1/* $Id: bbc.h,v 1.1.1.1 2007/08/03 18:53:36 Exp $ 2 * bbc.h: Defines for BootBus Controller found on UltraSPARC-III 3 * systems. 4 * 5 * Copyright (C) 2000 David S. Miller (davem@redhat.com) 6 */ 7 8#ifndef _SPARC64_BBC_H 9#define _SPARC64_BBC_H 10 11/* Register sizes are indicated by "B" (Byte, 1-byte), 12 * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or 13 * "Q" (Quad, 8 bytes) inside brackets. 14 */ 15 16#define BBC_AID 0x00 /* [B] Agent ID */ 17#define BBC_DEVP 0x01 /* [B] Device Present */ 18#define BBC_ARB 0x02 /* [B] Arbitration */ 19#define BBC_QUIESCE 0x03 /* [B] Quiesce */ 20#define BBC_WDACTION 0x04 /* [B] Watchdog Action */ 21#define BBC_SPG 0x06 /* [B] Soft POR Gen */ 22#define BBC_SXG 0x07 /* [B] Soft XIR Gen */ 23#define BBC_PSRC 0x08 /* [W] POR Source */ 24#define BBC_XSRC 0x0c /* [B] XIR Source */ 25#define BBC_CSC 0x0d /* [B] Clock Synthesizers Control*/ 26#define BBC_ES_CTRL 0x0e /* [H] Energy Star Control */ 27#define BBC_ES_ACT 0x10 /* [W] E* Assert Change Time */ 28#define BBC_ES_DACT 0x14 /* [B] E* De-Assert Change Time */ 29#define BBC_ES_DABT 0x15 /* [B] E* De-Assert Bypass Time */ 30#define BBC_ES_ABT 0x16 /* [H] E* Assert Bypass Time */ 31#define BBC_ES_PST 0x18 /* [W] E* PLL Settle Time */ 32#define BBC_ES_FSL 0x1c /* [W] E* Frequency Switch Latency*/ 33#define BBC_EBUST 0x20 /* [Q] EBUS Timing */ 34#define BBC_JTAG_CMD 0x28 /* [W] JTAG+ Command */ 35#define BBC_JTAG_CTRL 0x2c /* [B] JTAG+ Control */ 36#define BBC_I2C_SEL 0x2d /* [B] I2C Selection */ 37#define BBC_I2C_0_S1 0x2e /* [B] I2C ctrlr-0 reg S1 */ 38#define BBC_I2C_0_S0 0x2f /* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/ 39#define BBC_I2C_1_S1 0x30 /* [B] I2C ctrlr-1 reg S1 */ 40#define BBC_I2C_1_S0 0x31 /* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/ 41#define BBC_KBD_BEEP 0x32 /* [B] Keyboard Beep */ 42#define BBC_KBD_BCNT 0x34 /* [W] Keyboard Beep Counter */ 43 44#define BBC_REGS_SIZE 0x40 45 46/* There is a 2K scratch ram area at offset 0x80000 but I doubt 47 * we will use it for anything. 48 */ 49 50/* Agent ID register. This register shows the Safari Agent ID 51 * for the processors. The value returned depends upon which 52 * cpu is reading the register. 53 */ 54#define BBC_AID_ID 0x07 /* Safari ID */ 55#define BBC_AID_RESV 0xf8 /* Reserved */ 56 57/* Device Present register. One can determine which cpus are actually 58 * present in the machine by interrogating this register. 59 */ 60#define BBC_DEVP_CPU0 0x01 /* Processor 0 present */ 61#define BBC_DEVP_CPU1 0x02 /* Processor 1 present */ 62#define BBC_DEVP_CPU2 0x04 /* Processor 2 present */ 63#define BBC_DEVP_CPU3 0x08 /* Processor 3 present */ 64#define BBC_DEVP_RESV 0xf0 /* Reserved */ 65 66/* Arbitration register. This register is used to block access to 67 * the BBC from a particular cpu. 68 */ 69#define BBC_ARB_CPU0 0x01 /* Enable cpu 0 BBC arbitratrion */ 70#define BBC_ARB_CPU1 0x02 /* Enable cpu 1 BBC arbitratrion */ 71#define BBC_ARB_CPU2 0x04 /* Enable cpu 2 BBC arbitratrion */ 72#define BBC_ARB_CPU3 0x08 /* Enable cpu 3 BBC arbitratrion */ 73#define BBC_ARB_RESV 0xf0 /* Reserved */ 74 75/* Quiesce register. Bus and BBC segments for cpus can be disabled 76 * with this register, ie. for hot plugging. 