1/*
2 * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
3 *
4 * This software may be freely used, copied, modified, and distributed
5 * provided that the above copyright notice is preserved in all copies of the
6 * software.
7 */
8
9/*
10 * ARM debugger toolbox : dbg_rdi.h
11 */
12
13/*
14 * RCS $Revision: 1.3 $
15 * Checkin $Date: 2004/12/27 14:00:54 $
16 */
17
18#ifndef dbg_rdi__h
19#define dbg_rdi__h
20
21/***************************************************************************\
22*                            Other RDI values                               *
23\***************************************************************************/
24
25#define RDISex_Little           0 /* the byte sex of the debuggee       */
26#define RDISex_Big              1
27#define RDISex_DontCare         2
28
29#define RDIPoint_EQ             0 /* the different types of break/watchpoints */
30#define RDIPoint_GT             1
31#define RDIPoint_GE             2
32#define RDIPoint_LT             3
33#define RDIPoint_LE             4
34#define RDIPoint_IN             5
35#define RDIPoint_OUT            6
36#define RDIPoint_MASK           7
37
38#define RDIPoint_16Bit          16  /* 16-bit breakpoint                */
39#define RDIPoint_Conditional    32
40
41/* ORRed with point type in extended RDP break and watch messages       */
42#define RDIPoint_Inquiry        64
43#define RDIPoint_Handle         128 /* messages                         */
44
45#define RDIWatch_ByteRead       1 /* types of data accesses to watch for*/
46#define RDIWatch_HalfRead       2
47#define RDIWatch_WordRead       4
48#define RDIWatch_ByteWrite      8
49#define RDIWatch_HalfWrite      16
50#define RDIWatch_WordWrite      32
51
52#define RDIReg_R15              (1L << 15) /* mask values for CPU       */
53#define RDIReg_PC               (1L << 16)
54#define RDIReg_CPSR             (1L << 17)
55#define RDIReg_SPSR             (1L << 18)
56#define RDINumCPURegs           19
57
58#define RDINumCPRegs            10 /* current maximum                   */
59
60#define RDIMode_Curr            255
61
62/* RDI_Info subcodes */
63/* rdp in parameters are all preceded by                                */
64/*   in byte = RDP_Info, word = info subcode                            */
65/*     out parameters are all preceded by                               */
66/*   out byte = RDP_Return                                              */
67
68#define RDIInfo_Target          0
69/* rdi: out ARMword *targetflags, out ARMword *processor id             */
70/* rdp: in none, out word targetflags, word processorid, byte status    */
71/* the following bits are defined in targetflags                        */
72#  define RDITarget_LogSpeed                  0x0f
73#  define RDITarget_HW                        0x10    /* else emulator  */
74#  define RDITarget_AgentMaxLevel             0xe0
75#  define RDITarget_AgentLevelShift       5
76#  define RDITarget_DebuggerMinLevel         0x700
77#  define RDITarget_DebuggerLevelShift    8
78#  define RDITarget_CanReloadAgent           0x800
79#  define RDITarget_CanInquireLoadSize      0x1000
80#  define RDITarget_UnderstandsRDPInterrupt 0x2000
81#  define RDITarget_CanProfile              0x4000
82#  define RDITarget_Code16                  0x8000
83#  define RDITarget_HasCommsChannel        0x10000
84
85#define RDIInfo_Points          1
86/* rdi: out ARMword *pointcapabilities                                  */
87/* rdp: in none, out word pointcapabilities, byte status                */
88/* the following bits are defined in pointcapabilities                  */
89#  define RDIPointCapability_Comparison   1
90#  define RDIPointCapability_Range        2
91/* 4 to 128 are RDIWatch_xx{Read,Write} left-shifted by two */
92#  define RDIPointCapability_Mask         0x100
93#  define RDIPointCapability_ThreadBreak  0x200
94#  define RDIPointCapability_ThreadWatch  0x400
95#  define RDIPointCapability_CondBreak    0x800
96#  define RDIPointCapability_Status       0x1000 /* status enquiries available */
97
98#define RDIInfo_Step            2
99/* rdi: out ARMword *stepcapabilities                                   */
100/* rdp: in none, out word stepcapabilities, byte status                 */
101/* the following bits are defined in stepcapabilities                   */
102#  define RDIStep_Multiple      1
103#  define RDIStep_PCChange      2
104#  define RDIStep_Single        4
105
106#define RDIInfo_MMU             3
107/* rdi: out ARMword *mmuidentity                                        */
108/* rdp: in none, out word mmuidentity, byte status                      */
109
110#define RDIInfo_DownLoad        4
111/* Inquires whether configuration download and selection is available.  */
112/* rdp: in none, out byte status                                        */
