1#ifndef _LMC_IOCTL_H_ 2#define _LMC_IOCTL_H_ 3/* $Id: lmc_ioctl.h,v 1.1.1.1 2007/08/03 18:52:49 Exp $ */ 4 5 /* 6 * Copyright (c) 1997-2000 LAN Media Corporation (LMC) 7 * All rights reserved. www.lanmedia.com 8 * 9 * This code is written by: 10 * Andrew Stanley-Jones (asj@cban.com) 11 * Rob Braun (bbraun@vix.com), 12 * Michael Graff (explorer@vix.com) and 13 * Matt Thomas (matt@3am-software.com). 14 * 15 * This software may be used and distributed according to the terms 16 * of the GNU General Public License version 2, incorporated herein by reference. 17 */ 18 19#define LMCIOCGINFO SIOCDEVPRIVATE+3 /* get current state */ 20#define LMCIOCSINFO SIOCDEVPRIVATE+4 /* set state to user values */ 21#define LMCIOCGETLMCSTATS SIOCDEVPRIVATE+5 22#define LMCIOCCLEARLMCSTATS SIOCDEVPRIVATE+6 23#define LMCIOCDUMPEVENTLOG SIOCDEVPRIVATE+7 24#define LMCIOCGETXINFO SIOCDEVPRIVATE+8 25#define LMCIOCSETCIRCUIT SIOCDEVPRIVATE+9 26#define LMCIOCUNUSEDATM SIOCDEVPRIVATE+10 27#define LMCIOCRESET SIOCDEVPRIVATE+11 28#define LMCIOCT1CONTROL SIOCDEVPRIVATE+12 29#define LMCIOCIFTYPE SIOCDEVPRIVATE+13 30#define LMCIOCXILINX SIOCDEVPRIVATE+14 31 32#define LMC_CARDTYPE_UNKNOWN -1 33#define LMC_CARDTYPE_HSSI 1 /* probed card is a HSSI card */ 34#define LMC_CARDTYPE_DS3 2 /* probed card is a DS3 card */ 35#define LMC_CARDTYPE_SSI 3 /* probed card is a SSI card */ 36#define LMC_CARDTYPE_T1 4 /* probed card is a T1 card */ 37 38#define LMC_CTL_CARDTYPE_LMC5200 0 /* HSSI */ 39#define LMC_CTL_CARDTYPE_LMC5245 1 /* DS3 */ 40#define LMC_CTL_CARDTYPE_LMC1000 2 /* SSI, V.35 */ 41#define LMC_CTL_CARDTYPE_LMC1200 3 /* DS1 */ 42 43#define LMC_CTL_OFF 0 /* generic OFF value */ 44#define LMC_CTL_ON 1 /* generic ON value */ 45 46#define LMC_CTL_CLOCK_SOURCE_EXT 0 /* clock off line */ 47#define LMC_CTL_CLOCK_SOURCE_INT 1 /* internal clock */ 48 49#define LMC_CTL_CRC_LENGTH_16 16 50#define LMC_CTL_CRC_LENGTH_32 32 51#define LMC_CTL_CRC_BYTESIZE_2 2 52#define LMC_CTL_CRC_BYTESIZE_4 4 53 54 55#define LMC_CTL_CABLE_LENGTH_LT_100FT 0 /* DS3 cable < 100 feet */ 56#define LMC_CTL_CABLE_LENGTH_GT_100FT 1 /* DS3 cable >= 100 feet */ 57 58#define LMC_CTL_CIRCUIT_TYPE_E1 0 59#define LMC_CTL_CIRCUIT_TYPE_T1 1 60 61/* 62 * IFTYPE defines 63 */ 64#define LMC_PPP 1 /* use sppp interface */ 65#define LMC_NET 2 /* use direct net interface */ 66#define LMC_RAW 3 /* use direct net interface */ 67 68/* 69 * These are not in the least IOCTL related, but I want them common. 