Makefile revision 1.28
1# 2# Makefile to build perl on Windows using Microsoft NMAKE. 3# Supported compilers: 4# Microsoft Visual C++ 6.0 or later 5# Windows SDK 64-bit compiler and tools 6# 7# This is set up to build a perl.exe that runs off a shared library 8# (perl524.dll). Also makes individual DLLs for the XS extensions. 9# 10 11## 12## Make sure you read README.win32 *before* you mess with anything here! 13## 14 15## 16## Build configuration. Edit the values below to suit your needs. 17## 18 19# 20# Set these to wherever you want "nmake install" to put your 21# newly built perl. 22# 23INST_DRV = c: 24INST_TOP = $(INST_DRV)\perl 25 26# 27# Uncomment if you want to build a 32-bit Perl using a 32-bit compiler 28# on a 64-bit version of Windows. 29# 30#WIN64 = undef 31 32# 33# Comment this out if you DON'T want your perl installation to be versioned. 34# This means that the new installation will overwrite any files from the 35# old installation at the same INST_TOP location. Leaving it enabled is 36# the safest route, as perl adds the extra version directory to all the 37# locations it installs files to. If you disable it, an alternative 38# versioned installation can be obtained by setting INST_TOP above to a 39# path that includes an arbitrary version string. 40# 41#INST_VER = \5.24.2 42 43# 44# Comment this out if you DON'T want your perl installation to have 45# architecture specific components. This means that architecture- 46# specific files will be installed along with the architecture-neutral 47# files. Leaving it enabled is safer and more flexible, in case you 48# want to build multiple flavors of perl and install them together in 49# the same location. Commenting it out gives you a simpler 50# installation that is easier to understand for beginners. 51# 52#INST_ARCH = \$(ARCHNAME) 53 54# 55# Uncomment this if you want perl to run 56# $Config{sitelibexp}\sitecustomize.pl 57# before anything else. This script can then be set up, for example, 58# to add additional entries to @INC. 59# 60#USE_SITECUST = define 61 62# 63# uncomment to enable multiple interpreters. This is needed for fork() 64# emulation and for thread support, and is auto-enabled by USE_IMP_SYS 65# and USE_ITHREADS below. 66# 67USE_MULTI = define 68 69# 70# Interpreter cloning/threads; now reasonably complete. 71# This should be enabled to get the fork() emulation. This needs (and 72# will auto-enable) USE_MULTI above. 73# 74USE_ITHREADS = define 75 76# 77# uncomment to enable the implicit "host" layer for all system calls 78# made by perl. This is also needed to get fork(). This needs (and 79# will auto-enable) USE_MULTI above. 80# 81USE_IMP_SYS = define 82 83# 84# Comment this out if you don't want to enable large file support for 85# some reason. Should normally only be changed to maintain compatibility 86# with an older release of perl. 87# 88USE_LARGE_FILES = define 89 90# 91# Uncomment this if you're building a 32-bit perl and want 64-bit integers. 92# (If you're building a 64-bit perl then you will have 64-bit integers whether 93# or not this is uncommented.) 94# Note: This option is not supported in 32-bit MSVC60 builds. 95# 96#USE_64_BIT_INT = define 97 98# 99# Uncomment this if you want to disable looking up values from 100# HKEY_CURRENT_USER\Software\Perl and HKEY_LOCAL_MACHINE\Software\Perl in 101# the Registry. 102# 103#USE_NO_REGISTRY = define 104 105# 106# uncomment exactly one of the following 107# 108# Visual C++ 6.0 (aka Visual C++ 98) 109CCTYPE = MSVC60 110# Visual C++ .NET 2002/2003 (aka Visual C++ 7.0/7.1) (full version) 111#CCTYPE = MSVC70 112# Visual C++ Toolkit 2003 (aka Visual C++ 7.1) (free command-line tools) 113#CCTYPE = MSVC70FREE 114# Windows Server 2003 SP1 Platform SDK (April 2005) 115#CCTYPE = SDK2003SP1 116# Visual C++ 2005 (aka Visual C++ 8.0) (full version) 117#CCTYPE = MSVC80 118# Visual C++ 2005 Express Edition (aka Visual C++ 8.0) (free version) 119#CCTYPE = MSVC80FREE 120# Visual C++ 2008 (aka Visual C++ 9.0) (full version) 121#CCTYPE = MSVC90 122# Visual C++ 2008 Express Edition (aka Visual C++ 9.0) (free version) 123#CCTYPE = MSVC90FREE 124# Visual C++ 2010 (aka Visual C++ 10.0) (full version) 125#CCTYPE = MSVC100 126# Visual C++ 2010 Express Edition (aka Visual C++ 10.0) (free version) 127#CCTYPE = MSVC100FREE 128# Visual C++ 2012 (aka Visual C++ 11.0) (full version) 129#CCTYPE = MSVC110 130# Visual C++ 2012 Express Edition (aka Visual C++ 11.0) (free version) 131#CCTYPE = MSVC110FREE 132# Visual C++ 2013 (aka Visual C++ 12.0) (full version) 133#CCTYPE = MSVC120 134# Visual C++ 2013 Express Edition (aka Visual C++ 12.0) (free version) 135#CCTYPE = MSVC120FREE 136 137# 138# If you are using Intel C++ Compiler uncomment this 139# 140#__ICC = define 141 142# 143# Uncomment this if you want to build everything in C++ mode 144# 145#USE_CPLUSPLUS = define 146 147# 148# uncomment next line if you want debug version of perl (big/slow) 149# If not enabled, we automatically try to use maximum optimization 150# with all compilers that are known to have a working optimizer. 151# 152# You can also set CFG = DebugSymbols for a slightly smaller/faster 153# debug build without the special debugging code in perl which is 154# enabled via -DDEBUGGING; 155# 156# or you can set CFG = DebugFull for an even fuller (bigger/slower) 157# debug build using the debug version of the CRT, and enabling VC++ 158# debug features such as extra assertions and invalid parameter warnings 159# in perl and CRT code via -D_DEBUG. (Note that the invalid parameter 160# handler does get triggered from time to time in this configuration, 161# which causes warnings to be printed on STDERR, which in turn causes a 162# few tests to fail.) 163# 164#CFG = Debug 165 166# 167# uncomment to enable linking with setargv.obj under the Visual C 168# compiler. Setting this options enables perl to expand wildcards in 169# arguments, but it may be harder to use alternate methods like 170# File::DosGlob that are more powerful. This option is supported only with 171# Visual C. 172# 173#USE_SETARGV = define 174 175# 176# set this if you wish to use perl's malloc 177# WARNING: Turning this on/off WILL break binary compatibility with extensions 178# you may have compiled with/without it. Be prepared to recompile all 179# extensions if you change the default. Currently, this cannot be enabled 180# if you ask for USE_IMP_SYS above. 