1/* Target Definitions for R8C/M16C/M32C 2 Copyright (C) 2005 3 Free Software Foundation, Inc. 4 Contributed by Red Hat. 5 6 This file is part of GCC. 7 8 GCC is free software; you can redistribute it and/or modify it 9 under the terms of the GNU General Public License as published 10 by the Free Software Foundation; either version 2, or (at your 11 option) any later version. 12 13 GCC is distributed in the hope that it will be useful, but WITHOUT 14 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 15 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 16 License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with GCC; see the file COPYING. If not, write to the Free 20 Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 21 02110-1301, USA. */ 22 23#ifndef GCC_M32C_H 24#define GCC_M32C_H 25 26/* Controlling the Compilation Driver, `gcc'. */ 27 28#undef STARTFILE_SPEC 29#define STARTFILE_SPEC "crt0.o%s crtbegin.o%s" 30 31/* There are four CPU series we support, but they basically break down 32 into two families - the R8C/M16C families, with 16 bit address 33 registers and one set of opcodes, and the M32CM/M32C group, with 24 34 bit address registers and a different set of opcodes. The 35 assembler doesn't care except for which opcode set is needed; the 36 big difference is in the memory maps, which we cover in 37 LIB_SPEC. */ 38 39#undef ASM_SPEC 40#define ASM_SPEC "\ 41%{mcpu=r8c:--m16c} \ 42%{mcpu=m16c:--m16c} \ 43%{mcpu=m32cm:--m32c} \ 44%{mcpu=m32c:--m32c} " 45 46/* The default is R8C hardware. We support a simulator, which has its 47 own libgloss and link map, plus one default link map for each chip 48 family. Most of the logic here is making sure we do the right 49 thing when no CPU is specified, which defaults to R8C. */ 50#undef LIB_SPEC 51#define LIB_SPEC "-( -lc %{msim*:-lsim}%{!msim*:-lnosys} -) \ 52%{msim*:%{!T*: %{mcpu=m32cm:-Tsim24.ld}%{mcpu=m32c:-Tsim24.ld} \ 53 %{!mcpu=m32cm:%{!mcpu=m32c:-Tsim16.ld}}}} \ 54%{!T*:%{!msim*: %{mcpu=m16c:-Tm16c.ld} \ 55 %{mcpu=m32cm:-Tm32cm.ld} \ 56 %{mcpu=m32c:-Tm32c.ld} \ 57 %{!mcpu=m16c:%{!mcpu=m32cm:%{!mcpu=m32c:-Tr8c.ld}}}}} \ 58" 59 60/* Run-time Target Specification */ 61 62/* Nothing unusual here. */ 63#define TARGET_CPU_CPP_BUILTINS() \ 64 { \ 65 builtin_assert ("cpu=m32c"); \ 66 builtin_assert ("machine=m32c"); \ 67 builtin_define ("__m32c__=1"); \ 68 if (TARGET_R8C) \ 69 builtin_define ("__r8c_cpu__=1"); \ 70 if (TARGET_M16C) \ 71 builtin_define ("__m16c_cpu__=1"); \ 72 if (TARGET_M32CM) \ 73 builtin_define ("__m32cm_cpu__=1"); \ 74 if (TARGET_M32C) \ 75 builtin_define ("__m32c_cpu__=1"); \ 76 } 77 78/* The pragma handlers need to know if we've started processing 79 functions yet, as the memregs pragma should only be given at the 80 beginning of the file. This variable starts off TRUE and later 81 becomes FALSE. */ 82extern int ok_to_change_target_memregs; 83extern int target_memregs; 84 85/* TARGET_CPU is a multi-way option set in m32c.opt. While we could 86 use enums or defines for this, this