1#
2# Unusual variables checked by this code:
3#	NOP - four byte opcode for no-op (defaults to 0)
4#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
5#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
6#		(e.g., .PARISC.global)
7#	OTHER_SECTIONS - at the end
8#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
9#		executable (e.g., _DYNAMIC_LINK)
10#	TEXT_START_SYMBOLS - symbols that appear at the start of the
11#		.text section.
12#	DATA_START_SYMBOLS - symbols that appear at the start of the
13#		.data section.
14#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
15#		.bss section besides __bss_start.
16#	EMBEDDED - whether this is for an embedded system. 
17#
18# When adding sections, do note that the names of some sections are used
19# when specifying the start address of the next.
20#
21test -z "$ENTRY" && ENTRY=_start
22test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
23test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
24if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
25test "$LD_FLAG" = "N" && DATA_ADDR=.
26
27CTOR=".ctors ${CONSTRUCTING-0} : 
28  {
29    ${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
30    ${CONSTRUCTING+${CTOR_START}}
31    KEEP (*(.ctors))
32
33    ${CONSTRUCTING+${CTOR_END}}
34    ${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
35  } ${RELOCATING+ > ${TEXT_MEMORY}}"
36
37DTOR="  .dtors	${CONSTRUCTING-0} :
38  {
39    ${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
40    KEEP (*(.dtors))
41    ${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
42  } ${RELOCATING+ > ${TEXT_MEMORY}}"
43
44
45VECTORS="
46  /* If the 'vectors_addr' symbol is defined, it indicates the start address
47     of interrupt vectors.  This depends on the 68HC11 operating mode:
48
49			Addr
50     Single chip	0xffc0
51     Extended mode	0xffc0
52     Bootstrap		0x00c0
53     Test		0xbfc0
54
55     In general, the vectors address is 0xffc0.  This can be overriden 
56     with the '-defsym vectors_addr=0xbfc0' ld option.
57
58     Note: for the bootstrap mode, the interrupt vectors are at 0xbfc0 but
59     they are redirected to 0x00c0 by the internal PROM.  Application's vectors
60     must also consist of jump instructions (see Motorola's manual).  */
61
62  PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xffc0);
63  .vectors DEFINED (vectors_addr) ? vectors_addr : 0xffc0 :
64  {
65    KEEP (*(.vectors))
66  }"
67
68#
69# We provide two emulations: a fixed on that defines some memory banks
70# and a configurable one that includes a user provided memory definition.
71#
72case $GENERIC_BOARD in
73  yes|1|YES)
74	MEMORY_DEF="
75/* Get memory banks definition from some user configuration file.
76   This file must be located in some linker directory (search path
77   with -L<dir>). See fixed memory banks emulation script.  */
78INCLUDE memory.x;
79"
80	;;
81  *)
82MEMORY_DEF="
83/* Fixed definition of the available memory banks.
84   See generic emulation script for a user defined configuration.  */
85MEMORY
86{
87  page0 (rwx) : ORIGIN = 0x0, LENGTH = 256
88  text  (rx)  : ORIGIN = ${ROM_START_ADDR}, LENGTH = ${ROM_SIZE}
89  data        : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
90  eeprom      : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
91}
92
93/* Setup the stack on the top of the data memory bank.  */
94PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
95"
96	;;
97esac
98
99STARTUP_CODE="
100    /* Startup code.  */
101    KEEP (*(.install0))	/* Section should setup the stack pointer.  */
102    KEEP (*(.install1))	/* Place holder for applications.  */
103    KEEP (*(.install2))	/* Optional installation of data sections in RAM.  */
104    KEEP (*(.install3))	/* Place holder for applications.  */
105    KEEP (*(.install4))	/* Section that calls the main.  */
106"
107
108FINISH_CODE="
109    /* Finish code.  */
110    KEEP (*(.fini0))	/* Beginning of finish code (_exit symbol).  */
111    KEEP (*(.fini1))	/* Place holder for applications.  */
112    KEEP (*(.fini2))	/* C++ destructors.  */
113    KEEP (*(.fini3))	/* Place holder for applications.  */
114    KEEP (*(.fini4))	/* Runtime exit.  */
115"
116
117PRE_COMPUTE_DATA_SIZE="
118/* SCz: this does not work yet... This is supposed to force the loading
119   of _map_data.o (from libgcc.a) when the .data section is not empty.
120   By doing so, this should bring the code that copies the .data section
121   from ROM to RAM at init time.
122
123  ___pre_comp_data_size = SIZEOF(.data);
124  __install_data_sections = ___pre_comp_data_size > 0 ?