113/* No argument, no return value. status == ok if available              */
114
115#define RDIInfo_SemiHosting     5
116/* Inquires whether RDISemiHosting_* RDI_Info calls are available.      */
117/* rdp: in none, out byte status                                        */
118/* No argument, no return value. status == ok if available              */
119
120#define RDIInfo_CoPro           6
121/* Inquires whether CoPro RDI_Info calls are available.                 */
122/* rdp: in none, out byte status                                        */
123/* No argument, no return value. status == ok if available              */
124
125#define RDIInfo_Icebreaker      7
126/* Inquires whether debuggee controlled by IceBreaker.                  */
127/* rdp: in none, out byte status                                        */
128/* No argument, no return value. status == ok if available              */
129
130#define RDIMemory_Access        8
131/* rdi: out RDI_MemAccessStats *p, in ARMword *handle                   */
132/* rdp: in word handle                                                  */
133/*      out word nreads, word nwrites, word sreads, word swrites,       */
134/*          word ns, word s, byte status                                */
135
136/* Get memory access information for memory block with specified handle */
137
138#define RDIMemory_Map           9
139/* rdi: in  RDI_MemDescr md[n], in ARMword *n                           */
140/* rdp: in word n, n * {                                                */
141/*           word handle, word start, word limit,                       */
142/*           byte width, byte access                                    */
143/*           word Nread_ns, word Nwrite_ns,                             */
144/*           word Sread_ns, word Swrite_ns}                             */
145/*      out byte status                                                 */
146/* Sets memory characteristics.                                         */
147
148#define RDISet_CPUSpeed         10
149/* rdi: in  ARMword *speed                                              */
150/* rdp: in word speed, out byte status                                  */
151/* Sets CPU speed (in ns)                                               */
152
153#define RDIRead_Clock           12
154/* rdi: out ARMword *ns, out ARMword *s                                 */
155/* rdp: in none, out word ns, word s, byte status                       */
156/* Reads simulated time                                                 */
157
158#define RDIInfo_Memory_Stats    13
159/* Inquires whether RDI_Info codes 8-10 are available                   */
160/* rdp: in none, out byte status                                        */
161/* No argument, no return value. status == ok if available              */
162
163/* The next two are only to be used if RDIInfo_DownLoad returned no     */
164/* error                                                                */
165#define RDIConfig_Count         14
166/* rdi: out ARMword *count                                              */
167/* rdp: out byte status, word count (if status == OK)                   */
168
169/* In addition, the next one is only to be used if RDIConfig_Count      */
170/* returned no error                                                    */
171typedef struct { unsigned32 version; char name[32]; } RDI_ConfigDesc;
172#define RDIConfig_Nth           15
173/* rdi: in ARMword *n, out RDI_ConfigDesc *                             */
174/* rdp: in word n                                                       */
175/*      out word version, byte namelen, bytes * bytelen name,           */
176/*          byte status                                                 */
177
178/* Set a front-end polling function to be used from within driver poll  */
179/* loops                                                                */
180typedef void RDI_PollProc(void *);
181typedef struct { RDI_PollProc *p; void *arg; } RDI_PollDesc;
182#define RDISet_PollProc         16
183/* rdi: in RDI_PollDesc const *from, RDI_PollDesc *to                   */
184/*      if from non-NULL, sets the polling function from it             */
185/*      if to non-NULL, returns the previous polling function to it     */
186/* No corresponding RDP operation                                       */
187
188/* Called on debugger startup to see if the target is ready to execute  */
189#define RDIInfo_CanTargetExecute 20
190/* rdi: in  void
191 *      out byte status (RDIError_NoError => Yes, Otherwise No)
192 */
193
194/* Called to set the top of target memory in an ICEman2 system
195 * This is then used by ICEman to tell the C Library via the INFOHEAP
196 * SWI where the stack should start.
