Makefile.in.in revision 1.8
1# Makefile for PO directory in any package using GNU gettext. 2# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper <drepper@gnu.ai.mit.edu> 3# 4# This file can be copied and used freely without restrictions. It can 5# be used in projects which are not available under the GNU General Public 6# License but which still want to provide support for the GNU gettext 7# functionality. 8# Please note that the actual code of GNU gettext is covered by the GNU 9# General Public License and is *not* in the public domain. 10 11PACKAGE = @PACKAGE@ 12VERSION = @VERSION@ 13 14SHELL = /bin/sh 15@SET_MAKE@ 16 17srcdir = @srcdir@ 18top_srcdir = @top_srcdir@ 19VPATH = @srcdir@ 20 21prefix = @prefix@ 22exec_prefix = @exec_prefix@ 23datadir = @datadir@ 24localedir = $(datadir)/locale 25gettextsrcdir = $(datadir)/gettext/po 26 27INSTALL = @INSTALL@ 28INSTALL_DATA = @INSTALL_DATA@ 29MKINSTALLDIRS = @MKINSTALLDIRS@ 30mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac` 31 32GMSGFMT = @GMSGFMT@ 33MSGFMT = @MSGFMT@ 34XGETTEXT = @XGETTEXT@ 35MSGMERGE = msgmerge 36MSGMERGE_UPDATE = @MSGMERGE@ --update 37MSGINIT = msginit 38MSGCONV = msgconv 39MSGFILTER = msgfilter 40 41POFILES = @POFILES@ 42GMOFILES = @GMOFILES@ 43UPDATEPOFILES = @UPDATEPOFILES@ 44DUMMYPOFILES = @DUMMYPOFILES@ 45DISTFILES.common = Makefile.in.in Makevars remove-potcdate.sin \ 46$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) 47DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \ 48$(POFILES) $(GMOFILES) \ 49$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) 50 51POTFILES = \ 52 53CATALOGS = @CATALOGS@ 54 55# Makevars gets inserted here. (Don't remove this line!) 56 57.SUFFIXES: 58.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update 59 60.po.mo: 61 @echo "$(MSGFMT) -c -o $@ $<"; \ 62 $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ 63 64#.po.gmo: 65# @lang=`echo $* | sed -e 's,.*/,,'`; \ 66# test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ 67# echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ 68# cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo 69# 70.sin.sed: 71 sed -e '/^#/d' $< > t-$@ 72 mv t-$@ $@ 73 74 75all: all-@USE_NLS@ 76 77all-yes: $(CATALOGS) 78all-no: 79 80# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', 81# otherwise packages like GCC can not be built if only parts of the source 82# have been downloaded. 83 84$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed 85 $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ 86 --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ 87 --files-from=$(srcdir)/POTFILES.in \ 88 --copyright-holder='$(COPYRIGHT_HOLDER)' 89 test ! -f $(DOMAIN).po || { \ 90 if test -f $(srcdir)/$(DOMAIN).pot; then \ 91 sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ 92 sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ 93 if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ 94 rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ 95 else \ 96 rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ 97 mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ 98 fi; \ 99 else \ 100 mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ 101 fi; \ 102 } 103 104$(srcdir)/$(DOMAIN).pot: 105 $(MAKE) $(DOMAIN).pot-update 106 107$(POFILES): $(srcdir)/$(DOMAIN).pot 108 @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ 109 test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ 110 echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ 111 cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot 112 113 114install: install-exec install-data 115install-exec: 116install-data: install-data-@USE_NLS@ 117 if test "$(PACKAGE)" = "gettext"; then \ 118 $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ 119 for file in $(DISTFILES.common); do \ 120 $(INSTALL_DATA) $(srcdir)/$$file \ 121 $(DESTDIR)$(gettextsrcdir)/$$file; \ 122 done; \ 123 else \ 124 : ; \ 125 fi 126install-data-no: all 127install-data-yes: all 128 $(mkinstalldirs) $(DESTDIR)$(datadir) 129 @catalogs='$(CATALOGS)'; \ 130 for cat in $$catalogs; do \ 131 cat=`basename $$cat`; \ 132 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ 133 dir=$(localedir)/$$lang/LC_MESSAGES; \ 134 $(mkinstalldirs) $(DESTDIR)$$dir; \ 135 if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ 136 $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ 137 echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ 138 for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ 139 if test -n "$$lc"; then \ 140 if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ 141 link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ 142 mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ 143 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ 144 (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ 145 for file in *; do \ 146 if test -f $$file; then \ 147 ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ 148 fi; \ 149 done); \ 150 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ 151 else \ 152 