125		__map_data_sections : 0;
126*/
127"
128
129INSTALL_RELOC="
130  .install0 0 : { *(.install0) }
131  .install1 0 : { *(.install1) }
132  .install2 0 : { *(.install2) }
133  .install3 0 : { *(.install3) }
134  .install4 0 : { *(.install4) }
135"
136
137FINISH_RELOC="
138  .fini0 0 : { *(.fini0) }
139  .fini1 0 : { *(.fini1) }
140  .fini2 0 : { *(.fini2) }
141  .fini3 0 : { *(.fini3) }
142  .fini4 0 : { *(.fini4) }
143"
144
145BSS_DATA_RELOC="
146  .data1 0 : { *(.data1) }
147
148  /* We want the small data sections together, so single-instruction offsets
149     can access them all, and initialized data all before uninitialized, so
150     we can shorten the on-disk segment size.  */
151  .sdata   0 : { *(.sdata) }
152  .sbss    0 : { *(.sbss) }
153  .scommon 0 : { *(.scommon) }
154"
155
156SOFT_REGS_RELOC="
157  .softregs 0 : { *(.softregs) }
158"
159
160cat <<EOF
161${RELOCATING+/* Linker script for 68HC11 executable (PROM).  */}
162${RELOCATING-/* Linker script for 68HC11 object file (ld -r).  */}
163
164OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
165	      "${LITTLE_OUTPUT_FORMAT}")
166OUTPUT_ARCH(${OUTPUT_ARCH})
167ENTRY(${ENTRY})
168
169${RELOCATING+${LIB_SEARCH_DIRS}}
170${RELOCATING+${EXECUTABLE_SYMBOLS}}
171${RELOCATING+${MEMORY_DEF}}
172
173SECTIONS
174{
175  .hash        ${RELOCATING-0} : { *(.hash)		}
176  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
177  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
178  .gnu.version		${RELOCATING-0} : { *(.gnu.version) }
179  .gnu.version_d	${RELOCATING-0} : { *(.gnu.version_d) }
180  .gnu.version_r	${RELOCATING-0} : { *(.gnu.version_r) }
181
182  .rel.text    ${RELOCATING-0} :
183    {
184      *(.rel.text)
185      ${RELOCATING+*(.rel.text.*)}
186      ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
187    }
188  .rela.text   ${RELOCATING-0} :
189    {
190      *(.rela.text)
191      ${RELOCATING+*(.rela.text.*)}
192      ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
193    }
194  .rel.data    ${RELOCATING-0} :
195    {
196      *(.rel.data)
197      ${RELOCATING+*(.rel.data.*)}
198      ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
199    }
200  .rela.data   ${RELOCATING-0} :
201    {
202      *(.rela.data)
203      ${RELOCATING+*(.rela.data.*)}
204      ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
205    }
206  .rel.rodata  ${RELOCATING-0} :
207    {
208      *(.rel.rodata)
209      ${RELOCATING+*(.rel.rodata.*)}
210      ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
211    }
212  .rela.rodata ${RELOCATING-0} :
213    {
214      *(.rela.rodata)
215      ${RELOCATING+*(.rela.rodata.*)}
216      ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
217    }
218  .rel.sdata   ${RELOCATING-0} :
219    {
220      *(.rel.sdata)
221      ${RELOCATING+*(.rel.sdata.*)}
222      ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
223    }
224  .rela.sdata   ${RELOCATING-0} :
225    {
226      *(.rela.sdata)
227      ${RELOCATING+*(.rela.sdata.*)}
228      ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
229    }
230  .rel.sbss    ${RELOCATING-0} :
231    { 
232      *(.rel.sbss)
233      ${RELOCATING+*(.rel.sbss.*)}
234      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
235    }
236  .rela.sbss   ${RELOCATING-0} :
237    {
238      *(.rela.sbss)
239      ${RELOCATING+*(.rela.sbss.*)}
240      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
241    }
242  .rel.bss     ${RELOCATING-0} : 
243    { 
244      *(.rel.bss)
245      ${RELOCATING+*(.rel.bss.*)}
246      ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
247    }
248  .rela.bss    ${RELOCATING-0} : 
249    { 
250      *(.rela.bss)