and m32c.opt are the only 87 places that know (or care) what values are being used. */ 88#define TARGET_R8C (target_cpu == 'r') 89#define TARGET_M16C (target_cpu == '6') 90#define TARGET_M32CM (target_cpu == 'm') 91#define TARGET_M32C (target_cpu == '3') 92 93/* Address register sizes. Warning: these are used all over the place 94 to select between the two CPU families in general. */ 95#define TARGET_A16 (TARGET_R8C || TARGET_M16C) 96#define TARGET_A24 (TARGET_M32CM || TARGET_M32C) 97 98#define TARGET_VERSION fprintf (stderr, " (m32c)"); 99 100#define OVERRIDE_OPTIONS m32c_override_options (); 101 102/* Defining data structures for per-function information */ 103 104typedef struct machine_function GTY (()) 105{ 106 /* How much we adjust the stack when returning from an exception 107 handler. */ 108 rtx eh_stack_adjust; 109 110 /* TRUE if the current function is an interrupt handler. */ 111 int is_interrupt; 112 113 /* TRUE if the current function is a leaf function. Currently, this 114 only affects saving $a0 in interrupt functions. */ 115 int is_leaf; 116 117 /* Bitmask that keeps track of which registers are used in an 118 interrupt function, so we know which ones need to be saved and 119 restored. */ 120 int intr_pushm; 121 /* Likewise, one element for each memreg that needs to be saved. */ 122 char intr_pushmem[16]; 123 124 /* TRUE if the current function can use a simple RTS to return, instead 125 of the longer ENTER/EXIT pair. */ 126 int use_rts; 127} 128machine_function; 129 130#define INIT_EXPANDERS m32c_init_expanders () 131 132/* Storage Layout */ 133 134#define BITS_BIG_ENDIAN 0 135#define BYTES_BIG_ENDIAN 0 136#define WORDS_BIG_ENDIAN 0 137 138/* We can do QI, HI, and SI operations pretty much equally well, but 139 GCC expects us to have a "native" format, so we pick the one that 140 matches "int". Pointers are 16 bits for R8C/M16C (when TARGET_A16 141 is true) and 24 bits for M32CM/M32C (when TARGET_A24 is true), but 142 24 bit pointers are stored in 32 bit words. */ 143#define BITS_PER_UNIT 8 144#define UNITS_PER_WORD 2 145#define POINTER_SIZE (TARGET_A16 ? 16 : 32) 146#define POINTERS_EXTEND_UNSIGNED 1 147 148/* These match the alignment enforced by the two types of stack operations. */ 149#define PARM_BOUNDARY (TARGET_A16 ? 8 : 16) 150#define STACK_BOUNDARY (TARGET_A16 ? 8 : 16) 151 152/* We do this because we care more about space than about speed. For 153 the chips with 16 bit busses, we could set these to 16 if 154 desired. */ 155#define FUNCTION_BOUNDARY 8 156#define BIGGEST_ALIGNMENT 8 157 158#define STRICT_ALIGNMENT 0 159#define SLOW_BYTE_ACCESS 1 160 161/* Layout of Source Language Data Types */ 162 163#define INT_TYPE_SIZE 16 164#define SHORT_TYPE_SIZE 16 165#define LONG_TYPE_SIZE 32 166#define LONG_LONG_TYPE_SIZE 64 167 168#define FLOAT_TYPE_SIZE 32 169#define DOUBLE_TYPE_SIZE 64 170#define LONG_DOUBLE_TYPE_SIZE 64 171 172#define DEFAULT_SIGNED_CHAR 1 173 174#undef PTRDIFF_TYPE 175#define PTRDIFF_TYPE (TARGET_A16 ? "int" : "long int") 176 