opensslconf.h revision 1.1 
1/* opensslconf.h */
2/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
3
4/* OpenSSL was configured with the following options: */
5#ifndef OPENSSL_DOING_MAKEDEPEND
6
7
8#ifndef OPENSSL_NO_CAMELLIA
9# define OPENSSL_NO_CAMELLIA
10#endif
11#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
12# define OPENSSL_NO_EC_NISTP_64_GCC_128
13#endif
14#ifndef OPENSSL_NO_CMS
15# define OPENSSL_NO_CMS
16#endif
17#ifndef OPENSSL_NO_GMP
18# define OPENSSL_NO_GMP
19#endif
20#ifndef OPENSSL_NO_GOST
21# define OPENSSL_NO_GOST
22#endif
23#ifndef OPENSSL_NO_JPAKE
24# define OPENSSL_NO_JPAKE
25#endif
26#ifndef OPENSSL_NO_KRB5
27# define OPENSSL_NO_KRB5
28#endif
29#ifndef OPENSSL_NO_MD2
30# define OPENSSL_NO_MD2
31#endif
32#ifndef OPENSSL_NO_RC5
33# define OPENSSL_NO_RC5
34#endif
35#ifndef OPENSSL_NO_RFC3779
36# define OPENSSL_NO_RFC3779
37#endif
38#ifndef OPENSSL_NO_SCTP
39# define OPENSSL_NO_SCTP
40#endif
41#ifndef OPENSSL_NO_SEED
42# define OPENSSL_NO_SEED
43#endif
44#ifndef OPENSSL_NO_SRP
45# define OPENSSL_NO_SRP
46#endif
47#ifndef OPENSSL_NO_SSL2
48# define OPENSSL_NO_SSL2
49#endif
50#ifndef OPENSSL_NO_STORE
51# define OPENSSL_NO_STORE
52#endif
53
54#endif /* OPENSSL_DOING_MAKEDEPEND */
55
56#ifndef OPENSSL_THREADS
57# define OPENSSL_THREADS
58#endif
59#ifndef OPENSSL_NO_DYNAMIC_ENGINE
60# define OPENSSL_NO_DYNAMIC_ENGINE
61#endif
62
63/* The OPENSSL_NO_* macros are also defined as NO_* if the application
64   asks for it.  This is a transient feature that is provided for those
65   who haven't had the time to do the appropriate changes in their
66   applications.  */
67#ifdef OPENSSL_ALGORITHM_DEFINES
68# if defined(OPENSSL_NO_CAMELLIA) && !defined(NO_CAMELLIA)
69#  define NO_CAMELLIA
70# endif
71# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128)
72#  define NO_EC_NISTP_64_GCC_128
73# endif
74# if defined(OPENSSL_NO_CMS) && !defined(NO_CMS)
75#  define NO_CMS
76# endif
77# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
78#  define NO_GMP
79# endif
80# if defined(OPENSSL_NO_GOST) && !defined(NO_GOST)
81#  define NO_GOST
82# endif
83# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
84#  define NO_JPAKE
85# endif
86# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
87#  define NO_KRB5
88# endif
89# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
90#  define NO_MD2
91# endif
92# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
93#  define NO_RC5
94# endif
95# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
96#  define NO_RFC3779
97# endif
98# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP)
99#  define NO_SCTP
100# endif
101# if defined(OPENSSL_NO_SEED) && !defined(NO_SEED)
102#  define NO_SEED
103# endif
104# if defined(OPENSSL_NO_SRP) && !defined(NO_SRP)
105#  define NO_SRP
106# endif
107# if defined(OPENSSL_NO_SSL2) && !defined(NO_SSL2)
108#  define NO_SSL2
109# endif
110# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE)
111#  define NO_STORE
112# endif
113#endif
114
115/* crypto/opensslconf.h.in */
116
117/* Generate 80386 code? */
118#undef I386_ONLY
119
120#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
121#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
122#define ENGINESDIR "/usr/lib/engines"
123#define OPENSSLDIR "/etc/ssl"
124#endif
125#endif
126
127#undef OPENSSL_UNISTD
128#define OPENSSL_UNISTD <unistd.h>
129
130#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
131
132#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
133#define IDEA_INT unsigned int
134#endif
135
136#if defined(HEADER_MD2_H) && !defined(MD2_INT)
137#define MD2_INT unsigned int
138#endif
139
140#if defined(HEADER_RC2_H) && !defined(RC2_INT)
141/* I need to put in a mod for the alpha - eay */
142#define RC2_INT unsigned int
143#endif
144
145#if defined(HEADER_RC4_H)
146#if !defined(RC4_INT)
147/* using int types make the structure larger but make the code faster
148 * on most boxes I have tested - up to %20 faster. */
149/*
150 * I don't know what does "most" mean, but declaring "int" is a must on:
151 * - Intel P6 because partial register stalls are very expensive;
152 * - elder Alpha because it lacks byte load/store instructions;
153 */
154#define RC4_INT unsigned int
155#endif
156#if !defined(RC4_CHUNK)
157/*
158 * This enables code handling data aligned at natural CPU word
159 * boundary. See crypto/rc4/rc4_enc.c for further details.
