1/* $Id: hysdn_sched.c,v 1.1.1.1 2007/08/03 18:52:36 Exp $
2 *
3 * Linux driver for HYSDN cards
4 * scheduler routines for handling exchange card <-> pc.
5 *
6 * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
7 * Copyright 1999 by Werner Cornelius (werner@titro.de)
8 *
9 * This software may be used and distributed according to the terms
10 * of the GNU General Public License, incorporated herein by reference.
11 *
12 */
13
14#include <linux/signal.h>
15#include <linux/kernel.h>
16#include <linux/ioport.h>
17#include <linux/interrupt.h>
18#include <linux/delay.h>
19#include <asm/io.h>
20
21#include "hysdn_defs.h"
22
23/*****************************************************************************/
24/* hysdn_sched_rx is called from the cards handler to announce new data is   */
25/* available from the card. The routine has to handle the data and return    */
26/* with a nonzero code if the data could be worked (or even thrown away), if */
27/* no room to buffer the data is available a zero return tells the card      */
28/* to keep the data until later.                                             */
29/*****************************************************************************/
30int
31hysdn_sched_rx(hysdn_card *card, unsigned char *buf, unsigned short len,
32			unsigned short chan)
33{
34
35	switch (chan) {
36		case CHAN_NDIS_DATA:
37			if (hynet_enable & (1 << card->myid)) {
38                          /* give packet to network handler */
39				hysdn_rx_netpkt(card, buf, len);
40			}
41			break;
42
43		case CHAN_ERRLOG:
44			hysdn_card_errlog(card, (tErrLogEntry *) buf, len);
45			if (card->err_log_state == ERRLOG_STATE_ON)
46				card->err_log_state = ERRLOG_STATE_START;	/* start new fetch */
47			break;
48#ifdef CONFIG_HYSDN_CAPI
49         	case CHAN_CAPI:
50/* give packet to CAPI handler */
51			if (hycapi_enable & (1 << card->myid)) {
52				hycapi_rx_capipkt(card, buf, len);
53			}
54			break;
55#endif /* CONFIG_HYSDN_CAPI */
56		default:
57			printk(KERN_INFO "irq message channel %d len %d unhandled \n", chan, len);
58			break;
59
60	}			/* switch rx channel */
61
62	return (1);		/* always handled */
63}				/* hysdn_sched_rx */
64
65/*****************************************************************************/
66/* hysdn_sched_tx is called from the cards handler to announce that there is */
67/* room in the tx-buffer to the card and data may be sent if needed.         */
68/* If the routine wants to send data it must fill buf, len and chan with the */
69/* appropriate data and return a nonzero value. With a zero return no new    */
70/* data to send is assumed. maxlen specifies the buffer size available for   */
71/* sending.                                                                  */
72/*****************************************************************************/
73int
74hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
75		unsigned short volatile *len, unsigned short volatile *chan,
76		unsigned short maxlen)
77{
78	struct sk_buff *skb;
79
80	if (card->net_tx_busy) {
81		card->net_tx_busy = 0;	/* reset flag */
82		hysdn_tx_netack(card);	/* acknowledge packet send */
83	}			/* a network packet has completely been transferred */
84	/* first of all async requests are handled */
85	if (card->async_busy) {
86		if (card->async_len <= maxlen) {
87			memcpy(buf, card->async_data, card->async_len);
88			*len = card->async_len;
89			*chan = card->async_channel;
90			card->async_busy = 0;	/* reset request */
91			return (1);
92		}
93		card->async_busy = 0;	/* in case of length error */
94	}			/* async request */
95	if ((card->err_log_state == ERRLOG_STATE_START) &&
96	    (maxlen >= ERRLOG_CMD_REQ_SIZE)) {
97		strcpy(buf, ERRLOG_CMD_REQ);	/* copy the command */
98		*len = ERRLOG_CMD_REQ_SIZE;	/* buffer length */