181# 182#PERL_MALLOC = define 183 184# 185# set this to enable debugging mstats 186# This must be enabled to use the Devel::Peek::mstat() function. This cannot 187# be enabled without PERL_MALLOC as well. 188# 189#DEBUG_MSTATS = define 190 191# 192# set this to additionally provide a statically linked perl-static.exe. 193# Note that dynamic loading will not work with this perl, so you must 194# include required modules statically using the STATIC_EXT or ALL_STATIC 195# variables below. A static library perl524s.lib will also be created. 196# Ordinary perl.exe is not affected by this option. 197# 198#BUILD_STATIC = define 199 200# 201# in addition to BUILD_STATIC the option ALL_STATIC makes *every* 202# extension get statically built 203# This will result in a very large perl executable, but the main purpose 204# is to have proper linking set so as to be able to create miscellaneous 205# executables with different built-in extensions 206# 207#ALL_STATIC = define 208 209# 210# 211# set the install locations of the compiler include/libraries 212# Running VCVARS32.BAT is *required* when using Visual C. 213# Some versions of Visual C don't define MSVCDIR in the environment, 214# so you may have to set CCHOME explicitly (spaces in the path name should 215# not be quoted) 216# 217CCHOME = $(MSVCDIR) 218CCINCDIR = $(CCHOME)\include 219CCLIBDIR = $(CCHOME)\lib 220 221# 222# Additional compiler flags can be specified here. 223# 224BUILDOPT = $(BUILDOPTEXTRA) 225 226# 227# This should normally be disabled. Enabling it will disable the File::Glob 228# implementation of CORE::glob. 229# 230#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB 231 232# 233# Perl needs to read scripts in text mode so that the DATA filehandle 234# works correctly with seek() and tell(), or around auto-flushes of 235# all filehandles (e.g. by system(), backticks, fork(), etc). 236# 237# The current version on the ByteLoader module on CPAN however only 238# works if scripts are read in binary mode. But before you disable text 239# mode script reading (and break some DATA filehandle functionality) 240# please check first if an updated ByteLoader isn't available on CPAN. 241# 242BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS 243 244# 245# specify semicolon-separated list of extra directories that modules will 246# look for libraries (spaces in path names need not be quoted) 247# 248EXTRALIBDIRS = 249 250# 251# set this to your email address (perl will guess a value from 252# from your loginname and your hostname, which may not be right) 253# 254#EMAIL = 255 256## 257## Build configuration ends. 258## 259 260##################### CHANGE THESE ONLY IF YOU MUST ##################### 261 262!IF "$(USE_IMP_SYS)" == "define" 263PERL_MALLOC = undef 264DEBUG_MSTATS = undef 265!ENDIF 266 267!IF "$(PERL_MALLOC)" == "" 268PERL_MALLOC = undef 269DEBUG_MSTATS = undef 270!ENDIF 271 272!IF "$(DEBUG_MSTATS)" == "" 273DEBUG_MSTATS = undef 274!ENDIF 275 276!IF "$(DEBUG_MSTATS)" == "define" 277BUILDOPT = $(BUILDOPT) -DPERL_DEBUGGING_MSTATS 278!ENDIF 279 280!IF "$(USE_SITECUST)" == "" 281USE_SITECUST = undef 282!ENDIF 283 284!IF "$(USE_MULTI)" == "" 285USE_MULTI = undef 286!ENDIF 287 288!IF "$(USE_ITHREADS)" == "" 289USE_ITHREADS = undef 290!ENDIF 291 292!IF "$(USE_IMP_SYS)" == "" 293USE_IMP_SYS = undef 294!ENDIF 295 296!IF "$(USE_LARGE_FILES)" == "" 297USE_LARGE_FILES = undef 298!ENDIF 299 300!IF "$(USE_64_BIT_INT)" == "" 301USE_64_BIT_INT = undef 302!ENDIF 303 304!IF "$(USE_NO_REGISTRY)" == "" 305USE_NO_REGISTRY = undef 306!ENDIF 307 308!IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef" 309USE_MULTI = define 310!ENDIF 311 312!IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef" 313USE_MULTI = define 314!ENDIF 315 316!IF "$(USE_SITECUST)" == "define" 317BUILDOPT = $(BUILDOPT) -DUSE_SITECUSTOMIZE 318!ENDIF 319 320!IF "$(USE_MULTI)" != "undef" 321BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT 322!ENDIF 323 324!IF "$(USE_IMP_SYS)" != "undef" 325BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS 326!ENDIF 327 328!IF "$(USE_NO_REGISTRY)" != "undef" 329BUILDOPT = $(BUILDOPT) -DWIN32_NO_REGISTRY 330!ENDIF 331 332!IF "$(PROCESSOR_ARCHITECTURE)" == "" 333PROCESSOR_ARCHITECTURE = x86 334!ENDIF 335 336!IF "$(WIN64)" == "" 337# When we are running from a 32bit cmd.exe on AMD64 then 338# PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432 339# is set to AMD64 340!IF "$(PROCESSOR_ARCHITEW6432)" != "" 341PROCESSOR_ARCHITECTURE = $(PROCESSOR_ARCHITEW6432) 342WIN64 = define 343!ELSE 344!IF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64" 345WIN64 = define 346!ELSE 347WIN64 = undef 348!ENDIF 349!ENDIF 350!ENDIF 351 352!IF "$(WIN64)" == "define" 353USE_64_BIT_INT = define 354!ENDIF 355 356# Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because 357# both link against MSVCRT.dll (which is part of Windows itself) and 358# not against a compiler specific versioned runtime. 359!IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60" 360CCTYPE = SDK2003SP1 361!ENDIF 362 363# Disable the 64-bit-int option for (32-bit) MSVC60 builds since that compiler 364# does not support it. 365!IF "$(CCTYPE)" == "MSVC60" 366!UNDEF USE_64_BIT_INT 367USE_64_BIT_INT = undef 368!ENDIF 369 370# Most relevant compiler-specific options fall into two groups: 371# either pre-MSVC80 or MSVC80 onwards, so define a macro for this. 372!IF "$(CCTYPE)" == "MSVC60" || \ 373 "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE" 374PREMSVC80 = define 375!ELSE 376PREMSVC80 = undef 377!ENDIF 378 379ARCHITECTURE = $(PROCESSOR_ARCHITECTURE) 380!IF "$(ARCHITECTURE)" == "AMD64" 381ARCHITECTURE = x64 382!ENDIF 383!IF "$(ARCHITECTURE)" == "IA64" 384ARCHITECTURE = ia64 385!ENDIF 386 387!IF "$(USE_MULTI)" == "define" 388ARCHNAME = MSWin32-$(ARCHITECTURE)-multi 389!ELSE 390ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio 391!ENDIF 392 393!IF "$(USE_ITHREADS)" == "define" 394ARCHNAME = $(ARCHNAME)-thread 395!ENDIF 396 397!IF "$(WIN64)" != "define" 398!IF "$(USE_64_BIT_INT)" == "define" 399ARCHNAME = $(ARCHNAME)-64int 400!ENDIF 401!ENDIF 402 403# All but the free version of VC++ 7.1 can load DLLs on demand. Makes the test 404# suite run in about 10% less time. 405!IF "$(CCTYPE)" != "MSVC70FREE" 406# If no registry, advapi32 is only used for Perl_pp_getlogin/getlogin/GetUserNameA 407# which is rare to execute 408!IF "$(USE_NO_REGISTRY)" != "undef" 409DELAYLOAD = -DELAYLOAD:ws2_32.dll -DELAYLOAD:advapi32.dll delayimp.lib 410MINIDELAYLOAD = 411!ELSE 412DELAYLOAD = -DELAYLOAD:ws2_32.dll delayimp.lib 413#miniperl never does any registry lookups 414MINIDELAYLOAD = -DELAYLOAD:advapi32.dll 415!ENDIF 416!ENDIF 417 418# Visual C++ 2005 and 2008 (VC++ 8.0 and 9.0) create manifest files for EXEs and 419# DLLs. These either need copying everywhere with the binaries, or else need 420# embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For 421# simplicity, embed them if they exist (and delete them afterwards so that they 422# don't get installed too). 423EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \ 424 if exist $@.manifest del $@.manifest 425EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \ 426 if exist $@.manifest del $@.manifest 427 428ARCHDIR = ..\lib\$(ARCHNAME) 429COREDIR = ..\lib\CORE 430AUTODIR = ..\lib\auto 431LIBDIR = ..\lib 432EXTDIR = ..\ext 433DISTDIR = ..\dist 434CPANDIR = ..\cpan 435PODDIR = ..\pod 436HTMLDIR = .\html 437 438# 439INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin 440INST_BIN = $(INST_SCRIPT)$(INST_ARCH) 441INST_LIB = $(INST_TOP)$(INST_VER)\lib 442INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) 443INST_COREDIR = $(INST_ARCHLIB)\CORE 444INST_HTML = $(INST_TOP)$(INST_VER)\html 445 446# 447# Programs to compile, build .lib files and link 448# 449 450!IF "$(__ICC)" != "define" 451CC = cl 452LINK32 = link 453!ELSE 454CC = icl 455LINK32 = xilink 456!ENDIF 457LIB32 = $(LINK32) -lib 458RSC = rc 459 460# 461# Options 462# 463 464INCLUDES = -I$(COREDIR) -I.\include -I. -I.. 465#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX 466DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT 467LOCDEFS = -DPERLDLL -DPERL_CORE 468CXX_FLAG = -TP -EHsc 469 470LIBC = msvcrt.lib 471 472!IF "$(CFG)" == "Debug" 473OPTIMIZE = -Od -MD -Zi -DDEBUGGING 474LINK_DBG = -debug 475!ELSE 476!IF "$(CFG)" == "DebugSymbols" 477OPTIMIZE = -Od -MD -Zi 478LINK_DBG = -debug 479!ELSE 480!IF "$(CFG)" == "DebugFull" 481LIBC = msvcrtd.lib 482OPTIMIZE = -Od -MDd -Zi -D_DEBUG -DDEBUGGING 483LINK_DBG = -debug 484!ELSE 485# -O1 yields smaller code, which turns out to be faster than -O2 on x86 and x64 486OPTIMIZE = -O1 -MD -Zi -DNDEBUG 487# we enable debug symbols in release builds also 488LINK_DBG = -debug -opt:ref,icf 489# you may want to enable this if you want COFF symbols in the executables 490# in addition to the PDB symbols. The default Dr. Watson that ships with 491# Windows can use the the former but not latter. The free WinDbg can be 492# installed to get better stack traces from just the PDB symbols, so we 493# avoid the bloat of COFF symbols by default. 494#LINK_DBG = $(LINK_DBG) -debugtype:both 495! IF "$(CCTYPE)" != "MSVC60" 496# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG) 497OPTIMIZE = $(OPTIMIZE) -GL 498LINK_DBG = $(LINK_DBG) -ltcg 499LIB_FLAGS = -ltcg 500! ENDIF 501!ENDIF 502!ENDIF 503!ENDIF 504 505!IF "$(WIN64)" == "define" 506DEFINES = $(DEFINES) -DWIN64 -DCONSERVATIVE 507OPTIMIZE = $(OPTIMIZE) -fp:precise 508!ENDIF 509 510# For now, silence warnings from VC++ 8.0 onwards about "unsafe" CRT functions 511# and POSIX CRT function names being deprecated. 512!IF "$(PREMSVC80)" == "undef" 513DEFINES = $(DEFINES) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE 514!ENDIF 515 516# In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to 517# 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T 518# preprocessor option to revert back to the old functionality for 519# backward compatibility. We define this symbol here for older 32-bit 520# compilers only (which aren't using it at all) for the sole purpose 521# of getting it into $Config{ccflags}. That way if someone builds 522# Perl itself with e.g. VC6 but later installs an XS module using VC8 523# the time_t types will still be compatible. 524!IF "$(WIN64)" == "undef" 525! IF "$(PREMSVC80)" == "define" 526BUILDOPT = $(BUILDOPT) -D_USE_32BIT_TIME_T 527! ENDIF 528!ENDIF 529 530LIBBASEFILES = \ 531 oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ 532 comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ 533 netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \ 534 version.lib odbc32.lib odbccp32.lib comctl32.lib 535 536# Avoid __intel_new_proc_init link error for libircmt. 537# libmmd is /MD equivelent, other variants exist. 538# libmmd is Intel C's math addon funcs to MS CRT, contains long doubles, C99, 539# and optimized C89 funcs 540!IF "$(__ICC)" == "define" 541LIBBASEFILES = $(LIBBASEFILES) libircmt.lib libmmd.lib 542!ENDIF 543 544# The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which 545# doesn't include the buffer overrun verification code used by the /GS switch. 546# Since the code links against libraries that are compiled with /GS, this 547# "security cookie verification" code must be included via bufferoverflow.lib. 548!IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1" 549LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib 550!ENDIF 551 552LIBFILES = $(LIBBASEFILES) $(LIBC) 553 554#EXTRACFLAGS = -nologo -GF -W4 -wd4127 -wd4706 555EXTRACFLAGS = -nologo -GF -W3 556!IF "$(__ICC)" == "define" 557EXTRACFLAGS = $(EXTRACFLAGS) -Qstd=c99 558!ENDIF 559!IF "$(USE_CPLUSPLUS)" == "define" 560EXTRACFLAGS = $(EXTRACFLAGS) $(CXX_FLAG) 561!ENDIF 562CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \ 563 $(PCHFLAGS) $(OPTIMIZE) 564LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ 565 -libpath:"$(INST_COREDIR)" \ 566 -machine:$(PROCESSOR_ARCHITECTURE) 567LIB_FLAGS = $(LIB_FLAGS) -nologo 568OBJOUT_FLAG = -Fo 569EXEOUT_FLAG = -Fe 570 571CFLAGS_O = $(CFLAGS) $(BUILDOPT) 572 573!IF "$(PREMSVC80)" == "undef" 574PRIV_LINK_FLAGS = $(PRIV_LINK_FLAGS) "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'" 575!ELSE 576RSC_FLAGS = -DINCLUDE_MANIFEST 577!ENDIF 578 579# For XP support in >= VS 2013 (VC++ 12.0), subsystem is always in Config.pm 580# LINK_FLAGS else subsystem is only needed