1/** 2 * This file contains definitions of WLAN commands. 3 */ 4 5#ifndef _HOST_H_ 6#define _HOST_H_ 7 8/** PUBLIC DEFINITIONS */ 9#define DEFAULT_AD_HOC_CHANNEL 6 10#define DEFAULT_AD_HOC_CHANNEL_A 36 11 12/** IEEE 802.11 oids */ 13#define OID_802_11_SSID 0x00008002 14#define OID_802_11_INFRASTRUCTURE_MODE 0x00008008 15#define OID_802_11_FRAGMENTATION_THRESHOLD 0x00008009 16#define OID_802_11_RTS_THRESHOLD 0x0000800A 17#define OID_802_11_TX_ANTENNA_SELECTED 0x0000800D 18#define OID_802_11_SUPPORTED_RATES 0x0000800E 19#define OID_802_11_STATISTICS 0x00008012 20#define OID_802_11_TX_RETRYCOUNT 0x0000801D 21#define OID_802_11D_ENABLE 0x00008020 22 23#define cmd_option_waitforrsp 0x0002 24 25/** Host command ID */ 26#define cmd_code_dnld 0x0002 27#define cmd_get_hw_spec 0x0003 28#define cmd_eeprom_update 0x0004 29#define cmd_802_11_reset 0x0005 30#define cmd_802_11_scan 0x0006 31#define cmd_802_11_get_log 0x000b 32#define cmd_mac_multicast_adr 0x0010 33#define cmd_802_11_authenticate 0x0011 34#define cmd_802_11_eeprom_access 0x0059 35#define cmd_802_11_associate 0x0050 36#define cmd_802_11_set_wep 0x0013 37#define cmd_802_11_get_stat 0x0014 38#define cmd_802_3_get_stat 0x0015 39#define cmd_802_11_snmp_mib 0x0016 40#define cmd_mac_reg_map 0x0017 41#define cmd_bbp_reg_map 0x0018 42#define cmd_mac_reg_access 0x0019 43#define cmd_bbp_reg_access 0x001a 44#define cmd_rf_reg_access 0x001b 45#define cmd_802_11_radio_control 0x001c 46#define cmd_802_11_rf_channel 0x001d 47#define cmd_802_11_rf_tx_power 0x001e 48#define cmd_802_11_rssi 0x001f 49#define cmd_802_11_rf_antenna 0x0020 50 51#define cmd_802_11_ps_mode 0x0021 52 53#define cmd_802_11_data_rate 0x0022 54#define cmd_rf_reg_map 0x0023 55#define cmd_802_11_deauthenticate 0x0024 56#define cmd_802_11_reassociate 0x0025 57#define cmd_802_11_disassociate 0x0026 58#define cmd_mac_control 0x0028 59#define cmd_802_11_ad_hoc_start 0x002b 60#define cmd_802_11_ad_hoc_join 0x002c 61 62#define cmd_802_11_query_tkip_reply_cntrs 0x002e 63#define cmd_802_11_enable_rsn 0x002f 64#define cmd_802_11_pairwise_tsc 0x0036 65#define cmd_802_11_group_tsc 0x0037 66#define cmd_802_11_key_material 0x005e 67 68#define cmd_802_11_set_afc 0x003c 69#define cmd_802_11_get_afc 0x003d 70 71#define cmd_802_11_ad_hoc_stop 0x0040 72 73#define cmd_802_11_beacon_stop 0x0049 74 75#define cmd_802_11_mac_address 0x004D 76#define cmd_802_11_eeprom_access 0x0059 77 78#define cmd_802_11_band_config 0x0058 79 80#define cmd_802_11d_domain_info 0x005b 81 82#define cmd_802_11_sleep_params 0x0066 83 84#define cmd_802_11_inactivity_timeout 0x0067 85 86#define cmd_802_11_tpc_cfg 0x0072 87#define cmd_802_11_pwr_cfg 0x0073 88 89#define cmd_802_11_led_gpio_ctrl 0x004e 90 91#define cmd_802_11_subscribe_event 0x0075 92 93#define cmd_802_11_rate_adapt_rateset 0x0076 