177/* REGISTER USAGE */ 178 179/* Register Basics */ 180 181/* Register layout: 182 183 [r0h][r0l] $r0 (16 bits, or two 8 bit halves) 184 [--------] $r2 (16 bits) 185 [r1h][r1l] $r1 (16 bits, or two 8 bit halves) 186 [--------] $r3 (16 bits) 187 [---][--------] $a0 (might be 24 bits) 188 [---][--------] $a1 (might be 24 bits) 189 [---][--------] $sb (might be 24 bits) 190 [---][--------] $fb (might be 24 bits) 191 [---][--------] $sp (might be 24 bits) 192 [-------------] $pc (20 or 24 bits) 193 [---] $flg (CPU flags) 194 [---][--------] $argp (virtual) 195 [--------] $mem0 (all 16 bits) 196 . . . 197 [--------] $mem14 198*/ 199 200#define FIRST_PSEUDO_REGISTER 20 201 202/* Note that these two tables are modified based on which CPU family 203 you select; see m32c_conditional_register_usage for details. */ 204 205/* r0 r2 r1 r3 - a0 a1 sb fb - sp pc flg argp - mem0..mem14 */ 206#define FIXED_REGISTERS { 0, 0, 0, 0, \ 207 0, 0, 1, 0, \ 208 1, 1, 0, 1, \ 209 0, 0, 0, 0, 0, 0, 0, 0 } 210#define CALL_USED_REGISTERS { 1, 1, 1, 1, \ 211 1, 1, 1, 0, \ 212 1, 1, 1, 1, \ 213 1, 1, 1, 1, 1, 1, 1, 1 } 214 215#define CONDITIONAL_REGISTER_USAGE m32c_conditional_register_usage (); 216 217/* The *_REGNO theme matches m32c.md and most register number 218 arguments; the PC_REGNUM is the odd one out. */ 219#ifndef PC_REGNO 220#define PC_REGNO 9 221#endif 222#define PC_REGNUM PC_REGNO 223 224/* Order of Allocation of Registers */ 225 226#define REG_ALLOC_ORDER { \ 227 0, 1, 2, 3, 4, 5, /* r0..r3, a0, a1 */ \ 228 12, 13, 14, 15, 16, 17, 18, /* mem0..mem7 */ \ 229 6, 7, 8, 9, 10, 11 /* sb, fb, sp, pc, flg, ap */ } 230 231/* How Values Fit in Registers */ 232 233#define HARD_REGNO_NREGS(R,M) m32c_hard_regno_nregs (R, M) 234#define HARD_REGNO_MODE_OK(R,M) m32c_hard_regno_ok (R, M) 235#define MODES_TIEABLE_P(M1,M2) m32c_modes_tieable_p (M1, M2) 236#define AVOID_CCMODE_COPIES 237 238/* Register Classes */ 239 240/* Most registers are special purpose in some form or another, so this 241 table is pretty big. Class names are used for constraints also; 242 for example the HL_REGS class (HL below) is "Rhl" in the md files. 243 See m32c_reg_class_from_constraint for the mapping. There's some 244 duplication so that we can better isolate the reason for using 245 constraints in the md files from the actual registers used; for 246 example we may want to exclude a1a0 from SI_REGS in the future, 247 without precluding their use as HImode registers. */ 248 249/* m7654 - m3210 - argp flg pc sp - fb sb a1 a0 - r3 r1 r2 r0 */ 250/* mmPAR */ 251#define REG_CLASS_CONTENTS \ 252{ { 0x00000000 }, /* NO */\ 253 { 0x00000100 }, /* SP - sp */\ 254 { 0x00000080 }, /* FB - fb */\ 255 { 0x00000040 }, /* SB - sb */\ 256 { 0x000001c0 }, /* CR - sb fb sp */\ 257 { 0x00000001 }, /* R0 - r0 */\ 258 { 0x00000004 }, /* R1 - r1 */\ 259 { 0x00000002 }, /* R2 - r2 */\ 260 { 0x00000008 }, /* R3 - r3 */\ 261 { 0x00000003 }, /* R02 - r0r2 */\ 262 { 0x00000005 }, /* HL - r0 r1 */\ 263 { 0x00000005 }, /* QI - r0 r1 */\ 264 { 