for EXE building, not XS DLL building 581# Console vs GUI makes no difference for DLLs, so use default for cleaner 582# building cmd lines 583!IF "$(CCTYPE)" == "MSVC120" || "$(CCTYPE)" == "MSVC120FREE" \ 584 || "$(CCTYPE)" == "MSVC140" || "$(CCTYPE)" == "MSVC140FREE" 585! IF "$(WIN64)" == "define" 586LINK_FLAGS = $(LINK_FLAGS) -subsystem:console,"5.02" 587! ELSE 588LINK_FLAGS = $(LINK_FLAGS) -subsystem:console,"5.01" 589! ENDIF 590 591!ELSE 592PRIV_LINK_FLAGS = $(PRIV_LINK_FLAGS) -subsystem:console 593!ENDIF 594 595BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS) 596 597#################### do not edit below this line ####################### 598############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## 599 600o = .obj 601 602# 603# Rules 604# 605 606#clear the list, we dont support .cxx .bas .cbl .for .pas .f .f90 607# .asm .cpp are not currently used but they are included for completeness 608.SUFFIXES : 609.SUFFIXES : .c $(o) .cpp .asm .dll .lib .exe .rc .res 610 611.c$(o): 612 $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< 613 614.c.i: 615 $(CC) -c -I$(<D) $(CFLAGS_O) -P $(OBJOUT_FLAG)$@ $< 616 617.y.c: 618 $(NOOP) 619 620$(o).dll: 621 $(LINK32) -dll -implib:$(*B).lib -def:$(*B).def \ 622 -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL) 623 $(EMBED_DLL_MANI) 624 625.rc.res: 626 $(RSC) -i.. $(RSC_FLAGS) $< 627 628# 629# various targets 630 631# makedef.pl must be updated if this changes, and this should normally 632# only change when there is an incompatible revision of the public API. 633PERLIMPLIB = ..\perl524.lib 634PERLSTATICLIB = ..\perl524s.lib 635PERLDLL = ..\perl524.dll 636 637MINIPERL = ..\miniperl.exe 638MINIDIR = .\mini 639PERLEXE = ..\perl.exe 640WPERLEXE = ..\wperl.exe 641PERLEXESTATIC = ..\perl-static.exe 642GLOBEXE = ..\perlglob.exe 643CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl 644GENUUDMAP = ..\generate_uudmap.exe 645!IF "$(BUILD_STATIC)" == "define" || "$(ALL_STATIC)" == "define" 646PERLSTATIC = static 647!ELSE 648PERLSTATIC = 649!ENDIF 650 651# Unicode data files generated by mktables 652FIRSTUNIFILE = ..\lib\unicore\Decomposition.pl 653UNIDATAFILES = ..\lib\unicore\Decomposition.pl \ 654 ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \ 655 ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst \ 656 ..\lib\unicore\UCD.pl ..\lib\unicore\Name.pm \ 657 ..\lib\unicore\TestProp.pl 658 659# Directories of Unicode data files generated by mktables 660UNIDATADIR1 = ..\lib\unicore\To 661UNIDATADIR2 = ..\lib\unicore\lib 662 663PERLEXE_MANIFEST= .\perlexe.manifest 664PERLEXE_ICO = .\perlexe.ico 665PERLEXE_RES = .\perlexe.res 666PERLDLL_RES = 667 668# Nominate a target which causes extensions to be re-built 669# This used to be $(PERLEXE), but at worst it is the .dll that they depend 670# on and really only the interface - i.e. the .def file used to export symbols 671# from the .dll 672PERLDEP = perldll.def 673 674PL2BAT = bin\pl2bat.pl 675GLOBBAT = bin\perlglob.bat 676 677UTILS = \ 678 ..\utils\h2ph \ 679 ..\utils\splain \ 680 ..\utils\perlbug \ 681 ..\utils\pl2pm \ 682 ..\utils\c2ph \ 683 ..\utils\pstruct \ 684 ..\utils\h2xs \ 685 ..\utils\perldoc \ 686 ..\utils\perlivp \ 687 ..\utils\libnetcfg \ 688 ..\utils\enc2xs \ 689 ..\utils\encguess \ 690 ..\utils\piconv \ 691 ..\utils\corelist \ 692 ..\utils\cpan \ 693 ..\utils\xsubpp \ 694 ..\utils\prove \ 695 ..\utils\ptar \ 696 ..\utils\ptardiff \ 697 ..\utils\ptargrep \ 698 ..\utils\zipdetails \ 699 ..\utils\shasum \ 700 ..\utils\instmodsh \ 701 ..\utils\json_pp \ 702 ..\utils\pod2html \ 703 bin\exetype.pl \ 704 bin\runperl.pl \ 705 bin\pl2bat.pl \ 706 bin\perlglob.pl \ 707 bin\search.pl 708 709MAKE = nmake -nologo 710MAKE_BARE = nmake 711 712CFGSH_TMPL = config.vc 713CFGH_TMPL = config_H.vc 714 715XCOPY = xcopy /f /r /i /d /y 716RCOPY = xcopy /f /r /i /e /d /y 717NOOP = @rem 718NULL = 719 720DEL = del 721 722MICROCORE_SRC = \ 723 ..\av.c \ 724 ..\caretx.c \ 725 ..\deb.c \ 726 ..\doio.c \ 727 ..\doop.c \ 728 ..\dquote.c \ 729 ..\dump.c \ 730 ..\globals.c \ 731 ..\gv.c \ 732 ..\mro_core.c \ 733 ..\hv.c \ 734 ..\locale.c \ 735 ..\keywords.c \ 736 ..\mathoms.c \ 737 ..\mg.c \ 738 ..\numeric.c \ 739 ..\op.c \ 740 ..\pad.c \ 741 ..\perl.c \ 742 ..\perlapi.c \ 743 ..\perly.c \ 744 ..\pp.c \ 745 ..\pp_ctl.c \ 746 ..\pp_hot.c \ 747 ..\pp_pack.c \ 748 ..\pp_sort.c \ 749 ..\pp_sys.c \ 750 ..\reentr.c \ 751 ..\regcomp.c \ 752 ..\regexec.c \ 753 ..\run.c \ 754 ..\scope.c \ 755 ..\sv.c \ 756 ..\taint.c \ 757 ..\time64.c \ 758 ..\toke.c \ 759 ..\universal.c \ 760 ..\utf8.c \ 761 ..\util.c 762 763EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c 764 765!IF "$(PERL_MALLOC)" == "define" 766EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c 767!ENDIF 768 769EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c 770 771WIN32_SRC = \ 772 .\win32.c \ 773 .\win32io.c \ 774 .\win32sck.c \ 775 .\win32thread.c \ 776 .\fcrypt.c 777 778CORE_NOCFG_H = \ 779 ..\av.h \ 780 ..\cop.h \ 781 ..\cv.h \ 782 ..\dosish.h \ 783 ..\embed.h \ 784 ..\form.h \ 785 ..\gv.h \ 786 ..\handy.h \ 787 ..\hv.h \ 788 ..\hv_func.h \ 789 ..\iperlsys.h \ 790 ..\mg.h \ 791 ..\nostdio.h \ 792 ..\op.h \ 793 ..\opcode.h \ 794 ..\perl.h \ 795 ..\perlapi.h \ 796 ..\perlsdio.h \ 797 ..\perly.h \ 798 ..\pp.h \ 799 ..\proto.h \ 800 ..\regcomp.h \ 801 ..\regexp.h \ 802 ..\scope.h \ 803 ..\sv.h \ 804 ..\thread.h \ 805 ..\unixish.h \ 806 ..\utf8.h \ 807 ..\util.h \ 808 ..\warnings.h \ 809 ..\XSUB.h \ 810 ..\EXTERN.h \ 811 ..\perlvars.h \ 812 ..\intrpvar.h \ 813 .\include\dirent.h \ 814 .\include\netdb.h \ 815 .\include\sys\errno2.h \ 816 .\include\sys\socket.h \ 817 .\win32.h 818 819CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h 820 821UUDMAP_H = ..\uudmap.h 822BITCOUNT_H = ..\bitcount.h 823MG_DATA_H = ..