to bandwidth 1179 * requirements. This can reduce back and forth 1180 * display blinking due to constant cdclk changes. 1181 */ 1182 if (new_min_cdclk <= old_min_cdclk) 1183 return 0; 1184 1185 cdclk_state = intel_atomic_get_cdclk_state(state); 1186 if (IS_ERR(cdclk_state)) 1187 return PTR_ERR(cdclk_state); 1188 1189 /* 1190 * No need to recalculate the cdclk state if 1191 * the min cdclk doesn't increase. 1192 * 1193 * Ie. we only ever increase the cdclk due to bandwidth 1194 * requirements. This can reduce back and forth 1195 * display blinking due to constant cdclk changes. 1196 */ 1197 if (new_min_cdclk <= cdclk_state->bw_min_cdclk) 1198 return 0; 1199 1200 drm_dbg_kms(&dev_priv->drm, 1201 "new bandwidth min cdclk (%d kHz) > old min cdclk (%d kHz)\n", 1202 new_min_cdclk, cdclk_state->bw_min_cdclk); 1203 *need_cdclk_calc = true; 1204 1205 return 0; 1206} 1207 1208static int intel_bw_check_data_rate(struct intel_atomic_state *state, bool *changed) 1209{ 1210 struct drm_i915_private *i915 = to_i915(state->base.dev); 1211 const struct intel_crtc_state *new_crtc_state, *old_crtc_state; 1212 struct intel_crtc *crtc; 1213 int i; 1214 1215 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, 1216 new_crtc_state, i) { 1217 unsigned int old_data_rate = 1218 intel_bw_crtc_data_rate(old_crtc_state); 1219 unsigned int new_data_rate = 1220 intel_bw_crtc_data_rate(new_crtc_state); 1221 unsigned int old_active_planes = 1222 intel_bw_crtc_num_active_planes(old_crtc_state); 1223 unsigned int new_active_planes = 1224 intel_bw_crtc_num_active_planes(new_crtc_state); 1225 struct intel_bw_state *new_bw_state; 1226 1227 /* 1228 * Avoid locking the bw state when 1229 * nothing significant has changed. 1230 */ 1231 if (old_data_rate == new_data_rate && 1232 old_active_planes == new_active_planes) 1233 continue; 1234 1235 new_bw_state = intel_atomic_get_bw_state(state); 1236 if (IS_ERR(new_bw_state)) 1237 return PTR_ERR(new_bw_state); 1238 1239 new_bw_state->data_rate[crtc->pipe] = new_data_rate; 1240 new_bw_state->num_active_planes[crtc->pipe] = new_active_planes; 1241 1242 *changed = true; 1243 1244 drm_dbg_kms(&i915->drm, 1245 "[CRTC:%d:%s] data rate %u num active planes %u\n", 1246 crtc->base.base.id, crtc->base.name, 1247 new_bw_state->data_rate[crtc->pipe], 1248 new_bw_state->num_active_planes[crtc->pipe]); 1249 } 1250 1251 return 0; 1252} 1253 1254int intel_bw_atomic_check(struct intel_atomic_state *state) 1255{ 1256 bool changed = false; 1257 struct drm_i915_private *i915 = to_i915(state->base.dev); 1258 struct intel_bw_state *new_bw_state; 1259 const struct intel_bw_state *old_bw_state; 1260 int ret; 1261 1262 /* FIXME earlier gens need some checks too */ 1263 if (DISPLAY_VER(i915) < 11) 1264 return 0; 1265 1266 ret = intel_bw_check_data_rate(state, &changed); 1267 if (ret) 1268 return ret; 1269 1270 old_bw_state = intel_atomic_get_old_bw_state(state); 1271 new_bw_state = intel_atomic_get_new_bw_state(state); 1272 1273 if (new_bw_state && 1274 intel_can_enable_sagv(i915, old_bw_state) != 1275 intel_can_enable_sagv(i915, new_bw_state)) 1276 changed = true; 1277 1278 /* 1279 * If none of our inputs (data rates, number of active 1280 * planes, SAGV yes/no) changed then nothing to do here. 1281 */ 1282 if (!changed) 1283 return 0; 1284 1285 ret = intel_bw_check_qgv_points(i915, old_bw_state, new_bw_state); 1286 if (ret) 1287 return ret; 1288 1289 return 0; 1290} 1291 1292static struct intel_global_state * 1293intel_bw_duplicate_state(struct intel_global_obj *obj) 1294{ 1295 struct intel_bw_state *state; 1296 1297 state = kmemdup(obj->state, sizeof(*state), GFP_KERNEL); 1298 if (!state) 1299 return NULL; 1300 1301 return &state->base; 1302} 1303 1304static void intel_bw_destroy_state(struct intel_global_obj *obj, 1305 struct intel_global_state *state) 1306{ 1307 kfree(state); 1308} 1309 1310static const struct intel_global_state_funcs intel_bw_funcs = { 1311 .atomic_duplicate_state = intel_bw_duplicate_state, 1312 .atomic_destroy_state = intel_bw_destroy_state, 1313}; 1314 1315int intel_bw_init(struct drm_i915_private *dev_priv) 1316{ 1317 struct intel_bw_state *state; 1318 1319 state = kzalloc(sizeof(*state), GFP_KERNEL); 1320 if (!state) 1321 return -ENOMEM; 1322 1323 intel_atomic_global_obj_init(dev_priv, &dev_priv->display.bw.obj, 1324 &state->base, &intel_bw_funcs); 1325 1326 return 0; 1327} 1328