251      ${RELOCATING+*(.rela.bss.*)}
252      ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
253    }
254  .rel.stext		${RELOCATING-0} : { *(.rel.stest) }
255  .rela.stext		${RELOCATING-0} : { *(.rela.stest) }
256  .rel.etext		${RELOCATING-0} : { *(.rel.etest) }
257  .rela.etext		${RELOCATING-0} : { *(.rela.etest) }
258  .rel.sdata		${RELOCATING-0} : { *(.rel.sdata) }
259  .rela.sdata		${RELOCATING-0} : { *(.rela.sdata) }
260  .rel.edata		${RELOCATING-0} : { *(.rel.edata) }
261  .rela.edata		${RELOCATING-0} : { *(.rela.edata) }
262  .rel.eit_v		${RELOCATING-0} : { *(.rel.eit_v) }
263  .rela.eit_v		${RELOCATING-0} : { *(.rela.eit_v) }
264  .rel.ebss		${RELOCATING-0} : { *(.rel.ebss) }
265  .rela.ebss		${RELOCATING-0} : { *(.rela.ebss) }
266  .rel.srodata		${RELOCATING-0} : { *(.rel.srodata) }
267  .rela.srodata		${RELOCATING-0} : { *(.rela.srodata) }
268  .rel.erodata		${RELOCATING-0} : { *(.rel.erodata) }
269  .rela.erodata		${RELOCATING-0} : { *(.rela.erodata) }
270  .rel.got		${RELOCATING-0} : { *(.rel.got) }
271  .rela.got		${RELOCATING-0} : { *(.rela.got) }
272  .rel.ctors		${RELOCATING-0} : { *(.rel.ctors) }
273  .rela.ctors		${RELOCATING-0} : { *(.rela.ctors) }
274  .rel.dtors		${RELOCATING-0} : { *(.rel.dtors) }
275  .rela.dtors		${RELOCATING-0} : { *(.rela.dtors) }
276  .rel.init		${RELOCATING-0} : { *(.rel.init) }
277  .rela.init		${RELOCATING-0} : { *(.rela.init) }
278  .rel.fini		${RELOCATING-0} : { *(.rel.fini) }
279  .rela.fini		${RELOCATING-0} : { *(.rela.fini) }
280  .rel.plt		${RELOCATING-0} : { *(.rel.plt) }
281  .rela.plt		${RELOCATING-0} : { *(.rela.plt) }
282
283  /* Concatenate .page0 sections.  Put them in the page0 memory bank
284     unless we are creating a relocatable file.  */
285  .page0 :
286  {
287    *(.page0)
288    ${RELOCATING+*(.softregs)}
289  } ${RELOCATING+ > page0}
290
291  /* Start of text section.  */
292  .stext ${RELOCATING-0} : 
293  {
294    *(.stext)
295  } ${RELOCATING+ > ${TEXT_MEMORY}}
296
297  .init	${RELOCATING-0} :
298  {
299    *(.init) 
300  } ${RELOCATING+=${NOP-0}}
301
302  ${RELOCATING-${INSTALL_RELOC}}
303  ${RELOCATING-${FINISH_RELOC}}
304
305  .text ${RELOCATING-0}:
306  {
307    /* Put startup code at beginning so that _start keeps same address.  */
308    ${RELOCATING+${STARTUP_CODE}}
309
310    ${RELOCATING+*(.init)}
311    *(.text)
312    ${RELOCATING+*(.text.*)}
313    /* .gnu.warning sections are handled specially by elf32.em.  */
314    *(.gnu.warning)
315    ${RELOCATING+*(.gnu.linkonce.t.*)}
316    ${RELOCATING+*(.tramp)}
317    ${RELOCATING+*(.tramp.*)}
318
319    ${RELOCATING+${FINISH_CODE}}
320
321    ${RELOCATING+_etext = .;}
322    ${RELOCATING+PROVIDE (etext = .);}
323
324  } ${RELOCATING+ > ${TEXT_MEMORY}}
325
326  .eh_frame ${RELOCATING-0} :
327  {
328    KEEP (*(.eh_frame))
329  } ${RELOCATING+ > ${TEXT_MEMORY}}
330
331  .gcc_except_table ${RELOCATING-0} :
332  {
333    *(.gcc_except_table)
334  } ${RELOCATING+ > ${TEXT_MEMORY}}
335
336  .rodata  ${RELOCATING-0} :
337  {
338    *(.rodata)
339    ${RELOCATING+*(.rodata.*)}
340    ${RELOCATING+*(.gnu.linkonce.r*)}
341  } ${RELOCATING+ > ${TEXT_MEMORY}}
342
343  .rodata1 ${RELOCATING-0} :
344  {
345    *(.rodata1)
346  } ${RELOCATING+ > ${TEXT_MEMORY}}
347
348  /* Constructor and destructor tables are in ROM.  */
349  ${RELOCATING+${CTOR}}
350  ${RELOCATING+${DTOR}}
351
352  .jcr ${RELOCATING-0} :
353  {
354    KEEP (*(.jcr))
355  } ${RELOCATING+ > ${TEXT_MEMORY}}
356
357  /* Start of the data section image in ROM.  */
358  ${RELOCATING+__data_image = .;}
359  ${RELOCATING+PROVIDE (__data_image = .);}
360
361  /* All read-only sections that normally go in PROM must be above.
