1/* 2 * pci_regs.h 3 * 4 * PCI standard defines 5 * Copyright 1994, Drew Eckhardt 6 * Copyright 1997--1999 Martin Mares <mj@ucw.cz> 7 * 8 * For more information, please consult the following manuals (look at 9 * http://www.pcisig.com/ for how to get them): 10 * 11 * PCI BIOS Specification 12 * PCI Local Bus Specification 13 * PCI to PCI Bridge Specification 14 * PCI System Design Guide 15 * 16 * For hypertransport information, please consult the following manuals 17 * from http://www.hypertransport.org 18 * 19 * The Hypertransport I/O Link Specification 20 */ 21 22#ifndef LINUX_PCI_REGS_H 23#define LINUX_PCI_REGS_H 24 25/* 26 * Under PCI, each device has 256 bytes of configuration address space, 27 * of which the first 64 bytes are standardized as follows: 28 */ 29#define PCI_VENDOR_ID 0x00 /* 16 bits */ 30#define PCI_DEVICE_ID 0x02 /* 16 bits */ 31#define PCI_COMMAND 0x04 /* 16 bits */ 32#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ 33#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ 34#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ 35#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ 36#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ 37#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ 38#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ 39#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ 40#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ 41#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ 42#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ 43 44#define PCI_STATUS 0x06 /* 16 bits */ 45#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ 46#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ 47#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ 48#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ 49#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ 50#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ 51#define PCI_STATUS_DEVSEL_FAST 0x000 52#define PCI_STATUS_DEVSEL_MEDIUM 0x200 53#define PCI_STATUS_DEVSEL_SLOW 0x400 54#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ 55#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ 56#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ 57#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ 58#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ 59 60#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ 61#define PCI_REVISION_ID 0x08 /* Revision ID */ 62#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ 63#define PCI_CLASS_DEVICE 0x0a /* Device class */ 64 65#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ 66#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ 67#define PCI_HEADER_TYPE 0x0e /* 8 bits */ 68#define PCI_HEADER_TYPE_NORMAL 0 69#define PCI_HEADER_TYPE_BRIDGE 1 70#define PCI_HEADER_TYPE_CARDBUS 2 71 72#define PCI_BIST 0x0f /* 8 bits */ 73#define PCI_BIST_CODE_MASK 0x0f /* Return result */ 74#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ 75#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ 76 77/* 78 * Base addresses specify locations in memory or I/O space. 79 * Decoded size can be determined by writing a value of 80 * 0xffffffff to the register, and reading it back. Only 81 * 1 bits are decoded. 82 */ 83#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ 84#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ 85#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ 86#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ 87#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ 88#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ 89#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ 90#define PCI_BASE_ADDRESS_SPACE_IO 0x01 91#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 92#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 93#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ 94#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ 95#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ 96#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ 97#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) 98#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) 99/* bit 1 is reserved if address_space = 1 */ 100 101/* Header type 0 (normal devices) */ 102#define PCI_CARDBUS_CIS 0x28 103#define PCI_SUBSYSTEM_VENDOR_ID 0x2c 104#define PCI_SUBSYSTEM_ID 0x2e 105#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ 106#define PCI_ROM_ADDRESS_ENABLE 0x01 107#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) 108 109#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ 110 111/* 0x35-0x3b are reserved */ 112#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ 113#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ 114#define PCI_MIN_GNT 0x3e /* 8 bits */ 115#define PCI_MAX_LAT 0x3f /* 8 bits */ 116 117/* Header type 1 (PCI-to-PCI bridges) */ 118#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ 119#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ 120#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ 121#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ 122#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ 123#define PCI_IO_LIMIT 0x1d 124#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ 125#define PCI_IO_RANGE_TYPE_16 0x00 126#define PCI_IO_RANGE_TYPE_32 0x01 127#define PCI_IO_RANGE_MASK (~0x0fUL) 128#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ 129#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ 130#define PCI_MEMORY_LIMIT 0x22 131#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL 132#define PCI_MEMORY_RANGE_MASK (~0x0fUL) 133#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ 134#define PCI_PREF_MEMORY_LIMIT 0x26 135#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL 136#define PCI_PREF_RANGE_TYPE_32 0x00 137#define PCI_PREF_RANGE_TYPE_64 0x01 138#define PCI_PREF_RANGE_MASK (~0x0fUL) 139#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ 140#define PCI_PREF_LIMIT_UPPER32 0x2c 141#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ 142#define PCI_IO_LIMIT_UPPER16 0x32 143/* 0x34 same as for htype 0 */ 144/* 0x35-0x3b is reserved */ 145#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ 146/* 0x3c-0x3d are same as for htype 0 */ 147#define PCI_BRIDGE_CONTROL 0x3e 148#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ 149#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ 150#define PCI_BRIDGE_CTL_NO_ISA 0x04 /* Disable bridging of ISA ports */ 151#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ 152#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ 153#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ 154#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ 155 156/* Header type 2 (CardBus bridges) */ 157#define PCI_CB_CAPABILITY_LIST 0x14 158/* 0x15 reserved */ 159#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ 160#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ 161#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ 162#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ 163#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ 164#define PCI_CB_MEMORY_BASE_0 0x1c 165#define PCI_CB_MEMORY_LIMIT_0 0x20 166#define PCI_CB_MEMORY_BASE_1 0x24 167#define PCI_CB_MEMORY_LIMIT_1 0x28 168#define PCI_CB_IO_BASE_0 0x2c 169#define PCI_CB_IO_BASE_0_HI 0x2e 170#define PCI_CB_IO_LIMIT_0 0x30 171#define PCI_CB_IO_LIMIT_0_HI 0x32 172#define PCI_CB_IO_BASE_1 0x34 173#define PCI_CB_IO_BASE_1_HI 0x36 174#define PCI_CB_IO_LIMIT_1 0x38 175#define PCI_CB_IO_LIMIT_1_HI 0x3a 176#define PCI_CB_IO_RANGE_MASK (~0x03UL) 177/* 0x3c-0x3d are same as for htype 0 */ 178#define PCI_CB_BRIDGE_CONTROL 0x3e 179#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ 180#define PCI_CB_BRIDGE_CTL_SERR 0x02 181#define PCI_CB_BRIDGE_CTL_ISA 0x04 182#define PCI_CB_BRIDGE_CTL_VGA 0x08 183#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 184#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ 185#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ 186#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ 187#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 188#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 189#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 190#define PCI_CB_SUBSYSTEM_ID 0x42 191#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ 192/* 0x48-0x7f reserved */ 193 194/* Capability lists */ 195 196#define PCI_CAP_LIST_ID 0 /* Capability ID */ 197#define PCI_CAP_ID_PM 0x01 /* Power Management */ 198#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ 199#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ 200#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ 201#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ 202#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ 203#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ 204#define PCI_CAP_ID_HT 0x08 /* HyperTransport */ 205#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific capability */ 206#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ 207#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ 208#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ 209#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ 210#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ 211#define PCI_CAP_SIZEOF 4 212 213/* Power Management Registers */ 214 215#define PCI_PM_PMC 2 /* PM Capabilities Register */ 216#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ 217#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ 218#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ 219#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ 220#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxilliary power support mask */ 221#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ 222#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ 223#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ 224#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ 225#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ 226#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ 227#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ 228#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ 229#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ 230#define PCI_PM_CTRL 4 /* PM control and status register */ 231#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ 232#define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */ 233#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ 234#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ 235#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ 236#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ 237#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ 238#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ 239#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ 240#define PCI_PM_DATA_REGISTER 7 /* (??) */ 241#define PCI_PM_SIZEOF 8 242 243/* AGP registers */ 244 245#define PCI_AGP_VERSION 2 /* BCD version number */ 246#define PCI_AGP_RFU 3 /* Rest of capability flags */ 247#define PCI_AGP_STATUS 4 /* Status register */ 248#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ 249#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ 250#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ 251#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ 252#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ 253#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ 254#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ 255#define PCI_AGP_COMMAND 8 /* Control register */ 256#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ 257#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ 258#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ 259#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ 260#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ 261#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ 262#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ 263#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ 264#define PCI_AGP_SIZEOF 12 265 266/* Vital Product Data */ 267 268#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ 269#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ 270#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ 271#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ 272 273/* Slot Identification */ 274 275#define PCI_SID_ESR 2 /* Expansion Slot Register */ 276#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ 277#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ 278#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ 279 280/* Message Signalled Interrupts registers */ 281 282#define PCI_MSI_FLAGS 2 /* Various flags */ 283#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ 284#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ 285#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ 286#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ 287#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ 288#define PCI_MSI_RFU 3 /* Rest of capability flags */ 289#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ 290#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ 291#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ 292#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ 293#define PCI_MSI_MASK_BIT 16 /* Mask bits register */ 294 295/* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */ 296#define PCI_MSIX_FLAGS 2 297#define PCI_MSIX_FLAGS_QSIZE 0x7FF 298#define PCI_MSIX_FLAGS_ENABLE (1 << 15) 299#define PCI_MSIX_FLAGS_MASKALL (1 << 14) 300#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) 301#define PCI_MSIX_FLAGS_BITMASK (1 << 0) 302 303/* CompactPCI Hotswap Register */ 304 305#define PCI_CHSWP_CSR 2 /* Control and Status Register */ 306#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ 307#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ 308#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ 309#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ 310#define PCI_CHSWP_PI 0x30 /* Programming Interface */ 311#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ 312#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ 313 314/* PCI-X registers */ 315 316#define PCI_X_CMD 2 /* Modes & Features */ 317#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ 318#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ 319#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ 320#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ 321#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ 322#define PCI_X_STATUS 4 /* PCI-X capabilities */ 323#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ 324#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ 325#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ 326#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ 327#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ 328#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ 329#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ 330#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ 331#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ 332#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ 333#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ 334#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ 335#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ 336 337/* PCI Express capability registers */ 338 339#define PCI_EXP_FLAGS 2 /* Capabilities register */ 340#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ 341#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ 342#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ 343#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ 344#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ 345#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ 346#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ 347#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ 348#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ 349#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ 350#define PCI_EXP_DEVCAP 4 /* Device capabilities */ 