197 * Note that only ICEman2 supports this call.  Other systems eg.
198 * Demon, Angel, will simply return an error, which means that setting
199 * the top of memory in this fashion is not supported.
200 */
201#define RDIInfo_SetTopMem        21
202/* rdi: in  word mem_top
203 *      out byte status (RDIError_NoError => Done, Other => Not supported
204 */
205
206/* Called before performing a loadagent to determine the endianess of
207 * the debug agent, so that images of the wrong bytesex can be
208 * complained about
209 */
210#define RDIInfo_AgentEndianess   22
211/* rdi: in void
212 *      out byte status
213 *      status should be RDIError_LittleEndian or RDIError_BigEndian
214 *      any other value indicates the target does not support this
215 *      request, so the debugger will have to make a best guess, which
216 *      probably means only allow little endian loadagenting.
217 */
218
219/* The next two are only to be used if the value returned by            */
220/* RDIInfo_Points has RDIPointCapability_Status set.                    */
221#define RDIPointStatus_Watch    0x80
222#define RDIPointStatus_Break    0x81
223/* rdi: inout ARMword * (in handle, out hwresource), out ARMword *type  */
224/* rdp: in word handle, out word hwresource, word type, byte status     */
225
226#define RDISignal_Stop          0x100
227/* Requests that the debuggee stop                                      */
228/* No arguments, no return value                                        */
229/* rdp: no reply (when the debuggee stops, there will be a reply to the */
230/*      step or execute request which started it)                       */
231
232#define RDIVector_Catch         0x180
233/* rdi: in ARMword *bitmap                                              */
234/* rdp: int word bitmap, out byte status                                */
235/* bit i in bitmap set to cause vector i to cause entry to debugger     */
236
237/* The next four are only to be used if RDIInfo_Semihosting returned    */
238/* no error                                                             */
239#define RDISemiHosting_SetState 0x181
240/* rdi: in ARMword *semihostingstate                                    */
241/* rdp: in word semihostingstate, out byte status                       */
242#define RDISemiHosting_GetState 0x182
243/* rdi: out ARMword *semihostingstate                                   */
244/* rdp: in none, out word semihostingstate, byte status                 */
245#define RDISemiHosting_SetVector 0x183
246/* rdi: in ARMword *semihostingvector                                   */
247/* rdp: in word semihostingvector, out byte status                      */
248#define RDISemiHosting_GetVector 0x184
249/* rdi: out ARMword *semihostingvector                                  */
250/* rdp: in none, out word semihostingvector, byte status                */
251
252/* The next two are only to be used if RDIInfo_Icebreaker returned      */
253/* no error                                                             */
254#define RDIIcebreaker_GetLocks  0x185
255/* rdi: out ARMword *lockedstate                                        */
256/* rdp: in none, out word lockedstate, byte status                      */
257
258#define RDIIcebreaker_SetLocks  0x186
259/* rdi: in ARMword *lockedstate                                         */
260/* rdp: in word lockedstate, out byte status                            */
261
262/* lockedstate is a bitmap of the icebreaker registers locked against   */
263/* use by IceMan (because explicitly written by the user)               */
264
265#define RDIInfo_GetLoadSize     0x187
266/* rdi: out ARMword *maxloadsize                                        */
267/* rdp: in none, out word maxloadsize, byte status                      */
268/* Inquires the maximum length of data transfer the agent is prepared   */
269/* to receive                                                           */
270/* Only usable if RDIInfo_Target returned RDITarget_CanInquireLoadSize  */