70 */ 71/* 72 * assignments for the GPIO register on the DEC chip (common) 73 */ 74#define LMC_GEP_INIT 0x01 /* 0: */ 75#define LMC_GEP_RESET 0x02 /* 1: */ 76#define LMC_GEP_MODE 0x10 /* 4: */ 77#define LMC_GEP_DP 0x20 /* 5: */ 78#define LMC_GEP_DATA 0x40 /* 6: serial out */ 79#define LMC_GEP_CLK 0x80 /* 7: serial clock */ 80 81/* 82 * HSSI GPIO assignments 83 */ 84#define LMC_GEP_HSSI_ST 0x04 /* 2: receive timing sense (deprecated) */ 85#define LMC_GEP_HSSI_CLOCK 0x08 /* 3: clock source */ 86 87/* 88 * T1 GPIO assignments 89 */ 90#define LMC_GEP_SSI_GENERATOR 0x04 /* 2: enable prog freq gen serial i/f */ 91#define LMC_GEP_SSI_TXCLOCK 0x08 /* 3: provide clock on TXCLOCK output */ 92 93/* 94 * Common MII16 bits 95 */ 96#define LMC_MII16_LED0 0x0080 97#define LMC_MII16_LED1 0x0100 98#define LMC_MII16_LED2 0x0200 99#define LMC_MII16_LED3 0x0400 /* Error, and the red one */ 100#define LMC_MII16_LED_ALL 0x0780 /* LED bit mask */ 101#define LMC_MII16_FIFO_RESET 0x0800 102 103/* 104 * definitions for HSSI 105 */ 106#define LMC_MII16_HSSI_TA 0x0001 107#define LMC_MII16_HSSI_CA 0x0002 108#define LMC_MII16_HSSI_LA 0x0004 109#define LMC_MII16_HSSI_LB 0x0008 110#define LMC_MII16_HSSI_LC 0x0010 111#define LMC_MII16_HSSI_TM 0x0020 112#define LMC_MII16_HSSI_CRC 0x0040 113 114/* 115 * assignments for the MII register 16 (DS3) 116 */ 117#define LMC_MII16_DS3_ZERO 0x0001 118#define LMC_MII16_DS3_TRLBK 0x0002 119#define LMC_MII16_DS3_LNLBK 0x0004 120#define LMC_MII16_DS3_RAIS 0x0008 121#define LMC_MII16_DS3_TAIS 0x0010 122#define LMC_MII16_DS3_BIST 0x0020 123#define LMC_MII16_DS3_DLOS 0x0040 124#define LMC_MII16_DS3_CRC 0x1000 125#define LMC_MII16_DS3_SCRAM 0x2000 126#define LMC_MII16_DS3_SCRAM_LARS 0x4000 127 128/* Note: 2 pairs of LEDs where swapped by mistake 129 * in Xilinx code for DS3 & DS1 adapters */ 130#define LMC_DS3_LED0 0x0100 /* bit 08 yellow */ 131#define LMC_DS3_LED1 0x0080 /* bit 07 blue */ 132#define LMC_DS3_LED2 0x0400 /* bit 10 green */ 133#define LMC_DS3_LED3 0x0200 /* bit 09 red */ 134 135/* 136 * framer register 0 and 7 (7 is latched and reset on read) 137 */ 138#define LMC_FRAMER_REG0_DLOS 0x80 /* digital loss of service */ 139#define LMC_FRAMER_REG0_OOFS 0x40 /* out of frame sync */ 140#define LMC_FRAMER_REG0_AIS 0x20 /* alarm indication signal */ 141#define LMC_FRAMER_REG0_CIS 0x10 /* channel idle */ 142#define LMC_FRAMER_REG0_LOC 0x08 /* loss of clock */ 143 144/* 145 * Framer register 9 contains the blue alarm signal 146 */ 147#define LMC_FRAMER_REG9_RBLUE 0x02 /* Blue alarm failure */ 148 149/* 150 * Framer register 0x10 contains xbit error 151 */ 152#define LMC_FRAMER_REG10_XBIT 0x01 /* X bit error alarm failure */ 153 154/* 155 * And SSI, LMC1000 156 */ 157#define LMC_MII16_SSI_DTR 0x0001 /* DTR output RW */ 158#define LMC_MII16_SSI_DSR 0x0002 /* DSR input RO */ 159#define LMC_MII16_SSI_RTS 0x0004 /* RTS output RW */ 160#define LMC_MII16_SSI_CTS 0x0008 /* CTS input RO */ 161#define LMC_MII16_SSI_DCD 0x0010 /* DCD input RO */ 162#define LMC_MII16_SSI_RI 0x0020 /* RI input RO */ 163#define LMC_MII16_SSI_CRC 0x1000 /* CRC select - RW */ 164 165/* 166 * bits 0x0080 through 0x0800 are generic, and described 167 * above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET 168 */ 169#define LMC_MII16_SSI_LL 0x1000 /* LL output RW */ 170#define LMC_MII16_SSI_RL 0x2000 /* RL output RW */ 171#define LMC_MII16_SSI_TM 0x4000 /* TM input RO */ 172#define LMC_MII16_SSI_LOOP 0x8000 /* loopback enable RW */ 173 174/* 175 * Some of the MII16 bits are mirrored in the MII17 register as well, 176 * but let's keep thing separate for now, and get only the cable from 177 * the MII17. 