1/* apps/ecparam.c */
2/*
3 * Written by Nils Larsch for the OpenSSL project.
4 */
5/* ====================================================================
6 * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 *
12 * 1. Redistributions of source code must retain the above copyright
13 *    notice, this list of conditions and the following disclaimer.
14 *
15 * 2. Redistributions in binary form must reproduce the above copyright
16 *    notice, this list of conditions and the following disclaimer in
17 *    the documentation and/or other materials provided with the
18 *    distribution.
19 *
20 * 3. All advertising materials mentioning features or use of this
21 *    software must display the following acknowledgment:
22 *    "This product includes software developed by the OpenSSL Project
23 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
24 *
25 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
26 *    endorse or promote products derived from this software without
27 *    prior written permission. For written permission, please contact
28 *    openssl-core@openssl.org.
29 *
30 * 5. Products derived from this software may not be called "OpenSSL"
31 *    nor may "OpenSSL" appear in their names without prior written
32 *    permission of the OpenSSL Project.
33 *
34 * 6. Redistributions of any form whatsoever must retain the following
35 *    acknowledgment:
36 *    "This product includes software developed by the OpenSSL Project
37 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
38 *
39 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
40 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
41 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
42 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
43 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
44 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
45 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
46 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
47 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
48 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
49 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
50 * OF THE POSSIBILITY OF SUCH DAMAGE.
51 * ====================================================================
52 *
53 * This product includes cryptographic software written by Eric Young
54 * (eay@cryptsoft.com).  This product includes software written by Tim
55 * Hudson (tjh@cryptsoft.com).
56 *
57 */
58/* ====================================================================
59 * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
60 *
61 * Portions of the attached software ("Contribution") are developed by
62 * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
63 *
64 * The Contribution is licensed pursuant to the OpenSSL open source
65 * license provided above.
66 *
67 * The elliptic curve binary polynomial software is originally written by
68 * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
69 *
70 */
71
72#include <openssl/opensslconf.h>
73#ifndef OPENSSL_NO_EC
74#include <assert.h>
75#include <stdio.h>
76#include <stdlib.h>
77#include <time.h>
78#include <string.h>
79#include "apps.h"
80#include <openssl/bio.h>
81#include <openssl/err.h>
82#include <openssl/bn.h>
83#include <openssl/ec.h>
84#include <openssl/x509.h>
85#include <openssl/pem.h>
86
87#undef PROG
88#define PROG	ecparam_main
89
90/* -inform arg      - input format - default PEM (DER or PEM)
91 * -outform arg     - output format - default PEM
92 * -in  arg         - input file  - default stdin
93 * -out arg         - output file - default stdout
