1/* 2 * File: include/asm-blackfin/mach-bf527/defBF52x_base.h 3 * Based on: 4 * Author: 5 * 6 * Created: 7 * Description: 8 * 9 * Rev: 10 * 11 * Modified: 12 * 13 * Bugs: Enter bugs at http://blackfin.uclinux.org/ 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation; either version 2, or (at your option) 18 * any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * You should have received a copy of the GNU General Public License 26 * along with this program; see the file COPYING. 27 * If not, write to the Free Software Foundation, 28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 29 */ 30 31#ifndef _DEF_BF52X_H 32#define _DEF_BF52X_H 33 34 35/* ************************************************************** */ 36/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */ 37/* ************************************************************** */ 38 39/* ==== begin from defBF534.h ==== */ 40 41/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ 42#define PLL_CTL 0xFFC00000 /* PLL Control Register */ 43#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ 44#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ 45#define PLL_STAT 0xFFC0000C /* PLL Status Register */ 46#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ 47#define CHIPID 0xFFC00014 /* Device ID Register */ 48 49 50/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ 51#define SWRST 0xFFC00100 /* Software Reset Register */ 52#define SYSCR 0xFFC00104 /* System Configuration Register */ 53#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ 54 55#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ 56#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ 57#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ 58#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ 59#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ 60#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ 61#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ 62 63/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */ 64#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ 65#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ 66#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ 67#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ 68#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ 69#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */ 70#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ 71 72 73/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ 74#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ 75#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ 76#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ 77 78 79/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ 80#define RTC_STAT 0xFFC00300 /* RTC Status Register */ 81#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ 82#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ 83#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ 84#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ 85#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ 86#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ 87 88 89/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ 90#define UART0_THR 0xFFC00400 /* Transmit Holding register */ 91#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ 92#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ 93#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ 94#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ 95#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ 96#define UART0_LCR 0xFFC0040C /* Line Control Register */ 97#define UART0_MCR 0xFFC00410 /* Modem Control Register */ 98#define UART0_LSR 0xFFC00414 /* Line Status Register */ 99#define UART0_MSR 0xFFC00418 /* Modem Status Register */ 100#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ 101#define UART0_GCTL 0xFFC00424 /* Global Control Register */ 102 103 104/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ 105#define SPI_CTL 0xFFC00500 /* SPI Control Register */ 106#define SPI_FLG 0xFFC00504 /* SPI Flag register */ 107#define SPI_STAT 0xFFC00508 /* SPI Status register */ 108#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ 109#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ 110#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ 111#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ 112 113 114/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ 115#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ 116#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ 117#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ 118#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ 119 120#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ 121#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ 122#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ 123#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ 124 125#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ 126#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ 127#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ 128#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ 129 130#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ 131#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ 132#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ 133#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ 134 135#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ 136#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ 137#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ 138#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ 139 140#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ 141#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ 142#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ 143#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ 144 145#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ 146#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ 147#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ 148#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ 149 150#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ 151#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ 152#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ 153#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ 154 155#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ 156#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ 157#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ 158 159 160/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ 161#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ 162#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ 163#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ 164#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ 165#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ 166#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ 167#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ 168#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ 169#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ 170#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ 171#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ 172#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ 173#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ 174#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ 175#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ 176#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ 177#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ 178 179 180/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ 181#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ 182#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ 183#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ 184#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ 185#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ 186#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ 187#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ 188#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ 189#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ 190#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ 191#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ 192#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ 193#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ 194#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ 195#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ 196#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ 197#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ 198#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ 199#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ 200#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ 201#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ 202#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ 203 204 205/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ 206#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ 207#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ 208#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ 209#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ 210#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ 211#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ 212#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ 213#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ 214#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ 215#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ 216#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ 217#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ 218#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ 219#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ 220#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ 221#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ 222#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ 223#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ 224#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ 225#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ 226#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ 227#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ 228 229 230/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ 231#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ 232#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ 233#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ 234#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ 235#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ 236#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ 237#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ 238 239 240/* DMA Traffic Control Registers */ 241#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ 242#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ 243 244/* Alternate deprecated register names (below) provided for backwards code compatibility */ 245#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ 246#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ 247 248/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ 249#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ 250#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ 251#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ 252#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ 253#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ 254#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ 255#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ 256#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ 