1# Makefile.in generated by automake 1.10.2 from Makefile.am.
2# lang/Makefile.  Generated from Makefile.in by configure.
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15
16
17# Makefile.am for libgpg-error.
18# Copyright (C) 2003, 2006 g10 Code GmbH
19# 
20# This file is part of libgpg-error.
21# 
22# libgpg-error is free software; you can redistribute it and/or modify
23# it under the terms of the GNU Lesser General Public License as
24# published by the Free Software Foundation; either version 2.1 of the
25# License, or (at your option) any later version.
26# 
27# libgpg-error is distributed in the hope that it will be useful,
28# but WITHOUT ANY WARRANTY; without even the implied warranty of
29# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
30# GNU Lesser General Public License for more details.
31# 
32# You should have received a copy of the GNU Lesser General Public
33# License along with this program; if not, write to the Free Software
34# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
35
36pkgdatadir = $(datadir)/libgpg-error
37pkglibdir = $(libdir)/libgpg-error
38pkgincludedir = $(includedir)/libgpg-error
39am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
40install_sh_DATA = $(install_sh) -c -m 644
41install_sh_PROGRAM = $(install_sh) -c
42install_sh_SCRIPT = $(install_sh) -c
43INSTALL_HEADER = $(INSTALL_DATA)
44transform = $(program_transform_name)
45NORMAL_INSTALL = :
46PRE_INSTALL = :
47POST_INSTALL = :
48NORMAL_UNINSTALL = :
49PRE_UNINSTALL = :
50POST_UNINSTALL = :
51build_triplet = mipsel-uclibc-linux-gnu26
52host_triplet = mipsel-uclibc-linux-gnu
53subdir = lang
54DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
55ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
56am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
57	$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
58	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
59	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
60	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
61	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
62	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
63	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
64am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
65	$(ACLOCAL_M4)
66mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
67CONFIG_HEADER = $(top_builddir)/config.h
68CONFIG_CLEAN_FILES =
69SOURCES =
70DIST_SOURCES =
71RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
72	html-recursive info-recursive install-data-recursive \
73	install-dvi-recursive install-exec-recursive \
74	install-html-recursive install-info-recursive \
75	install-pdf-recursive install-ps-recursive install-recursive \
76	installcheck-recursive installdirs-recursive pdf-recursive \
77	ps-recursive uninstall-recursive
78RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
79  distclean-recursive maintainer-clean-recursive
80ETAGS = etags
81CTAGS = ctags
82DIST_SUBDIRS = $(SUBDIRS)
83DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
84ACLOCAL = ${SHELL} ${TIMEMACHINE_PATH}/libgpg-error-1.10/missing --run aclocal-1.10
85AMTAR = ${SHELL} ${TIMEMACHINE_PATH}/libgpg-error-1.10/missing --run tar
86AR = mipsel-linux-linux26-ar
87AS = as
88AUTOCONF = ${SHELL} ${TIMEMACHINE_PATH}/libgpg-error-1.10/missing --run autoconf
89AUTOHEADER = ${SHELL} ${TIMEMACHINE_PATH}/libgpg-error-1.10/missing --run autoheader
90AUTOMAKE = ${SHELL} ${TIMEMACHINE_PATH}/libgpg-error-1.10/missing --run automake-1.10
91AWK = gawk
92BUILD_FILEVERSION = 
93BUILD_TIMESTAMP = 
94CC = mipsel-linux-uclibc-gcc
95CCDEPMODE = depmode=gcc3
96CC_FOR_BUILD = cc
97CFLAGS = -I${PKG_INSTALL_DIR}/usr /include