if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ 153 :; \ 154 else \ 155 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ 156 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ 157 fi; \ 158 fi; \ 159 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ 160 ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ 161 ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ 162 cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ 163 echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ 164 fi; \ 165 done; \ 166 done 167 168install-strip: install 169 170installdirs: installdirs-exec installdirs-data 171installdirs-exec: 172installdirs-data: installdirs-data-@USE_NLS@ 173 if test "$(PACKAGE)" = "gettext"; then \ 174 $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ 175 else \ 176 : ; \ 177 fi 178installdirs-data-no: 179installdirs-data-yes: 180 $(mkinstalldirs) $(DESTDIR)$(datadir) 181 @catalogs='$(CATALOGS)'; \ 182 for cat in $$catalogs; do \ 183 cat=`basename $$cat`; \ 184 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ 185 dir=$(localedir)/$$lang/LC_MESSAGES; \ 186 $(mkinstalldirs) $(DESTDIR)$$dir; \ 187 for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ 188 if test -n "$$lc"; then \ 189 if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ 190 link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ 191 mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ 192 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ 193 (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ 194 for file in *; do \ 195 if test -f $$file; then \ 196 ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ 197 fi; \ 198 done); \ 199 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ 200 else \ 201 if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ 202 :; \ 203 else \ 204 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ 205 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ 206 fi; \ 207 fi; \ 208 fi; \ 209 done; \ 210 done 211 212# Define this as empty until I found a useful application. 213installcheck: 214 215uninstall: uninstall-exec uninstall-data 216uninstall-exec: 217uninstall-data: uninstall-data-@USE_NLS@ 218 if test "$(PACKAGE)" = "gettext"; then \ 219 for file in $(DISTFILES.common); do \ 220 rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ 221 done; \ 222 else \ 223 : ; \ 224 fi 225uninstall-data-no: 226uninstall-data-yes: 227 catalogs='$(CATALOGS)'; \ 228 for cat in $$catalogs; do \ 229 cat=`basename $$cat`; \ 230 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ 231 for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ 232 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ 233 done; \ 234 done 235 236check: all 237 238dvi info tags TAGS ID: 239 240mostlyclean: 241 rm -f remove-potcdate.sed 242 rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po 243 rm -fr *.o 244 245clean: mostlyclean 246 247distclean: clean 248 rm -f Makefile Makefile.in POTFILES *.mo 249 250maintainer-clean: distclean 251 @echo "This command is intended for maintainers to use;" 252 @echo "it deletes files that may require special tools to rebuild." 253 rm -f $(GMOFILES) 254 255distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) 256dist distdir: 257 $(MAKE) update-po 258 @$(MAKE) dist2 259# This is a separate target because 'update-po' must be executed before. 260dist2: $(DISTFILES) 261 dists="$(DISTFILES)"; \ 262 if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \ 263 if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ 264 for file in $$dists; do \ 265 if test -f $$file; then \ 266 cp -p $$file $(distdir); \ 267 else \ 268 cp -p $(srcdir)/$$file $(distdir); \ 269 fi; \ 270 done 271 272update-po: Makefile 273 $(MAKE) $(DOMAIN).pot-update 274 $(MAKE) $(UPDATEPOFILES) 275 $(MAKE) update-gmo 276 277# General rule for updating PO files. 278 279.nop.po-update: 280 @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ 281 if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \ 282 tmpdir=`pwd`; \ 283 echo "$$lang:"; \ 284 test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ 285 echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ 286 cd $(srcdir); \ 287 if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ 288 if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ 289 rm -f $$tmpdir/$$lang.new.po; \ 290 else \ 291 if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ 292 :; \ 293 else \ 294 echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ 295 exit 1; \ 296 fi; \ 297 fi; \ 298 else \ 299 echo "msgmerge for $$lang.po failed!" 1>&2; \ 300 rm -f $$tmpdir/$$lang.new.po; \ 301 fi 302 303$(DUMMYPOFILES): 304 305update-gmo: Makefile $(GMOFILES) 306 @: 307 308Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in 309 cd $(top_builddir) \ 310 && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \ 311 $(SHELL) ./config.status 312 313force: 314 315# Tell versions [3.59,3.63) of GNU make not to export all variables. 316# Otherwise a system limit (for SysV at least) may be exceeded. 317.NOEXPORT: 318