0x0000000a }, /* R23 - r2 r3 */\ 265 { 0x0000000f }, /* R03 - r0r2 r1r3 */\ 266 { 0x0000000f }, /* DI - r0r2r1r3 + mems */\ 267 { 0x00000010 }, /* A0 - a0 */\ 268 { 0x00000020 }, /* A1 - a1 */\ 269 { 0x00000030 }, /* A - a0 a1 */\ 270 { 0x000000f0 }, /* AD - a0 a1 sb fp */\ 271 { 0x000001f0 }, /* PS - a0 a1 sb fp sp */\ 272 { 0x0000000f }, /* SI - r0r2 r1r3 a0a1 */\ 273 { 0x0000003f }, /* HI - r0 r1 r2 r3 a0 a1 */\ 274 { 0x0000003f }, /* RA - r0..r3 a0 a1 */\ 275 { 0x0000007f }, /* GENERAL */\ 276 { 0x00000400 }, /* FLG */\ 277 { 0x000001ff }, /* HC - r0l r1 r2 r3 a0 a1 sb fb sp */\ 278 { 0x000ff000 }, /* MEM */\ 279 { 0x000ff003 }, /* R02_A_MEM */\ 280 { 0x000ff005 }, /* A_HL_MEM */\ 281 { 0x000ff00c }, /* R1_R3_A_MEM */\ 282 { 0x000ff00f }, /* R03_MEM */\ 283 { 0x000ff03f }, /* A_HI_MEM */\ 284 { 0x000ff0ff }, /* A_AD_CR_MEM_SI */\ 285 { 0x000ff1ff }, /* ALL */\ 286} 287 288enum reg_class 289{ 290 NO_REGS, 291 SP_REGS, 292 FB_REGS, 293 SB_REGS, 294 CR_REGS, 295 R0_REGS, 296 R1_REGS, 297 R2_REGS, 298 R3_REGS, 299 R02_REGS, 300 HL_REGS, 301 QI_REGS, 302 R23_REGS, 303 R03_REGS, 304 DI_REGS, 305 A0_REGS, 306 A1_REGS, 307 A_REGS, 308 AD_REGS, 309 PS_REGS, 310 SI_REGS, 311 HI_REGS, 312 RA_REGS, 313 GENERAL_REGS, 314 FLG_REGS, 315 HC_REGS, 316 MEM_REGS, 317 R02_A_MEM_REGS, 318 A_HL_MEM_REGS, 319 R1_R3_A_MEM_REGS, 320 R03_MEM_REGS, 321 A_HI_MEM_REGS, 322 A_AD_CR_MEM_SI_REGS, 323 ALL_REGS, 324 LIM_REG_CLASSES 325}; 326 327#define N_REG_CLASSES LIM_REG_CLASSES 328 329#define REG_CLASS_NAMES {\ 330"NO_REGS", \ 331"SP_REGS", \ 332"FB_REGS", \ 333"SB_REGS", \ 334"CR_REGS", \ 335"R0_REGS", \ 336"R1_REGS", \ 337"R2_REGS", \ 338"R3_REGS", \ 339"R02_REGS", \ 340"HL_REGS", \ 341"QI_REGS", \ 342"R23_REGS", \ 343"R03_REGS", \ 344"DI_REGS", \ 345"A0_REGS", \ 346"A1_REGS", \ 347"A_REGS", \ 348"AD_REGS", \ 349"PS_REGS", \ 350"SI_REGS", \ 351"HI_REGS", \ 352"RA_REGS", \ 353"GENERAL_REGS", \ 354"FLG_REGS", \ 355"HC_REGS", \ 356"MEM_REGS", \ 357"R02_A_MEM_REGS", \ 358"A_HL_MEM_REGS", \ 359"R1_R3_A_MEM_REGS", \ 360"R03_MEM_REGS", \ 361"A_HI_MEM_REGS", \ 362"A_AD_CR_MEM_SI_REGS", \ 363"ALL_REGS", \ 364} 365 366#define REGNO_REG_CLASS(R) m32c_regno_reg_class (R) 367 368/* We support simple displacements off address registers, nothing else. */ 369#define BASE_REG_CLASS A_REGS 370#define INDEX_REG_CLASS NO_REGS 371 372/* We primarily use the new "long" constraint names, with the initial 373 letter classifying the constraint type and following letters 374 specifying which. The types are: 375 376 I - integer values 377 R - register classes 378 S - memory references (M was used) 379 A - addresses (currently unused) 380*/ 381 382#define CONSTRAINT_LEN(CHAR,STR) \ 383 ((CHAR) == 'I' ? 3 \ 384 : (CHAR) == 'R' ? 3 \ 385 : (CHAR) == 'S' ? 2 \ 386 : (CHAR) == 'A' ? 