98CPP = mipsel-linux-uclibc-gcc -E
99CPPFLAGS = 
100CYGPATH_W = echo
101DEFS = -DHAVE_CONFIG_H
102DEPDIR = .deps
103DLLTOOL = dlltool
104DSYMUTIL = 
105DUMPBIN = 
106ECHO_C = 
107ECHO_N = -n
108ECHO_T = 
109EGREP = /bin/grep -E
110EXEEXT = 
111FGREP = /bin/grep -F
112GETTEXT_MACRO_VERSION = 0.17
113GMSGFMT = /usr/bin/msgfmt
114GMSGFMT_015 = /usr/bin/msgfmt
115GPG_ERROR_CONFIG_CFLAGS = 
116GPG_ERROR_CONFIG_ISUBDIRAFTER = 
117GPG_ERROR_CONFIG_LIBS = -lgpg-error
118GREP = /bin/grep
119INSTALL = /usr/bin/install -c
120INSTALL_DATA = ${INSTALL} -m 644
121INSTALL_PROGRAM = ${INSTALL}
122INSTALL_SCRIPT = ${INSTALL}
123INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
124INTLLIBS = 
125INTL_MACOSX_LIBS = 
126LD = /projects/hnd/tools/linux/hndtools-mipsel-linux-uclibc-4.2.3/usr/bin/mipsel-linux-uclibc-ld
127LDFLAGS = -L${PKG_INSTALL_DIR}/usr /lib
128LIBGPG_ERROR_LT_AGE = 8
129LIBGPG_ERROR_LT_CURRENT = 8
130LIBGPG_ERROR_LT_REVISION = 0
131LIBICONV = ${TIMEMACHINE_PATH}/gpl_lib/lib/libiconv.a
132LIBINTL = 
133LIBOBJS = 
134LIBS = 
135LIBTOOL = $(SHELL) $(top_builddir)/libtool
136LIPO = 
137LN_S = ln -s
138LTLIBICONV = -L${PKG_INSTALL_DIR}/usr /lib -liconv
139LTLIBINTL = 
140LTLIBOBJS = 
141MAINT = #
142MAKEINFO = ${SHELL} ${TIMEMACHINE_PATH}/libgpg-error-1.10/missing --run makeinfo
143MKDIR_P = /bin/mkdir -p
144MSGFMT = /usr/bin/msgfmt
145MSGFMT_015 = /usr/bin/msgfmt
146MSGMERGE = /usr/bin/msgmerge
147NM = mipsel-linux-linux26-nm
148NMEDIT = 
149OBJDUMP = mipsel-linux-linux26-objdump
150OBJEXT = o
151OTOOL = 
152OTOOL64 = 
153PACKAGE = libgpg-error
154PACKAGE_BUGREPORT = bug-gnupg@gnupg.org
155PACKAGE_NAME = libgpg-error
156PACKAGE_STRING = libgpg-error 1.10
157PACKAGE_TARNAME = libgpg-error
158PACKAGE_URL = 
159PACKAGE_VERSION = 1.10
160PATH_SEPARATOR = :
161POSUB = 
162RANLIB = ranlib
163RC = 
164SED = /bin/sed
165SET_MAKE = 
166SHELL = /bin/sh
167STRIP = mipsel-linux-linux26-strip
168USE_NLS = no
169VERSION = 1.10
170XGETTEXT = /usr/bin/xgettext
171XGETTEXT_015 = /usr/bin/xgettext
172XGETTEXT_EXTRA_OPTIONS = 
173abs_builddir = ${TIMEMACHINE_PATH}/libgpg-error-1.10/lang
174abs_srcdir = ${TIMEMACHINE_PATH}/libgpg-error-1.10/lang
175abs_top_builddir = ${TIMEMACHINE_PATH}/libgpg-error-1.10
176abs_top_srcdir = ${TIMEMACHINE_PATH}/libgpg-error-1.10
177ac_ct_CC = 
178ac_ct_DUMPBIN = 
179am__include = include
180am__leading_dot = .
181am__quote = 
182am__tar = ${AMTAR} chof - "$$tardir"
183am__untar = ${AMTAR} xf -
184bindir = ${exec_prefix}/bin
185build = mipsel-uclibc-linux-gnu26
186build_alias = mipsel-uclibc-linux-gnu26
187build_cpu = mipsel
188build_os = linux-gnu26
189build_vendor = uclibc
190builddir = .
191datadir = ${datarootdir}
192datarootdir = ${prefix}/share
193docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
194dvidir = ${docdir}
195exec_prefix = ${prefix}
196host = mipsel-uclibc-linux-gnu
197host_alias = mipsel-uclibc-linux
198host_cpu = mipsel
199host_os = linux-gnu
200host_vendor = uclibc
201htmldir = ${docdir}
202includedir = ${prefix}/include
203infodir = ${datarootdir}/info
204install_sh = $(SHELL) ${TIMEMACHINE_PATH}/libgpg-error-1.10/install-sh
205libdir = ${exec_prefix}/lib
206libexecdir = ${exec_prefix}/libexec
207localedir = ${datarootdir}/locale
208localstatedir = ${prefix}/var
209lt_ECHO = echo
210mandir = ${datarootdir}/man
211mkdir_p = /bin/mkdir -p
212oldincludedir = /usr/include
213pdfdir = ${docdir}
214prefix = /usr
215program_transform_name = s,x,x,
216psdir = ${docdir}
217sbindir = ${exec_prefix}/sbin
218sharedstatedir = ${prefix}/com
219srcdir = .
220sysconfdir = ${prefix}/etc
221target_alias = mipsel-uclibc-linux-gnu26
222top_build_prefix = ../
223top_builddir = ..