362     We construct the DATA image section in PROM at end of all these
363     read-only sections.  The data image must be copied at init time.
364     Refer to GNU ld, Section 3.6.8.2 Output Section LMA.  */
365  .data  ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
366  {
367    ${RELOCATING+__data_section_start = .;}
368    ${RELOCATING+PROVIDE (__data_section_start = .);}
369
370    ${RELOCATING+${DATA_START_SYMBOLS}}
371    ${RELOCATING+*(.sdata)}
372    *(.data)
373    ${RELOCATING+*(.data.*)}
374    ${RELOCATING+*(.data1)}
375    ${RELOCATING+*(.gnu.linkonce.d.*)}
376    ${CONSTRUCTING+CONSTRUCTORS}
377
378    ${RELOCATING+_edata  =  .;}
379    ${RELOCATING+PROVIDE (edata = .);}
380  } ${RELOCATING+ > ${DATA_MEMORY}}
381
382  ${RELOCATING+__data_section_size = SIZEOF(.data);}
383  ${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
384  ${RELOCATING+__data_image_end = __data_image + __data_section_size;}
385
386  ${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}
387
388  /* .install ${RELOCATING-0}:
389  {
390    . = _data_image_end;
391  } ${RELOCATING+ > ${TEXT_MEMORY}} */
392
393  /* Relocation for some bss and data sections.  */
394  ${RELOCATING-${BSS_DATA_RELOC}}
395  ${RELOCATING-${SOFT_REGS_RELOC}}
396
397  .bss ${RELOCATING-0} :
398  {
399    ${RELOCATING+__bss_start = .;}
400    ${RELOCATING+*(.sbss)}
401    ${RELOCATING+*(.scommon)}
402
403    *(.dynbss)
404    *(.bss)
405    ${RELOCATING+*(.bss.*)}
406    ${RELOCATING+*(.gnu.linkonce.b.*)}
407    *(COMMON)
408    ${RELOCATING+PROVIDE (_end = .);}
409  } ${RELOCATING+ > ${DATA_MEMORY}}
410  ${RELOCATING+__bss_size = SIZEOF(.bss);}
411  ${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}
412
413  .eeprom ${RELOCATING-0} :
414  {
415    *(.eeprom)
416    *(.eeprom.*)
417  } ${RELOCATING+ > ${EEPROM_MEMORY}}
418
419  ${RELOCATING+${VECTORS}}
420
421  /* Stabs debugging sections.  */
422  .stab		 0 : { *(.stab) }
423  .stabstr	 0 : { *(.stabstr) }
424  .stab.excl	 0 : { *(.stab.excl) }
425  .stab.exclstr	 0 : { *(.stab.exclstr) }
426  .stab.index	 0 : { *(.stab.index) }
427  .stab.indexstr 0 : { *(.stab.indexstr) }
428
429  .comment	 0 : { *(.comment) }
430
431  /* DWARF debug sections.
432     Symbols in the DWARF debugging sections are relative to the beginning
433     of the section so we begin them at 0.
434     Treatment of DWARF debug section must be at end of the linker
435     script to avoid problems when there are undefined symbols. It's necessary
436     to avoid that the DWARF section is relocated before such undefined
437     symbols are found.  */
438
439  /* DWARF 1 */
440  .debug	 0 : { *(.debug) }
441  .line		 0 : { *(.line) }
442
443  /* GNU DWARF 1 extensions */
444  .debug_srcinfo 0 : { *(.debug_srcinfo) }
445  .debug_sfnames 0 : { *(.debug_sfnames) }
446
447  /* DWARF 1.1 and DWARF 2 */
448  .debug_aranges  0 : { *(.debug_aranges) }
449  .debug_pubnames 0 : { *(.debug_pubnames) }
450
451  /* DWARF 2 */
452  .debug_info     0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
453  .debug_abbrev   0 : { *(.debug_abbrev) }
454  .debug_line     0 : { *(.debug_line) }
455  .debug_frame    0 : { *(.debug_frame) }
456  .debug_str      0 : { *(.debug_str) }
457  .debug_loc      0 : { *(.debug_loc) }
458  .debug_macinfo  0 : { *(.debug_macinfo) }
459}
460EOF
461