94 * -noout           - do not print the ec parameter
95 * -text            - print the ec parameters in text form
96 * -check           - validate the ec parameters
97 * -C               - print a 'C' function creating the parameters
98 * -name arg        - use the ec parameters with 'short name' name
99 * -list_curves     - prints a list of all currently available curve 'short names'
100 * -conv_form arg   - specifies the point conversion form
101 *                  - possible values: compressed
102 *                                     uncompressed (default)
103 *                                     hybrid
104 * -param_enc arg   - specifies the way the ec parameters are encoded
105 *                    in the asn1 der encoding
106 *                    possible values: named_curve (default)
107 *                                     explicit
108 * -no_seed         - if 'explicit' parameters are choosen do not use the seed
109 * -genkey          - generate ec key
110 * -rand file       - files to use for random number input
111 * -engine e        - use engine e, possibly a hardware device
112 */
113
114
115static int ecparam_print_var(BIO *,BIGNUM *,const char *,int,unsigned char *);
116
117int MAIN(int, char **);
118
119int MAIN(int argc, char **argv)
120	{
121	EC_GROUP *group = NULL;
122	point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED;
123	int 	new_form = 0;
124	int 	asn1_flag = OPENSSL_EC_NAMED_CURVE;
125	int 	new_asn1_flag = 0;
126	char 	*curve_name = NULL, *inrand = NULL;
127	int	list_curves = 0, no_seed = 0, check = 0,
128		badops = 0, text = 0, i, need_rand = 0, genkey = 0;
129	char	*infile = NULL, *outfile = NULL, *prog;
130	BIO 	*in = NULL, *out = NULL;
131	int 	informat, outformat, noout = 0, C = 0, ret = 1;
132#ifndef OPENSSL_NO_ENGINE
133	ENGINE	*e = NULL;
134#endif
135	char	*engine = NULL;
136
137	BIGNUM	*ec_p = NULL, *ec_a = NULL, *ec_b = NULL,
138		*ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL;
139	unsigned char *buffer = NULL;
140
141	apps_startup();
142
143	if (bio_err == NULL)
144		if ((bio_err=BIO_new(BIO_s_file())) != NULL)
145			BIO_set_fp(bio_err,stderr,BIO_NOCLOSE|BIO_FP_TEXT);
146
147	if (!load_config(bio_err, NULL))
148		goto end;
149
150	informat=FORMAT_PEM;
151	outformat=FORMAT_PEM;
152
153	prog=argv[0];
154	argc--;
155	argv++;
156	while (argc >= 1)
157		{
158		if 	(strcmp(*argv,"-inform") == 0)
159			{
160			if (--argc < 1) goto bad;
161			informat=str2fmt(*(++argv));
162			}
163		else if (strcmp(*argv,"-outform") == 0)
164			{
165			if (--argc < 1) goto bad;
166			outformat=str2fmt(*(++argv));
167			}
168		else if (strcmp(*argv,"-in") == 0)
169			{
170			if (--argc < 1) goto bad;
171			infile= *(++argv);
172			}
173		else if (strcmp(*argv,"-out") == 0)
174			{
175			if (--argc < 1) goto bad;
176			outfile= *(++argv);
177			}
178		else if (strcmp(*argv,"-text") == 0)
179			text = 1;
180		else if (strcmp(*argv,"-C") == 0)
181			C = 1;
182		else if (strcmp(*argv,"-check") == 0)
183			check = 1;
184		else if (strcmp (*argv, "-name") == 0)
185			{
186			if (--argc < 1)
187				goto bad;
188			curve_name = *(++argv);
189			}
190		else if (strcmp(*argv, "-list_curves") == 0)
191			list_curves = 1;
192		else if (strcmp(*argv, "-conv_form") == 0)
193			{
194			if (--argc < 1)
195				goto bad;
196			++argv;
197			new_form = 1;
198			if (strcmp(*argv, "compressed") == 0)
199				form = POINT_CONVERSION_COMPRESSED;
200			else if (strcmp(*argv, "uncompressed") == 0)
201				form = POINT_CONVERSION_UNCOMPRESSED;
202			else if (strcmp(*argv, "hybrid") == 0)
203				form = POINT_CONVERSION_HYBRID;
