1# 2# Multimedia Video device configuration 3# 4 5menuconfig RADIO_ADAPTERS 6 bool "Radio Adapters" 7 depends on VIDEO_DEV 8 default y 9 ---help--- 10 Say Y here to enable selecting AM/FM radio adapters. 11 12if RADIO_ADAPTERS && VIDEO_DEV 13 14config RADIO_CADET 15 tristate "ADS Cadet AM/FM Tuner" 16 depends on ISA && VIDEO_V4L2 17 ---help--- 18 Choose Y here if you have one of these AM/FM radio cards, and then 19 fill in the port address below. 20 21 In order to control your radio card, you will need to use programs 22 that are compatible with the Video For Linux API. Information on 23 this API and pointers to "v4l" programs may be found at 24 <file:Documentation/video4linux/API.html>. 25 26 Further documentation on this driver can be found on the WWW at 27 <http://linux.blackhawke.net/cadet/>. 28 29 To compile this driver as a module, choose M here: the 30 module will be called radio-cadet. 31 32config RADIO_RTRACK 33 tristate "AIMSlab RadioTrack (aka RadioReveal) support" 34 depends on ISA && VIDEO_V4L2 35 ---help--- 36 Choose Y here if you have one of these FM radio cards, and then fill 37 in the port address below. 38 39 Note that newer AIMSlab RadioTrack cards have a different chipset 40 and are not supported by this driver. For these cards, use the 41 RadioTrack II driver below. 42 43 If you have a GemTeks combined (PnP) sound- and radio card you must 44 use this driver as a module and setup the card with isapnptools. 45 You must also pass the module a suitable io parameter, 0x248 has 46 been reported to be used by these cards. 47 48 In order to control your radio card, you will need to use programs 49 that are compatible with the Video For Linux API. Information on 50 this API and pointers to "v4l" programs may be found at 51 <file:Documentation/video4linux/API.html>. More information is 52 contained in the file 53 <file:Documentation/video4linux/radiotrack.txt>. 54 55 To compile this driver as a module, choose M here: the 56 module will be called radio-aimslab. 57 58config RADIO_RTRACK_PORT 59 hex "RadioTrack i/o port (0x20f or 0x30f)" 60 depends on RADIO_RTRACK=y 61 default "20f" 62 help 63 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you 64 haven't changed the jumper setting on the card. 65 66config RADIO_RTRACK2 67 tristate "AIMSlab RadioTrack II support" 68 depends on ISA && VIDEO_V4L2 69 ---help--- 70 Choose Y here if you have this FM radio card, and then fill in the 71 port address below. 72 73 In order to control your radio card, you will need to use programs 74 that are compatible with the Video For Linux API. Information on 75 this API and pointers to "v4l" programs may be found at 76 <file:Documentation/video4linux/API.html>. 77 78 To compile this driver as a module, choose M here: the 79 module will be called radio-rtrack2. 80 81config RADIO_RTRACK2_PORT 82 hex "RadioTrack II i/o port (0x20c or 0x30c)" 83 depends on RADIO_RTRACK2=y 84 default "30c" 85 help 86 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you 87 haven't changed the jumper setting on the card. 88 89config RADIO_AZTECH 90 tristate "Aztech/Packard Bell Radio" 91 depends on ISA && VIDEO_V4L2 92 ---help--- 93 Choose Y here if you have one of these FM radio cards, and then fill 94 in the port address below. 95 96 In order to control your radio card, you will need to use programs 97 that are compatible with the Video For Linux API. Information on 98 this API and pointers to "v4l" programs may be found at 99 <file:Documentation/video4linux/API.html>. 100 101 To compile this driver as a module, choose M here: the 102 module will be called radio-aztech. 103 104config RADIO_AZTECH_PORT 105 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" 106 depends on RADIO_AZTECH=y 107 default "350" 108 help 109 Enter either 0x350 or 0x358 here. The card default is 0x350, if you 110 haven't changed the setting of jumper JP3 on the card. Removing the 111 jumper sets the card to 0x358. 112 113config RADIO_GEMTEK 114 tristate "GemTek Radio Card support" 115 depends on ISA && VIDEO_V4L2 116 ---help--- 117 Choose Y here if you have this FM radio card, and then fill in the 118 port address below. 