94 95#define cmd_802_11_tx_rate_query 0x007f 96 97#define cmd_get_tsf 0x0080 98 99#define cmd_bt_access 0x0087 100#define cmd_ret_bt_access 0x8087 101 102#define cmd_fwt_access 0x0095 103#define cmd_ret_fwt_access 0x8095 104 105#define cmd_mesh_access 0x009b 106#define cmd_ret_mesh_access 0x809b 107 108/* For the IEEE Power Save */ 109#define cmd_subcmd_enter_ps 0x0030 110#define cmd_subcmd_exit_ps 0x0031 111#define cmd_subcmd_sleep_confirmed 0x0034 112#define cmd_subcmd_full_powerdown 0x0035 113#define cmd_subcmd_full_powerup 0x0036 114 115/* command RET code, MSB is set to 1 */ 116#define cmd_ret_hw_spec_info 0x8003 117#define cmd_ret_eeprom_update 0x8004 118#define cmd_ret_802_11_reset 0x8005 119#define cmd_ret_802_11_scan 0x8006 120#define cmd_ret_802_11_get_log 0x800b 121#define cmd_ret_mac_control 0x8028 122#define cmd_ret_mac_multicast_adr 0x8010 123#define cmd_ret_802_11_authenticate 0x8011 124#define cmd_ret_802_11_deauthenticate 0x8024 125#define cmd_ret_802_11_associate 0x8012 126#define cmd_ret_802_11_reassociate 0x8025 127#define cmd_ret_802_11_disassociate 0x8026 128#define cmd_ret_802_11_set_wep 0x8013 129#define cmd_ret_802_11_stat 0x8014 130#define cmd_ret_802_3_stat 0x8015 131#define cmd_ret_802_11_snmp_mib 0x8016 132#define cmd_ret_mac_reg_map 0x8017 133#define cmd_ret_bbp_reg_map 0x8018 134#define cmd_ret_rf_reg_map 0x8023 135#define cmd_ret_mac_reg_access 0x8019 136#define cmd_ret_bbp_reg_access 0x801a 137#define cmd_ret_rf_reg_access 0x801b 138#define cmd_ret_802_11_radio_control 0x801c 139#define cmd_ret_802_11_rf_channel 0x801d 140#define cmd_ret_802_11_rssi 0x801f 141#define cmd_ret_802_11_rf_tx_power 0x801e 142#define cmd_ret_802_11_rf_antenna 0x8020 143#define cmd_ret_802_11_ps_mode 0x8021 144#define cmd_ret_802_11_data_rate 0x8022 145 146#define cmd_ret_802_11_ad_hoc_start 0x802B 147#define cmd_ret_802_11_ad_hoc_join 0x802C 148 149#define cmd_ret_802_11_query_tkip_reply_cntrs 0x802e 150#define cmd_ret_802_11_enable_rsn 0x802f 151#define cmd_ret_802_11_pairwise_tsc 0x8036 152#define cmd_ret_802_11_group_tsc 0x8037 153#define cmd_ret_802_11_key_material 0x805e 154 155#define cmd_enable_rsn 0x0001 156#define cmd_disable_rsn 0x0000 157 158#define cmd_act_set 0x0001 159#define cmd_act_get 0x0000 160 161#define cmd_act_get_AES (cmd_act_get + 2) 162#define cmd_act_set_AES (cmd_act_set + 2) 163#define cmd_act_remove_aes (cmd_act_set + 3) 164 165#define cmd_ret_802_11_set_afc 0x803c 166#define cmd_ret_802_11_get_afc 0x803d 167 168#define cmd_ret_802_11_ad_hoc_stop 0x8040 169 170#define cmd_ret_802_11_beacon_stop 0x8049 171 172#define cmd_ret_802_11_mac_address 0x804D 173#define cmd_ret_802_11_eeprom_access 0x8059 174 175#define cmd_ret_802_11_band_config 0x8058 176 177#define cmd_ret_802_11_sleep_params 0x8066 178 179#define