204			else
205				goto bad;
206			}
207		else if (strcmp(*argv, "-param_enc") == 0)
208			{
209			if (--argc < 1)
210				goto bad;
211			++argv;
212			new_asn1_flag = 1;
213			if (strcmp(*argv, "named_curve") == 0)
214				asn1_flag = OPENSSL_EC_NAMED_CURVE;
215			else if (strcmp(*argv, "explicit") == 0)
216				asn1_flag = 0;
217			else
218				goto bad;
219			}
220		else if (strcmp(*argv, "-no_seed") == 0)
221			no_seed = 1;
222		else if (strcmp(*argv, "-noout") == 0)
223			noout=1;
224		else if (strcmp(*argv,"-genkey") == 0)
225			{
226			genkey=1;
227			need_rand=1;
228			}
229		else if (strcmp(*argv, "-rand") == 0)
230			{
231			if (--argc < 1) goto bad;
232			inrand= *(++argv);
233			need_rand=1;
234			}
235		else if(strcmp(*argv, "-engine") == 0)
236			{
237			if (--argc < 1) goto bad;
238			engine = *(++argv);
239			}
240		else
241			{
242			BIO_printf(bio_err,"unknown option %s\n",*argv);
243			badops=1;
244			break;
245			}
246		argc--;
247		argv++;
248		}
249
250	if (badops)
251		{
252bad:
253		BIO_printf(bio_err, "%s [options] <infile >outfile\n",prog);
254		BIO_printf(bio_err, "where options are\n");
255		BIO_printf(bio_err, " -inform arg       input format - "
256				"default PEM (DER or PEM)\n");
257		BIO_printf(bio_err, " -outform arg      output format - "
258				"default PEM\n");
259		BIO_printf(bio_err, " -in  arg          input file  - "
260				"default stdin\n");
261		BIO_printf(bio_err, " -out arg          output file - "
262				"default stdout\n");
263		BIO_printf(bio_err, " -noout            do not print the "
264				"ec parameter\n");
265		BIO_printf(bio_err, " -text             print the ec "
266				"parameters in text form\n");
267		BIO_printf(bio_err, " -check            validate the ec "
268				"parameters\n");
269		BIO_printf(bio_err, " -C                print a 'C' "
270				"function creating the parameters\n");
271		BIO_printf(bio_err, " -name arg         use the "
272				"ec parameters with 'short name' name\n");
273		BIO_printf(bio_err, " -list_curves      prints a list of "
274				"all currently available curve 'short names'\n");
275		BIO_printf(bio_err, " -conv_form arg    specifies the "
276				"point conversion form \n");
277		BIO_printf(bio_err, "                   possible values:"
278				" compressed\n");
279		BIO_printf(bio_err, "                                   "
280				" uncompressed (default)\n");
281		BIO_printf(bio_err, "                                   "
282				" hybrid\n");
283		BIO_printf(bio_err, " -param_enc arg    specifies the way"
284				" the ec parameters are encoded\n");
285		BIO_printf(bio_err, "                   in the asn1 der "
286				"encoding\n");
287		BIO_printf(bio_err, "                   possible values:"
288				" named_curve (default)\n");
289		BIO_printf(bio_err, "                                   "
290				" explicit\n");
291		BIO_printf(bio_err, " -no_seed          if 'explicit'"
292				" parameters are choosen do not"
293				" use the seed\n");
294		BIO_printf(bio_err, " -genkey           generate ec"
295				" key\n");
296		BIO_printf(bio_err, " -rand file        files to use for"
297				" random number input\n");
298		BIO_printf(bio_err, " -engine e         use engine e, "
299				"possibly a hardware device\n");
300		goto end;
301		}
302
303	ERR_load_crypto_strings();
304
305	in=BIO_new(BIO_s_file());
306	out=BIO_new(BIO_s_file());
307	if ((in == NULL) || (out == NULL))
308		{
309		ERR_print_errors(bio_err);
310		goto end;
311		}
312
313	if (infile == NULL)
314		BIO_set_fp(in,stdin,BIO_NOCLOSE);
315	else
316		{
317		if (BIO_read_filename(in,infile) <= 0)