119 120 In order to control your radio card, you will need to use programs 121 that are compatible with the Video For Linux API. Information on 122 this API and pointers to "v4l" programs may be found at 123 <file:Documentation/video4linux/API.html>. 124 125 To compile this driver as a module, choose M here: the 126 module will be called radio-gemtek. 127 128config RADIO_GEMTEK_PORT 129 hex "GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)" 130 depends on RADIO_GEMTEK=y 131 default "34c" 132 help 133 Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is 134 0x34c, if you haven't changed the jumper setting on the card. On 135 Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O 136 port is 0x28c. 137 138config RADIO_GEMTEK_PCI 139 tristate "GemTek PCI Radio Card support" 140 depends on VIDEO_V4L2 && PCI 141 ---help--- 142 Choose Y here if you have this PCI FM radio card. 143 144 In order to control your radio card, you will need to use programs 145 that are compatible with the Video for Linux API. Information on 146 this API and pointers to "v4l" programs may be found at 147 <file:Documentation/video4linux/API.html>. 148 149 To compile this driver as a module, choose M here: the 150 module will be called radio-gemtek-pci. 151 152config RADIO_MAXIRADIO 153 tristate "Guillemot MAXI Radio FM 2000 radio" 154 depends on VIDEO_V4L2 && PCI 155 ---help--- 156 Choose Y here if you have this radio card. This card may also be 157 found as Gemtek PCI FM. 158 159 In order to control your radio card, you will need to use programs 160 that are compatible with the Video For Linux API. Information on 161 this API and pointers to "v4l" programs may be found at 162 <file:Documentation/video4linux/API.html>. 163 164 To compile this driver as a module, choose M here: the 165 module will be called radio-maxiradio. 166 167config RADIO_MAESTRO 168 tristate "Maestro on board radio" 169 depends on VIDEO_V4L2 && PCI 170 ---help--- 171 Say Y here to directly support the on-board radio tuner on the 172 Maestro 2 or 2E sound card. 173 174 In order to control your radio card, you will need to use programs 175 that are compatible with the Video For Linux API. Information on 176 this API and pointers to "v4l" programs may be found at 177 <file:Documentation/video4linux/API.html>. 178 179 To compile this driver as a module, choose M here: the 180 module will be called radio-maestro. 181 182config RADIO_SF16FMI 183 tristate "SF16FMI Radio" 184 depends on ISA && VIDEO_V4L2 185 ---help--- 186 Choose Y here if you have one of these FM radio cards. If you 187 compile the driver into the kernel and your card is not PnP one, you 188 have to add "sf16fm=<io>" to the kernel command line (I/O address is 189 0x284 or 0x384). 190 191 In order to control your radio card, you will need to use programs 192 that are compatible with the Video For Linux API. Information on 193 this API and pointers to "v4l" programs may be found at 194 <file:Documentation/video4linux/API.html>. 195 196 To compile this driver as a module, choose M here: the 197 module will be called radio-sf16fmi. 198 199config RADIO_SF16FMR2 200 tristate "SF16FMR2 Radio" 201 depends on ISA && VIDEO_V4L2 202 ---help--- 203 Choose Y here if you have one of these FM radio cards. 204 205 In order to control your radio card, you will need to use programs 206 that are compatible with the Video For Linux API. Information on 207 this API and pointers to "v4l" programs may be found on the WWW at 208 <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. 209 210 To compile this driver as a module, choose M here: the 211 module will be called radio-sf16fmr2. 212 213config RADIO_TERRATEC 214 tristate "TerraTec ActiveRadio ISA Standalone" 215 depends on ISA && VIDEO_V4L2 216 ---help--- 217 Choose Y here if you have this FM radio card, and then fill in the 218 port address below. (TODO) 219 220 Note: This driver is in its early stages. Right now volume and 221 frequency control and muting works at least for me, but 222 unfortunately I have not found anybody who wants to use this card 223 with Linux. So if it is this what YOU are trying to do right now, 224 PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>. 