99		*chan = CHAN_ERRLOG;	/* and channel */
100		card->err_log_state = ERRLOG_STATE_ON;	/* new state is on */
101		return (1);	/* tell that data should be send */
102	}			/* error log start and able to send */
103	if ((card->err_log_state == ERRLOG_STATE_STOP) &&
104	    (maxlen >= ERRLOG_CMD_STOP_SIZE)) {
105		strcpy(buf, ERRLOG_CMD_STOP);	/* copy the command */
106		*len = ERRLOG_CMD_STOP_SIZE;	/* buffer length */
107		*chan = CHAN_ERRLOG;	/* and channel */
108		card->err_log_state = ERRLOG_STATE_OFF;		/* new state is off */
109		return (1);	/* tell that data should be send */
110	}			/* error log start and able to send */
111	/* now handle network interface packets */
112	if ((hynet_enable & (1 << card->myid)) &&
113	    (skb = hysdn_tx_netget(card)) != NULL)
114	{
115		if (skb->len <= maxlen) {
116			/* copy the packet to the buffer */
117			skb_copy_from_linear_data(skb, buf, skb->len);
118			*len = skb->len;
119			*chan = CHAN_NDIS_DATA;
120			card->net_tx_busy = 1;	/* we are busy sending network data */
121			return (1);	/* go and send the data */
122		} else
123			hysdn_tx_netack(card);	/* aknowledge packet -> throw away */
124	}			/* send a network packet if available */
125#ifdef CONFIG_HYSDN_CAPI
126	if( ((hycapi_enable & (1 << card->myid))) &&
127	    ((skb = hycapi_tx_capiget(card)) != NULL) )
128	{
129		if (skb->len <= maxlen) {
130			skb_copy_from_linear_data(skb, buf, skb->len);
131			*len = skb->len;
132			*chan = CHAN_CAPI;
133			hycapi_tx_capiack(card);
134			return (1);	/* go and send the data */
135		}
136	}
137#endif /* CONFIG_HYSDN_CAPI */
138	return (0);		/* nothing to send */
139}				/* hysdn_sched_tx */
140
141
142/*****************************************************************************/
143/* send one config line to the card and return 0 if successful, otherwise a */
144/* negative error code.                                                      */
145/* The function works with timeouts perhaps not giving the greatest speed    */
146/* sending the line, but this should be meaningless beacuse only some lines  */
147/* are to be sent and this happens very seldom.                              */
148/*****************************************************************************/
149int
150hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan)
151{
152	int cnt = 50;		/* timeout intervalls */
153	unsigned long flags;
154
155	if (card->debug_flags & LOG_SCHED_ASYN)
156		hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1);
157
158	while (card->async_busy) {
159
160		if (card->debug_flags & LOG_SCHED_ASYN)
161			hysdn_addlog(card, "async tx-cfg delayed");
162
163		msleep_interruptible(20);		/* Timeout 20ms */
164		if (!--cnt)
165			return (-ERR_ASYNC_TIME);	/* timed out */
166	}			/* wait for buffer to become free */
167
168	spin_lock_irqsave(&card->hysdn_lock, flags);
169	strcpy(card->async_data, line);
170	card->async_len = strlen(line) + 1;
171	card->async_channel = chan;
172	card->async_busy = 1;	/* request transfer */
173
174	/* now queue the task */
175	schedule_work(&card->irq_queue);
176	spin_unlock_irqrestore(&card->hysdn_lock, flags);
177
178	if (card->debug_flags & LOG_SCHED_ASYN)
179		hysdn_addlog(card, "async tx-cfg data queued");
180
181	cnt++;			/* short delay */
182
183	while (card->async_busy) {
184
185		if (card->debug_flags & LOG_SCHED_ASYN)
186			hysdn_addlog(card, "async tx-cfg waiting for tx-ready");
187
188		msleep_interruptible(20);		/* Timeout 20ms */
189		if (!--cnt)
190			return (-ERR_ASYNC_TIME);	/* timed out */
191	}			/* wait for buffer to become free again */
192
193	if (card->debug_flags & LOG_SCHED_ASYN)
194		hysdn_addlog(card, "async tx-cfg data send");
195
196	return (0);		/* line send correctly */
197}				/* hysdn_tx_cfgline */
198