2 \ 387 : DEFAULT_CONSTRAINT_LEN(CHAR,STR)) 388#define REG_CLASS_FROM_CONSTRAINT(CHAR,STR) \ 389 m32c_reg_class_from_constraint (CHAR, STR) 390 391#define REGNO_OK_FOR_BASE_P(NUM) m32c_regno_ok_for_base_p (NUM) 392#define REGNO_OK_FOR_INDEX_P(NUM) 0 393 394#define PREFERRED_RELOAD_CLASS(X,CLASS) m32c_preferred_reload_class (X, CLASS) 395#define PREFERRED_OUTPUT_RELOAD_CLASS(X,CLASS) m32c_preferred_output_reload_class (X, CLASS) 396#define LIMIT_RELOAD_CLASS(MODE,CLASS) m32c_limit_reload_class (MODE, CLASS) 397 398#define SECONDARY_RELOAD_CLASS(CLASS,MODE,X) m32c_secondary_reload_class (CLASS, MODE, X) 399 400#define SMALL_REGISTER_CLASSES 1 401 402#define CLASS_LIKELY_SPILLED_P(C) m32c_class_likely_spilled_p (C) 403 404#define CLASS_MAX_NREGS(C,M) m32c_class_max_nregs (C, M) 405 406#define CANNOT_CHANGE_MODE_CLASS(F,T,C) m32c_cannot_change_mode_class(F,T,C) 407 408#define CONST_OK_FOR_CONSTRAINT_P(VALUE,C,STR) \ 409 m32c_const_ok_for_constraint_p (VALUE, C, STR) 410#define CONST_DOUBLE_OK_FOR_CONSTRAINT_P(VALUE,C,STR) 0 411#define EXTRA_CONSTRAINT_STR(VALUE,C,STR) \ 412 m32c_extra_constraint_p (VALUE, C, STR) 413#define EXTRA_MEMORY_CONSTRAINT(C,STR) \ 414 m32c_extra_memory_constraint (C, STR) 415#define EXTRA_ADDRESS_CONSTRAINT(C,STR) \ 416 m32c_extra_address_constraint (C, STR) 417 418/* STACK AND CALLING */ 419 420/* Frame Layout */ 421 422/* Standard push/pop stack, no surprises here. */ 423 424#define STACK_GROWS_DOWNWARD 1 425#define STACK_PUSH_CODE PRE_DEC 426#define FRAME_GROWS_DOWNWARD 1 427 428#define STARTING_FRAME_OFFSET 0 429#define FIRST_PARM_OFFSET(F) 0 430 431#define RETURN_ADDR_RTX(COUNT,FA) m32c_return_addr_rtx (COUNT) 432 433#define INCOMING_RETURN_ADDR_RTX m32c_incoming_return_addr_rtx() 434#define INCOMING_FRAME_SP_OFFSET (TARGET_A24 ? 4 : 3) 435 436/* Exception Handling Support */ 437 438#define EH_RETURN_DATA_REGNO(N) m32c_eh_return_data_regno (N) 439#define EH_RETURN_STACKADJ_RTX m32c_eh_return_stackadj_rtx () 440 441/* Registers That Address the Stack Frame */ 442 443#ifndef FP_REGNO 444#define FP_REGNO 7 445#endif 446#ifndef SP_REGNO 447#define SP_REGNO 8 448#endif 449#define AP_REGNO 11 450 451#define STACK_POINTER_REGNUM SP_REGNO 452#define FRAME_POINTER_REGNUM FP_REGNO 453#define ARG_POINTER_REGNUM AP_REGNO 454 455/* The static chain must be pointer-capable. */ 456#define STATIC_CHAIN_REGNUM A0_REGNO 457 458#define DWARF_FRAME_REGISTERS 20 459#define DWARF_FRAME_REGNUM(N) m32c_dwarf_frame_regnum (N) 460#define DBX_REGISTER_NUMBER(N) m32c_dwarf_frame_regnum (N) 461 462/* Eliminating Frame Pointer and Arg Pointer */ 463 464/* If the frame pointer isn't used, we detect it manually. But the 465 stack pointer doesn't have as flexible addressing as the frame 466 pointer, so we always assume we have it. */ 467#define FRAME_POINTER_REQUIRED 1 468 469#define ELIMINABLE_REGS \ 470 {{AP_REGNO, SP_REGNO}, \ 471 {AP_REGNO, FB_REGNO}, \ 472 {FB_REGNO, SP_REGNO}} 473 474#define CAN_ELIMINATE(FROM,TO) 1 475#define INITIAL_ELIMINATION_OFFSET(FROM,TO,VAR) \ 476 (VAR) = m32c_initial_elimination_offset(FROM,TO) 477 478/* Passing Function Arguments on the Stack */ 479 480#define PUSH_ARGS 1 481#define PUSH_ROUNDING(N) m32c_push_rounding (N) 482#define RETURN_POPS_ARGS(D,T,S) 0 483#define CALL_POPS_ARGS(C) 0 484 485/* Passing Arguments in Registers */ 486 487#define FUNCTION_ARG(CA,MODE,TYPE,NAMED) \ 488 m32c_function_arg (&(CA),MODE,TYPE,NAMED) 489 490typedef struct m32c_cumulative_args 491{ 492 /* For address of return value buffer (structures are returned by 493 passing the address of a buffer as an invisible first argument. 