rc.conf revision 1.70
1#!/bin/sh - 2# 3# $OpenBSD: rc.conf,v 1.70 2001/10/12 22:40:58 jakob Exp $ 4 5# set these to "NO" to turn them off. otherwise, they're used as flags 6routed_flags=NO # for normal use: "-q" 7altqd_flags=NO # for normal use: "" 8mrouted_flags=NO # for normal use: "", if activated 9 # be sure to enable multicast_router below. 10rarpd_flags=NO # for normal use: "-a" 11bootparamd_flags=NO # for normal use: "" 12rbootd_flags=NO # for normal use: "" 13sshd_flags="" # for normal use: "" 14smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8) 15 # and sendmail(8) to use MSA only 16named_flags=NO # for normal use: "" 17rdate_flags=NO # for normal use: name of RFC868 timeserver 18timed_flags=NO # for normal use: "" 19ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts 20photurisd_flags=NO # for normal use: "" 21isakmpd_flags=NO # for normal use: "" 22mopd_flags=NO # for normal use: "-a" 23httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8)) 24apmd_flags=NO # for normal use: "" 25dhcpd_flags=NO # for normal use: "-q" 26rtadvd_flags=NO # for normal use: list of interfaces 27 # be sure to set net.inet6.ip6.forwarding=1 28route6d_flags=NO # for normal use: "" 29 # be sure to set net.inet6.ip6.forwarding=1 30rtsold_flags=NO # for normal use: interface 31 # be sure to set net.inet6.ip6.forwarding=0 32 # be sure to set net.inet6.ip6.accept_rtadv=1 33lpd_flags=NO # for normal use: "" (or "-l" for debugging) 34 35# For normal use: "-L sm-mta -bd -q30m" 36sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m" 37 38# Set to NO if ftpd is running out of inetd 39ftpd_flags=NO # for non-inetd use: "-D" 40 41# Set to NO if identd is running out of inetd 42identd_flags=NO # for non-inetd use: "-b -u nobody -elo" 43 44# On some architectures, you must also disable console getty in /etc/ttys 45xdm_flags=NO # for normal use: "" 46 47# For enabling console mouse support (i386 architecture only) 48wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00" 49 50# set the following to "YES" to turn them on 51rwhod=NO 52nfs_server=NO # see sysctl.conf for nfs client configuration 53lockd=NO 54gated=NO 55amd=NO 56pf=NO # Packet filter / NAT 57portmap=YES # almost always needed 58inetd=YES # almost always needed 59check_quotas=YES # NO may be desirable in some YP environments 60ntpd=YES # run ntpd if it exists 61 62krb4_server_kdc=NO # kerberos server. run 'info kth-krb' for assistance. 63krb4_slave_kdc=NO # kerberos slave server. 64krb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help. 65krb5_slave_kdc=NO # KerberosV slave KDC. 66afs=NO # mount and run afs 67 68# Multicast routing configuration 69# Please look at /etc/netstart for a detailed description if you change these 70multicast_host=NO # Route all multicast packets to a single interface 71multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted 72 73# miscellaneous other flags 74# only used if the appropriate server is marked YES above 75gated_flags= 76ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc 77yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp 78nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver 79amd_dir=/tmp_mnt # AMD's mount directory 80amd_master=/etc/amd/master # AMD 'master' map 81syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log" 82named_user=named # Named should not run as root unless necessary 83named_chroot=/var/named # Where to chroot named if not empty 84pf_rules=/etc/pf.conf # Packet filter rules file 85nat_rules=/etc/nat.conf # NAT rules file 86pflogd_flags= # add more flags, ie. "-s 256" 87afs_mount_point=/afs # Mountpoint for AFS 88afs_device=/dev/xfs0 # Device used by afsd 89afsd_flags=-z # Flags passed to afsd 90shlib_dirs= # extra directories for ldconfig 91 92local_rcconf="/etc/rc.conf.local" 93 94[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line 95