224top_srcdir = ..
225SUBDIRS = cl
226EXTRA_DIST = README
227all: all-recursive
228
229.SUFFIXES:
230$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
231	@for dep in $?; do \
232	  case '$(am__configure_deps)' in \
233	    *$$dep*) \
234	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
235	        && { if test -f $@; then exit 0; else break; fi; }; \
236	      exit 1;; \
237	  esac; \
238	done; \
239	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  lang/Makefile'; \
240	cd $(top_srcdir) && \
241	  $(AUTOMAKE) --gnu  lang/Makefile
242.PRECIOUS: Makefile
243Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
244	@case '$?' in \
245	  *config.status*) \
246	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
247	  *) \
248	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
249	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
250	esac;
251
252$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
253	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
254
255$(top_srcdir)/configure: # $(am__configure_deps)
256	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
257$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
258	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
259
260mostlyclean-libtool:
261	-rm -f *.lo
262
263clean-libtool:
264	-rm -rf .libs _libs
265
266# This directory's subdirectories are mostly independent; you can cd
267# into them and run `make' without going through this Makefile.
268# To change the values of `make' variables: instead of editing Makefiles,
269# (1) if the variable is set in `config.status', edit `config.status'
270#     (which will cause the Makefiles to be regenerated when you run `make');
271# (2) otherwise, pass the desired values on the `make' command line.
272$(RECURSIVE_TARGETS):
273	@failcom='exit 1'; \
274	for f in x $$MAKEFLAGS; do \
275	  case $$f in \
276	    *=* | --[!k]*);; \
277	    *k*) failcom='fail=yes';; \
278	  esac; \
279	done; \
280	dot_seen=no; \
281	target=`echo $@ | sed s/-recursive//`; \
282	list='$(SUBDIRS)'; for subdir in $$list; do \
283	  echo "Making $$target in $$subdir"; \
284	  if test "$$subdir" = "."; then \
285	    dot_seen=yes; \
286	    local_target="$$target-am"; \
287	  else \
288	    local_target="$$target"; \
289	  fi; \
290	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
291	  || eval $$failcom; \
292	done; \
293	if test "$$dot_seen" = "no"; then \
294	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
295	fi; test -z "$$fail"
296
297$(RECURSIVE_CLEAN_TARGETS):
298	@failcom='exit 1'; \
299	for f in x $$MAKEFLAGS; do \
300	  case $$f in \
301	    *=* | --[!k]*);; \
302	    *k*) failcom='fail=yes';; \
303	  esac; \
304	done; \
305	dot_seen=no; \
306	case "$@" in \
307	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
308	  *) list='$(SUBDIRS)' ;; \
309	esac; \
310	rev=''; for subdir in $$list; do \
311	  if test "$$subdir" = "."; then :; else \
312	    rev="$$subdir $$rev"; \
313	  fi; \
314	done; \
315	rev="$$rev ."; \
316	target=`echo $@ | sed s/-recursive//`; \
317	for subdir in $$rev; do \
318	  echo "Making $$target in $$subdir"; \
319	  if test "$$subdir" = "."; then \
320	    local_target="$$target-am"; \
321	  else \
322	    local_target="$$target"; \
323	  fi; \
324	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
325	  || eval $$failcom; \
326	done && test -z "$$fail"
327tags-recursive:
328	list='$(SUBDIRS)'; for subdir in $$list; do \
329	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
330	done
331ctags-recursive:
332	list='$(SUBDIRS)'; for subdir in $$list; do \
333	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
334	done
335
336ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
337	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
338	unique=`for i in $$list; do \
339	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
340	  done | \
341	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
342	      END { if (nonempty) { for (i in files) print i; }; }'`; \
343	mkid -fID $$unique
344tags: TAGS
345
346TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
347		$(TAGS_FILES) $(LISP)
348	tags=; \
349	here=`pwd`; \
350	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
351	  include_option=--etags-include; \
352	  empty_fix=.; \
353	else \
354	  include_option=--include; \
355	  empty_fix=; \
356	fi; \
357	list='$(SUBDIRS)'; for subdir in $$list; do \
358	  if test "$$subdir" = .; then :; else \
359	    test ! -f $$subdir/TAGS || \
360	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
361	  fi; \
362	done; \
363	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
364	unique=`for i in $$list; do \
365	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
366	  done | \
367	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
368	      END { if (nonempty) { for (i in files) print i; }; }'`; \
369	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
370	  test -n "$$unique" || unique=$$empty_fix; \
371	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
372	    $$tags $$unique; \
373	fi
374ctags: CTAGS
375CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
376		$(TAGS_FILES) $(LISP)