257#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ 258#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ 259#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ 260#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ 261#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ 262 263#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ 264#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ 265#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ 266#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ 267#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ 268#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ 269#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ 270#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ 271#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ 272#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ 273#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ 274#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ 275#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ 276 277#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ 278#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ 279#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ 280#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ 281#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ 282#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ 283#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ 284#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ 285#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ 286#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ 287#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ 288#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ 289#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ 290 291#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ 292#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ 293#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ 294#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ 295#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ 296#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ 297#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ 298#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ 299#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ 300#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ 301#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ 302#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ 303#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ 304 305#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ 306#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ 307#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ 308#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ 309#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ 310#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ 311#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ 312#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ 313#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ 314#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ 315#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ 316#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ 317#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ 318 319#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ 320#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ 321#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ 322#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ 323#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ 324#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ 325#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ 326#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ 327#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ 328#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ 329#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ 330#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ 331#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ 332 333#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ 334#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ 335#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ 336#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ 337#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ 338#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ 339#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ 340#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ 341#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ 342#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ 343#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ 344#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ 345#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ 346 347#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ 348#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ 349#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ 350#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ 351#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ 352#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ 353#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ 354#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ 355#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ 356#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ 357#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ 358#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ 359#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ 360 361#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ 362#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ 363#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ 364#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ 365#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ 366#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ 367#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ 368#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ 369#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ 370#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ 371#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ 372#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ 373#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ 374 375#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ 376#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ 377#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ 378#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ 379#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ 380#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ 381#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ 382#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ 383#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ 384#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ 385#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ 386#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ 387#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ 388 389#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ 390#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ 391#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ 392#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ 393#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ 394#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ 395#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ 396#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ 397#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ 398#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ 399#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ 400#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ 401#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ 402 403#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ 404#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ 405#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ 406#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ 407#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ 408#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ 409#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ 410#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ 411#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ 412#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ 413#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ 414#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ 415#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ 416 417#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ 418#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ 419#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ 420#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ 421#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ 422#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ 423#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ 424#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ 425#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ 426#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ 427#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ 428#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ 429#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ 430 431#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ 432#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ 433#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ 434#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ 435#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ 436#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ 437#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ 438#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ 439#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ 440#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ 441#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ 442#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ 443#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ 444 445#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ 446#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ 447#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ 448#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ 449#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ 450#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ 451#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ 452#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ 453#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ 454#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ 455#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ 456#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ 457#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ 458 459#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ 460#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ 461#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ 462#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ 463#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ 464#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ 465#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ 466#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ 467#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ 468#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ 469#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ 470#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ 471#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ 472 473 474/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ 475#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ 476#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ 477#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ 478#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ 479#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ 480 481 482/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ 483#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ 484#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ 485#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ 486#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ 487#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ 488#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ 489#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ 490#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ 491#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ 492#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ 493#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ 494#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ 495#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ 496#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ 497#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ 498#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ 499 500 501/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ 502#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ 503#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ 504#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ 505#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ 506#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ 507#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ 508#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ 509#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ 510#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ 511#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ 512#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ 513#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ 514#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ 515#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ 516#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ 517#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ 518#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ 519 520 521/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ 522#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ 523#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ 524#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ 525#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ 526#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ 527#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ 528#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ 529#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ 530#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ 531#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ 532#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ 533#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ 534#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ 535#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ 536#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ 537#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ 538#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ 539 540 541/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ 542#define UART1_THR 0xFFC02000 /* Transmit Holding register */ 543#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ 544#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ 545#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ 546#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ 547#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ 548#define UART1_LCR 0xFFC0200C /* Line Control Register */ 549#define UART1_MCR 0xFFC02010 /* Modem Control Register */ 550#define UART1_LSR 0xFFC02014 /* Line Status Register */ 551#define UART1_MSR 0xFFC02018 /* Modem Status Register */ 552#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ 553#define UART1_GCTL 0xFFC02024 /* Global Control Register */ 554 555 556/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */ 557 558/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ 559#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ 560#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ 561#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ 562#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ 563 564 565/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ 566#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ 567#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ 568#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ 569#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ 570#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ 571#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ 572#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ 573 574#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ 575#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ 576#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ 577#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ 578#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ 579#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ 580#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ 581 582/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ 583#define PORTF_MUX 0xFFC03210 /* Port F mux control */ 584#define PORTG_MUX 0xFFC03214 /* Port G mux control */ 585#define PORTH_MUX 0xFFC03218 /* Port H mux control */ 586#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ 587#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ 588#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ 589#define PORTF_SLEW 0xFFC03230 /* Port F slew control */ 590#define PORTG_SLEW 0xFFC03234 /* Port G slew control */ 591#define PORTH_SLEW 0xFFC03238 /* Port H slew control */ 592#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */ 593#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */ 594#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */ 595#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */ 596#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */ 597#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */ 598 599 600/*********************************************************************************** 601** System MMR Register Bits And Macros 602** 603** Disclaimer: All macros are intended to make C and Assembly code more readable. 604** Use these macros carefully, as any that do left shifts for field 605** depositing will result in the lower order bits being destroyed. Any 606** macro that shifts left to properly position the bit-field should be 607** used as part of an OR to initialize a register and NOT as a dynamic 608** modifier UNLESS the lower order bits are saved and ORed back in when 609** the macro is used. 610*************************************************************************************/ 611/* 612** ********************* PLL AND RESET MASKS ****************************************/ 613/* PLL_CTL Masks */ 614#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ 615#define PLL_OFF 0x0002 /* PLL Not Powered */ 616#define STOPCK 0x0008 /* Core Clock Off */ 617#define PDWN 0x0020 /* Enter Deep Sleep Mode */ 618#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ 619#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ 620#define BYPASS 0x0100 /* Bypass the PLL */ 621#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ 622/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ 623#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ 624 625/* PLL_DIV Masks */ 626#define SSEL 0x000F /* System Select */ 627#define CSEL 0x0030 /* Core Select */ 628#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ 629#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ 630#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ 631#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ 632/* PLL_DIV Macros */ 633#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ 634 635/* VR_CTL Masks */ 636#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ 637#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ 638#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ 639#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ 640#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ 641 642#define GAIN 0x000C /* Voltage Level Gain */ 643#define GAIN_5 0x0000 /* GAIN = 5 */ 644#define GAIN_10 0x0004 /* GAIN = 10 */ 645#define GAIN_20 0x0008 /* GAIN = 20 */ 646#define GAIN_50 0x000C /* GAIN = 50 */ 647 648#define VLEV 0x00F0 /* Internal Voltage Level */ 649#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ 650#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ 651#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ 652#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ 653#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ 654#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ 655#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ 656#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ 657#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ 658#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ 659 660#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ 661#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ 662#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ 663#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ 664#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ 665#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ 666 667/* PLL_STAT Masks */ 668#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ 669#define FULL_ON 0x0002 /* Processor In Full On Mode */ 670#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ 671#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ 672 673/* CHIPID Masks */ 674#define CHIPID_VERSION 0xF0000000 675#define CHIPID_FAMILY 0x0FFFF000 676#define CHIPID_MANUFACTURE 0x00000FFE 677 678/* SWRST Masks */ 679#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ 680#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ 681#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ 682#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ 683#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ 684 685/* SYSCR Masks */ 686#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ 687#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ 688 689 690/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ 691/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ 692#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ 693 694#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ 695#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ 696#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ 697#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ 698#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ 699#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ 700#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ 701 702#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ 703#define IRQ_TWI 0x00000200 /* TWI Interrupt */ 704#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ 705#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ 706#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ 707#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ 708#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ 709#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */ 710 711#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */ 712#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */ 713#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */ 714#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */ 715#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */ 716#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ 717#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ 718#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ 719#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */ 720#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */ 721 722#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */ 723#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */ 724#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */ 725#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */ 726#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */ 727#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */ 728#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */ 729#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */ 730#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */ 731#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ 732#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */ 733 734/* SIC_IAR0 Macros */ 735#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ 736#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ 737#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ 738#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ 739#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ 740#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ 741#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ 742#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ 743 744/* SIC_IAR1 Macros */ 745#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ 746#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ 747#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ 748#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ 749#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ 750#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ 751#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ 752#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ 753 754/* SIC_IAR2 Macros */ 755#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ 756#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ 757#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ 758#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ 759#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ 760#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ 761#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ 762#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ 763 764/* SIC_IAR3 Macros */ 765#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ 766#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ 767#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ 768#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ 769#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ 770#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ 771#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ 772#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ 773 774 775/* SIC_IMASK Masks */ 776#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ 777#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ 778#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ 779#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ 780 781/* SIC_IWR Masks */ 782#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ 783#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ 784#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ 785#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ 786 787 788/* ********* WATCHDOG TIMER MASKS ******************** */ 789 790/* Watchdog Timer WDOG_CTL Register Masks */ 791 792#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ 793#define WDEV_RESET 0x0000 /* generate reset event on roll over */ 794#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ 795#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ 796#define WDEV_NONE 0x0006 /* no event on roll over */ 797#define WDEN 0x0FF0 /* enable watchdog */ 798#define WDDIS 0x0AD0 /* disable watchdog */ 799#define WDRO 0x8000 /* watchdog rolled over latch */ 800 801/* depreciated WDOG_CTL Register Masks for legacy code */ 802 803 804#define ICTL WDEV 805#define ENABLE_RESET WDEV_RESET 806#define WDOG_RESET WDEV_RESET 807#define ENABLE_NMI WDEV_NMI 808#define WDOG_NMI WDEV_NMI 809#define ENABLE_GPI WDEV_GPI 810#define WDOG_GPI WDEV_GPI 811#define DISABLE_EVT WDEV_NONE 812#define WDOG_NONE WDEV_NONE 813 814#define TMR_EN WDEN 815#define TMR_DIS WDDIS 816#define TRO WDRO 817#define ICTL_P0 0x01 818 #define ICTL_P1 0x02 819#define TRO_P 0x0F 820 821 822 823/* *************** REAL TIME CLOCK MASKS **************************/ 824/* RTC_STAT and RTC_ALARM Masks */ 825#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ 826#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ 827#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ 828#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ 829 830/* RTC_ALARM Macro z=day y=hr x=min w=sec */ 831#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) 832 833/* RTC_ICTL and RTC_ISTAT Masks */ 834#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ 835#define ALARM 0x0002 /* Alarm Interrupt Enable */ 836#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ 837#define MINUTE 0x0008 /* Minutes Interrupt Enable */ 838#define HOUR 0x0010 /* Hours Interrupt Enable */ 839#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ 840#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ 841#define WRITE_PENDING 0x4000 /* Write Pending Status */ 842#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ 843 844/* RTC_FAST / RTC_PREN Mask */ 845#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ 846 847 848/* ************** UART CONTROLLER MASKS *************************/ 849/* UARTx_LCR Masks */ 850#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ 851#define STB 0x04 /* Stop Bits */ 852#define PEN 0x08 /* Parity Enable */ 853#define EPS 0x10 /* Even Parity Select */ 854#define STP 0x20 /* Stick Parity */ 855#define SB 0x40 /* Set Break */ 856#define DLAB 0x80 /* Divisor Latch Access */ 857 858/* UARTx_MCR Mask */ 859#define LOOP_ENA 0x10 /* Loopback Mode Enable */ 860#define LOOP_ENA_P 0x04 861 862/* UARTx_LSR Masks */ 863#define DR 0x01 /* Data Ready */ 864#define OE 0x02 /* Overrun Error */ 865#define PE 0x04 /* Parity Error */ 866#define FE 0x08 /* Framing Error */ 867#define BI 0x10 /* Break Interrupt */ 868#define THRE 0x20 /* THR Empty */ 869#define TEMT 0x40 /* TSR and UART_THR Empty */ 870 871/* UARTx_IER Masks */ 872#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ 873#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ 874#define ELSI 0x04 /* Enable RX Status Interrupt */ 875 876/* UARTx_IIR Masks */ 877#define NINT 0x01 /* Pending Interrupt */ 878#define IIR_TX_READY 0x02 /* UART_THR empty */ 879#define IIR_RX_READY 0x04 /* Receive data ready */ 880#define IIR_LINE_CHANGE 0x06 /* Receive line status */ 881#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */ 882 883/* UARTx_GCTL Masks */ 884#define UCEN 0x01 /* Enable UARTx Clocks */ 885#define IREN 0x02 /* Enable IrDA Mode */ 886#define TPOLC 0x04 /* IrDA TX Polarity Change */ 887#define RPOLC 0x08 /* IrDA RX Polarity Change */ 888#define FPE 0x10 /* Force Parity Error On Transmit */ 889#define FFE 0x20 /* Force Framing Error On Transmit */ 890 891 892/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ 893/* SPI_CTL Masks */ 894#define TIMOD 0x0003 /* Transfer Initiate Mode */ 895#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ 896#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ 897#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ 898#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ 899#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ 900#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ 901#define PSSE 0x0010 /* Slave-Select Input Enable */ 902#define EMISO 0x0020 /* Enable MISO As Output */ 903#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ 904#define LSBF 0x0200 /* LSB First */ 905#define CPHA 0x0400 /* Clock Phase */ 906#define CPOL 0x0800 /* Clock Polarity */ 907#define MSTR 0x1000 /* Master/Slave* */ 908#define WOM 0x2000 /* Write Open Drain Master */ 909#define SPE 0x4000 /* SPI Enable */ 910 911/* SPI_FLG Masks */ 912#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ 913#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ 914#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ 915#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ 916#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ 917#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ 918#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ 919#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ 920#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ 921#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ 922#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ 923#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ 924#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ 925#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ 926 927/* SPI_STAT Masks */ 928#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ 929#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ 930#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ 931#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ 932#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ 933#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ 934#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ 935 936 937/* **************** GENERAL PURPOSE TIMER MASKS **********************/ 938/* TIMER_ENABLE Masks */ 939#define TIMEN0 0x0001 /* Enable Timer 0 */ 940#define TIMEN1 0x0002 /* Enable Timer 1 */ 941#define TIMEN2 0x0004 /* Enable Timer 2 */ 942#define TIMEN3 0x0008 /* Enable Timer 3 */ 943#define TIMEN4 0x0010 /* Enable Timer 4 */ 944#define TIMEN5 0x0020 /* Enable Timer 5 */ 945#define TIMEN6 0x0040 /* Enable Timer 6 */ 946#define TIMEN7 0x0080 /* Enable Timer 7 */ 947 948/* TIMER_DISABLE Masks */ 949#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ 950#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ 951#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ 952#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ 953#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ 954#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ 955#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ 956#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ 957 958/* TIMER_STATUS Masks */ 959#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ 960#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ 961#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ 962#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ 963#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ 964#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ 965#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ 966#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ 967#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ 968#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ 969#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ 970#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ 971#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ 972#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ 973#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ 974#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ 975#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ 976#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ 977#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ 978#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ 979#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ 980#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ 981#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ 982#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ 983 984/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ 985#define TOVL_ERR0 TOVF_ERR0 986#define TOVL_ERR1 TOVF_ERR1 987#define TOVL_ERR2 TOVF_ERR2 988#define TOVL_ERR3 TOVF_ERR3 989#define TOVL_ERR4 TOVF_ERR4 990#define TOVL_ERR5 TOVF_ERR5 991#define TOVL_ERR6 TOVF_ERR6 992#define TOVL_ERR7 TOVF_ERR7 993 994/* TIMERx_CONFIG Masks */ 995#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ 996#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ 997#define EXT_CLK 0x0003 /* External Clock Mode */ 998#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ 999#define PERIOD_CNT 0x0008 /* Period Count */ 1000#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ 1001#define TIN_SEL 0x0020 /* Timer Input Select */ 1002#define OUT_DIS 0x0040 /* Output Pad Disable */ 1003#define CLK_SEL 0x0080 /* Timer Clock Select */ 1004#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ 1005#define EMU_RUN 0x0200 /* Emulation Behavior Select */ 1006#define ERR_TYP 0xC000 /* Error Type */ 1007 1008 1009/* ****************** GPIO PORTS F, G, H MASKS ***********************/ 1010/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ 1011/* Port F Masks */ 1012#define PF0 0x0001 1013#define PF1 0x0002 1014#define PF2 0x0004 1015#define PF3 0x0008 1016#define PF4 0x0010 1017#define PF5 0x0020 1018#define PF6 0x0040 1019#define PF7 0x0080 1020#define PF8 0x0100 1021#define PF9 0x0200 1022#define PF10 0x0400 1023#define PF11 0x0800 1024#define PF12 0x1000 1025#define PF13 0x2000 1026#define PF14 0x4000 1027#define PF15 0x8000 1028 1029/* Port G Masks */ 1030#define PG0 0x0001 1031#define PG1 0x0002 1032#define PG2 0x0004 1033#define PG3 0x0008 1034#define PG4 0x0010 1035#define PG5 0x0020 1036#define PG6 0x0040 1037#define PG7 0x0080 1038#define PG8 0x0100 1039#define PG9 0x0200 1040#define PG10 0x0400 1041#define PG11 0x0800 1042#define PG12 0x1000 1043#define PG13 0x2000 1044#define PG14 0x4000 1045#define PG15 0x8000 1046 1047/* Port H Masks */ 1048#define PH0 0x0001 1049#define PH1 0x0002 1050#define PH2 0x0004 1051#define PH3 0x0008 1052#define PH4 0x0010 1053#define PH5 0x0020 1054#define PH6 0x0040 1055#define PH7 0x0080 1056#define PH8 0x0100 1057#define PH9 0x0200 1058#define PH10 0x0400 1059#define PH11 0x0800 1060#define PH12 0x1000 1061#define PH13 0x2000 1062#define PH14 0x4000 1063#define PH15 0x8000 1064 1065 1066/* ******************* SERIAL PORT MASKS **************************************/ 1067/* SPORTx_TCR1 Masks */ 1068#define TSPEN 0x0001 /* Transmit Enable */ 1069#define ITCLK 0x0002 /* Internal Transmit Clock Select */ 1070#define DTYPE_NORM 0x0004 /* Data Format Normal */ 1071#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ 1072#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ 1073#define TLSBIT 0x0010 /* Transmit Bit Order */ 1074#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ 1075#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ 1076#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ 1077#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ 1078#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ 1079#define TCKFE 0x4000 /* Clock Falling Edge Select */ 1080 1081/* SPORTx_TCR2 Masks and Macro */ 1082#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ 1083#define TXSE 0x0100 /* TX Secondary Enable */ 1084#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ 1085#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ 1086 1087/* SPORTx_RCR1 Masks */ 1088#define RSPEN 0x0001 /* Receive Enable */ 1089#define IRCLK 0x0002 /* Internal Receive Clock Select */ 1090#define DTYPE_NORM 0x0004 /* Data Format Normal */ 1091#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ 1092#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ 1093#define RLSBIT 0x0010 /* Receive Bit Order */ 1094#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ 1095#define RFSR 0x0400 /* Receive Frame Sync Required Select */ 1096#define LRFS 0x1000 /* Low Receive Frame Sync Select */ 1097#define LARFS 0x2000 /* Late Receive Frame Sync Select */ 1098#define RCKFE 0x4000 /* Clock Falling Edge Select */ 1099 1100/* SPORTx_RCR2 Masks */ 1101#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ 1102#define RXSE 0x0100 /* RX Secondary Enable */ 1103#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ 1104#define RRFST 0x0400 /* Right-First Data Order */ 1105 1106/* SPORTx_STAT Masks */ 1107#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ 1108#define RUVF 0x0002 /* Sticky Receive Underflow Status */ 1109#define ROVF 0x0004 /* Sticky Receive Overflow Status */ 1110#define TXF 0x0008 /* Transmit FIFO Full Status */ 1111#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ 1112#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ 1113#define TXHRE 0x0040 /* Transmit Hold Register Empty */ 1114 1115/* SPORTx_MCMC1 Macros */ 1116#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ 1117 1118/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ 1119#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ 1120 1121/* SPORTx_MCMC2 Masks */ 1122#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ 1123#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ 1124#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ 1125#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ 1126#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ 1127#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ 1128#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ 1129#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ 1130#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ 1131#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ 1132#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ 1133#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ 1134#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ 1135#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ 1136#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ 1137#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ 1138#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ 1139#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ 1140#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ 1141#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ 1142#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ 1143#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ 1144#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ 1145 1146 1147/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ 1148/* EBIU_AMGCTL Masks */ 1149#define AMCKEN 0x0001 /* Enable CLKOUT */ 1150#define AMBEN_NONE 0x0000 /* All Banks Disabled */ 1151#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ 1152#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ 1153#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ 1154#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ 1155 1156/* EBIU_AMBCTL0 Masks */ 1157#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ 1158#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ 1159#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ 1160#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ 1161#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ 1162#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ 1163#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ 1164#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ 1165#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ 1166#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ 1167#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ 1168#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ 1169#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ 1170#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ 1171#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ 1172#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ 1173#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ 1174#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ 1175#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ 1176#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ 1177#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ 1178#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ 1179#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ 1180#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ 1181#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ 1182#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ 1183#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ 1184#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ 1185#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ 1186#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ 1187#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ 1188#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ 1189#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ 1190#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ 1191#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ 1192#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ 1193#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ 1194#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ 1195#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ 1196#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ 1197#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ 1198#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ 1199#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ 1200#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ 1201 1202#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ 1203#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ 1204#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ 1205#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ 1206#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ 1207#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ 1208#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ 1209#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ 1210#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ 1211#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ 1212#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ 1213#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ 1214#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ 1215#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ 1216#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ 1217#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ 1218#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ 1219#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ 1220#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ 1221#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ 1222#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ 1223#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ 1224#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ 1225#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ 1226#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ 1227#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ 1228#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ 1229#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ 1230#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ 1231#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ 1232#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ 1233#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ 1234#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ 1235#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ 1236#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ 1237#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ 1238#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ 1239#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ 1240#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ 1241#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ 1242#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ 1243#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ 1244#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ 1245#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ 1246 1247/* EBIU_AMBCTL1 Masks */ 1248#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ 1249#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ 1250#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ 1251#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ 1252#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ 1253#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ 1254#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ 1255#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ 1256#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ 1257#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ 1258#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ 1259#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ 1260#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ 1261#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ 1262#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ 1263#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ 1264#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ 1265#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ 1266#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ 1267#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ 1268#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ 1269#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ 1270#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ 1271#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ 1272#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ 1273#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ 1274#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ 1275#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ 1276#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ 1277#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ 1278#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ 1279#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ 1280#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ 1281#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ 1282#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ 1283#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ 1284#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ 1285#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ 1286#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ 1287#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ 1288#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ 1289#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ 1290#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ 1291#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ 1292 1293#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ 1294#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ 1295#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ 1296#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ 1297#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ 1298#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ 1299#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ 1300#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ 1301#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ 1302#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ 1303#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ 1304#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ 1305#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ 1306#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ 1307#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ 1308#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ 1309#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ 1310#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ 1311#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ 1312#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ 1313#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ 1314#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ 1315#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ 1316#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ 1317#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ 1318#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ 1319#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ 1320#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ 1321#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ 1322#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ 1323#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ 1324#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ 1325#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ 1326#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ 1327#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ 1328#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ 1329#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ 1330#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ 1331#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ 1332#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ 1333#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ 1334#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ 1335#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ 1336#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ 1337 1338 1339/* ********************** SDRAM CONTROLLER MASKS **********************************************/ 1340/* EBIU_SDGCTL Masks */ 1341#define SCTLE 0x00000001 /* Enable SDRAM Signals */ 1342#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ 1343#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ 1344#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ 1345#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ 1346#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ 1347#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ 1348#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ 1349#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ 1350#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ 1351#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ 1352#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ 1353#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ 1354#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ 1355#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ 1356#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ 1357#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ 1358#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ 1359#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ 1360#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ 1361#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ 1362#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ 1363#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ 1364#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ 1365#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ 1366#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ 1367#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ 1368#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ 1369#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ 1370#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ 1371#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ 1372#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ 1373#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ 1374#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ 1375#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ 1376#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ 1377#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ 1378#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ 1379#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ 1380#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ 1381#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ 1382#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ 1383#define EBUFE 0x02000000 /* Enable External Buffering Timing */ 1384#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ 1385#define EMREN 0x10000000 /* Extended Mode Register Enable */ 1386#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ 1387#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ 1388 1389/* EBIU_SDBCTL Masks */ 1390#define EBE 0x0001 /* Enable SDRAM External Bank */ 1391#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ 1392#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ 1393#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ 1394#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ 1395#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */ 1396#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */ 1397#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ 1398#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ 1399#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ 1400#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ 1401 1402/* EBIU_SDSTAT Masks */ 1403#define SDCI 0x0001 /* SDRAM Controller Idle */ 1404#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ 1405#define SDPUA 0x0004 /* SDRAM Power-Up Active */ 1406#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ 1407#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ 1408#define BGSTAT 0x0020 /* Bus Grant Status */ 1409 1410 1411/* ************************** DMA CONTROLLER MASKS ********************************/ 1412/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ 1413#define DMAEN 0x0001 /* DMA Channel Enable */ 1414#define WNR 0x0002 /* Channel Direction (W/R*) */ 1415#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ 1416#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ 1417#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ 1418#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ 1419#define RESTART 0x0020 /* DMA Buffer Clear */ 1420#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ 1421#define DI_EN 0x0080 /* Data Interrupt Enable */ 1422#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ 1423#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ 1424#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ 1425#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ 1426#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ 1427#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ 1428#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ 1429#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ 1430#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ 1431#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ 1432#define NDSIZE 0x0900 /* Next Descriptor Size */ 1433#define DMAFLOW 0x7000 /* Flow Control */ 1434#define DMAFLOW_STOP 0x0000 /* Stop Mode */ 1435#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ 1436#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ 1437#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ 1438#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ 1439 1440/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ 1441#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ 1442#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ 1443#define PMAP_PPI 0x0000 /* PPI Port DMA */ 1444#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ 1445#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ 1446#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ 1447#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ 1448#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ 1449#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ 1450#define PMAP_SPI 0x7000 /* SPI Port DMA */ 1451#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ 1452#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ 1453#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ 1454#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ 1455 1456/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ 1457#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ 1458#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ 1459#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ 1460#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ 1461 1462 1463/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ 1464/* PPI_CONTROL Masks */ 1465#define PORT_EN 0x0001 /* PPI Port Enable */ 1466#define PORT_DIR 0x0002 /* PPI Port Direction */ 1467#define XFR_TYPE 0x000C /* PPI Transfer Type */ 1468#define PORT_CFG 0x0030 /* PPI Port Configuration */ 1469#define FLD_SEL 0x0040 /* PPI Active Field Select */ 1470#define PACK_EN 0x0080 /* PPI Packing Mode */ 1471#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ 1472#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ 1473#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ 1474#define DLEN_8 0x0000 /* Data Length = 8 Bits */ 1475#define DLEN_10 0x0800 /* Data Length = 10 Bits */ 1476#define DLEN_11 0x1000 /* Data Length = 11 Bits */ 1477#define DLEN_12 0x1800 /* Data Length = 12 Bits */ 1478#define DLEN_13 0x2000 /* Data Length = 13 Bits */ 1479#define DLEN_14 0x2800 /* Data Length = 14 Bits */ 1480#define DLEN_15 0x3000 /* Data Length = 15 Bits */ 1481#define DLEN_16 0x3800 /* Data Length = 16 Bits */ 1482#define DLENGTH 0x3800 /* PPI Data Length */ 1483#define POLC 0x4000 /* PPI Clock Polarity */ 1484#define POLS 0x8000 /* PPI Frame Sync Polarity */ 1485 1486/* PPI_STATUS Masks */ 1487#define FLD 0x0400 /* Field Indicator */ 1488#define FT_ERR 0x0800 /* Frame Track Error */ 1489#define OVR 0x1000 /* FIFO Overflow Error */ 1490#define UNDR 0x2000 /* FIFO Underrun Error */ 1491#define ERR_DET 0x4000 /* Error Detected Indicator */ 1492#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ 1493 1494 1495/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ 1496/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ 1497#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ 1498#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ 1499 1500/* TWI_PRESCALE Masks */ 1501#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ 1502#define TWI_ENA 0x0080 /* TWI Enable */ 1503#define SCCB 0x0200 /* SCCB Compatibility Enable */ 1504 1505/* TWI_SLAVE_CTRL Masks */ 1506#define SEN 0x0001 /* Slave Enable */ 1507#define SADD_LEN 0x0002 /* Slave Address Length */ 1508#define STDVAL 0x0004 /* Slave Transmit Data Valid */ 1509#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ 1510#define GEN 0x0010 /* General Call Adrress Matching Enabled */ 1511 1512/* TWI_SLAVE_STAT Masks */ 1513#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ 1514#define GCALL 0x0002 /* General Call Indicator */ 1515 1516/* TWI_MASTER_CTRL Masks */ 1517#define MEN 0x0001 /* Master Mode Enable */ 1518#define MADD_LEN 0x0002 /* Master Address Length */ 1519#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ 1520#define FAST 0x0008 /* Use Fast Mode Timing Specs */ 1521#define STOP 0x0010 /* Issue Stop Condition */ 1522#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ 1523#define DCNT 0x3FC0 /* Data Bytes To Transfer */ 1524#define SDAOVR 0x4000 /* Serial Data Override */ 1525#define SCLOVR 0x8000 /* Serial Clock Override */ 1526 1527/* TWI_MASTER_STAT Masks */ 1528#define MPROG 0x0001 /* Master Transfer In Progress */ 1529#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ 1530#define ANAK 0x0004 /* Address Not Acknowledged */ 1531#define DNAK 0x0008 /* Data Not Acknowledged */ 1532#define BUFRDERR 0x0010 /* Buffer Read Error */ 1533#define BUFWRERR 0x0020 /* Buffer Write Error */ 1534#define SDASEN 0x0040 /* Serial Data Sense */ 1535#define SCLSEN 0x0080 /* Serial Clock Sense */ 1536#define BUSBUSY 0x0100 /* Bus Busy Indicator */ 1537 1538/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ 1539#define SINIT 0x0001 /* Slave Transfer Initiated */ 1540#define SCOMP 0x0002 /* Slave Transfer Complete */ 1541#define SERR 0x0004 /* Slave Transfer Error */ 1542#define SOVF 0x0008 /* Slave Overflow */ 1543#define MCOMP 0x0010 /* Master Transfer Complete */ 1544#define MERR 0x0020 /* Master Transfer Error */ 1545#define XMTSERV 0x0040 /* Transmit FIFO Service */ 1546#define RCVSERV 0x0080 /* Receive FIFO Service */ 1547 1548/* TWI_FIFO_CTRL Masks */ 1549#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ 1550#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ 1551#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ 1552#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ 1553 1554/* TWI_FIFO_STAT Masks */ 1555#define XMTSTAT 0x0003 /* Transmit FIFO Status */ 1556#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ 1557#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ 1558#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ 1559 1560#define RCVSTAT 0x000C /* Receive FIFO Status */ 1561#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ 1562#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ 1563#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ 1564 1565 1566/* Omit CAN masks from defBF534.h */ 1567 1568/* ******************* PIN CONTROL REGISTER MASKS ************************/ 1569/* PORT_MUX Masks */ 1570#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ 1571#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ 1572#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ 1573 1574#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ 1575#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ 1576#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ 1577#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ 1578 1579#define PFDE 0x0008 /* Port F DMA Request Enable */ 1580#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ 1581#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ 1582 1583#define PFTE 0x0010 /* Port F Timer Enable */ 1584#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ 1585#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ 1586 1587#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ 1588#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ 1589#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ 1590 1591#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ 1592#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ 1593#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ 1594 1595#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ 1596#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ 1597#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ 1598 1599#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ 1600#define PFFE_TIMER 0x0000 /* Enable TMR2 */ 1601#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ 1602 1603#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ 1604#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ 1605#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ 1606 1607#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ 1608#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ 1609#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ 1610 1611#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ 1612#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ 1613#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ 1614 1615 1616/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ 1617/* HDMAx_CTL Masks */ 1618#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ 1619#define REP 0x0002 /* HDMA Request Polarity */ 1620#define UTE 0x0004 /* Urgency Threshold Enable */ 1621#define OIE 0x0010 /* Overflow Interrupt Enable */ 1622#define BDIE 0x0020 /* Block Done Interrupt Enable */ 1623#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ 1624#define DRQ 0x0300 /* HDMA Request Type */ 1625#define DRQ_NONE 0x0000 /* No Request */ 1626#define DRQ_SINGLE 0x0100 /* Channels Request Single */ 1627#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ 1628#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ 1629#define RBC 0x1000 /* Reload BCNT With IBCNT */ 1630#define PS 0x2000 /* HDMA Pin Status */ 1631#define OI 0x4000 /* Overflow Interrupt Generated */ 1632#define BDI 0x8000 /* Block Done Interrupt Generated */ 1633 1634/* entry addresses of the user-callable Boot ROM functions */ 1635 1636#define _BOOTROM_RESET 0xEF000000 1637#define _BOOTROM_FINAL_INIT 0xEF000002 1638#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 1639#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 1640#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A 1641#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C 1642#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 1643#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 1644#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 1645 1646/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ 1647#define PGDE_UART PFDE_UART 1648#define PGDE_DMA PFDE_DMA 1649#define CKELOW SCKELOW 1650 1651/* ==== end from defBF534.h ==== */ 1652 1653/* HOST Port Registers */ 1654 1655#define HOST_CONTROL 0xffc03400 /* HOST Control Register */ 1656#define HOST_STATUS 0xffc03404 /* HOST Status Register */ 1657#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */ 1658 1659/* Counter Registers */ 1660 1661#define CNT_CONFIG 0xffc03500 /* Configuration Register */ 1662#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */ 1663#define CNT_STATUS 0xffc03508 /* Status Register */ 1664#define CNT_COMMAND 0xffc0350c /* Command Register */ 1665#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */ 1666#define CNT_COUNTER 0xffc03514 /* Counter Register */ 1667#define CNT_MAX 0xffc03518 /* Maximal Count Register */ 1668#define CNT_MIN 0xffc0351c /* Minimal Count Register */ 1669 1670/* OTP/FUSE Registers */ 1671 1672#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */ 1673#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */ 1674#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */ 1675#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */ 1676 1677/* Security Registers */ 1678 1679#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */ 1680#define SECURE_CONTROL 0xffc03624 /* Secure Control */ 1681#define SECURE_STATUS 0xffc03628 /* Secure Status */ 1682 1683/* OTP Read/Write Data Buffer Registers */ 1684 1685#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ 1686#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ 1687#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ 1688#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ 1689 1690/* NFC Registers */ 1691 1692#define NFC_CTL 0xffc03700 /* NAND Control Register */ 1693#define NFC_STAT 0xffc03704 /* NAND Status Register */ 1694#define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */ 1695#define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */ 1696#define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */ 1697#define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */ 1698#define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */ 1699#define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */ 1700#define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */ 1701#define NFC_RST 0xffc03724 /* NAND ECC Reset Register */ 1702#define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */ 1703#define NFC_READ 0xffc0372c /* NAND Read Data Register */ 1704#define NFC_ADDR 0xffc03740 /* NAND Address Register */ 1705#define NFC_CMD 0xffc03744 /* NAND Command Register */ 1706#define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */ 1707#define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */ 1708 1709/* ********************************************************** */ 1710/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ 1711/* and MULTI BIT READ MACROS */ 1712/* ********************************************************** */ 1713 1714/* Bit masks for HOST_CONTROL */ 1715 1716#define HOST_EN 0x1 /* Host Enable */ 1717#define nHOST_EN 0x0 1718#define HOST_END 0x2 /* Host Endianess */ 1719#define nHOST_END 0x0 1720#define DATA_SIZE 0x4 /* Data Size */ 1721#define nDATA_SIZE 0x0 1722#define HOST_RST 0x8 /* Host Reset */ 1723#define nHOST_RST 0x0 1724#define HRDY_OVR 0x20 /* Host Ready Override */ 1725#define nHRDY_OVR 0x0 1726#define INT_MODE 0x40 /* Interrupt Mode */ 1727#define nINT_MODE 0x0 1728#define BT_EN 0x80 /* Bus Timeout Enable */ 1729#define nBT_EN 0x0 1730#define EHW 0x100 /* Enable Host Write */ 1731#define nEHW 0x0 1732#define EHR 0x200 /* Enable Host Read */ 1733#define nEHR 0x0 1734#define BDR 0x400 /* Burst DMA Requests */ 1735#define nBDR 0x0 1736 1737/* Bit masks for HOST_STATUS */ 1738 1739#define READY 0x1 /* DMA Ready */ 1740#define nREADY 0x0 1741#define FIFOFULL 0x2 /* FIFO Full */ 1742#define nFIFOFULL 0x0 1743#define FIFOEMPTY 0x4 /* FIFO Empty */ 1744#define nFIFOEMPTY 0x0 1745#define COMPLETE 0x8 /* DMA Complete */ 1746#define nCOMPLETE 0x0 1747#define HSHK 0x10 /* Host Handshake */ 1748#define nHSHK 0x0 1749#define TIMEOUT 0x20 /* Host Timeout */ 1750#define nTIMEOUT 0x0 1751#define HIRQ 0x40 /* Host Interrupt Request */ 1752#define nHIRQ 0x0 1753#define ALLOW_CNFG 0x80 /* Allow New Configuration */ 1754#define nALLOW_CNFG 0x0 1755#define DMA_DIR 0x100 /* DMA Direction */ 1756#define nDMA_DIR 0x0 1757#define BTE 0x200 /* Bus Timeout Enabled */ 1758#define nBTE 0x0 1759#define HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */ 1760#define nHOSTRD_DONE 0x0 1761 1762/* Bit masks for HOST_TIMEOUT */ 1763 1764#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ 1765 1766/* Bit masks for CNT_CONFIG */ 1767 1768#define CNTE 0x1 /* Counter Enable */ 1769#define nCNTE 0x0 1770#define DEBE 0x2 /* Debounce Enable */ 1771#define nDEBE 0x0 1772#define CDGINV 0x10 /* CDG Pin Polarity Invert */ 1773#define nCDGINV 0x0 1774#define CUDINV 0x20 /* CUD Pin Polarity Invert */ 1775#define nCUDINV 0x0 1776#define CZMINV 0x40 /* CZM Pin Polarity Invert */ 1777#define nCZMINV 0x0 1778#define CNTMODE 0x700 /* Counter Operating Mode */ 1779#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ 1780#define nZMZC 0x0 1781#define BNDMODE 0x3000 /* Boundary register Mode */ 1782#define INPDIS 0x8000 /* CUG and CDG Input Disable */ 1783#define nINPDIS 0x0 1784 1785/* Bit masks for CNT_IMASK */ 1786 1787#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ 1788#define nICIE 0x0 1789#define UCIE 0x2 /* Up count Interrupt Enable */ 1790#define nUCIE 0x0 1791#define DCIE 0x4 /* Down count Interrupt Enable */ 1792#define nDCIE 0x0 1793#define MINCIE 0x8 /* Min Count Interrupt Enable */ 1794#define nMINCIE 0x0 1795#define MAXCIE 0x10 /* Max Count Interrupt Enable */ 1796#define nMAXCIE 0x0 1797#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ 1798#define nCOV31IE 0x0 1799#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ 1800#define nCOV15IE 0x0 1801#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ 1802#define nCZEROIE 0x0 1803#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ 1804#define nCZMIE 0x0 1805#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ 1806#define nCZMEIE 0x0 1807#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ 1808#define nCZMZIE 0x0 1809 1810/* Bit masks for CNT_STATUS */ 1811 1812#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ 1813#define nICII 0x0 1814#define UCII 0x2 /* Up count Interrupt Identifier */ 1815#define nUCII 0x0 1816#define DCII 0x4 /* Down count Interrupt Identifier */ 1817#define nDCII 0x0 1818#define MINCII 0x8 /* Min Count Interrupt Identifier */ 1819#define nMINCII 0x0 1820#define MAXCII 0x10 /* Max Count Interrupt Identifier */ 1821#define nMAXCII 0x0 1822#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ 1823#define nCOV31II 0x0 1824#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ 1825#define nCOV15II 0x0 1826#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ 1827#define nCZEROII 0x0 1828#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ 1829#define nCZMII 0x0 1830#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ 1831#define nCZMEII 0x0 1832#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ 1833#define nCZMZII 0x0 1834 1835/* Bit masks for CNT_COMMAND */ 1836 1837#define W1LCNT 0xf /* Load Counter Register */ 1838#define W1LMIN 0xf0 /* Load Min Register */ 1839#define W1LMAX 0xf00 /* Load Max Register */ 1840#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ 1841#define nW1ZMONCE 0x0 1842 1843/* Bit masks for CNT_DEBOUNCE */ 1844 1845#define DPRESCALE 0xf /* Load Counter Register */ 1846 1847/* Bit masks for OTP_CONTROL */ 1848 1849#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ 1850#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ 1851#define nFIEN 0x0 1852#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ 1853#define nFTESTDEC 0x0 1854#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ 1855#define nFWRTEST 0x0 1856#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ 1857#define nFRDEN 0x0 1858#define FWREN 0x8000 /* OTP/Fuse Write Enable */ 1859#define nFWREN 0x0 1860 1861/* Bit masks for OTP_BEN */ 1862 1863#define FBEN 0xffff /* OTP/Fuse Byte Enable */ 1864 1865/* Bit masks for OTP_STATUS */ 1866 1867#define FCOMP 0x1 /* OTP/Fuse Access Complete */ 1868#define nFCOMP 0x0 1869#define FERROR 0x2 /* OTP/Fuse Access Error */ 1870#define nFERROR 0x0 1871#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ 1872#define nMMRGLOAD 0x0 1873#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ 1874#define nMMRGLOCK 0x0 1875#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ 1876#define nFPGMEN 0x0 1877 1878/* Bit masks for OTP_TIMING */ 1879 1880#define USECDIV 0xff /* Micro Second Divider */ 1881#define READACC 0x7f00 /* Read Access Time */ 1882#define CPUMPRL 0x38000 /* Charge Pump Release Time */ 1883#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ 1884#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ 1885#define PGMTIME 0xff000000 /* Program Time */ 1886 1887/* Bit masks for SECURE_SYSSWT */ 1888 1889#define EMUDABL 0x1 /* Emulation Disable. */ 1890#define nEMUDABL 0x0 1891#define RSTDABL 0x2 /* Reset Disable */ 1892#define nRSTDABL 0x0 1893#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ 1894#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ 1895#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ 1896#define DMA0OVR 0x800 /* DMA0 Memory Access Override */ 1897#define nDMA0OVR 0x0 1898#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ 1899#define nDMA1OVR 0x0 1900#define EMUOVR 0x4000 /* Emulation Override */ 1901#define nEMUOVR 0x0 1902#define OTPSEN 0x8000 /* OTP Secrets Enable. */ 1903#define nOTPSEN 0x0 1904#define L2DABL 0x70000 /* L2 Memory Disable. */ 1905 1906/* Bit masks for SECURE_CONTROL */ 1907 1908#define SECURE0 0x1 /* SECURE 0 */ 1909#define nSECURE0 0x0 1910#define SECURE1 0x2 /* SECURE 1 */ 1911#define nSECURE1 0x0 1912#define SECURE2 0x4 /* SECURE 2 */ 1913#define nSECURE2 0x0 1914#define SECURE3 0x8 /* SECURE 3 */ 1915#define nSECURE3 0x0 1916 1917/* Bit masks for SECURE_STATUS */ 1918 1919#define SECMODE 0x3 /* Secured Mode Control State */ 1920#define NMI 0x4 /* Non Maskable Interrupt */ 1921#define nNMI 0x0 1922#define AFVALID 0x8 /* Authentication Firmware Valid */ 1923#define nAFVALID 0x0 1924#define AFEXIT 0x10 /* Authentication Firmware Exit */ 1925#define nAFEXIT 0x0 1926#define SECSTAT 0xe0 /* Secure Status */ 1927 1928/* Bit masks for NFC_CTL */ 1929 1930#define WR_DLY 0xf /* Write Strobe Delay */ 1931#define RD_DLY 0xf0 /* Read Strobe Delay */ 1932#define NWIDTH 0x100 /* NAND Data Width */ 1933#define nNWIDTH 0x0 1934#define PG_SIZE 0x200 /* Page Size */ 1935#define nPG_SIZE 0x0 1936 1937/* Bit masks for NFC_STAT */ 1938 1939#define NBUSY 0x1 /* Not Busy */ 1940#define nNBUSY 0x0 1941#define WB_FULL 0x2 /* Write Buffer Full */ 1942#define nWB_FULL 0x0 1943#define PG_WR_STAT 0x4 /* Page Write Pending */ 1944#define nPG_WR_STAT 0x0 1945#define PG_RD_STAT 0x8 /* Page Read Pending */ 1946#define nPG_RD_STAT 0x0 1947#define WB_EMPTY 0x10 /* Write Buffer Empty */ 1948#define nWB_EMPTY 0x0 1949 1950/* Bit masks for NFC_IRQSTAT */ 1951 1952#define NBUSYIRQ 0x1 /* Not Busy IRQ */ 1953#define nNBUSYIRQ 0x0 1954#define WB_OVF 0x2 /* Write Buffer Overflow */ 1955#define nWB_OVF 0x0 1956#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ 1957#define nWB_EDGE 0x0 1958#define RD_RDY 0x8 /* Read Data Ready */ 1959#define nRD_RDY 0x0 1960#define WR_DONE 0x10 /* Page Write Done */ 1961#define nWR_DONE 0x0 1962 1963/* Bit masks for NFC_IRQMASK */ 1964 1965#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ 1966#define nMASK_BUSYIRQ 0x0 1967#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ 1968#define nMASK_WBOVF 0x0 1969#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ 1970#define nMASK_WBEMPTY 0x0 1971#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ 1972#define nMASK_RDRDY 0x0 1973#define MASK_WRDONE 0x10 /* Mask Write Done */ 1974#define nMASK_WRDONE 0x0 1975 1976/* Bit masks for NFC_RST */ 1977 1978#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ 1979#define nECC_RST 0x0 1980 1981/* Bit masks for NFC_PGCTL */ 1982 1983#define PG_RD_START 0x1 /* Page Read Start */ 1984#define nPG_RD_START 0x0 1985#define PG_WR_START 0x2 /* Page Write Start */ 1986#define nPG_WR_START 0x0 1987 1988/* Bit masks for NFC_ECC0 */ 1989 1990#define ECC0 0x7ff /* Parity Calculation Result0 */ 1991 1992/* Bit masks for NFC_ECC1 */ 1993 1994#define ECC1 0x7ff /* Parity Calculation Result1 */ 1995 1996/* Bit masks for NFC_ECC2 */ 1997 1998#define ECC2 0x7ff /* Parity Calculation Result2 */ 1999 2000/* Bit masks for NFC_ECC3 */ 2001 2002#define ECC3 0x7ff /* Parity Calculation Result3 */ 2003 2004/* Bit masks for NFC_COUNT */ 2005 2006#define ECCCNT 0x3ff /* Transfer Count */ 2007 2008 2009#endif /* _DEF_BF52X_H */ 2010