318			{
319			perror(infile);
320			goto end;
321			}
322		}
323	if (outfile == NULL)
324		{
325		BIO_set_fp(out,stdout,BIO_NOCLOSE);
326#ifdef OPENSSL_SYS_VMS
327		{
328		BIO *tmpbio = BIO_new(BIO_f_linebuffer());
329		out = BIO_push(tmpbio, out);
330		}
331#endif
332		}
333	else
334		{
335		if (BIO_write_filename(out,outfile) <= 0)
336			{
337			perror(outfile);
338			goto end;
339			}
340		}
341
342#ifndef OPENSSL_NO_ENGINE
343	e = setup_engine(bio_err, engine, 0);
344#endif
345
346	if (list_curves)
347		{
348		EC_builtin_curve *curves = NULL;
349		size_t crv_len = 0;
350		size_t n = 0;
351
352		crv_len = EC_get_builtin_curves(NULL, 0);
353
354		curves = OPENSSL_malloc((int)(sizeof(EC_builtin_curve) * crv_len));
355
356		if (curves == NULL)
357			goto end;
358
359		if (!EC_get_builtin_curves(curves, crv_len))
360			{
361			OPENSSL_free(curves);
362			goto end;
363			}
364
365
366		for (n = 0; n < crv_len; n++)
367			{
368			const char *comment;
369			const char *sname;
370			comment = curves[n].comment;
371			sname   = OBJ_nid2sn(curves[n].nid);
372			if (comment == NULL)
373				comment = "CURVE DESCRIPTION NOT AVAILABLE";
374			if (sname == NULL)
375				sname = "";
376
377			BIO_printf(out, "  %-10s: ", sname);
378			BIO_printf(out, "%s\n", comment);
379			}
380
381		OPENSSL_free(curves);
382		ret = 0;
383		goto end;
384		}
385
386	if (curve_name != NULL)
387		{
388		int nid;
389
390		/* workaround for the SECG curve names secp192r1
391		 * and secp256r1 (which are the same as the curves
392		 * prime192v1 and prime256v1 defined in X9.62)
393		 */
394		if (!strcmp(curve_name, "secp192r1"))
395			{
396			BIO_printf(bio_err, "using curve name prime192v1 "
397				"instead of secp192r1\n");
398			nid = NID_X9_62_prime192v1;
399			}
400		else if (!strcmp(curve_name, "secp256r1"))
401			{
402			BIO_printf(bio_err, "using curve name prime256v1 "
403				"instead of secp256r1\n");
404			nid = NID_X9_62_prime256v1;
405			}
406		else
407			nid = OBJ_sn2nid(curve_name);
408
409		if (nid == 0)
410			{
411			BIO_printf(bio_err, "unknown curve name (%s)\n",
412				curve_name);
413			goto end;
414			}
415
416		group = EC_GROUP_new_by_curve_name(nid);
417		if (group == NULL)
418			{
419			BIO_printf(bio_err, "unable to create curve (%s)\n",
420				curve_name);
421			goto end;
422			}
423		EC_GROUP_set_asn1_flag(group, asn1_flag);
424		EC_GROUP_set_point_conversion_form(group, form);
425		}
426	else if (informat == FORMAT_ASN1)
427		{
428		group = d2i_ECPKParameters_bio(in, NULL);
429		}
430	else if (informat == FORMAT_PEM)
431		{
432		group = PEM_read_bio_ECPKParameters(in,NULL,NULL,NULL);
433		}
434	else
435		{
436		BIO_printf(bio_err, "bad input format specified\n");
437		goto end;
438		}
439
440	if (group == NULL)
441		{
442		BIO_printf(bio_err,
443			"unable to load elliptic curve parameters\n");
444		ERR_print_errors(bio_err);
445		goto end;
446		}
447
448	if (new_form)
449		EC_GROUP_set_point_conversion_form(group, form);
450
451	if (new_asn1_flag)
452		EC_GROUP_set_asn1_flag(group, asn1_flag);
453
454	if (no_seed)
455		{
456		EC_GROUP_set_seed(group, NULL, 0);
457		}
458
459	if (text)
460		{
461		if (!ECPKParameters_print(out, group, 0))
462			goto end;
463		}
464
465	if (check)
466		{
467		if (group == NULL)
468			BIO_printf(bio_err, "no elliptic curve parameters\n");
469		BIO_printf(bio_err, "checking elliptic curve parameters: ");
470		if (!EC_GROUP_check(group, NULL))
471			{
472			BIO_printf(bio_err, "failed\n");
473			ERR_print_errors(bio_err);
474			}
475		else
476			BIO_printf(bio_err, "ok\n");
477
478		}
479