cmd_ret_802_11_inactivity_timeout 0x8067 180 181#define cmd_ret_802_11d_domain_info (0x8000 | \ 182 cmd_802_11d_domain_info) 183 184#define cmd_ret_802_11_tpc_cfg (cmd_802_11_tpc_cfg | 0x8000) 185#define cmd_ret_802_11_pwr_cfg (cmd_802_11_pwr_cfg | 0x8000) 186 187#define cmd_ret_802_11_led_gpio_ctrl 0x804e 188 189#define cmd_ret_802_11_subscribe_event (cmd_802_11_subscribe_event | 0x8000) 190 191#define cmd_ret_802_11_rate_adapt_rateset (cmd_802_11_rate_adapt_rateset | 0x8000) 192 193#define cmd_rte_802_11_tx_rate_query (cmd_802_11_tx_rate_query | 0x8000) 194 195#define cmd_ret_get_tsf 0x8080 196 197/* Define action or option for cmd_802_11_set_wep */ 198#define cmd_act_add 0x0002 199#define cmd_act_remove 0x0004 200#define cmd_act_use_default 0x0008 201 202#define cmd_type_wep_40_bit 0x0001 203#define cmd_type_wep_104_bit 0x0002 204 205#define cmd_NUM_OF_WEP_KEYS 4 206 207#define cmd_WEP_KEY_INDEX_MASK 0x3fff 208 209/* Define action or option for cmd_802_11_reset */ 210#define cmd_act_halt 0x0003 211 212/* Define action or option for cmd_802_11_scan */ 213#define cmd_bss_type_bss 0x0001 214#define cmd_bss_type_ibss 0x0002 215#define cmd_bss_type_any 0x0003 216 217/* Define action or option for cmd_802_11_scan */ 218#define cmd_scan_type_active 0x0000 219#define cmd_scan_type_passive 0x0001 220 221#define cmd_scan_radio_type_bg 0 222 223#define cmd_scan_probe_delay_time 0 224 225/* Define action or option for cmd_mac_control */ 226#define cmd_act_mac_rx_on 0x0001 227#define cmd_act_mac_tx_on 0x0002 228#define cmd_act_mac_loopback_on 0x0004 229#define cmd_act_mac_wep_enable 0x0008 230#define cmd_act_mac_int_enable 0x0010 231#define cmd_act_mac_multicast_enable 0x0020 232#define cmd_act_mac_broadcast_enable 0x0040 233#define cmd_act_mac_promiscuous_enable 0x0080 234#define cmd_act_mac_all_multicast_enable 0x0100 235#define cmd_act_mac_strict_protection_enable 0x0400 236 237/* Define action or option for cmd_802_11_radio_control */ 238#define cmd_type_auto_preamble 0x0001 239#define cmd_type_short_preamble 0x0002 240#define cmd_type_long_preamble 0x0003 241 242#define TURN_ON_RF 0x01 243#define RADIO_ON 0x01 244#define RADIO_OFF 0x00 245 246#define SET_AUTO_PREAMBLE 0x05 247#define SET_SHORT_PREAMBLE 0x03 248#define SET_LONG_PREAMBLE 0x01 249 250/* Define action or option for CMD_802_11_RF_CHANNEL */ 251#define cmd_opt_802_11_rf_channel_get 0x00 252#define cmd_opt_802_11_rf_channel_set 0x01 253 254/* Define action or option for cmd_802_11_rf_tx_power */ 255#define cmd_act_tx_power_opt_get 0x0000 256#define cmd_act_tx_power_opt_set_high 0x8007 257#define cmd_act_tx_power_opt_set_mid 0x8004 258#define cmd_act_tx_power_opt_set_low 0x8000 259 260#define cmd_act_tx_power_index_high 0x0007 261#define cmd_act_tx_power_index_mid 0x0004 262#define cmd_act_tx_power_index_low 