77 */ 78#define BBC_QUIESCE_S02 0x01 /* Quiesce Safari segment for cpu 0 and 2 */ 79#define BBC_QUIESCE_S13 0x02 /* Quiesce Safari segment for cpu 1 and 3 */ 80#define BBC_QUIESCE_B02 0x04 /* Quiesce BBC segment for cpu 0 and 2 */ 81#define BBC_QUIESCE_B13 0x08 /* Quiesce BBC segment for cpu 1 and 3 */ 82#define BBC_QUIESCE_FD0 0x10 /* Disable Fatal_Error[0] reporting */ 83#define BBC_QUIESCE_FD1 0x20 /* Disable Fatal_Error[1] reporting */ 84#define BBC_QUIESCE_FD2 0x40 /* Disable Fatal_Error[2] reporting */ 85#define BBC_QUIESCE_FD3 0x80 /* Disable Fatal_Error[3] reporting */ 86 87/* Watchdog Action register. When the watchdog device timer expires 88 * a line is enabled to the BBC. The action BBC takes when this line 89 * is asserted can be controlled by this regiser. 90 */ 91#define BBC_WDACTION_RST 0x01 /* When set, watchdog causes system reset. 92 * When clear, BBC ignores watchdog signal. 93 */ 94#define BBC_WDACTION_RESV 0xfe /* Reserved */ 95 96/* Soft_POR_GEN register. The POR (Power On Reset) signal may be asserted 97 * for specific processors or all processors via this register. 98 */ 99#define BBC_SPG_CPU0 0x01 /* Assert POR for processor 0 */ 100#define BBC_SPG_CPU1 0x02 /* Assert POR for processor 1 */ 101#define BBC_SPG_CPU2 0x04 /* Assert POR for processor 2 */ 102#define BBC_SPG_CPU3 0x08 /* Assert POR for processor 3 */ 103#define BBC_SPG_CPUALL 0x10 /* Reset all processors and reset 104 * the entire system. 105 */ 106#define BBC_SPG_RESV 0xe0 /* Reserved */ 107 108/* Soft_XIR_GEN register. The XIR (eXternally Initiated Reset) signal 109 * may be asserted to specific processors via this register. 110 */ 111#define BBC_SXG_CPU0 0x01 /* Assert XIR for processor 0 */ 112#define BBC_SXG_CPU1 0x02 /* Assert XIR for processor 1 */ 113#define BBC_SXG_CPU2 0x04 /* Assert XIR for processor 2 */ 114#define BBC_SXG_CPU3 0x08 /* Assert XIR for processor 3 */ 115#define BBC_SXG_RESV 0xf0 /* Reserved */ 116 117/* POR Source register. One may identify the cause of the most recent 118 * reset by reading this register. 119 */ 120#define BBC_PSRC_SPG0 0x0001 /* CPU 0 reset via BBC_SPG register */ 121#define BBC_PSRC_SPG1 0x0002 /* CPU 1 reset via BBC_SPG register */ 122#define BBC_PSRC_SPG2 0x0004 /* CPU 2 reset via BBC_SPG register */ 123#define BBC_PSRC_SPG3 0x0008 /* CPU 3 reset via BBC_SPG register */ 124#define BBC_PSRC_SPGSYS 0x0010 /* System reset via BBC_SPG register */ 125#define BBC_PSRC_JTAG 0x0020 /* System reset via JTAG+ */ 126#define BBC_PSRC_BUTTON 0x0040 /* System reset via push-button dongle */ 127#define BBC_PSRC_PWRUP 0x0080 /* System reset via power-up */ 128#define BBC_PSRC_FE0 0x0100 /* CPU 0 reported Fatal_Error */ 129#define BBC_PSRC_FE1 0x0200 /* CPU 1 reported Fatal_Error */ 130#define BBC_PSRC_FE2 0x0400 /* CPU 2 reported Fatal_Error */ 131#define BBC_PSRC_FE3 0x0800 /* CPU 3 reported Fatal_Error */ 132#define BBC_PSRC_FE4 0x1000 /* Schizo reported Fatal_Error */ 133#define BBC_PSRC_FE5 0x2000 /* Safari device 5 reported Fatal_Error */ 134#define BBC_PSRC_FE6 0x4000 /* CPMS reported Fatal_Error */ 135#define BBC_PSRC_SYNTH 0x8000 /* System reset when on-board clock synthesizers 136 * were updated. 137 */ 138#define BBC_PSRC_WDT 0x10000 /* System reset via Super I/O watchdog */ 139#define BBC_PSRC_RSC 0x20000 /* System reset via RSC remote monitoring 140 * device 141 */ 142 143/* XIR Source register. The source of an XIR event sent to a processor may 144 * be determined via this register. 