\mg_data.h 824GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H) 825 826MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj) 827CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj) 828WIN32_OBJ = $(WIN32_SRC:.c=.obj) 829MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \ 830 $(MINIDIR)\miniperlmain$(o) \ 831 $(MINIDIR)\perlio$(o) 832MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\) 833MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) 834DLL_OBJ = $(DYNALOADER) 835GENUUDMAP_OBJ = $(GENUUDMAP:.exe=.obj) 836 837PERLDLL_OBJ = $(CORE_OBJ) 838PERLEXE_OBJ = perlmain$(o) 839PERLEXEST_OBJ = perlmainst$(o) 840 841PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ) 842 843!IF "$(USE_SETARGV)" != "" 844SETARGV_OBJ = setargv$(o) 845!ENDIF 846 847!IF "$(ALL_STATIC)" == "define" 848# some exclusions, unfortunately, until fixed: 849# - MakeMaker isn't capable enough for SDBM_File (small bug) 850STATIC_EXT = * !SDBM_File 851!ELSE 852# specify static extensions here, for example: 853# (be sure to include Win32CORE to load Win32 on demand) 854#STATIC_EXT = Win32CORE Cwd Compress/Raw/Zlib 855STATIC_EXT = Win32CORE 856!ENDIF 857 858DYNALOADER = ..\DynaLoader$(o) 859 860CFG_VARS = \ 861 "INST_TOP=$(INST_TOP)" \ 862 "INST_VER=$(INST_VER)" \ 863 "INST_ARCH=$(INST_ARCH)" \ 864 "archname=$(ARCHNAME)" \ 865 "cc=$(CC)" \ 866 "ld=$(LINK32)" \ 867 "ccflags=$(EXTRACFLAGS) $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \ 868 "usecplusplus=$(USE_CPLUSPLUS)" \ 869 "cf_email=$(EMAIL)" \ 870 "d_mymalloc=$(PERL_MALLOC)" \ 871 "libs=$(LIBFILES)" \ 872 "incpath=$(CCINCDIR:"=\")" \ 873 "libperl=$(PERLIMPLIB:..\=)" \ 874 "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \ 875 "libc=$(LIBC)" \ 876 "make=$(MAKE_BARE)" \ 877 "static_ext=$(STATIC_EXT)" \ 878 "usethreads=$(USE_ITHREADS)" \ 879 "useithreads=$(USE_ITHREADS)" \ 880 "usemultiplicity=$(USE_MULTI)" \ 881 "use64bitint=$(USE_64_BIT_INT)" \ 882 "uselongdouble=undef" \ 883 "uselargefiles=$(USE_LARGE_FILES)" \ 884 "usesitecustomize=$(USE_SITECUST)" \ 885 "LINK_FLAGS=$(LINK_FLAGS:"=\")" \ 886 "optimize=$(OPTIMIZE:"=\")" \ 887 "WIN64=$(WIN64)" 888 889# 890# Top targets 891# 892 893all : .\config.h ..\git_version.h $(GLOBEXE) $(CONFIGPM) \ 894 $(UNIDATAFILES) MakePPPort $(PERLEXE) Extensions_nonxs Extensions $(PERLSTATIC) 895 @echo Everything is up to date. '$(MAKE_BARE) test' to run test suite. 896 897regnodes : ..\regnodes.h 898 899..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h 900 901..\regexec$(o) : ..\regnodes.h ..\regcharclass.h 902 903reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(CONFIGPM) \ 904 $(UNIDATAFILES) $(PERLEXE) Extensions_reonly 905 @echo Perl and 're' are up to date. 906 907static: $(PERLEXESTATIC) 908 909#------------------------------------------------------------ 910 911$(GLOBEXE) : perlglob$(o) 912 $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ \ 913 perlglob$(o) setargv$(o) 914 $(EMBED_EXE_MANI) 915 916perlglob$(o) : perlglob.c 917 918# 919# Copy the template config.h and set configurables at the end of it 920# as per the options chosen and compiler used. 921# Note: This config.h is only used to build miniperl.exe anyway, but 922# it's as well to have its options correct to be sure that it builds 923# and so that it's "-V" options are correct for use by makedef.pl. The 924# real config.h used to build perl.exe is generated from the top-level 925# config_h.SH by config_h.PL (run by miniperl.exe). 926# 927.\config.h : $(CFGH_TMPL) 928 -del /f config.h 929 copy $(CFGH_TMPL) config.h 930 @echo.>>$@ 931 @echo #ifndef _config_h_footer_>>$@ 932 @echo #define _config_h_footer_>>$@ 933 @echo #undef Off_t>>$@ 934 @echo #undef LSEEKSIZE>>$@ 935 @echo #undef Off_t_size>>$@ 936 @echo #undef PTRSIZE>>$@ 937 @echo #undef SSize_t>>$@ 938 @echo #undef HAS_ATOLL>>$@ 939 @echo #undef HAS_STRTOLL>>$@ 940 @echo #undef HAS_STRTOULL>>$@ 941 @echo #undef IVTYPE>>$@ 942 @echo #undef UVTYPE>>$@ 943 @echo #undef IVSIZE>>$@ 944 @echo #undef UVSIZE>>$@ 945 @echo #undef NV_PRESERVES_UV>>$@ 946 @echo #undef NV_PRESERVES_UV_BITS>>$@ 947 @echo #undef IVdf>>$@ 948 @echo #undef UVuf>>$@ 949 @echo #undef UVof>>$@ 950 @echo #undef UVxf>>$@ 951 @echo #undef UVXf>>$@ 952 @echo #undef USE_64_BIT_INT>>$@ 953 @echo #undef Size_t_size>>$@ 954 @echo #undef USE_CPLUSPLUS>>$@ 955!IF "$(USE_LARGE_FILES)"=="define" 956 @echo #define Off_t __int64>>$@ 957 @echo #define LSEEKSIZE ^8>>$@ 958 @echo #define Off_t_size ^8>>$@ 959!ELSE 960 @echo #define Off_t long>>$@ 961 @echo #define LSEEKSIZE ^4>>$@ 962 @echo #define Off_t_size ^4>>$@ 963!ENDIF 964!IF "$(WIN64)"=="define" 965 @echo #define PTRSIZE ^8>>$@ 966 @echo #define SSize_t __int64>>$@ 967 @echo #define HAS_ATOLL>>$@ 968 @echo #define HAS_STRTOLL>>$@ 969 @echo #define HAS_STRTOULL>>$@ 970 @echo #define Size_t_size ^8>>$@ 971!ELSE 972 @echo #define PTRSIZE ^4>>$@ 973 @echo #define SSize_t int>>$@ 974 @echo #undef HAS_ATOLL>>$@ 975 @echo #undef HAS_STRTOLL>>$@ 976 @echo #undef HAS_STRTOULL>>$@ 977 @echo #define Size_t_size ^4>>$@ 978!ENDIF 979!IF "$(USE_64_BIT_INT)"=="define" 980 @echo #define IVTYPE __int64>>$@ 981 @echo #define UVTYPE unsigned __int64>>$@ 982 @echo #define IVSIZE ^8>>$@ 983 @echo #define UVSIZE ^8>>$@ 984 @echo #undef NV_PRESERVES_UV>>$@ 985 @echo #define NV_PRESERVES_UV_BITS 53>>$@ 986 @echo #define IVdf "I64d">>$@ 987 @echo #define UVuf "I64u">>$@ 988 @echo #define UVof "I64o">>$@ 989 @echo #define UVxf "I64x">>$@ 990 @echo #define UVXf "I64X">>$@ 991 @echo #define USE_64_BIT_INT>>$@ 992!ELSE 993 @echo #define IVTYPE long>>$@ 994 @echo #define UVTYPE unsigned long>>$@ 995 @echo #define IVSIZE ^4>>$@ 996 @echo #define UVSIZE ^4>>$@ 997 @echo #define NV_PRESERVES_UV>>$@ 998 @echo #define NV_PRESERVES_UV_BITS 32>>$@ 999 @echo #define IVdf "ld">>$@ 1000 @echo #define UVuf "lu">>$@ 1001 @echo #define UVof "lo">>$@ 1002 @echo #define UVxf "lx">>$@ 1003 @echo #define UVXf "lX">>$@ 1004 @echo #undef USE_64_BIT_INT>>$@ 1005!ENDIF 1006!IF "$(USE_CPLUSPLUS)"=="define" 1007 @echo #define USE_CPLUSPLUS>>$@ 1008!ELSE 1009 @echo #undef USE_CPLUSPLUS>>$@ 1010!ENDIF 1011 @echo #endif>>$@ 1012 1013..\git_version.h : $(MINIPERL) ..\make_patchnum.pl 1014 cd .. && miniperl -Ilib make_patchnum.pl && cd win32 1015 1016# make sure that we recompile perl.c if the git version changes 1017..\perl$(o) : ..\git_version.h 1018 1019..\config.sh : $(CFGSH_TMPL) config_sh.PL FindExt.pm $(MINIPERL) 1020 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh 1021 1022# This target is for when changes to the main config.sh happen. 1023# Edit config.vc, then make perl in a minimal configuration (i.e. with MULTI, 1024# ITHREADS, IMP_SYS and LARGE_FILES off), then make this target 1025# to regenerate config_H.vc. 1026regen_config_h: 1027 $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh 1028 $(MINIPERL) -I..