160 */
161#define RC4_CHUNK unsigned long
162#endif
163#endif
164
165#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
166/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
167 * %20 speed up (longs are 8 bytes, int's are 4). */
168#ifndef DES_LONG
169#define DES_LONG unsigned int
170#endif
171#endif
172
173#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
174#define CONFIG_HEADER_BN_H
175#undef BN_LLONG
176
177/* Should we define BN_DIV2W here? */
178
179/* Only one for the following should be defined */
180/* The prime number generation stuff may not work when
181 * EIGHT_BIT but I don't care since I've only used this mode
182 * for debuging the bignum libraries */
183#define SIXTY_FOUR_BIT_LONG
184#undef SIXTY_FOUR_BIT
185#undef THIRTY_TWO_BIT
186#undef SIXTEEN_BIT
187#undef EIGHT_BIT
188#endif
189
190#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
191#define CONFIG_HEADER_RC4_LOCL_H
192/* if this is defined data[i] is used instead of *data, this is a %20
193 * speedup on x86 */
194#undef RC4_INDEX
195#endif
196
197#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
198#define CONFIG_HEADER_BF_LOCL_H
199#define BF_PTR
200#endif /* HEADER_BF_LOCL_H */
201
202#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
203#define CONFIG_HEADER_DES_LOCL_H
204#ifndef DES_DEFAULT_OPTIONS
205/* the following is tweaked from a config script, that is why it is a
206 * protected undef/define */
207#ifndef DES_PTR
208#define DES_PTR
209#endif
210
211/* This helps C compiler generate the correct code for multiple functional
212 * units.  It reduces register dependancies at the expense of 2 more
213 * registers */
214#ifndef DES_RISC1
215#undef DES_RISC1
216#endif
217
218#ifndef DES_RISC2
219#define DES_RISC2
220#endif
221
222#if defined(DES_RISC1) && defined(DES_RISC2)
223YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
224#endif
225
226/* Unroll the inner loop, this sometimes helps, sometimes hinders.
227 * Very mucy CPU dependant */
228#ifndef DES_UNROLL
229#undef DES_UNROLL
230#endif
231
232/* These default values were supplied by
233 * Peter Gutman <pgut001@cs.auckland.ac.nz>
234 * They are only used if nothing else has been defined */
235#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
236/* Special defines which change the way the code is built depending on the
237   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
238   even newer MIPS CPU's, but at the moment one size fits all for
239   optimization options.  Older Sparc's work better with only UNROLL, but
240   there's no way to tell at compile time what it is you're running on */
241
242#if defined( sun )		/* Newer Sparc's */
243#  define DES_PTR
244#  define DES_RISC1
245#  define DES_UNROLL
246#elif defined( __ultrix )	/* Older MIPS */
247#  define DES_PTR
248#  define DES_RISC2
249#  define DES_UNROLL
250#elif defined( __osf1__ )	/* Alpha */
251#  define DES_PTR
252#  define DES_RISC2
253#elif defined ( _AIX )		/* RS6000 */
254  /* Unknown */
255#elif defined( __hpux )		/* HP-PA */
256  /* Unknown */
257#elif defined( __aux )		/* 68K */
258  /* Unknown */
259#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
260#  define DES_UNROLL
261#elif defined( __sgi )		/* Newer MIPS */
262#  define DES_PTR
263#  define DES_RISC2
264#  define DES_UNROLL
265#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
266#  define DES_PTR
267#  define DES_RISC1
268#  define DES_UNROLL
269#endif /* Systems-specific speed defines */
270#endif
271
272#endif /* DES_DEFAULT_OPTIONS */
273#endif /* HEADER_DES_LOCL_H */
274