1/* myri_sbus.h: Defines for MyriCOM MyriNET SBUS card driver. 2 * 3 * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) 4 */ 5 6#ifndef _MYRI_SBUS_H 7#define _MYRI_SBUS_H 8 9/* LANAI Registers */ 10#define LANAI_IPF0 0x00UL /* Context zero state registers.*/ 11#define LANAI_CUR0 0x04UL 12#define LANAI_PREV0 0x08UL 13#define LANAI_DATA0 0x0cUL 14#define LANAI_DPF0 0x10UL 15#define LANAI_IPF1 0x14UL /* Context one state registers. */ 16#define LANAI_CUR1 0x18UL 17#define LANAI_PREV1 0x1cUL 18#define LANAI_DATA1 0x20UL 19#define LANAI_DPF1 0x24UL 20#define LANAI_ISTAT 0x28UL /* Interrupt status. */ 21#define LANAI_EIMASK 0x2cUL /* External IRQ mask. */ 22#define LANAI_ITIMER 0x30UL /* IRQ timer. */ 23#define LANAI_RTC 0x34UL /* Real Time Clock */ 24#define LANAI_CSUM 0x38UL /* Checksum. */ 25#define LANAI_DMAXADDR 0x3cUL /* SBUS DMA external address. */ 26#define LANAI_DMALADDR 0x40UL /* SBUS DMA local address. */ 27#define LANAI_DMACTR 0x44UL /* SBUS DMA counter. */ 28#define LANAI_RXDMAPTR 0x48UL /* Receive DMA pointer. */ 29#define LANAI_RXDMALIM 0x4cUL /* Receive DMA limit. */ 30#define LANAI_TXDMAPTR 0x50UL /* Transmit DMA pointer. */ 31#define LANAI_TXDMALIM 0x54UL /* Transmit DMA limit. */ 32#define LANAI_TXDMALIMT 0x58UL /* Transmit DMA limit w/tail. */ 33 /* 0x5cUL, reserved */ 34#define LANAI_RBYTE 0x60UL /* Receive byte. */ 35 /* 0x64-->0x6c, reserved */ 36#define LANAI_RHALF 0x70UL /* Receive half-word. */ 37 /* 0x72UL, reserved */ 38#define LANAI_RWORD 0x74UL /* Receive word. */ 39#define LANAI_SALIGN 0x78UL /* Send align. */ 40#define LANAI_SBYTE 0x7cUL /* SingleSend send-byte. */ 41#define LANAI_SHALF 0x80UL /* SingleSend send-halfword. */ 42#define LANAI_SWORD 0x84UL /* SingleSend send-word. */ 43#define LANAI_SSENDT 0x88UL /* SingleSend special. */ 44#define LANAI_DMADIR 0x8cUL /* DMA direction. */ 45#define LANAI_DMASTAT 0x90UL /* DMA status. */ 46#define LANAI_TIMEO 0x94UL /* Timeout register. */ 47#define LANAI_MYRINET 0x98UL 48#define LANAI_HWDEBUG 0x9cUL /* Hardware debugging reg. */ 49#define LANAI_LEDS 0xa0UL /* LED control. */ 50#define LANAI_VERS 0xa4UL /* Version register. */ 51#define LANAI_LINKON 0xa8UL /* Link activation reg. */ 52 /* 0xac-->0x104, reserved */ 53#define LANAI_CVAL 0x108UL /* Clock value register. */ 54#define LANAI_REG_SIZE 0x10cUL 55 56/* Interrupt status bits. */ 57#define ISTAT_DEBUG 0x80000000 58#define ISTAT_HOST 0x40000000 59#define ISTAT_LAN7 0x00800000 60#define ISTAT_LAN6 0x00400000 61#define ISTAT_LAN5 0x00200000 62#define ISTAT_LAN4 0x00100000 63#define ISTAT_LAN3 0x00080000 64#define ISTAT_LAN2 0x00040000 65#define ISTAT_LAN1 0x00020000 66#define ISTAT_LAN0 0x00010000 67#define ISTAT_WRDY 0x00008000 68#define ISTAT_HRDY 0x00004000 69#define ISTAT_SRDY 0x00002000 70#define ISTAT_LINK 0x00001000 71#define ISTAT_FRES 0x00000800 72#define ISTAT_NRES 0x00000800 73#define ISTAT_WAKE 0x00000400 74#define ISTAT_OB2 0x00000200 75#define ISTAT_OB1 0x00000100 76#define ISTAT_TAIL 0x00000080 77#define ISTAT_WDOG 0x00000040 78#define ISTAT_TIME 0x00000020 79#define ISTAT_DMA 0x00000010 80#define ISTAT_SEND 0x00000008 81#define ISTAT_BUF 0x00000004 82#define ISTAT_RECV 0x00000002 83#define ISTAT_BRDY 0x00000001 84 85/* MYRI Registers */ 86#define MYRI_RESETOFF 0x00UL 