\lib ..\configpm --chdir=.. 1029 -del /f $(CFGH_TMPL) 1030 -$(MINIPERL) -I..\lib config_h.PL 1031 rename config.h $(CFGH_TMPL) 1032 1033$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL 1034 $(MINIPERL) -I..\lib ..\configpm --chdir=.. 1035 $(XCOPY) ..\*.h $(COREDIR)\*.* 1036 $(XCOPY) *.h $(COREDIR)\*.* 1037 $(RCOPY) include $(COREDIR)\*.* 1038 -$(MINIPERL) -I..\lib config_h.PL 1039 if errorlevel 1 $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) 1040 1041# See the comment in Makefile.SH explaining this seemingly cranky ordering 1042$(MINIPERL) : ..\lib\buildcustomize.pl 1043 1044..\lib\buildcustomize.pl : $(MINIDIR) $(MINI_OBJ) ..\write_buildcustomize.pl 1045 $(LINK32) -out:$(MINIPERL) @<< 1046 $(BLINK_FLAGS) $(DELAYLOAD) $(MINIDELAYLOAD) $(LIBFILES) $(MINI_OBJ) 1047<< 1048 $(EMBED_EXE_MANI:..\lib\buildcustomize.pl=..\miniperl.exe) 1049 $(MINIPERL) -I..\lib -f ..\write_buildcustomize.pl .. 1050 1051$(MINIDIR) : 1052 if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" 1053 1054$(MINICORE_OBJ) : $(CORE_NOCFG_H) 1055 $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*F).c 1056 1057$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) 1058 $(CC) -c $(CFLAGS) -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ $(*F).c 1059 1060# -DPERL_IMPLICIT_SYS needs C++ for perllib.c 1061# This is the only file that depends on perlhost.h, vmem.h, and vdir.h 1062!IF "$(USE_IMP_SYS)" == "define" 1063perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h 1064 $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c 1065!ENDIF 1066 1067# 1. we don't want to rebuild miniperl.exe when config.h changes 1068# 2. we don't want to rebuild miniperl.exe with non-default config.h 1069# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it 1070$(MINI_OBJ) : $(CORE_NOCFG_H) 1071 1072$(WIN32_OBJ) : $(CORE_H) 1073$(CORE_OBJ) : $(CORE_H) 1074$(DLL_OBJ) : $(CORE_H) 1075 1076perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl 1077 $(MINIPERL) -I..\lib create_perllibst_h.pl 1078 $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ 1079 CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def 1080 1081$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static 1082 $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @Extensions_static @<< 1083 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) 1084<< 1085 $(EMBED_DLL_MANI) 1086 $(XCOPY) $(PERLIMPLIB) $(COREDIR) 1087 1088$(PERLSTATICLIB): Extensions_static 1089 $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static @<< 1090 $(PERLDLL_OBJ) 1091<< 1092 $(XCOPY) $(PERLSTATICLIB) $(COREDIR) 1093 1094$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO) 1095 1096$(MINIDIR)\globals$(o) : $(GENERATED_HEADERS) 1097 1098$(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H) 1099 1100$(BITCOUNT_H) : $(GENUUDMAP) 1101 $(GENUUDMAP) $(GENERATED_HEADERS) 1102 1103$(GENUUDMAP_OBJ) : ..\mg_raw.h 1104 1105$(GENUUDMAP) : $(GENUUDMAP_OBJ) 1106 $(LINK32) -out:$@ @<< 1107 $(BLINK_FLAGS) $(LIBFILES) $(GENUUDMAP_OBJ) 1108<< 1109 $(EMBED_EXE_MANI) 1110 1111perlmain.c : runperl.c 1112 copy runperl.c perlmain.c 1113 1114perlmain$(o) : perlmain.c 1115 $(CC) $(CFLAGS_O:-DPERLDLL=-UPERLDLL) $(OBJOUT_FLAG)$@ -c perlmain.c 1116 1117perlmainst.c : runperl.c 1118 copy runperl.c perlmainst.c 1119 1120perlmainst$(o) : perlmainst.c 1121 $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c 1122 1123$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) 1124 $(LINK32) -out:$@ $(BLINK_FLAGS) \ 1125 $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) $(SETARGV_OBJ) 1126 $(EMBED_EXE_MANI) 1127 copy $(PERLEXE) $(WPERLEXE) 1128 $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS 1129 1130$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES) 1131 $(LINK32) -out:$@ $(BLINK_FLAGS) \ 1132 $(PERLEXEST_OBJ) $(PERLEXE_RES) $(PERLSTATICLIB) $(LIBFILES) $(SETARGV_OBJ) 1133 $(EMBED_EXE_MANI) 1134 1135MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs 1136 $(MINIPERL) -I..\lib ..\mkppport 1137 1138#------------------------------------------------------------------------------- 1139# There's no direct way to mark a dependency on 1140# DynaLoader.pm, so this will have to do 1141Extensions: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER) 1142 $(XCOPY) ..\*.h $(COREDIR)\*.* 1143 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic 1144 1145Extensions_reonly: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER) 1146 $(XCOPY) ..\*.h $(COREDIR)\*.* 1147 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re 1148 1149Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs 1150 $(XCOPY) ..\*.h $(COREDIR)\*.* 1151 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static 1152 $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static 1153 1154Extensions_nonxs: ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) ..\pod\perlfunc.pod 1155 $(XCOPY) ..\*.h $(COREDIR)\*.* 1156 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs 1157 1158$(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs 1159 $(XCOPY) ..\*.h $(COREDIR)\*.* 1160 $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader 1161 1162Extensions_clean: 1163 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean 1164 1165Extensions_realclean: 1166 -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean 1167 1168#------------------------------------------------------------------------------- 1169 1170doc: $(PERLEXE) ..\pod\perltoc.pod 1171 $(PERLEXE) ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \ 1172 --podpath=pod:lib:utils --htmlroot="file://$(INST_HTML::=|)" \ 1173 --recurse 1174 1175..\utils\Makefile: $(CONFIGPM) ..\utils\Makefile.PL 1176 $(MINIPERL) -I..\lib ..\utils\Makefile.PL .. 1177 1178# Note that this next section is parsed (and regenerated) by pod/buildtoc 1179# so please check that script before making structural changes here 1180 1181utils: $(PERLEXE) ..\utils\Makefile 1182 cd ..\utils 1183 $(MAKE) PERL=$(MINIPERL) 1184 cd ..\pod 1185 copy ..\README.aix ..\pod\perlaix.pod 1186 copy ..\README.amiga ..\pod\perlamiga.pod 1187 copy ..\README.android ..\pod\perlandroid.pod 1188 copy ..\README.bs2000 ..\pod\perlbs2000.pod 1189 copy ..