377	tags=; \
378	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
379	unique=`for i in $$list; do \
380	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
381	  done | \
382	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
383	      END { if (nonempty) { for (i in files) print i; }; }'`; \
384	test -z "$(CTAGS_ARGS)$$tags$$unique" \
385	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
386	     $$tags $$unique
387
388GTAGS:
389	here=`$(am__cd) $(top_builddir) && pwd` \
390	  && cd $(top_srcdir) \
391	  && gtags -i $(GTAGS_ARGS) $$here
392
393distclean-tags:
394	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
395
396distdir: $(DISTFILES)
397	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
398	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
399	list='$(DISTFILES)'; \
400	  dist_files=`for file in $$list; do echo $$file; done | \
401	  sed -e "s|^$$srcdirstrip/||;t" \
402	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
403	case $$dist_files in \
404	  */*) $(MKDIR_P) `echo "$$dist_files" | \
405			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
406			   sort -u` ;; \
407	esac; \
408	for file in $$dist_files; do \
409	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
410	  if test -d $$d/$$file; then \
411	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
412	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
413	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
414	    fi; \
415	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
416	  else \
417	    test -f $(distdir)/$$file \
418	    || cp -p $$d/$$file $(distdir)/$$file \
419	    || exit 1; \
420	  fi; \
421	done
422	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
423	  if test "$$subdir" = .; then :; else \
424	    test -d "$(distdir)/$$subdir" \
425	    || $(MKDIR_P) "$(distdir)/$$subdir" \
426	    || exit 1; \
427	    distdir=`$(am__cd) $(distdir) && pwd`; \
428	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
429	    (cd $$subdir && \
430	      $(MAKE) $(AM_MAKEFLAGS) \
431	        top_distdir="$$top_distdir" \
432	        distdir="$$distdir/$$subdir" \
433		am__remove_distdir=: \
434		am__skip_length_check=: \
435	        distdir) \
436	      || exit 1; \
437	  fi; \
438	done
439check-am: all-am
440check: check-recursive
441all-am: Makefile
442installdirs: installdirs-recursive
443installdirs-am:
444install: install-recursive
445install-exec: install-exec-recursive
446install-data: install-data-recursive
447uninstall: uninstall-recursive
448
449install-am: all-am
450	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
451
452installcheck: installcheck-recursive
453install-strip:
454	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
455	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
456	  `test -z '$(STRIP)' || \
457	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
458mostlyclean-generic:
459
460clean-generic:
461
462distclean-generic:
463	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
464
465maintainer-clean-generic:
466	@echo "This command is intended for maintainers to use"
467	@echo "it deletes files that may require special tools to rebuild."
468clean: clean-recursive
469
470clean-am: clean-generic clean-libtool mostlyclean-am
471
472distclean: distclean-recursive
473	-rm -f Makefile
474distclean-am: clean-am distclean-generic distclean-tags
475
476dvi: dvi-recursive
477
478dvi-am:
479
480html: html-recursive
481
482info: info-recursive
483
484info-am:
485
486install-data-am:
487
488install-dvi: install-dvi-recursive
489
490install-exec-am:
491
492install-html: install-html-recursive
493
494install-info: install-info-recursive
495
496install-man:
497
498install-pdf: install-pdf-recursive
499
500install-ps: install-ps-recursive
501
502installcheck-am:
503
504maintainer-clean: maintainer-clean-recursive
505	-rm -f Makefile
506maintainer-clean-am: distclean-am maintainer-clean-generic
507
508mostlyclean: mostlyclean-recursive
509
510mostlyclean-am: mostlyclean-generic mostlyclean-libtool
511
512pdf: pdf-recursive
513
514pdf-am:
515
516ps: ps-recursive
517
518ps-am:
519
520uninstall-am:
521
522.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
523	install-strip
524
525.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
526	all all-am check check-am clean clean-generic clean-libtool \
527	ctags ctags-recursive distclean distclean-generic \
528	distclean-libtool distclean-tags distdir dvi dvi-am html \
529	html-am info info-am install install-am install-data \
530	install-data-am install-dvi install-dvi-am install-exec \
531	install-exec-am install-html install-html-am install-info \
532	install-info-am install-man install-pdf install-pdf-am \
533	install-ps install-ps-am install-strip installcheck \
534	installcheck-am installdirs installdirs-am maintainer-clean \
535	maintainer-clean-generic mostlyclean mostlyclean-generic \
536	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
537	uninstall uninstall-am
538
539# Tell versions [3.59,3.63) of GNU make to not export all variables.
540# Otherwise a system limit (for SysV at least) may be exceeded.
541.NOEXPORT:
542