145 */ 146#define BBC_XSRC_SXG0 0x01 /* CPU 0 received XIR via Soft_XIR_GEN reg */ 147#define BBC_XSRC_SXG1 0x02 /* CPU 1 received XIR via Soft_XIR_GEN reg */ 148#define BBC_XSRC_SXG2 0x04 /* CPU 2 received XIR via Soft_XIR_GEN reg */ 149#define BBC_XSRC_SXG3 0x08 /* CPU 3 received XIR via Soft_XIR_GEN reg */ 150#define BBC_XSRC_JTAG 0x10 /* All CPUs received XIR via JTAG+ */ 151#define BBC_XSRC_W_OR_B 0x20 /* All CPUs received XIR either because: 152 * a) Super I/O watchdog fired, or 153 * b) XIR push button was activated 154 */ 155#define BBC_XSRC_RESV 0xc0 /* Reserved */ 156 157/* Clock Synthesizers Control register. This register provides the big-bang 158 * programming interface to the two clock synthesizers of the machine. 159 */ 160#define BBC_CSC_SLOAD 0x01 /* Directly connected to S_LOAD pins */ 161#define BBC_CSC_SDATA 0x02 /* Directly connected to S_DATA pins */ 162#define BBC_CSC_SCLOCK 0x04 /* Directly connected to S_CLOCK pins */ 163#define BBC_CSC_RESV 0x78 /* Reserved */ 164#define BBC_CSC_RST 0x80 /* Generate system reset when S_LOAD==1 */ 165 166/* Energy Star Control register. This register is used to generate the 167 * clock frequency change trigger to the main system devices (Schizo and 168 * the processors). The transition occurs when bits in this register 169 * go from 0 to 1, only one bit must be set at once else no action 170 * occurs. Basically the sequence of events is: 171 * a) Choose new frequency: full, 1/2 or 1/32 172 * b) Program this desired frequency into the cpus and Schizo. 173 * c) Set the same value in this register. 174 * d) 16 system clocks later, clear this register. 175 */ 176#define BBC_ES_CTRL_1_1 0x01 /* Full frequency */ 177#define BBC_ES_CTRL_1_2 0x02 /* 1/2 frequency */ 178#define BBC_ES_CTRL_1_32 0x20 /* 1/32 frequency */ 179#define BBC_ES_RESV 0xdc /* Reserved */ 180 181/* Energy Star Assert Change Time register. This determines the number 182 * of BBC clock cycles (which is half the system frequency) between 183 * the detection of FREEZE_ACK being asserted and the assertion of 184 * the CLK_CHANGE_L[2:0] signals. 185 */ 186#define BBC_ES_ACT_VAL 0xff 187 188/* Energy Star Assert Bypass Time register. This determines the number 189 * of BBC clock cycles (which is half the system frequency) between 190 * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of 191 * the ESTAR_PLL_BYPASS signal. 192 */ 193#define BBC_ES_ABT_VAL 0xffff 194 195/* Energy Star PLL Settle Time register. This determines the number of 196 * BBC clock cycles (which is half the system frequency) between the 197 * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L 198 * signal. 199 */ 200#define BBC_ES_PST_VAL 0xffffffff 201 202/* Energy Star Frequency Switch Latency register. This is the number of 203 * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first 204 * edge of the Safari clock at the new frequency. 205 */ 206#define BBC_ES_FSL_VAL 0xffffffff 207 208/* Keyboard Beep control register. This is a simple enabler for the audio 209 * beep sound. 210 */ 211#define BBC_KBD_BEEP_ENABLE 0x01 /* Enable beep */ 212#define BBC_KBD_BEEP_RESV 0xfe /* Reserved */ 213 214/* Keyboard Beep Counter register. There is a free-running counter inside 215 * the BBC which runs at half the system clock. The bit set in this register 216 * determines when the audio sound is generated. So for example if bit 217 * 10 is set, the audio beep will oscillate at 1/(2**12). The keyboard beep 218 * generator automatically selects a different bit to use if the system clock 219 * is changed via Energy Star. 220 */ 221#define BBC_KBD_BCNT_BITS 0x0007fc00 222#define BBC_KBC_BCNT_RESV 0xfff803ff 223 224#endif /* _SPARC64_BBC_H */ 225