1/* 2 * $Id: mtd.h,v 1.1.1.1 2007-08-03 18:53:44 Exp $ 3 * 4 * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al. 5 * 6 * Released under GPL 7 */ 8 9#ifndef __MTD_MTD_H__ 10#define __MTD_MTD_H__ 11 12#include <linux/types.h> 13#include <linux/module.h> 14#include <linux/uio.h> 15#include <linux/notifier.h> 16 17#include <linux/mtd/compatmac.h> 18#include <mtd/mtd-abi.h> 19 20#define MTD_CHAR_MAJOR 90 21#define MTD_BLOCK_MAJOR 31 22#define MAX_MTD_DEVICES 32 23 24#define MTD_ERASE_PENDING 0x01 25#define MTD_ERASING 0x02 26#define MTD_ERASE_SUSPEND 0x04 27#define MTD_ERASE_DONE 0x08 28#define MTD_ERASE_FAILED 0x10 29 30/* If the erase fails, fail_addr might indicate exactly which block failed. If 31 fail_addr = 0xffffffff, the failure was not at the device level or was not 32 specific to any particular block. */ 33struct erase_info { 34 struct mtd_info *mtd; 35 u_int32_t addr; 36 u_int32_t len; 37 u_int32_t fail_addr; 38 u_long time; 39 u_long retries; 40 u_int dev; 41 u_int cell; 42 void (*callback) (struct erase_info *self); 43 u_long priv; 44 u_char state; 45 struct erase_info *next; 46}; 47 48struct mtd_erase_region_info { 49 u_int32_t offset; /* At which this region starts, from the beginning of the MTD */ 50 u_int32_t erasesize; /* For this region */ 51 u_int32_t numblocks; /* Number of blocks of erasesize in this region */ 52 unsigned long *lockmap; /* If keeping bitmap of locks */ 53}; 54 55/* 56 * oob operation modes 57 * 58 * MTD_OOB_PLACE: oob data are placed at the given offset 59 * MTD_OOB_AUTO: oob data are automatically placed at the free areas 60 * which are defined by the ecclayout 61 * MTD_OOB_RAW: mode to read raw data+oob in one chunk. The oob data 62 * is inserted into the data. Thats a raw image of the 63 * flash contents. 64 */ 65typedef enum { 66 MTD_OOB_PLACE, 67 MTD_OOB_AUTO, 68 MTD_OOB_RAW, 69} mtd_oob_mode_t; 70 71/** 72 * struct mtd_oob_ops - oob operation operands 73 * @mode: operation mode 74 * 75 * @len: number of data bytes to write/read 76 * 77 * @retlen: number of data bytes written/read 78 * 79 * @ooblen: number of oob bytes to write/read 80 * @oobretlen: number of oob bytes written/read 81 * @ooboffs: offset of oob data in the oob area (only relevant when 82 * mode = MTD_OOB_PLACE) 83 * @datbuf: data buffer - if NULL only oob data are read/written 84 * @oobbuf: oob data buffer 85 * 86 * Note, it is allowed to read more then one OOB area at one go, but not write. 87 * The interface assumes that the OOB write requests program only one page's 88 * OOB area. 89 */ 90struct mtd_oob_ops { 91 mtd_oob_mode_t mode; 92 size_t len; 93 size_t retlen; 94 size_t ooblen; 95 size_t oobretlen; 96 uint32_t ooboffs; 97 uint8_t *datbuf; 98 uint8_t *oobbuf; 99}; 100 101struct mtd_info { 102 u_char type; 103 u_int32_t flags; 104 u_int32_t size; // Total size of the MTD 105 106 /* "Major" erase size for the device. Na��ve users may take this 107 * to be the only erase size available, or may use the more detailed 108 * information below if they desire 109 */ 110 u_int32_t erasesize; 111 /* Minimal writable flash unit size. In case of NOR flash it is 1 (even 112 * though individual bits can be cleared), in case of NAND flash it is 113 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR 114 * it is of ECC block size, etc. It is illegal to have writesize = 0. 115 * Any driver registering a struct mtd_info must ensure a writesize of 116 * 1 or larger. 117 */ 118 u_int32_t writesize; 119 120 u_int32_t oobsize; // Amount of OOB data per block (e.g. 16) 121 u_int32_t oobavail; // Available OOB bytes per block 122 123 // Kernel-only stuff starts here. 124 char *name; 125 int index; 126 127#ifdef CONFIG_BCM47XX 128 struct mutex *mutex; 129#endif 130 /* ecc layout structure pointer - read only ! */ 131 struct nand_ecclayout *ecclayout; 132 133 /* Data for variable erase regions. If numeraseregions is zero, 134 * it means that the whole device has erasesize as given above. 