480	if (C)
481		{
482		size_t	buf_len = 0, tmp_len = 0;
483		const EC_POINT *point;
484		int	is_prime, len = 0;
485		const EC_METHOD *meth = EC_GROUP_method_of(group);
486
487		if ((ec_p = BN_new()) == NULL || (ec_a = BN_new()) == NULL ||
488		    (ec_b = BN_new()) == NULL || (ec_gen = BN_new()) == NULL ||
489		    (ec_order = BN_new()) == NULL ||
490		    (ec_cofactor = BN_new()) == NULL )
491			{
492			perror("OPENSSL_malloc");
493			goto end;
494			}
495
496		is_prime = (EC_METHOD_get_field_type(meth) ==
497			NID_X9_62_prime_field);
498
499		if (is_prime)
500			{
501			if (!EC_GROUP_get_curve_GFp(group, ec_p, ec_a,
502				ec_b, NULL))
503				goto end;
504			}
505		else
506			{
507			/* TODO */
508			goto end;
509			}
510
511		if ((point = EC_GROUP_get0_generator(group)) == NULL)
512			goto end;
513		if (!EC_POINT_point2bn(group, point,
514			EC_GROUP_get_point_conversion_form(group), ec_gen,
515			NULL))
516			goto end;
517		if (!EC_GROUP_get_order(group, ec_order, NULL))
518			goto end;
519		if (!EC_GROUP_get_cofactor(group, ec_cofactor, NULL))
520			goto end;
521
522		if (!ec_p || !ec_a || !ec_b || !ec_gen ||
523			!ec_order || !ec_cofactor)
524			goto end;
525
526		len = BN_num_bits(ec_order);
527
528		if ((tmp_len = (size_t)BN_num_bytes(ec_p)) > buf_len)
529			buf_len = tmp_len;
530		if ((tmp_len = (size_t)BN_num_bytes(ec_a)) > buf_len)
531			buf_len = tmp_len;
532		if ((tmp_len = (size_t)BN_num_bytes(ec_b)) > buf_len)
533			buf_len = tmp_len;
534		if ((tmp_len = (size_t)BN_num_bytes(ec_gen)) > buf_len)
535			buf_len = tmp_len;
536		if ((tmp_len = (size_t)BN_num_bytes(ec_order)) > buf_len)
537			buf_len = tmp_len;
538		if ((tmp_len = (size_t)BN_num_bytes(ec_cofactor)) > buf_len)
539			buf_len = tmp_len;
540
541		buffer = (unsigned char *)OPENSSL_malloc(buf_len);
542
543		if (buffer == NULL)
544			{
545			perror("OPENSSL_malloc");
546			goto end;
547			}
548
549		ecparam_print_var(out, ec_p, "ec_p", len, buffer);
550		ecparam_print_var(out, ec_a, "ec_a", len, buffer);
551		ecparam_print_var(out, ec_b, "ec_b", len, buffer);
552		ecparam_print_var(out, ec_gen, "ec_gen", len, buffer);
553		ecparam_print_var(out, ec_order, "ec_order", len, buffer);
554		ecparam_print_var(out, ec_cofactor, "ec_cofactor", len,
555			buffer);
556
557		BIO_printf(out, "\n\n");
558
559		BIO_printf(out, "EC_GROUP *get_ec_group_%d(void)\n\t{\n", len);
560		BIO_printf(out, "\tint ok=0;\n");
561		BIO_printf(out, "\tEC_GROUP *group = NULL;\n");
562		BIO_printf(out, "\tEC_POINT *point = NULL;\n");
563		BIO_printf(out, "\tBIGNUM   *tmp_1 = NULL, *tmp_2 = NULL, "
564				"*tmp_3 = NULL;\n\n");
565		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_p_%d, "
566				"sizeof(ec_p_%d), NULL)) == NULL)\n\t\t"
567				"goto err;\n", len, len);
568		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_a_%d, "
569				"sizeof(ec_a_%d), NULL)) == NULL)\n\t\t"
570				"goto err;\n", len, len);
571		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_b_%d, "
572				"sizeof(ec_b_%d), NULL)) == NULL)\n\t\t"
573				"goto err;\n", len, len);
574		if (is_prime)
575			{
576			BIO_printf(out, "\tif ((group = EC_GROUP_new_curve_"
577				"GFp(tmp_1, tmp_2, tmp_3, NULL)) == NULL)"
578				"\n\t\tgoto err;\n\n");
579			}
580		else
581			{
582			/* TODO */
583			goto end;
584			}
585		BIO_printf(out, "\t/* build generator */\n");
586		BIO_printf(out, "\tif ((tmp_1 = BN_bin2bn(ec_gen_%d, "
587				"sizeof(ec_gen_%d), tmp_1)) == NULL)"
588				"\n\t\tgoto err;\n", len, len);
589		BIO_printf(out, "\tpoint = EC_POINT_bn2point(group, tmp_1, "
590				"NULL, NULL);\n");