494 This identifies it). If set, the current parameter will be put 495 on the stack, regardless of type. */ 496 int force_mem; 497 /* First parm is 1, parm 0 is hidden pointer for returning 498 aggregates. */ 499 int parm_num; 500} m32c_cumulative_args; 501 502#define CUMULATIVE_ARGS m32c_cumulative_args 503#define INIT_CUMULATIVE_ARGS(CA,FNTYPE,LIBNAME,FNDECL,N_NAMED_ARGS) \ 504 m32c_init_cumulative_args (&(CA),FNTYPE,LIBNAME,FNDECL,N_NAMED_ARGS) 505#define FUNCTION_ARG_ADVANCE(CA,MODE,TYPE,NAMED) \ 506 m32c_function_arg_advance (&(CA),MODE,TYPE,NAMED) 507#define FUNCTION_ARG_BOUNDARY(MODE,TYPE) (TARGET_A16 ? 8 : 16) 508#define FUNCTION_ARG_REGNO_P(r) m32c_function_arg_regno_p (r) 509 510/* How Scalar Function Values Are Returned */ 511 512#define FUNCTION_VALUE(VT,F) m32c_function_value (VT, F) 513#define LIBCALL_VALUE(MODE) m32c_libcall_value (MODE) 514 515#define FUNCTION_VALUE_REGNO_P(r) ((r) == R0_REGNO || (r) == MEM0_REGNO) 516 517/* How Large Values Are Returned */ 518 519#define DEFAULT_PCC_STRUCT_RETURN 1 520 521/* Function Entry and Exit */ 522 523#define EXIT_IGNORE_STACK 0 524#define EPILOGUE_USES(REGNO) m32c_epilogue_uses(REGNO) 525#define EH_USES(REGNO) 0 /* FIXME */ 526 527/* Generating Code for Profiling */ 528 529#define FUNCTION_PROFILER(FILE,LABELNO) 530 531/* Implementing the Varargs Macros */ 532 533/* Trampolines for Nested Functions */ 534 535#define TRAMPOLINE_SIZE m32c_trampoline_size () 536#define TRAMPOLINE_ALIGNMENT m32c_trampoline_alignment () 537#define INITIALIZE_TRAMPOLINE(a,fn,sc) m32c_initialize_trampoline (a, fn, sc) 538 539/* Addressing Modes */ 540 541#define HAVE_PRE_DECREMENT 1 542#define HAVE_POST_INCREMENT 1 543#define CONSTANT_ADDRESS_P(X) CONSTANT_P(X) 544#define MAX_REGS_PER_ADDRESS 1 545 546/* This is passed to the macros below, so that they can be implemented 547 in m32c.c. */ 548#ifdef REG_OK_STRICT 549#define REG_OK_STRICT_V 1 550#else 551#define REG_OK_STRICT_V 0 552#endif 553 554#define GO_IF_LEGITIMATE_ADDRESS(MODE,X,LABEL) \ 555 if (m32c_legitimate_address_p (MODE, X, REG_OK_STRICT_V)) \ 556 goto LABEL; 557 558#define REG_OK_FOR_BASE_P(X) m32c_reg_ok_for_base_p (X, REG_OK_STRICT_V) 559#define REG_OK_FOR_INDEX_P(X) 0 560 561/* #define FIND_BASE_TERM(X) when we do unspecs for symrefs */ 562 563#define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \ 564 if (m32c_legitimize_address(&(X),OLDX,MODE)) \ 565 goto win; 566 567#define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \ 568 if (m32c_legitimize_reload_address(&(X),MODE,OPNUM,TYPE,IND_LEVELS)) \ 569 goto win; 570 571#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \ 572 if (m32c_mode_dependent_address (ADDR)) \ 573 goto LABEL; 574 575#define LEGITIMATE_CONSTANT_P(X) m32c_legitimate_constant_p (X) 576 577/* Condition Code Status */ 578 579#define REVERSIBLE_CC_MODE(MODE) 1 580 581/* Describing Relative Costs of Operations */ 582 583#define REGISTER_MOVE_COST(MODE,FROM,TO) \ 584 m32c_register_move_cost (MODE, FROM, TO) 585#define MEMORY_MOVE_COST(MODE,CLASS,IN) \ 586 m32c_memory_move_cost (MODE, CLASS, IN) 587 588/* Dividing the Output into Sections (Texts, Data, ...) */ 589 590#define TEXT_SECTION_ASM_OP ".text" 591#define DATA_SECTION_ASM_OP ".data" 592#define BSS_SECTION_ASM_OP ".bss" 593 594#define CTOR_LIST_BEGIN 595#define CTOR_LIST_END 596#define DTOR_LIST_BEGIN 597#define DTOR_LIST_END 598#define CTORS_SECTION_ASM_OP "\t.section\t.init_array,\"aw\",%init_array" 599#define DTORS_SECTION_ASM_OP "\t.section\t.fini_array,\"aw\",%fini_array" 600#define INIT_ARRAY_SECTION_ASM_OP "\t.section\t.init_array,\"aw\",%init_array" 601#define FINI_ARRAY_SECTION_ASM_OP "\t.section\t.fini_array,\"aw\",%fini_array" 602 603/* The Overall Framework of an Assembler File */ 604 605#define ASM_COMMENT_START ";" 606#define ASM_APP_ON "" 607#define ASM_APP_OFF "" 608 609/* Output and Generation of Labels */ 610 611#define GLOBAL_ASM_OP "\t.global\t" 612 613/* Output of Assembler Instructions */ 614 615#define REGISTER_NAMES { \ 616 "r0", "r2", "r1", "r3", \ 617 "a0", "a1", "sb", "fb", "sp", \ 618 "pc", "flg", "argp", \ 619 "mem0", "mem2", "mem4", "mem6", "mem8", "mem10", "mem12", "mem14", \ 620} 621 622#define ADDITIONAL_REGISTER_NAMES { \ 623 {"r0l", 0}, \ 624 {"r1l", 2}, \ 625 {"r0r2", 0}, \ 626 {"r1r3", 2}, \ 627 {"a0a1", 4}, \ 628 {"r0r2r1r3", 0} } 629 630#define PRINT_OPERAND(S,X,C) m32c_print_operand (S, X, C) 631#define PRINT_OPERAND_PUNCT_VALID_P(C) m32c_print_operand_punct_valid_p (C) 632#define PRINT_OPERAND_ADDRESS(S,X) m32c_print_operand_address (S, X) 633 634#undef USER_LABEL_PREFIX 635#define USER_LABEL_PREFIX "_" 636 637#define ASM_OUTPUT_REG_PUSH(S,R) m32c_output_reg_push (S, R) 638#define ASM_OUTPUT_REG_POP(S,R) m32c_output_reg_pop (S, R) 639 640/* Output of Dispatch Tables */ 641 642#define ASM_OUTPUT_ADDR_VEC_ELT(S,V) \ 643 fprintf (S, "\t.word L%d\n", V) 644 645/* Assembler Commands for Exception Regions */ 646 647#define DWARF_CIE_DATA_ALIGNMENT -1 648 649/* Assembler Commands for Alignment */ 650 651#define ASM_OUTPUT_ALIGN(STREAM,POWER) \ 652 fprintf (STREAM, "\t.p2align\t%d\n", POWER); 653 654/* Controlling Debugging Information Format */ 655 656#define DWARF2_ADDR_SIZE 4 657 658/* Miscellaneous Parameters */ 659 660#define HAS_LONG_COND_BRANCH false 661#define HAS_LONG_UNCOND_BRANCH true 662#define CASE_VECTOR_MODE SImode 663#define LOAD_EXTEND_OP(MEM) ZERO_EXTEND 664 665#define MOVE_MAX 4 666#define TRULY_NOOP_TRUNCATION(op,ip) 1 667 668#define STORE_FLAG_VALUE 1 669 670/* 16 or 24 bit pointers */ 671#define Pmode (TARGET_A16 ? HImode : PSImode) 672#define FUNCTION_MODE QImode 673 674#define REGISTER_TARGET_PRAGMAS() m32c_register_pragmas() 675 676#endif 677