1/*
2 * upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines
3 *
4 * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version 2
9 * of the License, or (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
19 */
20
21#ifndef _UPD64083_H_
22#define _UPD64083_H_
23
24/* There are two bits of information that the driver needs in order
25   to select the correct routing: the operating mode and the selection
26   of the Y input (external or internal).
27
28   The first two operating modes expect a composite signal on the Y input,
29   the second two operating modes use both the Y and C inputs.
30
31   Normally YCS_MODE is used for tuner and composite inputs, and the
32   YCNR mode is used for S-Video inputs.
33
34   The external Y-ADC is selected when the composite input comes from a
35   upd64031a ghost reduction device. If this device is not present, or
36   the input is a S-Video signal, then the internal Y-ADC input should
37   be used. */
38
39/* Operating modes: */
40
41/* YCS mode: Y/C separation (burst locked clocking) */
42#define UPD64083_YCS_MODE      0
43/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */
44#define UPD64083_YCS_PLUS_MODE 1
45
46/* Note: the following two modes cannot be used in combination with the
47   external Y-ADC. */
48/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */
49#define UPD64083_MNNR_MODE     2
50/* YCNR mode: frame recursive YCNR (burst locked clocking) */
51#define UPD64083_YCNR_MODE     3
52
53/* Select external Y-ADC: this should be set if this device is used in
54   combination with the upd64031a ghost reduction device.
55   Otherwise leave at 0 (use internal Y-ADC). */
56#define UPD64083_EXT_Y_ADC     (1 << 2)
57
58#endif
59