591		BIO_printf(out, "\tif (point == NULL)\n\t\tgoto err;\n");
592		BIO_printf(out, "\tif ((tmp_2 = BN_bin2bn(ec_order_%d, "
593				"sizeof(ec_order_%d), tmp_2)) == NULL)"
594				"\n\t\tgoto err;\n", len, len);
595		BIO_printf(out, "\tif ((tmp_3 = BN_bin2bn(ec_cofactor_%d, "
596				"sizeof(ec_cofactor_%d), tmp_3)) == NULL)"
597				"\n\t\tgoto err;\n", len, len);
598		BIO_printf(out, "\tif (!EC_GROUP_set_generator(group, point,"
599				" tmp_2, tmp_3))\n\t\tgoto err;\n");
600		BIO_printf(out, "\n\tok=1;\n");
601		BIO_printf(out, "err:\n");
602		BIO_printf(out, "\tif (tmp_1)\n\t\tBN_free(tmp_1);\n");
603		BIO_printf(out, "\tif (tmp_2)\n\t\tBN_free(tmp_2);\n");
604		BIO_printf(out, "\tif (tmp_3)\n\t\tBN_free(tmp_3);\n");
605		BIO_printf(out, "\tif (point)\n\t\tEC_POINT_free(point);\n");
606		BIO_printf(out, "\tif (!ok)\n");
607		BIO_printf(out, "\t\t{\n");
608		BIO_printf(out, "\t\tEC_GROUP_free(group);\n");
609		BIO_printf(out, "\t\tgroup = NULL;\n");
610		BIO_printf(out, "\t\t}\n");
611		BIO_printf(out, "\treturn(group);\n\t}\n");
612	}
613
614	if (!noout)
615		{
616		if (outformat == FORMAT_ASN1)
617			i = i2d_ECPKParameters_bio(out, group);
618		else if (outformat == FORMAT_PEM)
619			i = PEM_write_bio_ECPKParameters(out, group);
620		else
621			{
622			BIO_printf(bio_err,"bad output format specified for"
623				" outfile\n");
624			goto end;
625			}
626		if (!i)
627			{
628			BIO_printf(bio_err, "unable to write elliptic "
629				"curve parameters\n");
630			ERR_print_errors(bio_err);
631			goto end;
632			}
633		}
634
635	if (need_rand)
636		{
637		app_RAND_load_file(NULL, bio_err, (inrand != NULL));
638		if (inrand != NULL)
639			BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
640				app_RAND_load_files(inrand));
641		}
642
643	if (genkey)
644		{
645		EC_KEY *eckey = EC_KEY_new();
646
647		if (eckey == NULL)
648			goto end;
649
650		assert(need_rand);
651
652		if (EC_KEY_set_group(eckey, group) == 0)
653			goto end;
654
655		if (!EC_KEY_generate_key(eckey))
656			{
657			EC_KEY_free(eckey);
658			goto end;
659			}
660		if (outformat == FORMAT_ASN1)
661			i = i2d_ECPrivateKey_bio(out, eckey);
662		else if (outformat == FORMAT_PEM)
663			i = PEM_write_bio_ECPrivateKey(out, eckey, NULL,
664				NULL, 0, NULL, NULL);
665		else
666			{
667			BIO_printf(bio_err, "bad output format specified "
668				"for outfile\n");
669			EC_KEY_free(eckey);
670			goto end;
671			}
672		EC_KEY_free(eckey);
673		}
674
675	if (need_rand)
676		app_RAND_write_file(NULL, bio_err);
677
678	ret=0;
679end:
680	if (ec_p)
681		BN_free(ec_p);
682	if (ec_a)
683		BN_free(ec_a);
684	if (ec_b)
685		BN_free(ec_b);
686	if (ec_gen)
687		BN_free(ec_gen);
688	if (ec_order)
689		BN_free(ec_order);
690	if (ec_cofactor)
691		BN_free(ec_cofactor);
692	if (buffer)
693		OPENSSL_free(buffer);
694	if (in != NULL)
695		BIO_free(in);
696	if (out != NULL)
697		BIO_free_all(out);
698	if (group != NULL)
699		EC_GROUP_free(group);
700	apps_shutdown();
701	OPENSSL_EXIT(ret);
702}
703
704static int ecparam_print_var(BIO *out, BIGNUM *in, const char *var,
705	int len, unsigned char *buffer)
706	{
707	BIO_printf(out, "static unsigned char %s_%d[] = {", var, len);
708	if (BN_is_zero(in))
709		BIO_printf(out, "\n\t0x00");
710	else
711		{
712		int i, l;
713
714		l = BN_bn2bin(in, buffer);
715		for (i=0; i<l-1; i++)
716			{
717			if ((i%12) == 0)
718				BIO_printf(out, "\n\t");
719			BIO_printf(out, "0x%02X,", buffer[i]);
720			}
721		if ((i%12) == 0)
722			BIO_printf(out, "\n\t");
723		BIO_printf(out, "0x%02X", buffer[i]);
724		}
725	BIO_printf(out, "\n\t};\n\n");
726	return 1;
727	}
728#endif
729