178 */ 179#define LMC_MII17_SSI_CABLE_MASK 0x0038 /* mask to extract the cable type */ 180#define LMC_MII17_SSI_CABLE_SHIFT 3 /* shift to extract the cable type */ 181 182/* 183 * And T1, LMC1200 184 */ 185#define LMC_MII16_T1_UNUSED1 0x0003 186#define LMC_MII16_T1_XOE 0x0004 187#define LMC_MII16_T1_RST 0x0008 /* T1 chip reset - RW */ 188#define LMC_MII16_T1_Z 0x0010 /* output impedance T1=1, E1=0 output - RW */ 189#define LMC_MII16_T1_INTR 0x0020 /* interrupt from 8370 - RO */ 190#define LMC_MII16_T1_ONESEC 0x0040 /* one second square wave - ro */ 191 192#define LMC_MII16_T1_LED0 0x0100 193#define LMC_MII16_T1_LED1 0x0080 194#define LMC_MII16_T1_LED2 0x0400 195#define LMC_MII16_T1_LED3 0x0200 196#define LMC_MII16_T1_FIFO_RESET 0x0800 197 198#define LMC_MII16_T1_CRC 0x1000 /* CRC select - RW */ 199#define LMC_MII16_T1_UNUSED2 0xe000 200 201 202/* 8370 framer registers */ 203 204#define T1FRAMER_ALARM1_STATUS 0x47 205#define T1FRAMER_ALARM2_STATUS 0x48 206#define T1FRAMER_FERR_LSB 0x50 207#define T1FRAMER_FERR_MSB 0x51 /* framing bit error counter */ 208#define T1FRAMER_LCV_LSB 0x54 209#define T1FRAMER_LCV_MSB 0x55 /* line code violation counter */ 210#define T1FRAMER_AERR 0x5A 211 212/* mask for the above AERR register */ 213#define T1FRAMER_LOF_MASK (0x0f0) /* receive loss of frame */ 214#define T1FRAMER_COFA_MASK (0x0c0) /* change of frame alignment */ 215#define T1FRAMER_SEF_MASK (0x03) /* severely errored frame */ 216 217/* 8370 framer register ALM1 (0x47) values 218 * used to determine link status 219 */ 220 221#define T1F_SIGFRZ 0x01 /* signaling freeze */ 222#define T1F_RLOF 0x02 /* receive loss of frame alignment */ 223#define T1F_RLOS 0x04 /* receive loss of signal */ 224#define T1F_RALOS 0x08 /* receive analog loss of signal or RCKI loss of clock */ 225#define T1F_RAIS 0x10 /* receive alarm indication signal */ 226#define T1F_UNUSED 0x20 227#define T1F_RYEL 0x40 /* receive yellow alarm */ 228#define T1F_RMYEL 0x80 /* receive multiframe yellow alarm */ 229 230#define LMC_T1F_WRITE 0 231#define LMC_T1F_READ 1 232 233typedef struct lmc_st1f_control { 234 int command; 235 int address; 236 int value; 237 char __user *data; 238} lmc_t1f_control; 239 240enum lmc_xilinx_c { 241 lmc_xilinx_reset = 1, 242 lmc_xilinx_load_prom = 2, 243 lmc_xilinx_load = 3 244}; 245 246struct lmc_xilinx_control { 247 enum lmc_xilinx_c command; 248 int len; 249 char __user *data; 250}; 251 252/* ------------------ end T1 defs ------------------- */ 253 254#define LMC_MII_LedMask 0x0780 255#define LMC_MII_LedBitPos 7 256 257#endif 258