0x0000 263 264/* Define action or option for cmd_802_11_data_rate */ 265#define cmd_act_set_tx_auto 0x0000 266#define cmd_act_set_tx_fix_rate 0x0001 267#define cmd_act_get_tx_rate 0x0002 268 269#define cmd_act_set_rx 0x0001 270#define cmd_act_set_tx 0x0002 271#define cmd_act_set_both 0x0003 272#define cmd_act_get_rx 0x0004 273#define cmd_act_get_tx 0x0008 274#define cmd_act_get_both 0x000c 275 276/* Define action or option for cmd_802_11_ps_mode */ 277#define cmd_type_cam 0x0000 278#define cmd_type_max_psp 0x0001 279#define cmd_type_fast_psp 0x0002 280 281/* Define action or option for cmd_bt_access */ 282enum cmd_bt_access_opts { 283 /* The bt commands start at 5 instead of 1 because the old dft commands 284 * are mapped to 1-4. These old commands are no longer maintained and 285 * should not be called. 286 */ 287 cmd_act_bt_access_add = 5, 288 cmd_act_bt_access_del, 289 cmd_act_bt_access_list, 290 cmd_act_bt_access_reset, 291 cmd_act_bt_access_set_invert, 292 cmd_act_bt_access_get_invert 293}; 294 295/* Define action or option for cmd_fwt_access */ 296enum cmd_fwt_access_opts { 297 cmd_act_fwt_access_add = 1, 298 cmd_act_fwt_access_del, 299 cmd_act_fwt_access_lookup, 300 cmd_act_fwt_access_list, 301 cmd_act_fwt_access_list_route, 302 cmd_act_fwt_access_list_neighbor, 303 cmd_act_fwt_access_reset, 304 cmd_act_fwt_access_cleanup, 305 cmd_act_fwt_access_time, 306}; 307 308/* Define action or option for cmd_mesh_access */ 309enum cmd_mesh_access_opts { 310 cmd_act_mesh_get_ttl = 1, 311 cmd_act_mesh_set_ttl, 312 cmd_act_mesh_get_stats, 313 cmd_act_mesh_get_anycast, 314 cmd_act_mesh_set_anycast, 315}; 316 317/** Card Event definition */ 318#define MACREG_INT_CODE_TX_PPA_FREE 0x00000000 319#define MACREG_INT_CODE_TX_DMA_DONE 0x00000001 320#define MACREG_INT_CODE_LINK_LOSE_W_SCAN 0x00000002 321#define MACREG_INT_CODE_LINK_LOSE_NO_SCAN 0x00000003 322#define MACREG_INT_CODE_LINK_SENSED 0x00000004 323#define MACREG_INT_CODE_CMD_FINISHED 0x00000005 324#define MACREG_INT_CODE_MIB_CHANGED 0x00000006 325#define MACREG_INT_CODE_INIT_DONE 0x00000007 326#define MACREG_INT_CODE_DEAUTHENTICATED 0x00000008 327#define MACREG_INT_CODE_DISASSOCIATED 0x00000009 328#define MACREG_INT_CODE_PS_AWAKE 0x0000000a 329#define MACREG_INT_CODE_PS_SLEEP 0x0000000b 330#define MACREG_INT_CODE_MIC_ERR_MULTICAST 0x0000000d 331#define MACREG_INT_CODE_MIC_ERR_UNICAST 0x0000000e 332#define MACREG_INT_CODE_WM_AWAKE 0x0000000f 333#define MACREG_INT_CODE_ADHOC_BCN_LOST 0x00000011 334#define MACREG_INT_CODE_RSSI_LOW 0x00000019 335#define MACREG_INT_CODE_SNR_LOW 0x0000001a 336#define MACREG_INT_CODE_MAX_FAIL 0x0000001b 337#define MACREG_INT_CODE_RSSI_HIGH 0x0000001c 338#define MACREG_INT_CODE_SNR_HIGH 0x0000001d 339#define MACREG_INT_CODE_MESH_AUTO_STARTED 0x00000023 340 341#endif /* _HOST_H_ */ 342