87#define MYRI_RESETON 0x04UL 88#define MYRI_IRQOFF 0x08UL 89#define MYRI_IRQON 0x0cUL 90#define MYRI_WAKEUPOFF 0x10UL 91#define MYRI_WAKEUPON 0x14UL 92#define MYRI_IRQREAD 0x18UL 93 /* 0x1c-->0x3ffc, reserved */ 94#define MYRI_LOCALMEM 0x4000UL 95#define MYRI_REG_SIZE 0x25000UL 96 97/* Shared memory interrupt mask. */ 98#define SHMEM_IMASK_RX 0x00000002 99#define SHMEM_IMASK_TX 0x00000001 100 101/* Just to make things readable. */ 102#define KERNEL_CHANNEL 0 103 104/* The size of this must be >= 129 bytes. */ 105struct myri_eeprom { 106 unsigned int cval; 107 unsigned short cpuvers; 108 unsigned char id[6]; 109 unsigned int ramsz; 110 unsigned char fvers[32]; 111 unsigned char mvers[16]; 112 unsigned short dlval; 113 unsigned short brd_type; 114 unsigned short bus_type; 115 unsigned short prod_code; 116 unsigned int serial_num; 117 unsigned short _reserved[24]; 118 unsigned int _unused[2]; 119}; 120 121/* EEPROM bus types, only SBUS is valid in this driver. */ 122#define BUS_TYPE_SBUS 1 123 124/* EEPROM CPU revisions. */ 125#define CPUVERS_2_3 0x0203 126#define CPUVERS_3_0 0x0300 127#define CPUVERS_3_1 0x0301 128#define CPUVERS_3_2 0x0302 129#define CPUVERS_4_0 0x0400 130#define CPUVERS_4_1 0x0401 131#define CPUVERS_4_2 0x0402 132#define CPUVERS_5_0 0x0500 133 134/* MYRI Control Registers */ 135#define MYRICTRL_CTRL 0x00UL 136#define MYRICTRL_IRQLVL 0x02UL 137#define MYRICTRL_REG_SIZE 0x04UL 138 139/* Global control register defines. */ 140#define CONTROL_ROFF 0x8000 /* Reset OFF. */ 141#define CONTROL_RON 0x4000 /* Reset ON. */ 142#define CONTROL_EIRQ 0x2000 /* Enable IRQ's. */ 143#define CONTROL_DIRQ 0x1000 /* Disable IRQ's. */ 144#define CONTROL_WON 0x0800 /* Wake-up ON. */ 145 146#define MYRI_SCATTER_ENTRIES 8 147#define MYRI_GATHER_ENTRIES 16 148 149struct myri_sglist { 150 u32 addr; 151 u32 len; 152}; 153 154struct myri_rxd { 155 struct myri_sglist myri_scatters[MYRI_SCATTER_ENTRIES]; /* DMA scatter list.*/ 156 u32 csum; /* HW computed checksum. */ 157 u32 ctx; 158 u32 num_sg; /* Total scatter entries. */ 159}; 160 161struct myri_txd { 162 struct myri_sglist myri_gathers[MYRI_GATHER_ENTRIES]; /* DMA scatter list. */ 163 u32 num_sg; /* Total scatter entries. */ 164 u16 addr[4]; 165 u32 chan; 166 u32 len; /* Total length of packet. */ 167 u32 csum_off; /* Where data to csum is. */ 168 u32 csum_field; /* Where csum goes in pkt. */ 169}; 170 171#define MYRINET_MTU 8432 172#define RX_ALLOC_SIZE 8448 173#define MYRI_PAD_LEN 2 174#define RX_COPY_THRESHOLD 256 175 176/* These numbers are cast in stone, new firmware is needed if 177 * you want to change them. 178 */ 179#define TX_RING_MAXSIZE 16 180#define RX_RING_MAXSIZE 16 181 182#define TX_RING_SIZE 16 183#define RX_RING_SIZE 16 184 185/* GRRR... */ 186static __inline__ int NEXT_RX(int num) 187{ 188 if(++num > RX_RING_SIZE) 189 num = 0; 190 return num; 191} 192 193static __inline__ int PREV_RX(int num) 194{ 195 if(--num < 0) 196 num = RX_RING_SIZE; 197 return num; 198} 199 200#define NEXT_TX(num) (((num) + 1) & (TX_RING_SIZE - 1)) 201#define PREV_TX(num) (((num) - 1) & (TX_RING_SIZE - 1)) 202 203#define TX_BUFFS_AVAIL(head, tail) \ 204 ((head) <= (tail) ? \ 205 (head) + (TX_RING_SIZE - 1) - (tail) : \ 206 (head) - (tail) - 1) 207 208struct sendq { 209 u32 tail; 210 u32 