135 */ 136 int numeraseregions; 137 struct mtd_erase_region_info *eraseregions; 138 139 int (*erase) (struct mtd_info *mtd, struct erase_info *instr); 140 141 /* This stuff for eXecute-In-Place */ 142 int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); 143 144 /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ 145 void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); 146 147 148 int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); 149 int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); 150 151 int (*read_oob) (struct mtd_info *mtd, loff_t from, 152 struct mtd_oob_ops *ops); 153 int (*write_oob) (struct mtd_info *mtd, loff_t to, 154 struct mtd_oob_ops *ops); 155 156 /* 157 * Methods to access the protection register area, present in some 158 * flash devices. The user data is one time programmable but the 159 * factory data is read only. 160 */ 161 int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); 162 int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); 163 int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); 164 int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); 165 int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); 166 int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); 167 168 /* kvec-based read/write methods. 169 NB: The 'count' parameter is the number of _vectors_, each of 170 which contains an (ofs, len) tuple. 171 */ 172 int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); 173 174 /* Sync */ 175 void (*sync) (struct mtd_info *mtd); 176 177 /* Chip-supported device locking */ 178 int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len); 179 int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len); 180 181 /* Power Management functions */ 182 int (*suspend) (struct mtd_info *mtd); 183 void (*resume) (struct mtd_info *mtd); 184 185 /* Bad block management functions */ 186 int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); 187 int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); 188 189 struct notifier_block reboot_notifier; /* default mode before reboot */ 190 191 /* ECC status information */ 192 struct mtd_ecc_stats ecc_stats; 193 /* Subpage shift (NAND) */ 194 int subpage_sft; 195 196 void *priv; 197 198 struct module *owner; 199 int usecount; 200 201 /* If the driver is something smart, like UBI, it may need to maintain 202 * its own reference counting. The below functions are only for driver. 203 * The driver may register its callbacks. These callbacks are not 204 * supposed to be called by MTD users */ 205 int (*get_device) (struct mtd_info *mtd); 206 void (*put_device) (struct mtd_info *mtd); 207}; 208 209 210 /* Kernel-side ioctl definitions */ 211 212extern int add_mtd_device(struct mtd_info *mtd); 213extern int del_mtd_device (struct mtd_info *mtd); 214 215extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); 216extern struct mtd_info *get_mtd_device_nm(const char *name); 217 218extern void put_mtd_device(struct mtd_info *mtd); 219 220 221struct mtd_notifier { 222 void (*add)(struct mtd_info *mtd); 223 void (*remove)(struct mtd_info *mtd); 224 struct list_head list; 225}; 226 227 228extern void register_mtd_user (struct mtd_notifier *new); 229extern int unregister_mtd_user (struct mtd_notifier *old); 230 231int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, 232 unsigned long count, loff_t to, size_t *retlen); 233 234int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, 235 unsigned long count, loff_t from, size_t *retlen); 236 237#ifdef CONFIG_MTD_PARTITIONS 238void mtd_erase_callback(struct erase_info *instr); 239#else 240static inline void mtd_erase_callback(struct erase_info *instr) 241{ 242 if (instr->callback) 243 instr->callback(instr); 244} 245#endif 246 247/* 248 * Debugging macro and defines 249 */ 250#define MTD_DEBUG_LEVEL0 (0) /* Quiet */ 251#define MTD_DEBUG_LEVEL1 (1) /* Audible */ 252#define MTD_DEBUG_LEVEL2 (2) /* Loud */ 253#define MTD_DEBUG_LEVEL3 (3) /* Noisy */ 254 255#ifdef CONFIG_MTD_DEBUG 256#define DEBUG(n, args...) \ 257 do { \ 258 if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ 259 printk(KERN_INFO args); \ 260 } while(0) 261#else /* CONFIG_MTD_DEBUG */ 262#define DEBUG(n, args...) do { } while(0) 263 264#endif /* CONFIG_MTD_DEBUG */ 265 266#endif /* __MTD_MTD_H__ */ 267