271/* rdi: out ARMword *size                                               */
272
273/* Only to be used if the value returned by RDIInfo_Target had          */
274/* RDITarget_HasCommsChannel set                                        */
275typedef void RDICCProc_ToHost(void *arg, ARMword data);
276typedef void RDICCProc_FromHost(void *arg, ARMword *data, int *valid);
277
278#define RDICommsChannel_ToHost  0x188
279/* rdi: in RDICCProc_ToHost *, in void *arg                             */
280/* rdp: in byte connect, out byte status                                */
281#define RDICommsChannel_FromHost 0x189
282/* rdi: in RDICCProc_FromHost *, in void *arg                           */
283/* rdp: in byte connect, out byte status                                */
284
285/* These 4 are only to be used if RDIInfo_Semihosting returns no error  */
286#define RDISemiHosting_SetARMSWI 0x190
287/* rdi: in ARMword ARM_SWI_number                                       */
288/* rdp: in ARMword ARM_SWI_number, out byte status                      */
289
290#define RDISemiHosting_GetARMSWI 0x191
291/* rdi: out ARMword ARM_SWI_number                                      */
292/* rdp: out ARMword ARM_SWI_number, byte status                         */
293
294#define RDISemiHosting_SetThumbSWI 0x192
295/* rdi: in ARMword Thumb_SWI_number                                     */
296/* rdp: in ARMword Thumb_SWI_number, out byte status                    */
297
298#define RDISemiHosting_GetThumbSWI 0x193
299/* rdi: out ARMword ARM_Thumb_number                                    */
300/* rdp: out ARMword ARM_Thumb_number, byte status                       */
301
302
303#define RDICycles               0x200
304/* rdi: out ARMword cycles[12]                                          */
305/* rdp: in none, out 6 words cycles, byte status                        */
306/* the rdi result represents 6 big-endian doublewords; the rdp results  */
307/* return values for the ls halves of these                             */
308#  define RDICycles_Size        48
309
310#define RDIErrorP               0x201
311/* rdi: out ARMaddress *errorp                                          */
312/* rdp: in none, out word errorp, byte status                           */
313/* Returns the error pointer associated with the last return from step  */
314/* or execute with status RDIError_Error.                               */
315
316#define RDISet_Cmdline          0x300
317/* rdi: in char *commandline (a null-terminated string)                 */
318/* No corresponding RDP operation (cmdline is sent to the agent in      */
319/* response to SWI_GetEnv)                                              */
320
321#define RDISet_RDILevel         0x301
322/* rdi: in ARMword *level                                               */
323/* rdp: in word level, out byte status                                  */
324/* Sets the RDI/RDP protocol level to be used (must lie between the     */
325/* limits returned by RDIInfo_Target).                                  */
326
327#define RDISet_Thread           0x302
328/* rdi: in ARMword *threadhandle                                        */
329/* rdp: in word threadhandle, out byte status                           */
330/* Sets the thread context for subsequent thread-sensitive operations   */
331/* (null value sets no thread)                                          */
332
333/* The next two are only to be used if RDI_read or RDI_write returned   */
334/* RDIError_LittleEndian or RDIError_BigEndian, to signify that the     */
335/* debugger has noticed.                                                */
336#define RDIInfo_AckByteSex  0x303
337/* rdi: in ARMword *sex (RDISex_Little or RDISex_Big)                   */
338
339/* The next two are only to be used if RDIInfo_CoPro returned no error  */
340#define RDIInfo_DescribeCoPro   0x400
341/* rdi: in int *cpno, Dbg_CoProDesc *cpd                                */
342/* rdp: in byte cpno,                                                   */