\README.ce ..\pod\perlce.pod 1190 copy ..\README.cn ..\pod\perlcn.pod 1191 copy ..\README.cygwin ..\pod\perlcygwin.pod 1192 copy ..\README.dos ..\pod\perldos.pod 1193 copy ..\README.freebsd ..\pod\perlfreebsd.pod 1194 copy ..\README.haiku ..\pod\perlhaiku.pod 1195 copy ..\README.hpux ..\pod\perlhpux.pod 1196 copy ..\README.hurd ..\pod\perlhurd.pod 1197 copy ..\README.irix ..\pod\perlirix.pod 1198 copy ..\README.jp ..\pod\perljp.pod 1199 copy ..\README.ko ..\pod\perlko.pod 1200 copy ..\README.linux ..\pod\perllinux.pod 1201 copy ..\README.macos ..\pod\perlmacos.pod 1202 copy ..\README.macosx ..\pod\perlmacosx.pod 1203 copy ..\README.netware ..\pod\perlnetware.pod 1204 copy ..\README.openbsd ..\pod\perlopenbsd.pod 1205 copy ..\README.os2 ..\pod\perlos2.pod 1206 copy ..\README.os390 ..\pod\perlos390.pod 1207 copy ..\README.os400 ..\pod\perlos400.pod 1208 copy ..\README.plan9 ..\pod\perlplan9.pod 1209 copy ..\README.qnx ..\pod\perlqnx.pod 1210 copy ..\README.riscos ..\pod\perlriscos.pod 1211 copy ..\README.solaris ..\pod\perlsolaris.pod 1212 copy ..\README.symbian ..\pod\perlsymbian.pod 1213 copy ..\README.synology ..\pod\perlsynology.pod 1214 copy ..\README.tru64 ..\pod\perltru64.pod 1215 copy ..\README.tw ..\pod\perltw.pod 1216 copy ..\README.vos ..\pod\perlvos.pod 1217 copy ..\README.win32 ..\pod\perlwin32.pod 1218 copy ..\pod\perldelta.pod ..\pod\perl5242delta.pod 1219 cd ..\win32 1220 $(PERLEXE) $(PL2BAT) $(UTILS) 1221 $(MINIPERL) -I..\lib ..\autodoc.pl .. 1222 $(MINIPERL) -I..\lib ..\pod\perlmodlib.PL -q .. 1223 1224..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs 1225 $(PERLEXE) -f ..\pod\buildtoc -q 1226 1227# Note that the pod cleanup in this next section is parsed (and regenerated 1228# by pod/buildtoc so please check that script before making changes here 1229 1230distclean: realclean 1231 -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ 1232 $(PERLIMPLIB) ..\miniperl.lib $(PERLEXESTATIC) $(PERLSTATICLIB) 1233 -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm 1234 -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm 1235 -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm 1236 -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm 1237 -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm 1238 -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm 1239 -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm 1240 -del /f $(LIBDIR)\File\Glob.pm 1241 -del /f $(LIBDIR)\Storable.pm 1242 -del /f $(LIBDIR)\Sys\Hostname.pm 1243 -del /f $(LIBDIR)\Time\HiRes.pm 1244 -del /f $(LIBDIR)\Unicode\Normalize.pm 1245 -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm 1246 -del /f $(LIBDIR)\Win32.pm 1247 -del /f $(LIBDIR)\Win32CORE.pm 1248 -del /f $(LIBDIR)\Win32API\File.pm 1249 -del /f $(LIBDIR)\Win32API\File\cFile.pc 1250 -del /f $(LIBDIR)\buildcustomize.pl 1251 -del /f $(DISTDIR)\XSLoader\XSLoader.pm 1252 -del /f *.def *.map 1253 -if exist $(LIBDIR)\Amiga rmdir /s /q $(LIBDIR)\Amiga 1254 -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App 1255 -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive 1256 -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute 1257 -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie 1258 -if exist $(LIBDIR)\Carp rmdir /s /q $(LIBDIR)\Carp 1259 -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress 1260 -if exist $(LIBDIR)\Config\Perl rmdir /s /q $(LIBDIR)\Config\Perl 1261 -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN 1262 -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data 1263 -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel 1264 -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest 1265 -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode 1266 -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding 1267 -if exist $(LIBDIR)\Exporter rmdir /s /q $(LIBDIR)\Exporter 1268 -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder 1269 -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command 1270 -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant 1271 -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist 1272 -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker 1273 -if exist $(LIBDIR)\ExtUtils\ParseXS rmdir /s /q $(LIBDIR)\ExtUtils\ParseXS 1274 -if exist $(LIBDIR)\ExtUtils\Typemaps rmdir /s /q $(LIBDIR)\ExtUtils\Typemaps 1275 -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec 1276 -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter 1277 -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash 1278 -if exist $(LIBDIR)\HTTP rmdir /s /q $(LIBDIR)\HTTP 1279 -if exist $(LIBDIR)\I18N rmdir /s /q $(LIBDIR)\I18N 1280 -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc 1281 -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO 1282 -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC 1283 -if exist $(LIBDIR)\JSON rmdir /s /q $(LIBDIR)\JSON 1284 -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List 1285 -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale 1286 -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math 1287 -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize 1288 -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME 1289 -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module 1290 -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP 1291 -if exist $(LIBDIR)\OpenBSD rmdir /s /q $(LIBDIR)\OpenBSD 1292 -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params 1293 -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse 1294 -if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl 1295 -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO 1296 -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc 1297 -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple 1298 -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text 1299 -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar 1300 -if exist $(LIBDIR)\Search rmdir /s /q $(LIBDIR)\Search 1301 -if exist $(LIBDIR)\Sub rmdir /s /q $(LIBDIR)\Sub 1302 -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys 1303 -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP 1304 -if exist $(LIBDIR)\Term rmdir /s /q $(LIBDIR)\Term 1305 -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test 1306 -if exist $(LIBDIR)\Text rmdir /s /q $(LIBDIR)\Text 1307 -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread 1308 -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads 1309 -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash 1310 -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate 1311 -if exist $(LIBDIR)\Unicode\Collate\Locale rmdir /s /q $(LIBDIR)\Unicode\Collate\Locale 1312 -if exist $(LIBDIR)\version rmdir /s /q $(LIBDIR)\version 1313 -if exist $(LIBDIR)\VMS rmdir /s /q $(LIBDIR)\VMS 1314 -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API 1315 -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS 1316 -cd $(PODDIR) && del /f *.html *.bat roffitall \ 1317 perl5242delta.pod perlaix.pod perlamiga.pod perlandroid.pod \ 1318 perlapi.pod perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \ 1319 perldos.