351#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ 352#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ 353#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ 354#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ 355#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ 356#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ 357#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ 358#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ 359#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ 360#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ 361#define PCI_EXP_DEVCTL 8 /* Device Control */ 362#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ 363#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ 364#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ 365#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ 366#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ 367#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ 368#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ 369#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ 370#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ 371#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ 372#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ 373#define PCI_EXP_DEVSTA 10 /* Device Status */ 374#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ 375#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ 376#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ 377#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ 378#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ 379#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ 380#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ 381#define PCI_EXP_LNKCTL 16 /* Link Control */ 382#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ 383#define PCI_EXP_LNKSTA 18 /* Link Status */ 384#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ 385#define PCI_EXP_SLTCTL 24 /* Slot Control */ 386#define PCI_EXP_SLTSTA 26 /* Slot Status */ 387#define PCI_EXP_RTCTL 28 /* Root Control */ 388#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ 389#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ 390#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ 391#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ 392#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ 393#define PCI_EXP_RTCAP 30 /* Root Capabilities */ 394#define PCI_EXP_RTSTA 32 /* Root Status */ 395 396/* Extended Capabilities (PCI-X 2.0 and Express) */ 397#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) 398#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) 399#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) 400 401#define PCI_EXT_CAP_ID_ERR 1 402#define PCI_EXT_CAP_ID_VC 2 403#define PCI_EXT_CAP_ID_DSN 3 404#define PCI_EXT_CAP_ID_PWR 4 405 406/* Advanced Error Reporting */ 407#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ 408#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ 409#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ 410#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ 411#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ 412#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ 413#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ 414#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ 415#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ 416#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ 417#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ 418#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ 419#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ 420 /* Same bits as above */ 421#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ 422 /* Same bits as above */ 423#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ 424#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ 425#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ 426#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ 427#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ 428#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ 429#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ 430 /* Same bits as above */ 431#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ 432#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ 433#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ 434#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ 435#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ 436#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ 437#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ 438#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ 439/* Correctable Err Reporting Enable */ 440#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 441/* Non-fatal Err Reporting Enable */ 442#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 443/* Fatal Err Reporting Enable */ 444#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 445#define PCI_ERR_ROOT_STATUS 48 446#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ 447/* Multi ERR_COR Received */ 448#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 449/* ERR_FATAL/NONFATAL Recevied */ 450#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 451/* Multi ERR_FATAL/NONFATAL Recevied */ 452#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 453#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ 454#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ 455#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ 456#define PCI_ERR_ROOT_COR_SRC 52 457#define PCI_ERR_ROOT_SRC 54 458 459/* Virtual Channel */ 460#define PCI_VC_PORT_REG1 4 461#define PCI_VC_PORT_REG2 8 462#define PCI_VC_PORT_CTRL 12 463#define PCI_VC_PORT_STATUS 14 464#define PCI_VC_RES_CAP 16 465#define PCI_VC_RES_CTRL 20 466#define PCI_VC_RES_STATUS 26 467 468/* Power Budgeting */ 469#define PCI_PWR_DSR 4 /* Data Select Register */ 470#define PCI_PWR_DATA 8 /* Data Register */ 471#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ 472#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ 473#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ 474#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ 475#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ 476#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ 477#define PCI_PWR_CAP 12 /* Capability */ 478#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ 479 480/* 481 * Hypertransport sub capability types 482 * 483 * Unfortunately there are both 3 bit and 5 bit capability types defined 484 * in the HT spec, catering for that is a little messy. You probably don't 485 * want to use these directly, just use pci_find_ht_capability() and it 486 * will do the right thing for you. 487 */ 488#define HT_3BIT_CAP_MASK 0xE0 489#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */ 490#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */ 491 492#define HT_5BIT_CAP_MASK 0xF8 493#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */ 494#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */ 495#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */ 496#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */ 497#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */ 498#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */ 499#define HT_MSI_FLAGS 0x02 /* Offset to flags */ 500#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */ 501#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */ 502#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */ 503#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */ 504#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */ 505#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */ 506#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */ 507#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */ 508#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ 509#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ 510#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ 511 512 513#endif /* LINUX_PCI_REGS_H */ 514