343/*         cpd->entries * {                                             */
344/*           byte rmin, byte rmax, byte nbytes, byte access,            */
345/*           byte cprt_r_b0, cprt_r_b1, cprt_w_b0, cprt_w_b1}           */
346/*         byte = 255                                                   */
347/*      out byte status                                                 */
348
349#define RDIInfo_RequestCoProDesc 0x401
350/* rdi: in int *cpno, out Dbg_CoProDesc *cpd                            */
351/* rpd: in byte cpno                                                    */
352/*      out nentries * {                                                */
353/*            byte rmin, byte rmax, byte nbytes, byte access,           */
354/*          }                                                           */
355/*          byte = 255, byte status                                     */
356
357#define RDIInfo_Log             0x800
358/* rdi: out ARMword *logsetting                                         */
359/* No corresponding RDP operation                                       */
360#define RDIInfo_SetLog          0x801
361/* rdi: in ARMword *logsetting                                          */
362/* No corresponding RDP operation                                       */
363
364#define RDIProfile_Stop         0x500
365/* No arguments, no return value                                        */
366/* rdp: in none, out byte status                                        */
367/* Requests that pc sampling stop                                       */
368
369#define RDIProfile_Start        0x501
370/* rdi: in ARMword *interval                                            */
371/* rdp: in word interval, out byte status                               */
372/* Requests that pc sampling start, with period <interval> usec         */
373
374#define RDIProfile_WriteMap     0x502
375/* rdi: in ARMword map[]                                                */
376/* map[0] is the length of the array, subsequent elements are sorted    */
377/* and are the base of ranges for pc sampling (so if the sampled pc     */
378/* lies between map[i] and map[i+1], count[i] is incremented).          */
379/* rdp: a number of messages, each of form:                             */
380/*        in word len, word size, word offset, <size> words map data    */
381/*        out status                                                    */
382/* len, size and offset are all word counts.                            */
383
384#define RDIProfile_ReadMap      0x503
385/* rdi: in ARMword *len, out ARMword counts[len]                        */
386/* Requests that the counts array be set to the accumulated pc sample   */
387/* counts                                                               */
388/* rdp: a number of messages, each of form:                             */
389/*        in word offset, word size                                     */
390/*        out <size> words, status                                      */
391/* len, size and offset are all word counts.                            */
392
393#define RDIProfile_ClearCounts  0x504
394/* No arguments, no return value                                        */
395/* rdp: in none, out byte status                                        */
396/* Requests that pc sample counts be set to zero                        */
397
398#define RDIInfo_RequestReset    0x900
399/* Request reset of the target environment                              */
400/* No arguments, no return value                                        */
401/* No RDP equivalent, sends an RDP reset                                */
402
403#define RDIInfo_CapabilityRequest 0x8000
404/* Request whether the interface supports the named capability. The     */
405/* capability is specified by or'ing the RDIInfo number with this, and  */
406/* sending that request                                                 */
407/* rdi: in none                                                         */
408/* rdp: in none, out byte status                                        */