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \ 1320 perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \ 1321 perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \ 1322 perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \ 1323 perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \ 1324 perlsolaris.pod perlsymbian.pod perlsynology.pod perltoc.pod \ 1325 perltru64.pod perltw.pod perlvos.pod perlwin32.pod 1326 -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \ 1327 perldoc perlivp libnetcfg enc2xs encguess piconv cpan *.bat \ 1328 xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep shasum corelist zipdetails 1329 -del /f ..\config.sh perlmain.c dlutils.c config.h.new \ 1330 perlmainst.c 1331 -del /f $(CONFIGPM) 1332 -del /f ..\lib\Config_git.pl 1333 -del /f bin\*.bat 1334 -del /f perllibst.h 1335 -del /f $(PERLEXE_RES) perl.base 1336 -cd .. && del /s *.lib *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib ppport.h 1337 -cd $(EXTDIR) && del /s *.def Makefile Makefile.old 1338 -cd $(DISTDIR) && del /s *.def Makefile Makefile.old 1339 -cd $(CPANDIR) && del /s *.def Makefile Makefile.old 1340 -del /s ..\utils\Makefile 1341 -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) 1342 -if exist $(COREDIR) rmdir /s /q $(COREDIR) 1343 -if exist pod2htmd.tmp del pod2htmd.tmp 1344 -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR) 1345 -del /f ..\t\test_state 1346 1347install : all installbare installhtml 1348 1349installbare : utils ..\pod\perltoc.pod 1350 $(PERLEXE) ..\installperl 1351 if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* 1352 if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.* 1353 $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* 1354 if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.* 1355 $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* 1356 1357installhtml : doc 1358 $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.* 1359 1360inst_lib : $(CONFIGPM) 1361 $(RCOPY) ..\lib $(INST_LIB)\*.* 1362 1363$(UNIDATAFILES) ..\pod\perluniprops.pod : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs 1364 cd ..\lib\unicore && \ 1365 ..\$(MINIPERL) -I.. mktables -P ..\..\pod -maketest -makelist -p -check $@ $(FIRSTUNIFILE) 1366 1367minitest : .\config.h $(MINIPERL) ..\git_version.h $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) 1368 $(XCOPY) $(MINIPERL) ..\t\$(NULL) 1369 if exist ..\t\perl.exe del /f ..\t\perl.exe 1370 rename ..\t\miniperl.exe perl.exe 1371 $(XCOPY) $(GLOBEXE) ..\t\$(NULL) 1372# Note this perl.exe is miniperl 1373 cd ..\t && perl.exe TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t opbasic/*.t op/*.t uni/*.t perf/*.t pragma/*.t 1374 1375test-prep : all utils ../pod/perltoc.pod 1376 $(XCOPY) $(PERLEXE) ..\t\$(NULL) 1377 $(XCOPY) $(PERLDLL) ..\t\$(NULL) 1378 $(XCOPY) $(GLOBEXE) ..\t\$(NULL) 1379 set PERL_STATIC_EXT=$(STATIC_EXT) 1380 1381test : test-prep 1382 cd ..\t 1383 perl.exe harness $(TEST_SWITCHES) $(TEST_FILES) 1384 cd ..\win32 1385 1386test_porting : test-prep 1387 cd ..\t 1388 perl.exe harness $(TEST_SWITCHES) porting\*.t ..\lib\diagnostics.t 1389 cd ..\win32 1390 1391test-reonly : reonly utils 1392 $(XCOPY) $(PERLEXE) ..\t\$(NULL) 1393 $(XCOPY) $(PERLDLL) ..\t\$(NULL) 1394 $(XCOPY) $(GLOBEXE) ..\t\$(NULL) 1395 cd ..\t 1396 perl.exe harness $(OPT) -re \bre\\/ $(EXTRA) 1397 cd ..\win32 1398 1399regen : 1400 cd .. 1401 regen.pl 1402 cd win32 1403 1404test-notty : test-prep 1405 set PERL_SKIP_TTY_TEST=1 1406 cd ..\t 1407 perl.exe harness $(TEST_SWITCHES) $(TEST_FILES) 1408 cd ..\win32 1409 1410_test : 1411 $(XCOPY) $(PERLEXE) ..\t\$(NULL) 1412 $(XCOPY) $(PERLDLL) ..\t\$(NULL) 1413 $(XCOPY) $(GLOBEXE) ..\t\$(NULL) 1414 cd ..\t 1415 perl.exe harness $(TEST_SWITCHES) $(TEST_FILES) 1416 cd ..\win32 1417 1418_clean : 1419 -@$(DEL) miniperlmain$(o) 1420 -@$(DEL) $(MINIPERL) 1421 -@$(DEL) perlglob$(o) 1422 -@$(DEL) perlmain$(o) 1423 -@$(DEL) perlmainst$(o) 1424 -@$(DEL) config.h 1425 -@$(DEL) ..\git_version.h 1426 -@$(DEL) $(GLOBEXE) 1427 -@$(DEL) $(PERLEXE) 1428 -@$(DEL) $(WPERLEXE) 1429 -@$(DEL) $(PERLEXESTATIC) 1430 -@$(DEL) $(PERLSTATICLIB) 1431 -@$(DEL) $(PERLDLL) 1432 -@$(DEL) $(CORE_OBJ) 1433 -@$(DEL) $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS) 1434 -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) 1435 -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1) 1436 -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2) 1437 -@$(DEL) $(UNIDATAFILES) 1438 -@$(DEL) $(WIN32_OBJ) 1439 -@$(DEL) $(DLL_OBJ) 1440 -@$(DEL) ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res 1441 -@$(DEL) ..\t\*.exe ..\t\*.dll ..\t\*.bat 1442 -@$(DEL) *.ilk 1443 -@$(DEL) *.pdb 1444 -@$(DEL) Extensions_static 1445 1446clean : Extensions_clean _clean 1447 1448realclean : Extensions_realclean _clean 1449 1450# Handy way to run perlbug -ok without having to install and run the 1451# installed perlbug. We don't re-run the tests here - we trust the user. 1452# Please *don't* use this unless all tests pass. 1453# If you want to report test failures, use "nmake nok" instead. 1454ok: utils 1455 $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" 1456 1457okfile: utils 1458 $(PERLEXE) ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok 1459 1460nok: utils 1461 $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" 1462 1463nokfile: utils 1464 $(PERLEXE) ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok 1465