head; 211 u32 hdebug; 212 u32 mdebug; 213 struct myri_txd myri_txd[TX_RING_MAXSIZE]; 214}; 215 216struct recvq { 217 u32 head; 218 u32 tail; 219 u32 hdebug; 220 u32 mdebug; 221 struct myri_rxd myri_rxd[RX_RING_MAXSIZE + 1]; 222}; 223 224#define MYRI_MLIST_SIZE 8 225 226struct mclist { 227 u32 maxlen; 228 u32 len; 229 u32 cache; 230 struct pair { 231 u8 addr[8]; 232 u32 val; 233 } mc_pairs[MYRI_MLIST_SIZE]; 234 u8 bcast_addr[8]; 235}; 236 237struct myri_channel { 238 u32 state; /* State of the channel. */ 239 u32 busy; /* Channel is busy. */ 240 struct sendq sendq; /* Device tx queue. */ 241 struct recvq recvq; /* Device rx queue. */ 242 struct recvq recvqa; /* Device rx queue acked. */ 243 u32 rbytes; /* Receive bytes. */ 244 u32 sbytes; /* Send bytes. */ 245 u32 rmsgs; /* Receive messages. */ 246 u32 smsgs; /* Send messages. */ 247 struct mclist mclist; /* Device multicast list. */ 248}; 249 250/* Values for per-channel state. */ 251#define STATE_WFH 0 /* Waiting for HOST. */ 252#define STATE_WFN 1 /* Waiting for NET. */ 253#define STATE_READY 2 /* Ready. */ 254 255struct myri_shmem { 256 u8 addr[8]; /* Board's address. */ 257 u32 nchan; /* Number of channels. */ 258 u32 burst; /* SBUS dma burst enable. */ 259 u32 shakedown; /* DarkkkkStarrr Crashesss... */ 260 u32 send; /* Send wanted. */ 261 u32 imask; /* Interrupt enable mask. */ 262 u32 mlevel; /* Map level. */ 263 u32 debug[4]; /* Misc. debug areas. */ 264 struct myri_channel channel; /* Only one channel on a host. */ 265}; 266 267struct myri_eth { 268 /* These are frequently accessed, keep together 269 * to obtain good cache hit rates. 270 */ 271 spinlock_t irq_lock; 272 struct myri_shmem __iomem *shmem; /* Shared data structures. */ 273 void __iomem *cregs; /* Control register space. */ 274 struct recvq __iomem *rqack; /* Where we ack rx's. */ 275 struct recvq __iomem *rq; /* Where we put buffers. */ 276 struct sendq __iomem *sq; /* Where we stuff tx's. */ 277 struct net_device *dev; /* Linux/NET dev struct. */ 278 int tx_old; /* To speed up tx cleaning. */ 279 void __iomem *lregs; /* Quick ptr to LANAI regs. */ 280 struct sk_buff *rx_skbs[RX_RING_SIZE+1];/* RX skb's */ 281 struct sk_buff *tx_skbs[TX_RING_SIZE]; /* TX skb's */ 282 struct net_device_stats enet_stats; /* Interface stats. */ 283 284 /* These are less frequently accessed. */ 285 void __iomem *regs; /* MyriCOM register space. */ 286 void __iomem *lanai; /* View 2 of register space. */ 287 unsigned int myri_bursts; /* SBUS bursts. */ 288 struct myri_eeprom eeprom; /* Local copy of EEPROM. */ 289 unsigned int reg_size; /* Size of register space. */ 290 unsigned int shmem_base; /* Offset to shared ram. */ 291 struct sbus_dev *myri_sdev; /* Our SBUS device struct. */ 292}; 293 294/* We use this to acquire receive skb's that we can DMA directly into. */ 295#define ALIGNED_RX_SKB_ADDR(addr) \ 296 ((((unsigned long)(addr) + (64 - 1)) & ~(64 - 1)) - (unsigned long)(addr)) 297static inline struct sk_buff *myri_alloc_skb(unsigned int length, gfp_t gfp_flags) 298{ 299 struct sk_buff *skb; 300 301 skb = alloc_skb(length + 64, gfp_flags); 302 if(skb) { 303 int offset = ALIGNED_RX_SKB_ADDR(skb->data); 304 305 if(offset) 306 skb_reserve(skb, offset); 307 } 308 return skb; 309} 310 311#endif /* !(_MYRI_SBUS_H) */ 312