225 226 In order to control your radio card, you will need to use programs 227 that are compatible with the Video For Linux API. Information on 228 this API and pointers to "v4l" programs may be found at 229 <file:Documentation/video4linux/API.html>. 230 231 To compile this driver as a module, choose M here: the 232 module will be called radio-terratec. 233 234config RADIO_TERRATEC_PORT 235 hex "Terratec i/o port (normally 0x590)" 236 depends on RADIO_TERRATEC=y 237 default "590" 238 help 239 Fill in the I/O port of your TerraTec FM radio card. If unsure, go 240 with the default. 241 242config RADIO_TRUST 243 tristate "Trust FM radio card" 244 depends on ISA && VIDEO_V4L2 245 help 246 This is a driver for the Trust FM radio cards. Say Y if you have 247 such a card and want to use it under Linux. 248 249 To compile this driver as a module, choose M here: the 250 module will be called radio-trust. 251 252config RADIO_TRUST_PORT 253 hex "Trust i/o port (usually 0x350 or 0x358)" 254 depends on RADIO_TRUST=y 255 default "350" 256 help 257 Enter the I/O port of your Trust FM radio card. If unsure, try the 258 values "0x350" or "0x358". 259 260config RADIO_TYPHOON 261 tristate "Typhoon Radio (a.k.a. EcoRadio)" 262 depends on ISA && VIDEO_V4L2 263 ---help--- 264 Choose Y here if you have one of these FM radio cards, and then fill 265 in the port address and the frequency used for muting below. 266 267 In order to control your radio card, you will need to use programs 268 that are compatible with the Video For Linux API. Information on 269 this API and pointers to "v4l" programs may be found at 270 <file:Documentation/video4linux/API.html>. 271 272 To compile this driver as a module, choose M here: the 273 module will be called radio-typhoon. 274 275config RADIO_TYPHOON_PROC_FS 276 bool "Support for /proc/radio-typhoon" 277 depends on PROC_FS && RADIO_TYPHOON 278 help 279 Say Y here if you want the typhoon radio card driver to write 280 status information (frequency, volume, muted, mute frequency, 281 base address) to /proc/radio-typhoon. The file can be viewed with 282 your favorite pager (i.e. use "more /proc/radio-typhoon" or "less 283 /proc/radio-typhoon" or simply "cat /proc/radio-typhoon"). 284 285config RADIO_TYPHOON_PORT 286 hex "Typhoon I/O port (0x316 or 0x336)" 287 depends on RADIO_TYPHOON=y 288 default "316" 289 help 290 Enter the I/O port of your Typhoon or EcoRadio radio card. 291 292config RADIO_TYPHOON_MUTEFREQ 293 int "Typhoon frequency set when muting the device (kHz)" 294 depends on RADIO_TYPHOON=y 295 default "87500" 296 help 297 Enter the frequency used for muting the radio. The device is never 298 completely silent. If the volume is just turned down, you can still 299 hear silent voices and music. For that reason, the frequency of the 300 radio device is set to the frequency you can enter here whenever 301 the device is muted. There should be no local radio station at that 302 frequency. 303 304config RADIO_ZOLTRIX 305 tristate "Zoltrix Radio" 306 depends on ISA && VIDEO_V4L2 307 ---help--- 308 Choose Y here if you have one of these FM radio cards, and then fill 309 in the port address below. 310 311 In order to control your radio card, you will need to use programs 312 that are compatible with the Video For Linux API. Information on 313 this API and pointers to "v4l" programs may be found at 314 <file:Documentation/video4linux/API.html>. 315 316 To compile this driver as a module, choose M here: the 317 module will be called radio-zoltrix. 318 319config RADIO_ZOLTRIX_PORT 320 hex "ZOLTRIX I/O port (0x20c or 0x30c)" 321 depends on RADIO_ZOLTRIX=y 322 default "20c" 323 help 324 Enter the I/O port of your Zoltrix radio card. 325 326config USB_DSBR 327 tristate "D-Link USB FM radio support (EXPERIMENTAL)" 328 depends on USB && VIDEO_V4L2 && EXPERIMENTAL 329 ---help--- 330 Say Y here if you want to connect this type of radio to your 331 computer's USB port. Note that the audio is not digital, and 332 you must connect the line out connector to a sound card or a 333 set of speakers. 334 335 To compile this driver as a module, choose M here: the 336 module will be called dsbr100. 337 338endif # RADIO_ADAPTERS 339