409
410typedef struct {
411  ARMword len;
412  ARMword map[1];
413} RDI_ProfileMap;
414
415typedef unsigned32 PointHandle;
416typedef unsigned32 ThreadHandle;
417#define RDINoPointHandle        ((PointHandle)-1L)
418#define RDINoHandle             ((ThreadHandle)-1L)
419
420struct Dbg_ConfigBlock;
421struct Dbg_HostosInterface;
422struct Dbg_MCState;
423typedef int rdi_open_proc(unsigned type, struct Dbg_ConfigBlock const *config,
424                          struct Dbg_HostosInterface const *i,
425                          struct Dbg_MCState *dbg_state);
426typedef int rdi_close_proc(void);
427typedef int rdi_read_proc(ARMword source, void *dest, unsigned *nbytes);
428typedef int rdi_write_proc(const void *source, ARMword dest, unsigned *nbytes);
429typedef int rdi_CPUread_proc(unsigned mode, unsigned32 mask, ARMword *state);
430typedef int rdi_CPUwrite_proc(unsigned mode, unsigned32 mask, ARMword const *state);
431typedef int rdi_CPread_proc(unsigned CPnum, unsigned32 mask, ARMword *state);
432typedef int rdi_CPwrite_proc(unsigned CPnum, unsigned32 mask, ARMword const *state);
433typedef int rdi_setbreak_proc(ARMword address, unsigned type, ARMword bound,
434                              PointHandle *handle);
435typedef int rdi_clearbreak_proc(PointHandle handle);
436typedef int rdi_setwatch_proc(ARMword address, unsigned type, unsigned datatype,
437                              ARMword bound, PointHandle *handle);
438typedef int rdi_clearwatch_proc(PointHandle handle);
439typedef int rdi_execute_proc(PointHandle *handle);
440typedef int rdi_step_proc(unsigned ninstr, PointHandle *handle);
441typedef int rdi_info_proc(unsigned type, ARMword *arg1, ARMword *arg2);
442typedef int rdi_pointinq_proc(ARMword *address, unsigned type,
443                              unsigned datatype, ARMword *bound);
444
445typedef enum {
446    RDI_ConfigCPU,
447    RDI_ConfigSystem
448} RDI_ConfigAspect;
449
450typedef enum {
451    RDI_MatchAny,
452    RDI_MatchExactly,
453    RDI_MatchNoEarlier
454} RDI_ConfigMatchType;
455
456typedef int rdi_addconfig_proc(unsigned32 nbytes);
457typedef int rdi_loadconfigdata_proc(unsigned32 nbytes, char const *data);
458typedef int rdi_selectconfig_proc(RDI_ConfigAspect aspect, char const *name,
459                                  RDI_ConfigMatchType matchtype, unsigned versionreq,
460                                  unsigned *versionp);
461
462typedef char *getbufferproc(void *getbarg, unsigned32 *sizep);
463typedef int rdi_loadagentproc(ARMword dest, unsigned32 size, getbufferproc *getb, void *getbarg);
464typedef int rdi_targetisdead(void);
465
466typedef struct {
467    int itemmax;
468    char const * const *names;
469} RDI_NameList;
470
471typedef RDI_NameList const *rdi_namelistproc(void);
472
473typedef int rdi_errmessproc(char *buf, int buflen, int errnum);
474
475struct RDIProcVec {
476    char rditypename[12];
477
478    rdi_open_proc       *open;
479    rdi_close_proc      *close;
480    rdi_read_proc       *read;
481    rdi_write_proc      *write;
482    rdi_CPUread_proc    *CPUread;
483    rdi_CPUwrite_proc   *CPUwrite;
484    rdi_CPread_proc     *CPread;
485    rdi_CPwrite_proc    *CPwrite;
486    rdi_setbreak_proc   *setbreak;
487    rdi_clearbreak_proc *clearbreak;
488    rdi_setwatch_proc   *setwatch;
489    rdi_clearwatch_proc *clearwatch;
490    rdi_execute_proc    *execute;
491    rdi_step_proc       *step;
492    rdi_info_proc       *info;
493    /* V2 RDI */
494    rdi_pointinq_proc   *pointinquiry;
495
496    /* These three useable only if RDIInfo_DownLoad returns no error */
497    rdi_addconfig_proc  *addconfig;
498    rdi_loadconfigdata_proc *loadconfigdata;
499    rdi_selectconfig_proc *selectconfig;
500
501    rdi_namelistproc    *drivernames;
502    rdi_namelistproc    *cpunames;
503
504    rdi_errmessproc     *errmess;
505
506    /* Only if RDIInfo_Target returns a value with RDITarget_LoadAgent set */
507    rdi_loadagentproc   *loadagent;
508    rdi_targetisdead    *targetisdead;
509};
510
511#endif
512